Summary:
For the sake of consistency, `cmd+r` should just post a refresh notification. This way other tools can also observe and react to the refresh without ugly hacks.
Closes https://github.com/facebook/react-native/pull/2175
Github Author: Tj <tfallon@mail.depaul.edu>
Summary:
Moved the view creation & property binding logic out of RCTUIManager into a separate RCTComponentData class - this follows the pattern used with the bridge.
I've also updated the property binding to use pre-allocated blocks for setting the values, which is more efficient than the previous system that re-contructed the selectors each time it was called. This should improve view update performance significantly.
Summary:
Add a new bridge delegate protocol to allow a more flexible bridge configuration.
For now it just support the pre-existent configurations + providing the JavaScript
source to the bridge, that should allow pre-loading sources.
Summary:
Occasionally people create RCTBridgeModule subclasses or base classes that are not intended to be accessed from JS, and so they don't export them. This was previously flagged as an error by the system. I've now downgraded this error to a warning at startup, and deferred the redbox error until the module is directly accessed by native or JS code.
Summary:
Remove `RCTGetExecutorID` and `RCTSetExecutorID`, it wasn't used anymore since
the bridge was refactored into `RCTBridge` and `RCTBatchedBridge`.
Summary:
@public
The info about bridge modules (such as id, name, queue, methods...) was spread
across arrays & dictionaries on the bridge, move it into a specific class.
It also removes a lot of information that was statically cached, and now have
the same lifecycle of the bridge.
Also moved RCTModuleMethod, RCTFrameUpdate and RCTBatchedBridge into it's own
files, for organization sake.
NOTE: This diff seems huge, but most of it was just moving code :)
Test Plan:
Tested UIExplorer & UIExplorer tests, Catalyst, MAdMan and Groups. Everything
looks fine.
Summary:
@public
I've added an alert to notify when the profile has been generated, but it was
being created out of the main thread.
Test Plan:
Launch the UIExplorer, start and stop profiling, an alert should show up, and
everything should just keep working as expected.
Summary:
@public
When the profile is initialized, it automatically hooks into every method of
the bridge modules, that was causing `+initialize` to be called twice.
Also add a popup to notify the user that the profile has been created.
Test Plan:
Run the UIExplorer, start the profiler, try to rage shake to open the dev menu
again. It should now work, and show an alertview with some information once the
profile is stopped.
Summary:
Live reload is disabled when an error has occurred. This requires the developer to fix the error and then switch to the simulator to reload the device manually; impacting developer flow and increasing alt tabbing. This pull request fixes that by allowing live reload to work even on errors.
This fixes issue: #1343.
Closes https://github.com/facebook/react-native/pull/1549
Github Author: Ruben Niculcea <ruben.niculcea@gmail.com>
Test Plan: Imported from GitHub, without a `Test Plan:` line.
Summary:
@public
That was eventually being released before all the queues had been cleared.
Update it so the each modules' queue is immediately invalidated after sending
the `-invalidate` message to it, and introduce an intentional retain cycle so
the bridge is only released together with all modules, when all the messages
have been dispatched.
Test Plan: Launch the UIExplorer, and reload it, like, a lot.
Summary:
@public
Add PerformanceLogger to keep track of JS download, initial script execution and
full TTI.
Test Plan:
The Native side currently calls `addTimespans` when it's finish initializing
with the six values (start and end for the three events), so I just checked it
with a `PerformanceLogger.logTimespans()` at the end of the function.
```
2015-06-18 16:47:19.096 [info][tid:com.facebook.React.JavaScript] "ScriptDownload: 48ms"
2015-06-18 16:47:19.096 [info][tid:com.facebook.React.JavaScript] "ScriptExecution: 106ms"
2015-06-18 16:47:19.096 [info][tid:com.facebook.React.JavaScript] "TTI: 293ms"
```
Summary:
@public
Add marker to show JavaScript download duration + flow arrows to show the origin
of the UI blocks being flushed.
Also fixed the condition on `RCTPerfStats`, UI and JS graphs were being created
at startup time, now they're just created on the first time they're shown.
Test Plan:
The markers:
{F22577660}
To check the FPS graph, enable it on the DevMenu, and it should appear initially
empty, instead of previously filled as before.
Summary:
@public
The current implementation of `MessageQueue` is huge, over-complicated and spread
across `MethodQueue`, `MethodQueueMixin`, `BatchedBridge` and `BatchedBridgeFactory`
Refactored in a simpler way, were it's just a `MessageQueue` class and `BatchedBridge`
is only an instance of it.
Test Plan:
I had to make some updates to the tests, but no real update to the native side.
There's also tests covering the `remoteAsync` methods, and more integration tests for UIExplorer.
Verified whats being used by Android, and it should be safe, also tests Android tests have been pretty reliable.
Manually testing: Create a big hierarchy, like `<ListView>` example. Use the `TimerMixin` example to generate multiple calls.
Test the failure callback on the `Geolocation` example.
All the calls go through this entry point, so it's hard to miss if it's broken.
Summary:
@public
This removes the last piece of data that was still stored on the DATA section,
`RCT_IMPORT_METHOD`. JS calls now dynamically populate a lookup table simultaneously
on JS and Native, instead of creating a mapping at load time.
Test Plan: Everything still runs, tests are green.
Summary:
@public
I've increased the warning levels in the OSS frameworks, which caught a bunch of minor issues. I also fixed some new errors in Xcode 7 relating to designated initializers and TLS security.
Test Plan:
* Test the sample apps and make sure they still work.
* Run tests.
Summary:
@public
Include `js_name` and `__LINE__` on exported methods' generated names + use the
method implementation instead of `objc_msgSend` on the bridge, so it still works
in case of clashing.
Test Plan: Everything still working, otherwise it'd crash at startup.
