This commit squashes the op-geth fork history into a more maintainable
diff for rebasing upon upstream geth.
reference-optimistic-geth changes (origins of op-geth in early Bedrock
development stage):
- Deposit TX Type
- Enable deposit tx in EVM/tx pool
- Change deposit nonce to not be the max nonce
- Extend PayloadAttributesV1 with a Transactions field
- Force deposits at the start of each L2 block
- Fix height check
- noTxPool flag, reproduce block in verifier mode without tx pool interference
- Fix RPC json marshalling (ref op-geth PR 4)
- Deposit txs block height check in block body validation (ref op-geth PR 5)
- core: do not try to reinject deposit txs into tx-pool (ref-op-geth PR 6)
- deposit source hash field instead of L2 block height and tx index combination
- Include invalid deposits, rewind state, but always persist mint (#10)
- Provide gas to Call/Create in deposit transactions (#12)
- Add docker builds (ref-op-geth PR 16, 17)
- Don't panic on deposit transaction signature values or chain ID (ref-op-geth PR 18)
- core: Add version to DepositTx (ref-op-geth PR 19)
- Enable Geth build/lint/test in CircleCI (ref-op-geth PR 23)
- core: Include guaranteed gas in the gas pool (ref-op-geth PR 21)
- core: handle base fee, l1 availability fee, tx fee (ref-op-geth PR 27)
- fix: deposit tx hash
- fix l1 fee cache, rpc, tracing and tx pool
- core: remove deposit-tx sub-type (a.k.a. deposit version byte)
- eth/catalyst: allow engine user to reorg own chain
- miner: restore ability to reorg deep as block builder
- params: print Optimism consensus type in banner
- core/types: remove unused protected() method, see upstream PR 23376
- core: do not mutate original balance value in tx pool l1 cost adjustment
- core: subtract deposit gas from pool, so other txs do not use the same gas. And fail tx processing if deposits reach gas limit
- core/types: deposits do not tip, avoid basefee subtraction
- Unmeter the L1 Attributes Transaction
- miner: handle force tx errors as critical, clean up diff
- ci: Switch branch
- eth,miner: return STATUS_INVALID when failing to process forced transactions in request (ref-op-geth PR 40)
- verifier: forward tx to sequencer based on flag
- txpool: add flag to disable tx gossip (ref-op-geth PR 42)
- Add op-geth version in addition to geth version (ref-op-geth PR 43)
- ci: CircleCI improvements (ref-op-geth PR 44)
- Rename to op-geth
- Build latest tag on optimism branch
op-geth changes:
- Expose cache config in simulated backend (#2)
- Add EIP-1559 parameters
- eth/catalyst: update payload id computation (#1)
- make eip1559 configurable (#4)
- post-merge network should not log warnings about missing transition information (#5)
- Make the simulator more configurable (#6)
- fix OPB-6 - IsDepositTx check instead of artificial nonce value check (#7)
- Simulated backend - enable proof of stake consensus type and fix performance issue (#8)
- accounts: simulated backend consensus engine option and immediate tx indexing
- consensus/beacon: recognize all blocks as reached TTD with 0 TTD in chain config
- Add --rollup.historicalhttp CLI flag and fix backend iface
- Flags and interfaces for historical RPC requests (#12)
- Redirect historical RPC requests (#13)
- Use the pre-existing ethereum.NotFound error (#18)
- Add historical endpoint to TraceBlockByNumber and TraceBlockByHash (#19)
- Add historical endpoint to TraceTransaction (#20)
- Add historical endpoint to TraceCall (#21)
- optimism: fee params from info txi, update l1 cost func GPO params read (#15)
- add hardcoded addresses for fee payouts (#23)
- dynamic gas limit via engine API (#22)
Co-authored-by: Matthew Slipper <me@matthewslipper.com>
Co-authored-by: Joshua Gutow <jgutow@oplabs.co>
Co-authored-by: protolambda <proto@protolambda.com>
Co-authored-by: Mark Tyneway <mark.tyneway@gmail.com>
Co-authored-by: Maurelian <maurelian@protonmail.ch>
This is a breaking change in the tracing hooks API as well as semantics of the callTracer:
- CaptureEnter hook provided a nil value argument in case of DELEGATECALL. However to stay consistent with how delegate calls behave in EVM this hook is changed to pass in the value of the parent call.
- callTracer will return parent call's value for DELEGATECALL frames.
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This change improves reusability of the EVM struct. Two methods are added:
- SetBlockContext(...)
- SetTracer(...)
Other attributes like the TransactionContext and the StateDB can already be updated.
BlockContext and Tracer are partially not updateable right now. This change fixes it and
opens the potential to reuse an EVM struct in more ways.
Co-authored-by: Felix Lange <fjl@twurst.com>
This change implements withdrawals as specified in EIP-4895.
Co-authored-by: lightclient@protonmail.com <lightclient@protonmail.com>
Co-authored-by: marioevz <marioevz@gmail.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR changes the API so that uint64 is used for fork timestamps.
