Summary:
public
The implementation of the `methodQueue` lazy initializer in `RCTModuleData` could result in the queue being set twice, because calling `methodQueue` for a module that hasn't been instantiated would call `RCTModuleData.instance` to create the module, which itself calls `methodQueue`.
It's not clear if this was causing a bug, but it may be related to an occasional bug where the `RCTViewManager.methodQueue` returns nil.
Reviewed By: majak
Differential Revision: D2783320
fb-gh-sync-id: 9194da0fd7392f63825da1f5c450363dd300b635
Summary:
public
Currently, we wait to invoke `-flushUIBlocks` until the JavaScript batch to native has completed. This means we may be waiting an unnecessarily long time to perform view hierarchy changes and prop changes.
By instead invoking this after each chunk of enqueued UI blocks, we can perform some updates more eagerly, increasing our utilization of the main thread while splitting up the amount of time we spend running upon it.
This shouldn't affect layout, which is still tied to `-batchDidComplete`, so any visual inconsistencies should be limited to prop changes, which seems acceptable for the dramatic improvement in performance.
Reviewed By: javache
Differential Revision: D2658552
fb-gh-sync-id: 6d4560e21d7da1b02d2f30d1860d60735f11c4b5
Summary: public
The `bridge.modules` dictionary provides access to all native modules, but this API requires that every module is initialized in advance so that any module can be accessed.
This diff introduces a better API that will allow modules to be initialized lazily as they are needed, and deprecates `bridge.modules` (modules that use it will still work, but should be rewritten to use `bridge.moduleClasses` or `-[bridge moduleForName/Class:` instead.
The rules are now as follows:
* Any module that overrides `init` or `setBridge:` will be initialized on the main thread when the bridge is created
* Any module that implements `constantsToExport:` will be initialized later when the config is exported (the module itself will be initialized on a background queue, but `constantsToExport:` will still be called on the main thread.
* All other modules will be initialized lazily when a method is first called on them.
These rules may seem slightly arcane, but they have the advantage of not violating any assumptions that may have been made by existing code - any module written under the original assumption that it would be initialized synchronously on the main thread when the bridge is created should still function exactly the same, but modules that avoid overriding `init` or `setBridge:` will now be loaded lazily.
I've rewritten most of the standard modules to take advantage of this new lazy loading, with the following results:
Out of the 65 modules included in UIExplorer:
* 16 are initialized on the main thread when the bridge is created
* A further 8 are initialized when the config is exported to JS
* The remaining 41 will be initialized lazily on-demand
Reviewed By: jspahrsummers
Differential Revision: D2677695
fb-gh-sync-id: 507ae7e9fd6b563e89292c7371767c978e928f33
Summary: public
Added lightweight genarics annotations to make the code more readable and help the compiler catch bugs.
Fixed some type bugs and improved bridge validation in a few places.
Reviewed By: javache
Differential Revision: D2600189
fb-gh-sync-id: f81e22f2cdc107bf8d0b15deec6d5b83aacc5b56
Summary:
Moved the view creation & property binding logic out of RCTUIManager into a separate RCTComponentData class - this follows the pattern used with the bridge.
I've also updated the property binding to use pre-allocated blocks for setting the values, which is more efficient than the previous system that re-contructed the selectors each time it was called. This should improve view update performance significantly.
Summary:
This introduces a new `RCTResponseErrorBlock` block type that allows a bridge module writer to call it with an `NSError` instance rather than a dictionary.
Summary:
@public
The info about bridge modules (such as id, name, queue, methods...) was spread
across arrays & dictionaries on the bridge, move it into a specific class.
It also removes a lot of information that was statically cached, and now have
the same lifecycle of the bridge.
Also moved RCTModuleMethod, RCTFrameUpdate and RCTBatchedBridge into it's own
files, for organization sake.
NOTE: This diff seems huge, but most of it was just moving code :)
Test Plan:
Tested UIExplorer & UIExplorer tests, Catalyst, MAdMan and Groups. Everything
looks fine.
Summary:
@public
Include `js_name` and `__LINE__` on exported methods' generated names + use the
method implementation instead of `objc_msgSend` on the bridge, so it still works
in case of clashing.
Test Plan: Everything still working, otherwise it'd crash at startup.
