Summary:
Add a new bridge delegate protocol to allow a more flexible bridge configuration.
For now it just support the pre-existent configurations + providing the JavaScript
source to the bridge, that should allow pre-loading sources.
Summary:
Fixes#2126
`RCTBatchedBridge` didn't implement `bundleURL`, that was available on the public
bridge interface, so it'd always be `nil`, and setting it would just be ignored.
Summary:
Occasionally people create RCTBridgeModule subclasses or base classes that are not intended to be accessed from JS, and so they don't export them. This was previously flagged as an error by the system. I've now downgraded this error to a warning at startup, and deferred the redbox error until the module is directly accessed by native or JS code.
Summary:
This introduces event counts to make sure JS doesn't set out of date values on
native text inputs, which can cause dropped characters and can mess with
autocomplete, and obviates the need for the input buffering which added lag and
complexity to the component. Made sure to test simulated super-slow JS text
event processing to make sure characters aren't dropped, as well as typing
obviously correctable words and making sure autocomplete works as expected.
TextInput is now a controlled input by default without causing any issues for
most cases, so I removed the `controlled` prop.
Fixes selection state jumping by restoring it after setting new text values, so
highlighting the middle of some text in the new ReWrite example and hitting
space will replace that selection with an underscore and keep the cursor at a
sensible position as expected, instead of jumping to the end.
Ads `maxLength` prop to support the most commonly needed syncronous behavior:
preventing the user from typing too many characters. It can also be used to
prevent users from continuing to type after entering special characters by
changing it to the current length after a regex match. Made sure to verify it
works well with pasted input (including in the middle of existing text),
truncating it and collapsing the selection the same way it does on the web.
Fixes bug in TextEventsExample where it wouldn't show the submit and end events,
even though there were firing correctly.
Summary:
React Native will now use JSONKit if it's already available in the project, otherwise it will fall back to using NSJSONSerialization as before. This provides a small performance boost to JSON parsing in some cases.
Summary:
The context wasn't being explicitly released before, since it'd be immediately
released. Now that the executors are bridge modules, it was only being deallocated
when the modules were released, what caused the threads to not be released at all.
Summary:
dispatch_semaphore_wait with DISPATCH_TIME_NOW don't wait for the semaphore. It just test whether there's a signal and return the result.
So the line "dispatch_semaphore_wait(semaphore, DISPATCH_TIME_NOW);" does nothing here. It seems like a bug, but each executing in js thread will be queued, so it's safe to remove the unused semaphore instead of wait for it.
Closes https://github.com/facebook/react-native/pull/1915
Github Author: DengYun <tdzl2003@gmail.com>
Summary:
Added Gzip function to RCTUtils. This uses dlopen to load the zlib library at runtime so there's no need to link it into your project.
The main reason for this feature is to support gzipping of HTTP request bodies. Now, if you add 'Content-Encoding:gzip' to your request headers when using XMLHttpRequest, your request body will be automatically gzipped on the native side before sending.
(Note: Gzip decoding of *response* bodies is handled automatically by iOS, and was already available).
Summary:
Remove `RCTGetExecutorID` and `RCTSetExecutorID`, it wasn't used anymore since
the bridge was refactored into `RCTBridge` and `RCTBatchedBridge`.
Summary:
Every once in a while a guard is forgotten somewhere and the redbox is gone. I
want to remove the guards, but for that the stack traces have to be symbolicated
on the native side. So for now it just adds yet another check, in case a guard
is missing on JS.
Summary:
RCTCache had really bad insertion performance when the cache was full due to having to LRU-sort the entries. This was making color
animations very slow.
I've fixed this in two ways:
1) by removing the sort and doing a linear search to remove old entries, which changes insertion perf to O(n) in the worst case instead of O(n log n) or even (n2).
2) by reducing the size of the color cache to 128 from 1024, which should be fine for normal use, without penalising animation performance.
Separately, border colors were not being retained, which caused crashes when the color cache was cleared. I've fixed that by retaining the border colors inside RCTView.
Summary:
Dynamic Text Sizes for Text component.
Text gains new prop - allowFontScaling (true by default).
There is also AccessibilityManager module that allows you to tune multipliers per each content size category, but predefined multipliers are there.