Summary:
@public
The information we required about the exported methods were previously stored
on the binary's DATA section, which didn't allow to access methods on different
static libraries, or in any dynamic library at all. Instead of fetching information
from all the DATA segments, this diff changes the macro in order to create a
new method, that returns the required information about the original method. The
module itself is registered at load time, and on the bridge initialization all
the auto-generated methods are called to gather the methods' information.
Test Plan:
UIExplorer previously had a dependency on `RCTTest`, because it had a `TestModule`
that had to be on the same library. `RCTTest` is now a dependency of
`UIExplorerIntegrationTests`. So the tests themselves running should test it.
Summary:
@public
This is the first of a few diffs that change the way the executors are handled
by the bridge.
For they are just promoted to modules, so they are automatically loaded by the bridge.
Test Plan:
Tested on UIExplorer, Catalyst and MAdMan.
Tested all the 3 executors, everything looks fine.
Summary:
@public
`[Bridge] Add support for JS async functions to RCT_EXPORT_METHOD` was imported but broke some internal code, reverting the `MessageQueue` that caused the issues and add a test, since the method is not used yet.
Test Plan: Run the test o/
Summary:
Adds support for JS async methods and helps guide people writing native modules w.r.t. the callbacks. With this diff, on the native side you write:
```objc
RCT_EXPORT_METHOD(getValueAsync:(NSString *)key
resolver:(RCTPromiseResolver)resolve
rejecter:(RCTPromiseRejecter)reject)
{
NSError *error = nil;
id value = [_nativeDataStore valueForKey:key error:&error];
// "resolve" and "reject" are automatically defined blocks that take
// any object (nil is OK) and an NSError, respectively
if (!error) {
resolve(value);
} else {
reject(error);
}
}
```
On the JS side, you can write:
```js
var {DemoDataStore} = require('react-native').NativeModules;
DemoDataStore.getValueAsync('sample-key').then((value) => {
console.log('Got:', value);
}, (error) => {
console.error(error);
// "error" is an Error object whose message is the NSError's description.
// The NSError's code and domain are also set, and the native trace i
Closes https://github.com/facebook/react-native/pull/1232
Github Author: James Ide <ide@jameside.com>
Test Plan: Imported from GitHub, without a `Test Plan:` line.
Summary:
@public
For every call that comes from JS to Native we'd call dispatch_async so the
method would be cllead on the queue/thread it's expecting. This diff
buckets the calls by target queue, dispatches only once to that queue, and then
call all the methods for it inside the same dispatch.
Test Plan: {F22510090}
Summary:
@public
Bridge modules were being invalidate on the main thread, what could lead to
racing conditions, move the calls to invalidate on happen to the module's
methodQueue
Test Plan: Run the tests
Summary:
@public
Add `RCT_DEV`-only profiling hooks to every method in every bridge modules to
add a little bit more detail to the timeline profile.
Test Plan: {F22522834}
Summary:
Adds support for JS async methods and helps guide people writing native modules w.r.t. the callbacks. With this diff, on the native side you write:
```objc
RCT_EXPORT_METHOD(getValueAsync:(NSString *)key
resolver:(RCTPromiseResolver)resolve
rejecter:(RCTPromiseRejecter)reject)
{
NSError *error = nil;
id value = [_nativeDataStore valueForKey:key error:&error];
// "resolve" and "reject" are automatically defined blocks that take
// any object (nil is OK) and an NSError, respectively
if (!error) {
resolve(value);
} else {
reject(error);
}
}
```
On the JS side, you can write:
```js
var {DemoDataStore} = require('react-native').NativeModules;
DemoDataStore.getValueAsync('sample-key').then((value) => {
console.log('Got:', value);
}, (error) => {
console.error(error);
// "error" is an Error object whose message is the NSError's description.
// The NSError's code and domain are also set, and the native trace i
Closes https://github.com/facebook/react-native/pull/1232
Github Author: James Ide <ide@jameside.com>
Test Plan: Imported from GitHub, without a `Test Plan:` line.
Test plan: broke catalyst apps
Summary: This reverts commit 9fba6a360dc5f8bf.
fbobjc/Tools/revert
Reverter: jprado
@build-break
commit 9fba6a360dc5f8bf014f3d3c584c545b16da5100
Author: Tadeu Zagallo <tadeuzagallo@fb.com>
AuthorDate: Thu May 28 08:29:19 2015 -0700
Commit: Service User <svcscm@fb.com>
CommitDate: Thu May 28 09:53:53 2015 -0700
[ReactNative] Add completionBlock to -[RCTBridge enqueueJSCall:args:]
Summary:
@public
Allow to pass an optional completion block to the bridge JS calls.
The block will be called from the JS thread, after the javascript has finished
running and the returned calls have been processed/dispatched to the native modules.
Test Plan: Added `testCallbackIsCalledOnTheRightTime` to `RKBatchedBridgeTests`
Summary:
@public
Allow to pass an optional completion block to the bridge JS calls.
The block will be called from the JS thread, after the javascript has finished
running and the returned calls have been processed/dispatched to the native modules.
Test Plan: Added `testCallbackIsCalledOnTheRightTime` to `RKBatchedBridgeTests`
Summary:
D2052669 introduced a block for objects that had to be invalidated on the main
thread, but after the JS thread objects, but the block was being dispatched on
the JS thread.
@public
Test Plan:
I added `RCTAssertMainThread()` to the `mainThreadInvalidate` block, it was
crashing on reload, but now it should work as expected.
Pieter De Baets
Nick Lockwood
Tj
Tadeu Zagallo
Alex Kotliarskyi
Ruben Niculcea
James Ide
David Callahan
Chace Liang
John Harper
Jason Prado
Christopher Chedeau