Summary:
Fix a bug that happens when views are added and removed in the same manageChildren block with a delete animation. What happens is that the inserted view is not inserted at the proper index if the deleted view index is smaller than the inserted one. This is because the view is not immediately removed from the subviews array so we need to offset the insert index for each view that is going to be deleted with an animation and is before the inserted view.
To do this I separated `_removeChildren` into 2 different functions, one for animated delete and one for normal delete. The animated one returns an array of `RCTComponent` that are going to be animated. We can then use this array to offset the insert index.
**Test plan (required)**
Tested that this fixed the bug in an app where I noticed it, also tested the UIExplorer example to make sure LayoutAnimations still worked properly.
Closes https://github.com/facebook/react-native/pull/7942
Differential Revision: D3417194
Pulled By: bestander
fbshipit-source-id: 9145a783e520c6718dd023a1e006646acb09cb7c
Summary:
Fix a bug that happens when views are added and removed in the same manageChildren block with a delete animation. What happens is that the inserted view is not inserted at the proper index if the deleted view index is smaller than the inserted one. This is because the view is not immediately removed from the subviews array so we need to offset the insert index for each view that is going to be deleted with an animation and is before the inserted view.
To do this I separated `_removeChildren` into 2 different functions, one for animated delete and one for normal delete. The animated one returns an array of `RCTComponent` that are going to be animated. We can then use this array to offset the insert index.
**Test plan (required)**
Tested that this fixed the bug in an app where I noticed it, also tested the UIExplorer example to make sure LayoutAnimations still worked properly.
Closes https://github.com/facebook/react-native/pull/7942
Differential Revision: D3417194
Pulled By: nicklockwood
fbshipit-source-id: 790f4ac15a8552323b359e6466cecfa80418c63c
Summary:
After cleaning up JS SourceMap code, these native methods are not needed anymore.
On iOS it saves another 30+ Mb during development.
Reviewed By: javache, astreet
Differential Revision: D3348975
fbshipit-source-id: a68ae9b00b4dbaa374b421029ae676fc69ae5a75
Summary:
This diff implement the CSS z-index for React Native iOS views. We've had numerous pull request for this feature, but they've all attempted to use the `layer.zPosition` property, which is problematic for two reasons:
1. zPosition only affects rendering order, not event processing order. Views with a higher zPosition will appear in front of others in the hierarchy, but won't be the first to receive touch events, and may be blocked by views that are visually behind them.
2. when using a perspective transform matrix, views with a nonzero zPosition will be rendered in a different position due to parallax, which probably isn't desirable.
See https://github.com/facebook/react-native/pull/7825 for further discussion of this problem.
So instead of using `layer.zPosition`, I've implemented this by actually adjusting the order of the subviews within their parent based on the zIndex. This can't be done on the JS side because it would affect layout, which is order-dependent, so I'm doing it inside the view itself.
It works as follows:
1. The `reactSubviews` array is set, whose order matches the order of the JS components and shadowView components, as specified by the UIManager.
2. `didUpdateReactSubviews` is called, which in turn calls `sortedSubviews` (which lazily generates a sorted array of `reactSubviews` by zIndex) and inserts the result into the view.
3. If a subview is added or removed, or the zIndex of any subview is changed, the previous `sortedSubviews` array is cleared and `didUpdateReactSubviews` is called again.
To demonstrate it working, I've modified the UIExplorer example from https://github.com/facebook/react-native/pull/7825
Reviewed By: javache
Differential Revision: D3365717
fbshipit-source-id: b34aa8bfad577bce023f8af5414f9b974aafd8aa
Summary:
This diff refactors the view update process into two stages:
1. The `reactSubviews` array is set, whose order matches the order of the JS components and shadowView components, as specified by the UIManager.
2. The `didUpdateReactSubviews` method is called, which actually inserts the reactSubviews into the view hierarchy.
This simplifies a lot of the hacks we had for special-case treatment of subviews: In many cases we don't want to actually insert `reactSubviews` into the parentView, and we had a bunch of component-specific solutions for that (typically overriding all of the reactSubviews methods to store views in an array). Now, we can simply override the `didUpdateReactSubviews` method for those views to do nothing, or do something different.
Reviewed By: wwjholmes
Differential Revision: D3396594
fbshipit-source-id: 92fc56fd31db0cfc66aac3d1634a4d4ae3903085
Summary:
As per https://twitter.com/olebegemann/status/738656134731599872, our use of "main thread" to mean "main queue" seems to be unsafe.
This diff replaces the `NSThread.isMainQueue` checks with dispatch_get_specific(), which is the recommended approach.
I've also replaced all use of "MainThread" terminology with "MainQueue", and taken the opportunity to deprecate the "sync" param of `RCTExecuteOnMainThread()`, which, while we do still use it in a few places, is incredibly unsafe and shouldn't be encouraged.
Reviewed By: javache
Differential Revision: D3384910
fbshipit-source-id: ea7c216013372267b82eb25a38db5eb4cd46a089
Summary: The view update cycle in UIManager was relying on a bunch of boolean values boxes as NSNumbers in parallel arrays. This diff packs those values into a struct, which is more efficient and easier to maintain.