This could potentially break some apps so please test carefully.
Summary:
Get the system font instead of Helvetica programmatically and add a virtual fontName called "System" that defaults to whatever the current system font is.
#1611
Closes https://github.com/facebook/react-native/pull/1635
Github Author: LYK <dalinaum@gmail.com>
Summary:
Image source uri's prefixed with ~ are expanded into a full path to
the app directory.
For example: `~/Documents/foo.png` is expanded into `Users/arbesfeld/Library/Developer/CoreSimulator/Devices/977988DF-A8BC-4CE5-A27A-75807A6DF085/data/Containers/Data/Application/CBEFC261-5900-4EF9-8646-603BC57B094A/Documents/foo.png`.
This lets us store and use images from the application home directory with the `Image` component:
```
<Image source={{uri: '~/Documents/foo.png', width: 300, height: 300}} />
```
Resolves#1178
Closes https://github.com/facebook/react-native/pull/1740
Github Author: Matthew Arbesfeld <arbesfeld@gmail.com>
Summary:
Fixes#1809
Even if a bridge has more than one root view, it's not supported by the js side
right now, and it will keep warning that those timespans had already been
recorded.
Summary:
The context wasn't being explicitly released before, since it'd be immediately
released. Now that the executors are bridge modules, it was only being deallocated
when the modules were released, what caused the threads to not be released at all.
Summary:
This introduces a new `RCTResponseErrorBlock` block type that allows a bridge module writer to call it with an `NSError` instance rather than a dictionary.
Summary:
I encountered a crash when `RCTCurrentThreadName` called `dispatch_get_current_queue`. There are reports of it crashing e.g. https://github.com/CocoaLumberjack/CocoaLumberjack/issues/108 so better not to call it at all, plus it is deprecated.
Since we still want helpful debugging information, use `DISPATCH_CURRENT_QUEUE_LABEL` instead. It's kind of strange that this constant is defined to be NULL and the docs for `dispatch_get_queue_label` say not to pass in NULL, but in practice `DISPATCH_CURRENT_QUEUE_LABEL` is provided by the iOS SDK and works correctly.
Closes https://github.com/facebook/react-native/pull/1868
Github Author: James Ide <ide@jameside.com>
Summary:
Fixes a crash due to the selector regex not knowing about the nullability annotations. Adds support for both the core annotations `__nullable` and `__nonnull` plus their shorthand counterparts `nullable` and `nonnull`.
Objective-C allows the shorthand versions only at the front of a parameter type declaration like `(nullable NSString *)` but the regex will pick up `(NSString * nullable)` too. This shouldn't cause any adverse effects and I left the code this way to keep the regex readable.
Fixes#1795
Closes https://github.com/facebook/react-native/pull/1796
Github Author: James Ide <ide@jameside.com>
Test Plan:
Wrote a bridge method that uses a nullability annotation and verified that it didn't cause the app to crash:
```
RCT_EXPORT_METHOD(method:(nullable NSNumber *)reactTag)
{
}
```
Also added a nullable annotation to RCTTest.
Summary:
Should close this issue and successfully pass iTunes Connect validation.
Closes https://github.com/facebook/react-native/pull/1722
Github Author: Matt Revell <mattrevell82@me.com>
Test Plan: Imported from GitHub, without a `Test Plan:` line.
Summary:
When `RCTGetExecutorID` was a static function in the header file, it would return nil when the app was running with ASan enabled even though directly calling `objc_getAssociatedObject(executor, RCTJavaScriptExecutorID)` returned the correct ID as an NSNumber. Moving this function into the .m file fixes this issue.
Closes https://github.com/facebook/react-native/pull/1712
Github Author: James Ide <ide@jameside.com>
Test Plan: Run the UIExplorer with ASan enabled in Xcode 7. Before this diff, the app would just hang since the executor was unable to read a valid ID and so it would bail out from running JS. With this diff the executor runs the JS and the UIExplorer works fine.
Summary:
This adds the Keyboard animation type for when you want to animate UI based on the keyboard appearing/disappearing.
Closes https://github.com/facebook/react-native/pull/1366
Github Author: Stanislav Vishnevskiy <vishnevskiy@gmail.com>
Test Plan: Imported from GitHub, without a `Test Plan:` line.