Summary:
@public
The information we required about the exported methods were previously stored
on the binary's DATA section, which didn't allow to access methods on different
static libraries, or in any dynamic library at all. Instead of fetching information
from all the DATA segments, this diff changes the macro in order to create a
new method, that returns the required information about the original method. The
module itself is registered at load time, and on the bridge initialization all
the auto-generated methods are called to gather the methods' information.
Test Plan:
UIExplorer previously had a dependency on `RCTTest`, because it had a `TestModule`
that had to be on the same library. `RCTTest` is now a dependency of
`UIExplorerIntegrationTests`. So the tests themselves running should test it.
Summary:
Adds support for JS async methods and helps guide people writing native modules w.r.t. the callbacks. With this diff, on the native side you write:
```objc
RCT_EXPORT_METHOD(getValueAsync:(NSString *)key
resolver:(RCTPromiseResolver)resolve
rejecter:(RCTPromiseRejecter)reject)
{
NSError *error = nil;
id value = [_nativeDataStore valueForKey:key error:&error];
// "resolve" and "reject" are automatically defined blocks that take
// any object (nil is OK) and an NSError, respectively
if (!error) {
resolve(value);
} else {
reject(error);
}
}
```
On the JS side, you can write:
```js
var {DemoDataStore} = require('react-native').NativeModules;
DemoDataStore.getValueAsync('sample-key').then((value) => {
console.log('Got:', value);
}, (error) => {
console.error(error);
// "error" is an Error object whose message is the NSError's description.
// The NSError's code and domain are also set, and the native trace i
Closes https://github.com/facebook/react-native/pull/1232
Github Author: James Ide <ide@jameside.com>
Test Plan: Imported from GitHub, without a `Test Plan:` line.
Summary:
Adds support for JS async methods and helps guide people writing native modules w.r.t. the callbacks. With this diff, on the native side you write:
```objc
RCT_EXPORT_METHOD(getValueAsync:(NSString *)key
resolver:(RCTPromiseResolver)resolve
rejecter:(RCTPromiseRejecter)reject)
{
NSError *error = nil;
id value = [_nativeDataStore valueForKey:key error:&error];
// "resolve" and "reject" are automatically defined blocks that take
// any object (nil is OK) and an NSError, respectively
if (!error) {
resolve(value);
} else {
reject(error);
}
}
```
On the JS side, you can write:
```js
var {DemoDataStore} = require('react-native').NativeModules;
DemoDataStore.getValueAsync('sample-key').then((value) => {
console.log('Got:', value);
}, (error) => {
console.error(error);
// "error" is an Error object whose message is the NSError's description.
// The NSError's code and domain are also set, and the native trace i
Closes https://github.com/facebook/react-native/pull/1232
Github Author: James Ide <ide@jameside.com>
Test Plan: Imported from GitHub, without a `Test Plan:` line.
Summary:
External modules are any Objective-C class in which the implementation is private. This currently will be most useful for Swift classes but also has potential to allow exposing methods on 3rd party libraries to the bridge.
Closes https://github.com/facebook/react-native/pull/982
Github Author: Robert Payne <robertpayne@me.com>
Test Plan: Imported from GitHub, without a `Test Plan:` line.
Summary:
cc @a2 @nicklockwood
This diff introduces a new macro called `RCT_EXPORT_NAMED_METHOD`, which is like `RCT_EXPORT_METHOD` but lets you choose the name of the method in JS. This diff is backwards compatible with the `RCT_EXPORT_METHOD` and legacy `RCT_EXPORT` macros.
The entries in the data segment now contain `__func__`, the Obj-C selector signature, and the JS name. If the JS name is `NULL`, we take the legacy `RCT_EXPORT` code path. If the JS name is an empty string, we use the Obj-C selector's name up to the first colon (that is, the behavior of `RCT_EXPORT_METHOD`).
Since there are three values in each data segment entry, the macros now specify 1-byte alignment. Without the byte alignment, the compiler defaults to 2-byte alignment meaning that each entry takes up 4 bytes instead of 3. The extra byte isn't a concern but being explicit about the alignment should reduce compiler surprises.
Closes https://github.com/facebook/react-native/pull/802
Github Author: James Ide <ide@jameside.com>
Test Plan: Imported from GitHub, without a `Test Plan:` line.
Nick Lockwood
Justin Spahr-Summers
Marc Horowitz
Pieter De Baets
Alex Akers
Tadeu Zagallo
James Ide
Chace Liang
Robert Payne
Ben Hiller