Reviewed By: javache
Differential Revision: D3365346
fbshipit-source-id: d9cbf2865421f76772c1761b13992d40ec3675f0
Summary: The view update cycle in UIManager was relying on a bunch of boolean values boxes as NSNumbers in parallel arrays. This diff packs those values into a struct, which is more efficient and easier to maintain.
Reviewed By: javache
Differential Revision: D3253073
fbshipit-source-id: abbf2a910aeb536050c3a83513fb542962ce71a5
Summary: The view update cycle in UIManager was relying on a bunch of boolean values boxes as NSNumbers in parallel arrays. This diff packs those values into a struct, which is more efficient and easier to maintain.
Reviewed By: javache
Differential Revision: D3253073
fbshipit-source-id: 3e1520c27b88bc1b44ddffcaae3218d7681b2cd2
Summary: Updated networking and geolocation to use the new events system.
Reviewed By: bestander
Differential Revision: D3346129
fbshipit-source-id: 957716e54d7af8c4a6783f684098e92e92f19654
Summary: Updated networking and geolocation to use the new events system.
Reviewed By: javache
Differential Revision: D3339945
fbshipit-source-id: 01d307cf8a0aea3a404c87c6205132c42290abb1
Summary: Updated networking and geolocation to use the new events system.
Reviewed By: javache
Differential Revision: D3339945
fbshipit-source-id: f1332fb2aab8560e4783739e223c1f31d583cfcf
Summary: AppState now subclasses NativeEventEmitter instead of using global RCTDeviceEventEmitter.
Reviewed By: javache
Differential Revision: D3310488
fbshipit-source-id: f0116599223f4411307385c0dab683659d8d63b6
Summary:
Added a button to the iOS Red Box to enable copying of the error and stack trace to the clipboard to make it easier to paste the error and stack into bug reports or other text windows. Clicking the Copy button on the bottom of the RedBox screen or pressing Cmd-Option-C keyboard shortcut in the simulator will copy the full stack trace as text to the iOS pasteboard and when in the simulator you can then hit Command-C to get the text to the Mac's pasteboard for pasting in your favorite reporting/tracking app.
No tests for this change - I don't see any tests to extend for the RCTRedBoxWindow class. No impact on APIs or core React Native functionality. I validated it by running test React Native apps with red box errors and both hitting the copy button or using the command key shortcut in the emulator to get the text of the stack to the iOS pasteboard.
Closes https://github.com/facebook/react-native/pull/7557
Differential Revision: D3311743
Pulled By: javache
fbshipit-source-id: 76d1ac8ab93f40696c6a2369dae2245194db095a
Summary:
Previously, only Text and Image could be nested within Text. Now, any
view can be nested within Text. One restriction of this feature is
that developers must give inline views a width and a height via
the style prop.
Previously, inline Images were supported by using iOS's built-in support
for rendering images with an NSAttributedString via NSTextAttachment.
However, NSAttributedString doesn't support rendering arbitrary views.
This change adds support for nesting views within Text by creating one
NSTextAttachment per inline view. The NSTextAttachments act as placeholders.
They are set to be the size of the corresponding view. After the text is
laid out, we query the text system to find out where it has positioned each
NSTextAttachment. We then position the views to be at those locations.
This commit also contains a change in `RCTShadowText.m`
`_setParagraphStyleOnAttributedString:heightOfTallestSubview:`. It now only sets
`lineHeight`, `textAlign`, and `writingDirection` when they've actua
Closes https://github.com/facebook/react-native/pull/7304
Differential Revision: D3269333
Pulled By: nicklockwood
fbshipit-source-id: 2b59f1c5445a4012f9c29df9f10f5010060ea517
Summary: Having UI modules access the shadowQueue via UIManager.methodQueue is fragile and leads to race conditions in startup, sometimes resulting in an error where the methodQueue is set twice, or not at all.
Reviewed By: javache
Differential Revision: D3304890
fbshipit-source-id: 7198d28314dbec798877fcaaf17ae017d50157e9
Summary:
The `EmitterSubscription.remove()` method was previously calling `this.subscriber.removeSubscription(this)` directly, bypassing the mechanism in `NativeEventEmitter` that keeps track of the number of subscriptions.
This meant that native event modules (subclasses of `RCTEventEmitter`) would keep sending events even after all the listeners had been removed. This wasn't a huge overhead, since these modules are singletons and only send one message over the bridge per event, regardless of the number of listeners, but it's still undesirable.
This fixes the problem by routing the `EmitterSubscription.remove()` method through the `EventEmitter` so that `NativeEventEmitter` can apply the additional native calls.
I've also improved the architecture so that each `NativeEventEmitter` uses its own `EventEmitter`, but they currently all still share the same `EventSubscriptionVendor` so that legacy code which registers events via `RCTDeviceEventEmitter` still works.