Summary:
Fix issue #1136
Closes https://github.com/facebook/react-native/pull/1721
Github Author: =?UTF-8?q?=E9=9A=90=E9=A3=8E?= <yinfeng.fcx@alibaba-inc.com>
Test Plan: Imported from GitHub, without a `Test Plan:` line.
Summary:
@public
The info about bridge modules (such as id, name, queue, methods...) was spread
across arrays & dictionaries on the bridge, move it into a specific class.
It also removes a lot of information that was statically cached, and now have
the same lifecycle of the bridge.
Also moved RCTModuleMethod, RCTFrameUpdate and RCTBatchedBridge into it's own
files, for organization sake.
NOTE: This diff seems huge, but most of it was just moving code :)
Test Plan:
Tested UIExplorer & UIExplorer tests, Catalyst, MAdMan and Groups. Everything
looks fine.
Summary:
@public
I've added an alert to notify when the profile has been generated, but it was
being created out of the main thread.
Test Plan:
Launch the UIExplorer, start and stop profiling, an alert should show up, and
everything should just keep working as expected.
Summary:
@public
When the profile is initialized, it automatically hooks into every method of
the bridge modules, that was causing `+initialize` to be called twice.
Also add a popup to notify the user that the profile has been created.
Test Plan:
Run the UIExplorer, start the profiler, try to rage shake to open the dev menu
again. It should now work, and show an alertview with some information once the
profile is stopped.
Summary:
Live reload is disabled when an error has occurred. This requires the developer to fix the error and then switch to the simulator to reload the device manually; impacting developer flow and increasing alt tabbing. This pull request fixes that by allowing live reload to work even on errors.
This fixes issue: #1343.
Closes https://github.com/facebook/react-native/pull/1549
Github Author: Ruben Niculcea <ruben.niculcea@gmail.com>
Test Plan: Imported from GitHub, without a `Test Plan:` line.
Summary:
@public
That was eventually being released before all the queues had been cleared.
Update it so the each modules' queue is immediately invalidated after sending
the `-invalidate` message to it, and introduce an intentional retain cycle so
the bridge is only released together with all modules, when all the messages
have been dispatched.
Test Plan: Launch the UIExplorer, and reload it, like, a lot.
Summary:
@public
Add PerformanceLogger to keep track of JS download, initial script execution and
full TTI.
Test Plan:
The Native side currently calls `addTimespans` when it's finish initializing
with the six values (start and end for the three events), so I just checked it
with a `PerformanceLogger.logTimespans()` at the end of the function.
```
2015-06-18 16:47:19.096 [info][tid:com.facebook.React.JavaScript] "ScriptDownload: 48ms"
2015-06-18 16:47:19.096 [info][tid:com.facebook.React.JavaScript] "ScriptExecution: 106ms"
2015-06-18 16:47:19.096 [info][tid:com.facebook.React.JavaScript] "TTI: 293ms"
```
Summary:
@public
I was using UIKeyCommand as a key in a dictionary, but it seems iOS wasn't treating identical commands as equal, so it was possible to register the same key command twice, resulting in the command triggering the action multiple times.
I've now created a container object for the key commands, and not relying on undocumented hashing behavior of UIKeyCommand for deduplication any more.
Test Plan: Reload bridge multiple times, then check that the number of registered keys in the command set inside RCTKeyCommands doesn't keep increasing.
Summary:
@public
There was an iVar being directly referenced from inside a block on RCTDevMenu
that was causing a retain cycle and the dev menu wasn't being released.
Test Plan: Put a break point on dealloc, it should be called now.
Summary:
@public
Add marker to show JavaScript download duration + flow arrows to show the origin
of the UI blocks being flushed.
Also fixed the condition on `RCTPerfStats`, UI and JS graphs were being created
at startup time, now they're just created on the first time they're shown.
Test Plan:
The markers:
{F22577660}
To check the FPS graph, enable it on the DevMenu, and it should appear initially
empty, instead of previously filled as before.
Summary:
@public
The current implementation of `MessageQueue` is huge, over-complicated and spread
across `MethodQueue`, `MethodQueueMixin`, `BatchedBridge` and `BatchedBridgeFactory`
Refactored in a simpler way, were it's just a `MessageQueue` class and `BatchedBridge`
is only an instance of it.
