This enables two overrides: the bedrock fork block & the optimism config
being set. The optimism override uses the default EIP 1559 parameters.
These make it easy to setup a node in optimism mode & have a configurable
bedrock block.
All of the rules accessors are also helpful for checking which mode the
node is running in.
This commit squashes the op-geth fork history into a more maintainable
diff for rebasing upon upstream geth.
reference-optimistic-geth changes (origins of op-geth in early Bedrock
development stage):
- Deposit TX Type
- Enable deposit tx in EVM/tx pool
- Change deposit nonce to not be the max nonce
- Extend PayloadAttributesV1 with a Transactions field
- Force deposits at the start of each L2 block
- Fix height check
- noTxPool flag, reproduce block in verifier mode without tx pool interference
- Fix RPC json marshalling (ref op-geth PR 4)
- Deposit txs block height check in block body validation (ref op-geth PR 5)
- core: do not try to reinject deposit txs into tx-pool (ref-op-geth PR 6)
- deposit source hash field instead of L2 block height and tx index combination
- Include invalid deposits, rewind state, but always persist mint (#10)
- Provide gas to Call/Create in deposit transactions (#12)
- Add docker builds (ref-op-geth PR 16, 17)
- Don't panic on deposit transaction signature values or chain ID (ref-op-geth PR 18)
- core: Add version to DepositTx (ref-op-geth PR 19)
- Enable Geth build/lint/test in CircleCI (ref-op-geth PR 23)
- core: Include guaranteed gas in the gas pool (ref-op-geth PR 21)
- core: handle base fee, l1 availability fee, tx fee (ref-op-geth PR 27)
- fix: deposit tx hash
- fix l1 fee cache, rpc, tracing and tx pool
- core: remove deposit-tx sub-type (a.k.a. deposit version byte)
- eth/catalyst: allow engine user to reorg own chain
- miner: restore ability to reorg deep as block builder
- params: print Optimism consensus type in banner
- core/types: remove unused protected() method, see upstream PR 23376
- core: do not mutate original balance value in tx pool l1 cost adjustment
- core: subtract deposit gas from pool, so other txs do not use the same gas. And fail tx processing if deposits reach gas limit
- core/types: deposits do not tip, avoid basefee subtraction
- Unmeter the L1 Attributes Transaction
- miner: handle force tx errors as critical, clean up diff
- ci: Switch branch
- eth,miner: return STATUS_INVALID when failing to process forced transactions in request (ref-op-geth PR 40)
- verifier: forward tx to sequencer based on flag
- txpool: add flag to disable tx gossip (ref-op-geth PR 42)
- Add op-geth version in addition to geth version (ref-op-geth PR 43)
- ci: CircleCI improvements (ref-op-geth PR 44)
- Rename to op-geth
- Build latest tag on optimism branch
op-geth changes:
- Expose cache config in simulated backend (#2)
- Add EIP-1559 parameters
- eth/catalyst: update payload id computation (#1)
- make eip1559 configurable (#4)
- post-merge network should not log warnings about missing transition information (#5)
- Make the simulator more configurable (#6)
- fix OPB-6 - IsDepositTx check instead of artificial nonce value check (#7)
- Simulated backend - enable proof of stake consensus type and fix performance issue (#8)
- accounts: simulated backend consensus engine option and immediate tx indexing
- consensus/beacon: recognize all blocks as reached TTD with 0 TTD in chain config
- Add --rollup.historicalhttp CLI flag and fix backend iface
- Flags and interfaces for historical RPC requests (#12)
- Redirect historical RPC requests (#13)
- Use the pre-existing ethereum.NotFound error (#18)
- Add historical endpoint to TraceBlockByNumber and TraceBlockByHash (#19)
- Add historical endpoint to TraceTransaction (#20)
- Add historical endpoint to TraceCall (#21)
- optimism: fee params from info txi, update l1 cost func GPO params read (#15)
- add hardcoded addresses for fee payouts (#23)
- dynamic gas limit via engine API (#22)
Co-authored-by: Matthew Slipper <me@matthewslipper.com>
Co-authored-by: Joshua Gutow <jgutow@oplabs.co>
Co-authored-by: protolambda <proto@protolambda.com>
Co-authored-by: Mark Tyneway <mark.tyneway@gmail.com>
Co-authored-by: Maurelian <maurelian@protonmail.ch>
This PR changes the API so that uint64 is used for fork timestamps.