Reviewed By: vjeux
Differential Revision: D3292361
fbshipit-source-id: d60e881d50351523d2112473703bea826641cdef
Summary:
Currently, `7 << 16` is used as the animation easing function for both the showing and hiding of the keyboard.
Instead, `7 << 16` should be used for showing the keyboard and `6 << 16` for hiding the keyboard.
For details, see: http://stackoverflow.com/questions/18870447/how-to-use-the-default-ios7-uianimation-curve/19439283#19439283
**Test plan (required)**
Testing animating the position of a view to coordinate with the keyboard hiding and showing and it looks good.
Adam Comella
Microsoft Corp.
Closes https://github.com/facebook/react-native/pull/7372
Differential Revision: D3300464
Pulled By: nicklockwood
fbshipit-source-id: 3fdc161f709de11deb7de511aad28767f5d80bd6
Summary:
This is a solution for the problem I raised in https://www.facebook.com/groups/react.native.community/permalink/768218933313687/
I've added a new native base class, `RCTEventEmitter` as well as an equivalent JS class/module `NativeEventEmitter` (RCTEventEmitter.js and EventEmitter.js were taken already).
Instead of arbitrary modules sending events via `bridge.eventDispatcher`, the idea is that any module that sends events should now subclass `RCTEventEmitter`, and provide an equivalent JS module that subclasses `NativeEventEmitter`.
JS code that wants to observe the events should now observe it via the specific JS module rather than via `RCTDeviceEventEmitter` directly. e.g. to observer a keyboard event, instead of writing:
const RCTDeviceEventEmitter = require('RCTDeviceEventEmitter');
RCTDeviceEventEmitter.addListener('keyboardWillShow', (event) => { ... });
You'd now write:
const Keyboard = require('Keyboard');
Keyboard.addListener('keyboardWillShow', (event) => { ... });
Within a component, you can also use the `Subscribable.Mixin` as you would previously, but instead of:
this.addListenerOn(RCTDeviceEventEmitter, 'keyboardWillShow', ...);
Write:
this.addListenerOn(Keyboard, 'keyboardWillShow', ...);
This approach allows the native `RCTKeyboardObserver` module to be created lazily the first time a listener is added, and to stop sending events when the last listener is removed. It also allows us to validate that the event strings being observed and omitted match the supported events for that module.
As a proof-of-concept, I've converted the `RCTStatusBarManager` and `RCTKeyboardObserver` modules to use the new system. I'll convert the rest in a follow up diff.
For now, the new `NativeEventEmitter` JS module wraps the `RCTDeviceEventEmitter` JS module, and just uses the native `RCTEventEmitter` module for bookkeeping. This allows for full backwards compatibility (code that is observing the event via `RCTDeviceEventEmitter` instead of the specific module will still work as expected, albeit with a warning). Once all legacy calls have been removed, this could be refactored to something more elegant internally, whilst maintaining the same public interface.
Note: currently, all device events still share a single global namespace, since they're really all registered on the same emitter instance internally. We should move away from that as soon as possible because it's not intuitive and will likely lead to strange bugs if people add generic events such as "onChange" or "onError" to their modules (which is common practice for components, where it's not a problem).
Reviewed By: javache
Differential Revision: D3269966
fbshipit-source-id: 1412daba850cd373020e1086673ba38ef9193050
Summary:
Modules which call JS methods directly, or use `sendDeviceEventWithName:`, can trigger effects in JS without ever being referenced from the JS code. This breaks some assumptions in my earlier diff about when modules can be lazily loaded.
Pending a better solution, I've put explicit `init` methods in these modules to ensure they are eagerly initialized (the downside to this is that they'll still be initialized even if they are never used).
Reviewed By: javache
Differential Revision: D3258232
fb-gh-sync-id: f925bc2e5339c1fbfcc244d4613062c5ab848fc2
fbshipit-source-id: f925bc2e5339c1fbfcc244d4613062c5ab848fc2
Summary:
Previously, if a module implemented `setBridge:` we assumed that it needs to be initialised on the main thread. This assumption was not really warranted however, and it was a barrier to deferring module initialization.
This diff tweaks the rules so that only modules that override `init` or `constantsToExport**` are assumed to require main thread initialization, and others can be created lazily when they are first used.
WARNING: this will be a breaking change to any 3rd party modules that are assuming `setBridge:` is called on the main thread. Those modules should be rewritten to move any code that requires the main thread into `init` or `constantsToExport` instead.
`**` We will also be examining whether `constantsToExport` can be done lazily, but for now any module that uses it will still be created eagerly when the bridge starts up.
Reviewed By: javache
Differential Revision: D3240682
fb-gh-sync-id: 48f309e3158bbccb52141032baf70def3e609371
fbshipit-source-id: 48f309e3158bbccb52141032baf70def3e609371
Summary:
Hi,
I noticed touching stack frames from the red box when running from an iOS device wouldn't open my editor (was working fine from the simulator).
Here's a fix.
Let me know if everything looks correct.