Test Plan:
I had to make some updates to the tests, but no real update to the native side.
There's also tests covering the `remoteAsync` methods, and more integration tests for UIExplorer.
Verified whats being used by Android, and it should be safe, also tests Android tests have been pretty reliable.
Manually testing: Create a big hierarchy, like `<ListView>` example. Use the `TimerMixin` example to generate multiple calls.
Test the failure callback on the `Geolocation` example.
All the calls go through this entry point, so it's hard to miss if it's broken.
Summary:
@public
Add missing `RCT_EXTERN` to the constants in `RCTProfile`'s header
Test Plan:
Move the the import on `RCTBridge` to the header, build no longer fails due to
duplicate symbols.
Summary:
@public
This removes the last piece of data that was still stored on the DATA section,
`RCT_IMPORT_METHOD`. JS calls now dynamically populate a lookup table simultaneously
on JS and Native, instead of creating a mapping at load time.
Test Plan: Everything still runs, tests are green.
Summary:
@public
I've increased the warning levels in the OSS frameworks, which caught a bunch of minor issues. I also fixed some new errors in Xcode 7 relating to designated initializers and TLS security.
Test Plan:
* Test the sample apps and make sure they still work.
* Run tests.
Summary:
@public
Include `js_name` and `__LINE__` on exported methods' generated names + use the
method implementation instead of `objc_msgSend` on the bridge, so it still works
in case of clashing.
Test Plan: Everything still working, otherwise it'd crash at startup.
Summary:
@public
Include stack traces in native redboxes (e.g. from RCTLogError). It's not trivial to get the file names and line numbers for every frame of the stack, but we can get the first one which is nice.
Test Plan: {F22548418}
Summary:
@public
This probably needs more thought - might want to differentiate between console.error and reportError.
Test Plan: console.error and reportError no longer redbox. invariant and RCTLogError still do.
Summary:
@public
The information we required about the exported methods were previously stored
on the binary's DATA section, which didn't allow to access methods on different
static libraries, or in any dynamic library at all. Instead of fetching information
from all the DATA segments, this diff changes the macro in order to create a
new method, that returns the required information about the original method. The
module itself is registered at load time, and on the bridge initialization all
the auto-generated methods are called to gather the methods' information.
Test Plan:
UIExplorer previously had a dependency on `RCTTest`, because it had a `TestModule`
that had to be on the same library. `RCTTest` is now a dependency of
`UIExplorerIntegrationTests`. So the tests themselves running should test it.
Summary:
@public
This is the first of a few diffs that change the way the executors are handled
by the bridge.
For they are just promoted to modules, so they are automatically loaded by the bridge.
Test Plan:
Tested on UIExplorer, Catalyst and MAdMan.
Tested all the 3 executors, everything looks fine.
Summary:
@public
There have been multiple instances of confusion about whether a redbox means the
developer did something they shouldn't but things will keep working, or if
something went horribly wrong and the app will crash in prod. This diff
introduces an orange background color to the redbox for `console.error` and
`RCTLogError` to indicate that something bad happened, but that the app will
continue working.
Test Plan:
see orange error for geo permissions:
{F22541375}
Summary:
@public
`[Bridge] Add support for JS async functions to RCT_EXPORT_METHOD` was imported but broke some internal code, reverting the `MessageQueue` that caused the issues and add a test, since the method is not used yet.
Test Plan: Run the test o/
Summary:
Adds support for JS async methods and helps guide people writing native modules w.r.t. the callbacks. With this diff, on the native side you write:
```objc
RCT_EXPORT_METHOD(getValueAsync:(NSString *)key
resolver:(RCTPromiseResolver)resolve
rejecter:(RCTPromiseRejecter)reject)
{
NSError *error = nil;
id value = [_nativeDataStore valueForKey:key error:&error];
// "resolve" and "reject" are automatically defined blocks that take
// any object (nil is OK) and an NSError, respectively
if (!error) {
resolve(value);
} else {
reject(error);
}
}
```
On the JS side, you can write:
```js
var {DemoDataStore} = require('react-native').NativeModules;
DemoDataStore.getValueAsync('sample-key').then((value) => {
console.log('Got:', value);
}, (error) => {
console.error(error);
// "error" is an Error object whose message is the NSError's description.