It's a good choice because types.Header also uses uint64 for time.
Co-authored-by: Felix Lange <fjl@twurst.com>
--syncTarget is a feature for development purpose in post-merge world. Previously
it's added into eth.Config. But it turns out that's a stupid idea.
- syncTarget is a block object, which is hard to be put in config file(large)
- syncTarget is just a dev feature, doesn't make too much sense to add it in config file
So I remove it from the eth config object. And it also fixes the #26328
This PR adds a parameter to startup, --synctarget. The synctarget flag is a developer-flag, that can be useful in some scenarios as a replacement for a CL node. It defines a fixed block sync target:
geth --syncmode=full --synctarget=./block_15816882.hex_rlp
The --synctarget is only made available during syncmode=full
This adds a cache for block logs which is shared by all filters. The cache
size of is configurable using the `--cache.blocklogs` flag.
Co-authored-by: Felix Lange <fjl@twurst.com>
This adds a tools.go file to import all command packages used for
go:generate. Doing so makes it possible to execute go-based code
generators using 'go run', locking in the tool version using go.mod.
Co-authored-by: Felix Lange <fjl@twurst.com>
* cmd, eth: Rename whitelist argument to peer.requiredblocks
* eth/ethconfig: document PeerRequiredBlocks better
* cmd/utils: rename new flag to --eth.requiredblocks
Co-authored-by: Felix Lange <fjl@twurst.com>
* all: work for eth1/2 transtition
* consensus/beacon, eth: change beacon difficulty to 0
* eth: updates
* all: add terminalBlockDifficulty config, fix rebasing issues
* eth: implemented merge interop spec
* internal/ethapi: update to v1.0.0.alpha.2
This commit updates the code to the new spec, moving payloadId into
it's own object. It also fixes an issue with finalizing an empty blockhash.
It also properly sets the basefee
* all: sync polishes, other fixes + refactors
* core, eth: correct semantics for LeavePoW, EnterPoS
* core: fixed rebasing artifacts
* core: light: performance improvements
* core: use keyed field (f)
* core: eth: fix compilation issues + tests
* eth/catalyst: dbetter error codes
* all: move Merger to consensus/, remove reliance on it in bc
* all: renamed EnterPoS and LeavePoW to ReachTDD and FinalizePoS
* core: make mergelogs a function
* core: use InsertChain instead of InsertBlock
* les: drop merger from lightchain object
* consensus: add merger
* core: recoverAncestors in catalyst mode
* core: fix nitpick
* all: removed merger from beacon, use TTD, nitpicks
* consensus: eth: add docstring, removed unnecessary code duplication
* consensus/beacon: better comment
* all: easy to fix nitpicks by karalabe
* consensus/beacon: verify known headers to be sure
* core: comments
* core: eth: don't drop peers who advertise blocks, nitpicks
* core: never add beacon blocks to the future queue
* core: fixed nitpicks
* consensus/beacon: simplify IsTTDReached check
* consensus/beacon: correct IsTTDReached check
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* eth,rpc: allow for flag configured timeouts for eth_call
* lint: account for package-local import order
* cr: rename `rpc.calltimeout` to `rpc.evmtimeout`
The PR implements the --miner.notify.full flag that enables full pending block
notifications. When this flag is used, the block notifications sent to mining
endpoints contain the complete block header JSON instead of a work package
array.
Co-authored-by: AlexSSD7 <alexandersadovskyi7@protonmail.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
This PR adds a more CLI flag, so that the les-server can serve light clients even the local node is not synced yet.
This functionality is needed in some testing environments(e.g. hive). After launching the les server, no more blocks will be imported so the node is always marked as "non-synced".
This moves the eth config definition into a separate package, eth/ethconfig.
Packages eth and les can now import this common package instead of
importing eth from les, reducing dependencies.
Co-authored-by: Felix Lange <fjl@twurst.com>