Thanks,
Closes https://github.com/facebook/react-native/pull/7088
Differential Revision: D3235102
Pulled By: javache
fb-gh-sync-id: 06e6c3f9164e987ea9bf71d16fe360dc37036c8d
fbshipit-source-id: 06e6c3f9164e987ea9bf71d16fe360dc37036c8d
Summary:This adds support for delete view animations in LayoutAnimation for iOS. It supports the same properties as the create animation (alpha, scale).
This allows making simple animations when removing a view which is normally hard to do in React since we need to not remove the view node immediately.
**Test plan**
Tested add/removing views in the UIExample explorer with and without setting a LayoutAnimation. Also tested that the completion callback still works properly. Tested that user interation during the animation is properly disabled.
I also plan to work on improving the doc for LayoutAnimation as well as making this PR for android too.
Closes https://github.com/facebook/react-native/pull/6779
Differential Revision: D3215525
Pulled By: sahrens
fb-gh-sync-id: 526120acd371c8d1af433e8f199cfed336183775
fbshipit-source-id: 526120acd371c8d1af433e8f199cfed336183775
Summary:Hey,
I have been going through some UIAlert related issues in the repo trying to fix them, and one of the steps to start reproducing them was to put `Alert.alert()` call right inside `componentDidMount`.
However, I've started noticing strange bugs as long as I didn't set 1second timeout.
Started digging in deeper, and I've noticed the `UIAlert` gets attached to the `RCTWindow()` mainViewController.
However - since RCTDevLoadingView adds a `keyWindow`, that is the window that will be returned at the time of the call and the window `UIAlert` will be attached to.
To visualise that better - you can take a look at these two frames when app is being loaded:
<img width="371" alt="screen shot 2016-04-20 at 22 02 45" src="https://cloud.githubusercontent.com/assets/2464966/14688596/ae8d292c-0743-11e6-8aeb-e45da391b5b5.png">
<img width="371" alt="screen shot 2016-04-20 at 22 02 58" src="https://cloud.githubusercontent.com/assets/2464966/14688599/b30798e8-0743-11e6-951a-463fe7324c56.png">
AFAIK we do
Closes https://github.com/facebook/react-native/pull/7098
Differential Revision: D3207395
Pulled By: javache
fb-gh-sync-id: f8dca063573ac6f2a0ec497138b2ed0a7b27788b
fbshipit-source-id: f8dca063573ac6f2a0ec497138b2ed0a7b27788b
Summary:When JSC throws an error on startup (e.g. a SyntaxError) or when invoking a method that is not caught by RCTExceptionsManager, we previously just reported is a native error, with a (useless) native stack trace in the redbox. This changes that behaviour to report a JS stacktrace.
The same issue was previously reported here: https://github.com/facebook/react-native/pull/5677
Reviewed By: majak
Differential Revision: D3037387
fb-gh-sync-id: 06f8333e0eb50dcef0b26284754262301b8a5f08
fbshipit-source-id: 06f8333e0eb50dcef0b26284754262301b8a5f08
Summary:All UIManager operations that affect the view hierarchy are executed via the `addUIBlock:` method, which queues them up to be executed after layout has been completed on the shadow queue.
One of the most expensive view operations is view creation, but since this doesn't actually depend on layout, there's no reason to delay it until the shadow operations have finished.
This diff modifies the `createView` method to dispatch view creation directly to the main thread instead of adding it to the UIBlock queue. This seems to result a measurable improvement in TTI.
(Credit to astreet, for implementing the same idea on Android, and thanks to oli for telling me about it!)
Reviewed By: javache
Differential Revision: D3155709
fb-gh-sync-id: 3ad1da9a8fee687aa7e0e023d668192d94dba340
fbshipit-source-id: 3ad1da9a8fee687aa7e0e023d668192d94dba340
Summary:* Add ability to configure the app that should open when starting debugging
axemclion discussed this feature with tadeuzagallo and martinbigio on: https://github.com/facebook/react-native/issues/5051
Closes https://github.com/facebook/react-native/pull/5683
Reviewed By: martinbigio
Differential Revision: D2971497
Pulled By: mkonicek
fb-gh-sync-id: 91c3ce68feed989658124bb96cb61d03dd032599
fbshipit-source-id: 91c3ce68feed989658124bb96cb61d03dd032599
Summary:If you're working on an app that needs to support landscape, reloading the app causes the iPhone simulator to reset its orientation to portrait every time the `RCTDevLoadingView` shows up. This is because it sets the root VC to `RCTModalHostViewController`, which currently supports only portrait orientations on iPhone. Changing the root view to a vanilla `UIViewController` fixes the issue.
**Steps to Reproduce**
1. Create a blank RN project: `react-native init RNTest`
2. Open it up and run it.
3. Rotate to landscape `Cmd+Right Arrow`.
4. Reload by pressing `Cmd+R`.
**Expected**
The simulator stays in landscape mode.
**Actual**
The simulator goes back to portrait.
