This enables two overrides: the bedrock fork block & the optimism config
being set. The optimism override uses the default EIP 1559 parameters.
These make it easy to setup a node in optimism mode & have a configurable
bedrock block.
All of the rules accessors are also helpful for checking which mode the
node is running in.
This commit squashes the op-geth fork history into a more maintainable
diff for rebasing upon upstream geth.
reference-optimistic-geth changes (origins of op-geth in early Bedrock
development stage):
- Deposit TX Type
- Enable deposit tx in EVM/tx pool
- Change deposit nonce to not be the max nonce
- Extend PayloadAttributesV1 with a Transactions field
- Force deposits at the start of each L2 block
- Fix height check
- noTxPool flag, reproduce block in verifier mode without tx pool interference
- Fix RPC json marshalling (ref op-geth PR 4)
- Deposit txs block height check in block body validation (ref op-geth PR 5)
- core: do not try to reinject deposit txs into tx-pool (ref-op-geth PR 6)
- deposit source hash field instead of L2 block height and tx index combination
- Include invalid deposits, rewind state, but always persist mint (#10)
- Provide gas to Call/Create in deposit transactions (#12)
- Add docker builds (ref-op-geth PR 16, 17)
- Don't panic on deposit transaction signature values or chain ID (ref-op-geth PR 18)
- core: Add version to DepositTx (ref-op-geth PR 19)
- Enable Geth build/lint/test in CircleCI (ref-op-geth PR 23)
- core: Include guaranteed gas in the gas pool (ref-op-geth PR 21)
- core: handle base fee, l1 availability fee, tx fee (ref-op-geth PR 27)
- fix: deposit tx hash
- fix l1 fee cache, rpc, tracing and tx pool
- core: remove deposit-tx sub-type (a.k.a. deposit version byte)
- eth/catalyst: allow engine user to reorg own chain
- miner: restore ability to reorg deep as block builder
- params: print Optimism consensus type in banner
- core/types: remove unused protected() method, see upstream PR 23376
- core: do not mutate original balance value in tx pool l1 cost adjustment
- core: subtract deposit gas from pool, so other txs do not use the same gas. And fail tx processing if deposits reach gas limit
- core/types: deposits do not tip, avoid basefee subtraction
- Unmeter the L1 Attributes Transaction
- miner: handle force tx errors as critical, clean up diff
- ci: Switch branch
- eth,miner: return STATUS_INVALID when failing to process forced transactions in request (ref-op-geth PR 40)
- verifier: forward tx to sequencer based on flag
- txpool: add flag to disable tx gossip (ref-op-geth PR 42)
- Add op-geth version in addition to geth version (ref-op-geth PR 43)
- ci: CircleCI improvements (ref-op-geth PR 44)
- Rename to op-geth
- Build latest tag on optimism branch
op-geth changes:
- Expose cache config in simulated backend (#2)
- Add EIP-1559 parameters
- eth/catalyst: update payload id computation (#1)
- make eip1559 configurable (#4)
- post-merge network should not log warnings about missing transition information (#5)
- Make the simulator more configurable (#6)
- fix OPB-6 - IsDepositTx check instead of artificial nonce value check (#7)
- Simulated backend - enable proof of stake consensus type and fix performance issue (#8)
- accounts: simulated backend consensus engine option and immediate tx indexing
- consensus/beacon: recognize all blocks as reached TTD with 0 TTD in chain config
- Add --rollup.historicalhttp CLI flag and fix backend iface
- Flags and interfaces for historical RPC requests (#12)
- Redirect historical RPC requests (#13)
- Use the pre-existing ethereum.NotFound error (#18)
- Add historical endpoint to TraceBlockByNumber and TraceBlockByHash (#19)
- Add historical endpoint to TraceTransaction (#20)
- Add historical endpoint to TraceCall (#21)
- optimism: fee params from info txi, update l1 cost func GPO params read (#15)
- add hardcoded addresses for fee payouts (#23)
- dynamic gas limit via engine API (#22)
Co-authored-by: Matthew Slipper <me@matthewslipper.com>
Co-authored-by: Joshua Gutow <jgutow@oplabs.co>
Co-authored-by: protolambda <proto@protolambda.com>
Co-authored-by: Mark Tyneway <mark.tyneway@gmail.com>
Co-authored-by: Maurelian <maurelian@protonmail.ch>
* eth: cmd: deprecate personal namespace
* eth: cmd: move deprecation to node
* node: disable toml of enablepersonal
* node: disable personal on ipc as well
* Update node/node.go
Co-authored-by: Martin Holst Swende <martin@swende.se>
* console: error -> warn
* node: less roulette
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
This PR changes the API so that uint64 is used for fork timestamps.