It's a good choice because types.Header also uses uint64 for time.
Co-authored-by: Felix Lange <fjl@twurst.com>
Implementation of https://eips.ethereum.org/EIPS/eip-3860, limit and meter initcode. This PR enables EIP-3860 as part of the Shanghai fork.
Co-authored-by: lightclient@protonmail.com <lightclient@protonmail.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
This makes non-JS tracers execute all block txs on a single goroutine.
In the previous implementation, we used to prepare every tx pre-state
on one goroutine, and then run the transactions again with tracing enabled.
Native tracers are usually faster, so it is faster overall to use their output as
the pre-state for tracing the next transaction.
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This removes the 'time' field from logs, as well as from the tracer interface. This change makes the trace output deterministic. If a tracer needs the time they can measure it themselves. No need for evm to do this.
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
When the interpreter is configured to use extra-eips, this change makes it so that all the opcodes are deep-copied, to prevent accidental modification of the 'base' jumptable.
Closes: #26136
Co-authored-by: Martin Holst Swende <martin@swende.se>
This adds a
* core/vm, tests: optimized modexp + fuzzer
* common/math: modexp optimizations
* core/vm: special case base 1 in big modexp
* core/vm: disable fastexp
This changes the CI / release builds to use the latest Go version. It also
upgrades golangci-lint to a newer version compatible with Go 1.19.
In Go 1.19, godoc has gained official support for links and lists. The
syntax for code blocks in doc comments has changed and now requires a
leading tab character. gofmt adapts comments to the new syntax
automatically, so there are a lot of comment re-formatting changes in this
PR. We need to apply the new format in order to pass the CI lint stage with
Go 1.19.
With the linter upgrade, I have decided to disable 'gosec' - it produces
too many false-positive warnings. The 'deadcode' and 'varcheck' linters
have also been removed because golangci-lint warns about them being
unmaintained. 'unused' provides similar coverage and we already have it
enabled, so we don't lose much with this change.
This PR allows users to pass in a config object directly to the tracers. Previously only the struct logger was configurable.
It also adds an option to the call tracer which if enabled makes it ignore any subcall and collect only information about the top-level call. See #25419 for discussion.
The tracers will silently ignore if they are passed a config they don't care about.
This enables the following linters
- typecheck
- unused
- staticcheck
- bidichk
- durationcheck
- exportloopref
- gosec
WIth a few exceptions.
- We use a deprecated protobuf in trezor. I didn't want to mess with that, since I cannot meaningfully test any changes there.
- The deprecated TypeMux is used in a few places still, so the warning for it is silenced for now.
- Using string type in context.WithValue is apparently wrong, one should use a custom type, to prevent collisions between different places in the hierarchy of callers. That should be fixed at some point, but may require some attention.
- The warnings for using weak random generator are squashed, since we use a lot of random without need for cryptographic guarantees.
This adds a JS tracer runtime environment based on the Goja VM. The new
runtime replaces the duktape runtime, which will be removed soon.
Goja is implemented in Go and is faster for cases where the Go <-> JS
transition overhead dominates overall performance. It is faster because
duktape is written in C, and the transition cost includes the cost of using
cgo. Another reason for using Goja is that go-duktape is not maintained
anymore.
We expect the performace of JS tracing to be at least as good or better with
this change.
* core,eth: add empty tx logger hooks
* core,eth: add initial and remaining gas to tx hooks
* store tx gasLimit in js tracer
* use gasLimit to compute intrinsic cost for js tracer
* re-use rules in transitiondb
* rm logs
* rm logs
* Mv some fields from Start to TxStart
* simplify sender lookup in prestate tracer
* mv env to TxStart
* Revert "mv env to TxStart"
This reverts commit 656939634b9aff19f55a1cd167345faf8b1ec310.
* Revert "simplify sender lookup in prestate tracer"
This reverts commit ab65bce48007cab99e68232e7aac2fe008338d50.
* Revert "Mv some fields from Start to TxStart"
This reverts commit aa50d3d9b2559addc80df966111ef5fb5d0c1b6b.
* fix intrinsic gas for prestate tracer
* add comments
* refactor
* fix test case
* simplify consumedGas calc in prestate tracer
* core: implement eip-4399 random opcode
* core: make vmconfig threadsafe
* core: miner: pass vmConfig by value not reference
* all: enable 4399 by Rules
* core: remove diff (f)
* tests: set proper difficulty (f)
* smaller diff (f)
* eth/catalyst: nit
* core: make RANDOM a pointer which is only set post-merge
* cmd/evm/internal/t8ntool: fix t8n tracing of 4399
* tests: set difficulty
* cmd/evm/internal/t8ntool: check that baserules are london before applying the merge chainrules
* core/vm: reverse bit order in bytes of code bitmap
This bit order is more natural for bit manipulation operations and we
can eliminate some small number of CPU instructions.
* core/vm: drop lookup table