Closes https://github.com/facebook/react-native/pull/6765
Differential Revision: D3127339
Pulled By: javache
fb-gh-sync-id: e2543c90c8d116307dcefa89a417447c1f1a327f
fbshipit-source-id: e2543c90c8d116307dcefa89a417447c1f1a327f
Summary:The 200ms timeout was causing resource issues and causing a lot of overhead when you're not running the devtools, since it will basically create a new socket every 200ms.
Also clean up the way we do logging so it's completely compiled out in prod, and standardize all the names we use for threading to lowercase react.
Reviewed By: frantic
Differential Revision: D3115975
fb-gh-sync-id: e6e51c0621d8e9fc4eadb864acd678b8b5d322a1
fbshipit-source-id: e6e51c0621d8e9fc4eadb864acd678b8b5d322a1
Summary:The packager url for the persistent connection relied on a port
in the bundleURL, so we need to insert a sensible default. Otherwise,
issues occur: https://github.com/facebook/react-native/issues/6581
Reviewed By: bestander
Differential Revision: D3113034
fb-gh-sync-id: 4eac52631ad7abd343b75a4488bb591b5caf2145
fbshipit-source-id: 4eac52631ad7abd343b75a4488bb591b5caf2145
Summary:Changing app state back to 'background' for UIApplicationWillEnterForegroundNotification.
On iOS we use the 'background' app state to determine whether a notification was tapped to foreground the app vs. received while app was already active. The PR https://github.com/facebook/react-native/pull/6379 changed RCTAppState so that it returned 'active' when app was being foregrounded from a notification; this changes it back to 'background' so that we can distinguish between the two cases again
Reviewed By: hedgerwang
Differential Revision: D3078746
fb-gh-sync-id: 8b5e9118a7e14f15871bfb68e9f85d20108b1faf
shipit-source-id: 8b5e9118a7e14f15871bfb68e9f85d20108b1faf
Summary:It was hard to understand which parts of the shadowview API are designed to be called only on the root view, and which were applicable to any view.
This diff extracts rootview-specific logic out into a new RCTRootShadowView class.
Reviewed By: majak
Differential Revision: D3063905
fb-gh-sync-id: ef890cddfd7625fbd4bf5454314b441acdb03ac8
shipit-source-id: ef890cddfd7625fbd4bf5454314b441acdb03ac8
Summary:Because the source of truth for backgroundColor is the shadow view, it's possible for the default RCTView backgroundColor to get overwritten by the current shadowView backgroundColor when the view is first created. This overridden value will then be used as the default whenever the background color is reset, which may not be be appropriate for other components that use RCTView.
This diff fixes the bug by ensuring that the view props (and therefore the default color) are set *before* the background color is propagated from the shadowView.
Reviewed By: furdei
Differential Revision: D3064128
fb-gh-sync-id: ac36007c094c7201a5c4fd93399dee4d3eb9a043
shipit-source-id: ac36007c094c7201a5c4fd93399dee4d3eb9a043
Summary:The AlertViewIOS component takes in a 'defaultValue' for the text input but never actually sets it, this PR actually sets the value.
Closes https://github.com/facebook/react-native/pull/6257
Differential Revision: D3052412
Pulled By: nicklockwood
fb-gh-sync-id: 32285330f17ccf47189dbc8fcab48f3712fee59b
shipit-source-id: 32285330f17ccf47189dbc8fcab48f3712fee59b
Summary:**Motivation**
AppStateIOS never currently returns `inactive` as a possible state. I had a requirement that when inactive, certain portions of the app should be blacked out in accordance with compliance rules. This is not possible currently, due to `inactive` never being returned. This PR fixes that.
**Test plan**
All base tests are passing. Are there AppState specific tests in place at the moment that I'm missing?
**Demonstration**
Closes https://github.com/facebook/react-native/pull/6379
Differential Revision: D3035530
Pulled By: nicklockwood
fb-gh-sync-id: 93deccc8184816809926dca8a95f2bebd1434987
shipit-source-id: 93deccc8184816809926dca8a95f2bebd1434987
Summary: If we're compiling with `-Wunused-variable` and `__IPHONE_OS_VERSION_MIN_REQUIRED` >= 8.0, this would cause an build error.
Reviewed By: javache, majak
Differential Revision: D3019904
fb-gh-sync-id: d4482d7d070f8d896acd44b03ebc70bacd9f2f3f
shipit-source-id: d4482d7d070f8d896acd44b03ebc70bacd9f2f3f
Summary:This commit modifies the jsSchedulingOverhead warning to only fire if the JS clock is more than 5 seconds ahead of the native clock. This fixes the issue in #1598 for the common case when there's only a minor difference between the two clocks, while still keeping a sanity check if they're extremely off.
cc nicklockwood tadeuzagallo
Closes https://github.com/facebook/react-native/pull/5731
Differential Revision: D3014985
Pulled By: tadeuzagallo
fb-gh-sync-id: bf57e48b7d97ad02d2aefb6e5aac845824a6fdb0
shipit-source-id: bf57e48b7d97ad02d2aefb6e5aac845824a6fdb0
Summary:The UICollectionView example is actually my use-case, which is discussed in a
bit more detail [here](https://github.com/alloy/ReactNativeExperiments/issues/2).