It's a good choice because types.Header also uses uint64 for time.
Co-authored-by: Felix Lange <fjl@twurst.com>
This fixes a regression where the flag did not accept values without
the 0x prefix anymore. What's worse, if an invalid value was passed,
the client would just log an INFO level message and continue.
This change introduces a breaking change to miner.etherbase is configured.
Previously, users did not need to explicitly set the etherbase address via flag, since 'first' local account was used as etherbase automatically. This change removes the "default first account" feature.
In Proof-of-stake world, the fee recipient address is provided by CL, and not configured in Geth any more - meaning that miner.etherbase is mostly for legacy networks(pow, clique networks etc).
--syncTarget is a feature for development purpose in post-merge world. Previously
it's added into eth.Config. But it turns out that's a stupid idea.
- syncTarget is a block object, which is hard to be put in config file(large)
- syncTarget is just a dev feature, doesn't make too much sense to add it in config file
So I remove it from the eth config object. And it also fixes the #26328
This PR drops the legacy receipt types, the freezer-migrate command and the startup check. The previous attempt #22852 at this failed because there were users who still had legacy receipts in their db, so it had to be reverted #23247. Since then we added a command to migrate legacy dbs #24028.
As of the last hardforks all users either must have done the migration, or used the --ignore-legacy-receipts flag which will stop working now.
This PR adds a parameter to startup, --synctarget. The synctarget flag is a developer-flag, that can be useful in some scenarios as a replacement for a CL node. It defines a fixed block sync target:
geth --syncmode=full --synctarget=./block_15816882.hex_rlp
The --synctarget is only made available during syncmode=full
This PR fixes a regression causing snapshots not to be generated in "geth --import" mode. It also fixes the geth export command to be truly readonly, and adds a new test for geth export.
This update resolves an issue where StringSliceFlag would not be
rendered correctly in help output + mention that -H can be used multiple times
Co-authored-by: Martin Holst Swende <martin@swende.se>
This PR makes it possible to set custom headers, in particular for two scenarios:
- geth attach
- geth commands which can use --remotedb, e..g geth db inspect
The ability to use custom headers is typically useful for connecting to cloud-apis, e.g. providing an infura- or alchemy key, or for that matter access-keys for environments behind cloudflare.
Co-authored-by: Felix Lange <fjl@twurst.com>
`geth dumpgenesis` currently does not respect the content of the data directory. Instead, it outputs the genesis block created by command-line flags. This PR fixes it to read the genesis from the database, if the database already exists.
Co-authored-by: Martin Holst Swende <martin@swende.se>
This PR cleans up the configurations for pruner and snapshotter by passing a config struct.
And also, this PR disables the snapshot background generation if the chain is opened in "read-only" mode. The read-only mode is necessary in some cases. For example, we have a list of commands to open the etheruem node in "read-only" mode, like export-chain. In these cases, the snapshot background generation is non expected and should be banned explicitly.
This adds a cache for block logs which is shared by all filters. The cache
size of is configurable using the `--cache.blocklogs` flag.
Co-authored-by: Felix Lange <fjl@twurst.com>
This change updates our urfave/cli dependency to the v2 branch of the library.
There are some Go API changes in cli v2:
- Flag values can now be accessed using the methods ctx.Bool,
ctx.Int, ctx.String, ... regardless of whether the flag is 'local' or
'global'.
- v2 has built-in support for flag categories. Our home-grown category
system is removed and the categories of flags are assigned as part of
the flag definition.
For users, there is only one observable difference with cli v2: flags must now
strictly appear before regular arguments. For example, the following command is
now invalid:
geth account import mykey.json --password file.txt
Instead, the command must be invoked as follows:
geth account import --password file.txt mykey.json
In #24028 we flagged a warning when finding legacy receipts in the freezer. This PR nudges users a bit more strongly by preventing geth from starting in this case until receipts have been migrated.
It also adds a flag --ignore-legacy-receipts which when present allows geth to start normally.
* ethdb/remotedb, cmd: add support for remote (readonly) databases
* ethdb/remotedb: minor changes
* ethdb/remotedb: close the conn
* cmd, ethdb: add rpc accessor for ancient data
* internal/ethapi: license
* ethdb/remotedb: linter fixes
This PR groups all built-in network flags together and list them in the command as a whole.
And all database path flags(datadir, ancient) are also grouped, since usually these two are
used together.