// The NSError's code and domain are also set, and the native trace i
Closes https://github.com/facebook/react-native/pull/1232
Github Author: James Ide <ide@jameside.com>
Test Plan: Imported from GitHub, without a `Test Plan:` line.
Summary:
@public
This is a refactor of @philikon's original diff that decouples the dependencies between the Network and Image modules, and replaces RCTDataQueryExecutor with a more useful abstraction.
I've introduced the RCTURLRequestHandler protocol, which is a new type of bridge module used for loading data using an NSURLRequest. RCTURLRequestHandlers can be registered using RCT_EXPORT_MODULE() and are then available at runtime for use by the RCTDataManager, which will automatically select the appropriate handler for a given request based on the handler's self-reported capabilities.
The currently implemented handlers are:
- RCTHTTPRequestHandler - the standard open source HTTP request handler that uses NSURLSession
- RKHTTPRequestHandler - the internal FB HTTP request handler that uses FBNetworking
- RCTImageRequestHandler - a handler for loading local images from the iOS asset-library
Depends on D2108193
Test Plan:
- Internal apps still work
- OSS port still compiles, Movies app and a sample Parse app still work
- uploading image to Parse using the above code snippet works
- tested `FormData` with string and image parameters using http://www.posttestserver.com/
Summary:
@public
For every call that comes from JS to Native we'd call dispatch_async so the
method would be cllead on the queue/thread it's expecting. This diff
buckets the calls by target queue, dispatches only once to that queue, and then
call all the methods for it inside the same dispatch.
Test Plan: {F22510090}
Summary:
@public
`RCTDispatchEvent` and `RCTTiming` weren't being paused when there wasn't any
work left to be done.
Test Plan:
Run the timers example - check everything still works as expected
Test the ListView paging example - check scroll events are still fired as expected
Launch UIExplorer, let it idle, and put a break point on `-[RCTBridge dispatchBlock:moduleID:]`,
it should never fire.
Summary:
@public
Bridge modules were being invalidate on the main thread, what could lead to
racing conditions, move the calls to invalidate on happen to the module's
methodQueue
Test Plan: Run the tests
Summary:
@public
Add `RCT_DEV`-only profiling hooks to every method in every bridge modules to
add a little bit more detail to the timeline profile.
Test Plan: {F22522834}
Summary:
This bug was causing a redbox when touching rapidly because multiple touches had the same identifier. This code was meant to ensure that a unique ID is found, but it was checking against the wrong property in the react touch array.
I don't think this was really affecting prod, because the invariant is guarded by a __DEV__ check
@public
Test Plan:
- Start several touches at once (or just rapidly jam fingers on your device), and you won't see a redbox
- Also verify that single touches, touch moves, and multi touches work as before
Summary:
The idea behind this change it to couple together menu item title
and handler. The code becomes simpler and easier to maintain, but
also makes it possible to extend dev menu in the future.
@public
Test Plan:
All menu items works as before.
Changed websocket executor class name and made sure that when the class
is missing we get nice error message.
Summary:
These two arrays aren't used. The code is easier to read without them
@public
Test Plan: Tap around UIExplorer and verify multi-touch and responder system behavior works the same
Summary:
@public
Right now the profiler shows how long the executor took on JS but doesn't show
how long each of the batched calls took, this adds a *very* high level view of JS
execution (still doesn't show properly calls dispatched with setImmediate)
Also added a global property on JS to avoid trips to Native when profiling is
disabled.
Test Plan:
Run the Profiler on any app
{F22491690}
Tadeu Zagallo
Nick Lockwood
Alex Kotliarskyi
Alex Akers
Spencer Ahrens
Philipp von Weitershausen
Eric Vicenti
DengYun
chirag04
Kevin Gozali
Vladislav Alexeev
Kostiantyn Koval
LYK
Matthew Arbesfeld
Natansh Verma
KJlmfe
James Ide
Matt Revell
Stanislav Vishnevskiy
=?UTF-8?q?=E9=9A=90=E9=A3=8E?=
Christopher Dro
Ruben Niculcea
David Callahan
Jared Forsyth
Chace Liang