----
This is useful when wrapping native iOS components that determine their
own suggested size and which would be too hard/unnecessary to replicate
in the shadow view. For instance a `UICollectionView` that after layout
will update its `contentSize`, which could be used to suggest a size to
the shadow view.
The reason for adding it to -[RCTShadowView setFrame:] is mainly so it
can be used via the existing -[RCTUIManager setFrame:forView:] API and
because it might not be a feature you want to expose too prominently.
An origin of `{ NAN, NAN }` is used as a sentinel to indicate that the
frame should be used as a size suggestion. The size portion of the rect
may contain a `NAN` to skip that dimension or a suggested value for the
dimension which will be used if no explicit styling has been assigned.
Examples:
* Without any expl
Closes https://github.com/facebook/react-native/pull/6114
Differential Revision: D2994796
Pulled By: nicklockwood
fb-gh-sync-id: 6dd3dd86a352ca7d31a0da38bc38a2859ed0a410
shipit-source-id: 6dd3dd86a352ca7d31a0da38bc38a2859ed0a410
Summary: The module initialization process is complex and full of race conditions. This diff adds a set of unit tests that verify that modules setup happens in the correct order, and enforces all the various conditions for main/background init.
Reviewed By: javache
Differential Revision: D2994145
fb-gh-sync-id: 92ea84508cdeeb280ff0fb9e9b2dffa8dbc37e66
shipit-source-id: 92ea84508cdeeb280ff0fb9e9b2dffa8dbc37e66
Summary: When embedding in a hybrid app, we sometimes present new modal views or windows that have a different frame from the original root view. This API allows us to get coordinates in the application's window frame, which should be valid in any fullscreen view.
Reviewed By: majak
Differential Revision: D2939827
fb-gh-sync-id: 06b93cc2cb3519a25819c6efa445c779314dd673
shipit-source-id: 06b93cc2cb3519a25819c6efa445c779314dd673
Summary:The `RCTDevMenu.hotLoadingAvailable` check always returned YES if `bridge.bundleURL` was nil. This caused the `setHotLoadingEnabled:` method to repeatedly reload the bridge, resulting in the following tests failing:
`- [RCTBridgeTests testHookRegistration];`
`- [RCTBridgeTests testCallNativeMethod];`
Also, the `RUN_RUNLOOP_WHILE()` macro did not actually assert when timing out, and the logic in `- [RCTBridgeTests tearDown];` was broken in such a way that tests would always take 5 seconds to run (and then timeout silently). This adds an assertion, and removes the broken nil check for `jsExecutor`.
Reviewed By: majak
Differential Revision: D2988885
fb-gh-sync-id: 91307585ac8acb0181f0cddeeddf6cb4b198e4fe
shipit-source-id: 91307585ac8acb0181f0cddeeddf6cb4b198e4fe
Summary:The `uiBlockToAmendWithShadowViewRegistry:` is called on every single view manager, on every single layout pass. This causes all view managers to be eagerly intiialized, even if not being used.
In practice very few modules actually use this method, so by checking if the method is implemented before calling it, we can eliminate most of this work.
(Hopefully in future we can get ride of this method altogether, but right now it's integral to the way that text layout is implemented).
Reviewed By: majak, javache
Differential Revision: D2982181
fb-gh-sync-id: 818d0aac61197df89263c919c2c80a003e293ac5
shipit-source-id: 818d0aac61197df89263c919c2c80a003e293ac5
Summary: When rotating on iPad, the dev loading view just looks clowny since it doesn't rotate properly.
Reviewed By: majak
Differential Revision: D2939721
fb-gh-sync-id: 7f1926f5cee4761cde8881e9387ae6e0063c5d6c
shipit-source-id: 7f1926f5cee4761cde8881e9387ae6e0063c5d6c
Summary:Unfortunately the 'screen' option in the `UIManager.takeSnapshot` API appears to work only on the iOS simulator, not on an actual device.
This diff removes the 'screen' option until a solution can be found that works on the device.
(Taking a snapshot of the window still works fine - it just won't include the status bar, etc.)
Reviewed By: javache
Differential Revision: D2971091
fb-gh-sync-id: 026b9d4eb2f59f686f58c18a16381ff325df612b
shipit-source-id: 026b9d4eb2f59f686f58c18a16381ff325df612b
Summary:This adds a `takeSnapshot` method to UIManager that can be used to capture screenshots as an image.
The takeSnapshot method accepts either 'screen', 'window' or a view ref as an argument.
You can also specify the size, format and quality of the captured image.
I've added an example of capturing a screenshot at UIExplorer > Snapshot / Screenshot.
I've also added an example of sharing a screenshot to the UIExplorer > ActionSheetIOS demo.
Reviewed By: javache
Differential Revision: D2958351
fb-gh-sync-id: d2eb93fea3297ec5aaa312854dd6add724a7f4f8
shipit-source-id: d2eb93fea3297ec5aaa312854dd6add724a7f4f8
Summary:
public
In 9baff8f437 (diff-8d9841e5b53fd6c9cf3a7f431827e319R331), I incorrectly assumed that iOS was wrapping promises in an extra Array. What was really happening is that all the callers were doing this. I removed the wrapping in the callers and the special case handling MessageQueue.
Now one can pass whatever object one wants to resolve and it will show properly in the resolve call on the js side. This fixes issue https://github.com/facebook/react-native/issues/5851
Reviewed By: nicklockwood
Differential Revision: D2921565
fb-gh-sync-id: 9f81e2a87f6a48e9197413b843e452db345a7ff9
shipit-source-id: 9f81e2a87f6a48e9197413b843e452db345a7ff9
Summary:
public
Introduce a header bar similar to the one shown when loading the bundle to indicate that the packager server is processing an HMR update. Hook into HMR events to show this bar when appropriate.
Reviewed By: javache
Differential Revision: D2873521
fb-gh-sync-id: a77cbb2368b75b045aa8c6ababce2f731baf514b
Summary:
We were executing all the updateBlocks for every frame that was updated in the UI flush. This would quickly give you an explosive number of block calls when loading complex views.
This update block is only really used by text to propagate padding, even though the actual insets are mostly just 0.
public
Reviewed By: nicklockwood
Differential Revision: D2848968
fb-gh-sync-id: e43c529c2bb9729e2b779bf4abefeed58775cc2e
Summary:
public
To make sourcemaps work on Hot Loading work, we'll need to be able to serve them for each module that is dynamically replaced. To do so we introduced a new parameter to the bundler, namely `entryModuleOnly` to decide whether or not to process the full dependency tree or just the module associated to the entry file. Also we need to add `//sourceMappingURL` to the HMR updates so that in case of an error the runtime retrieves the sourcemaps for the file on which an error occurred from the server.
Finally, we need to refactor a bit how we load the HMR updates into JSC. Unfortunately, if the code is eval'ed when an error is thrown, the line and column number are missing. This is a bug/missing feature in JSC. To walkaround the issue we need to eval the code on native. This adds a bit of complexity to HMR as for both platforms we'll have to have a thin module to inject code but I don't see any other alternative. when debugging this is not needed as Chrome supports sourceMappingURLs on eval'ed code
Reviewed By: javache
Differential Revision: D2841788
fb-gh-sync-id: ad9370d26894527a151cea722463e694c670227e
Summary:
public
NSJSONSerialization throws an exception when it encounters bad JSON data, including NaN values, which may not be a programming error.
This diff adds code to catch those exceptions and convert to an error. Also, if no error handling is in place, RCTJSONStringify will now display a redbox, and attempt to recover by sanitizing the JSON data and retrying.
Reviewed By: javache
Differential Revision: D2854778
fb-gh-sync-id: 18e6990af0d91083496d6a0b75c31a94ed9454a5
Summary:
public
Although the feature itself is gated, once the user is on the experiment we want to make sure hot loading starts disabled up until the feature is enabled through the dev menu.
Reviewed By: javache
Differential Revision: D2850070
fb-gh-sync-id: 66e69e152806d3bb01985afe20827e3b9cffeb41
Summary:
Ok, so this started as fixing #5273 but ended up getting a little more complicated. 😄
Currently, AlertIOS has the following API:
* `alert(title, message, buttons, type)`
* `prompt(title, defaultValue, buttons, callback)`
I've changed the API to look like the following:
* `alert(title, message, callbackOrButtons)`
* `prompt(title, message, callbackOrButtons, type, defaultValue)`
I know that breaking changes are a big deal, but I find the current alert API to be fairly inconsistent and unnecessarily confusing. I'll try to justify my changes one by one:
1. Currently `type` is an optional parameter of `alert`. However, the only reason to change the alert type from the default is in order to create one of the input dialogs (text, password or username/password). So we're in a weird state where if you want a normal text input, you use `prompt`, but if you want a password input you use `alert` with the 'secure-text' type. I've moved `type` to `prompt` so all text input is now done with `pro
Closes https://github.com/facebook/react-native/pull/5286
Reviewed By: svcscm
Differential Revision: D2850400
Pulled By: androidtrunkagent
fb-gh-sync-id: 2986cfa2266225df7e4dcd703fce1e322c12b816
Summary:
public
By doing this we fix 2 problems:
1. We use the same url, both the first time the simulator starts with Hot Loading disabled (no `hot` attribute), and after HL has been enabled and then disabled ('hot=false'). By doing so, the packager will rebuild more than one bundle as file changes. We could have ignored this attribute on the packager but I'd rather not contaminate the server with it and instead make the clients send only 2 types of URLs.
2. The code on `RCTBatchedBridge.m` that decides whether or not to enable HMR does so by looking at presence of the query string parameter `hot`. If the parameter is present, even when it's false, it will try to enable HL, which is wrong.
Reviewed By: nicklockwood
Differential Revision: D2807512
fb-gh-sync-id: 728b680c2383c328d8967d34c10e7a6288e455ac
Summary:
public
Android implement ViewManager methods via a dispatch method on UIManager, whereas iOS implements them by exposing the methods on the view manager modules directly.
This diff polyfills Android's implementation on top of the iOS implementation, allowing the same JS API to be used for both.
Reviewed By: javache
Differential Revision: D2803020
fb-gh-sync-id: 0da0544e593dc936467d16ce957a77f7ca41355b
Summary:
fixes#3106
Having -1 would trigger callback one frame early causing it to be ignored on the next frame.
Closes https://github.com/facebook/react-native/pull/3190
Reviewed By: svcscm
Differential Revision: D2783700
Pulled By: mkonicek
fb-gh-sync-id: 02070f70915055aec3b1543a8d553f2680438611
Summary:
public
Most of the time - especially during app startup - when we call UIManager.manageChildren(), we are actually just adding the first set of children to a newly created view.
This case is already optimized for in the JS code, by memoizing index arrays at various sizes, but this is not especially efficient since it is still sending an array of indices with each call that could be easily inferred on the native side instead.
I've added a hybrid native/JS optimization that improves the performance for this case. It's not a huge win in terms of time saved, but benchmarks show improvements in the ~1% range for several of the app startup metrics.
Reviewed By: tadeuzagallo
Differential Revision: D2757388
fb-gh-sync-id: 74f0cdbba93af2c04d69b192a8c2cc5cf429fa09
Summary:
public
Thanks to the new lazy initialization system for modules, `RCTDidCreateNativeModules` no longer does what the name implies.
Previously, `RCTDidCreateNativeModules` was fired after all native modules had been initialized. Now, it simply fires each time the bridge is reloaded. Modules are created on demand when they are needed, so most of the assumptions about when `RCTDidCreateNativeModules` will fire are now incorrect.
This diff deprecates `RCTDidCreateNativeModules`, and adds a new notification, `RCTDidInitializeModuleNotification`, which fires each time a module a new module is instantiated.
If you need to access a module at any time you can just call `-[bridge moduleForClass:]` and the module will be instantiated on demand. If you want to access a module *only* after it has already been instantiated, you can use the `RCTDidInitializeModuleNotification` notification.
Reviewed By: tadeuzagallo
Differential Revision: D2755036
fb-gh-sync-id: 25bab6d5eb6fcd35d43125ac45908035eea01487
Summary:
public
A lot of the core modules have to use private methods in the bridge, specially
since the `RCTBatchedBridge` interface is never exposed. That was leading to a
lot of different private bridge categories spread across different modules,
which makes harder to identify which modules are affected by private API changes.
Replace all the categories with a single private header.
Reviewed By: nicklockwood
Differential Revision: D2757564
fb-gh-sync-id: 793158b9082d542b74a6094ed0db4d5dc3a88f78
Summary:
A component can be backed by native "node" that can change its internal state, which would result in a new UI after the next layout. Since js has no way of knowing that this has happened it wouldn't trigger a layout if nothing in js world has changed. Therefore we need a way how to trigger layout from native code.
This diff does it by adding methods `layoutIfNeeded` on the uimanager and `isBatchActive` on the bridge.
When `layoutIfNeeded` is called it checks whether a batch is in progress. If it is we do nothing, since at it's end layout happens. If a batch is not in progress we immidiately do layout.
I went with the easiest way how to implement this - `isBatchActive` is a public method on the bridge. It's not ideal, but consistent with other methods for modules.
public
Reviewed By: jspahrsummers, nicklockwood
Differential Revision: D2748896
fb-gh-sync-id: f3664c4af980d40a463b538e069b26c9ebad6300
Summary:
public
This diff replaces the RegEx module method parser with a handwritten recursive descent parser that's faster and easier to maintain.
The new parser is ~8 times faster when tested on the UIManager.managerChildren() method, and uses ~1/10 as much RAM.
The new parser also supports lightweight generics, and is more tolerant of white space.
(This means that you now can – and should – use types like `NSArray<NSString *> *` for your exported properties and method arguments, instead of `NSStringArray`).
Reviewed By: jspahrsummers
Differential Revision: D2736636
fb-gh-sync-id: f6a11431935fa8acc8ac36f3471032ec9a1c8490
Alex Kotliarskyi
Konstantin Raev
Janic Duplessis
Nick Lockwood
Nathan Azaria
Martin Konicek
Blair Vanderhoof
Pieter De Baets
Mike Grabowski
Chris Evans
Adam Comella
Marc Horowitz
Digeff
Jean Regisser
Martin Kralik
Ian Yu-Hsun Lin
Tisho Georgiev
Walter Luh
Emily Janzer
Alexey Lang
Morgan Pretty
Ken Wheeler
Mark Wang
Martín Bigio
Kyle Corbitt
Eloy Durán
Dave Miller
Satyajit Sahoo
tantan
Jed Lau
John Ku
Tadeu Zagallo
Dan Witte
