This commit is a preparation for the upcoming metropolis hardfork. It
prepares the state, core and vm packages such that integration with
metropolis becomes less of a hassle.
* Difficulty calculation requires header instead of individual
parameters
* statedb.StartRecord renamed to statedb.Prepare and added Finalise
method required by metropolis, which removes unwanted accounts from
the state (i.e. selfdestruct)
* State keeps record of destructed objects (in addition to dirty
objects)
* core/vm pre-compiles may now return errors
* core/vm pre-compiles gas check now take the full byte slice as argument
instead of just the size
* core/vm now keeps several hard-fork instruction tables instead of a
single instruction table and removes the need for hard-fork checks in
the instructions
* core/vm contains a empty restruction function which is added in
preparation of metropolis write-only mode operations
* Adds the bn256 curve
* Adds and sets the metropolis chain config block parameters (2^64-1)
* common/math: optimize PaddedBigBytes, use it more
name old time/op new time/op delta
PaddedBigBytes-8 71.1ns ± 5% 46.1ns ± 1% -35.15% (p=0.000 n=20+19)
name old alloc/op new alloc/op delta
PaddedBigBytes-8 48.0B ± 0% 32.0B ± 0% -33.33% (p=0.000 n=20+20)
* all: unify big.Int zero checks
Various checks were in use. This commit replaces them all with Int.Sign,
which is cheaper and less code.
eg templates:
func before(x *big.Int) bool { return x.BitLen() == 0 }
func after(x *big.Int) bool { return x.Sign() == 0 }
func before(x *big.Int) bool { return x.BitLen() > 0 }
func after(x *big.Int) bool { return x.Sign() != 0 }
func before(x *big.Int) int { return x.Cmp(common.Big0) }
func after(x *big.Int) int { return x.Sign() }
* common/math, crypto/secp256k1: make ReadBits public in package math
* common: remove CurrencyToString
Move denomination values to params instead.
* common: delete dead code
* common: move big integer operations to common/math
This commit consolidates all big integer operations into common/math and
adds tests and documentation.
There should be no change in semantics for BigPow, BigMin, BigMax, S256,
U256, Exp and their behaviour is now locked in by tests.
The BigD, BytesToBig and Bytes2Big functions don't provide additional
value, all uses are replaced by new(big.Int).SetBytes().
BigToBytes is now called PaddedBigBytes, its minimum output size
parameter is now specified as the number of bytes instead of bits. The
single use of this function is in the EVM's MSTORE instruction.
Big and String2Big are replaced by ParseBig, which is slightly stricter.
It previously accepted leading zeros for hexadecimal inputs but treated
decimal inputs as octal if a leading zero digit was present.
ParseUint64 is used in places where String2Big was used to decode a
uint64.
The new functions MustParseBig and MustParseUint64 are now used in many
places where parsing errors were previously ignored.
* common: delete unused big integer variables
* accounts/abi: replace uses of BytesToBig with use of encoding/binary
* common: remove BytesToBig
* common: remove Bytes2Big
* common: remove BigTrue
* cmd/utils: add BigFlag and use it for error-checked integer flags
While here, remove environment variable processing for DirectoryFlag
because we don't use it.
* core: add missing error checks in genesis block parser
* common: remove String2Big
* cmd/evm: use utils.BigFlag
* common/math: check for 256 bit overflow in ParseBig
This is supposed to prevent silent overflow/truncation of values in the
genesis block JSON. Without this check, a genesis block that set a
balance larger than 256 bits would lead to weird behaviour in the VM.
* cmd/utils: fixup import
Reworked the EVM gas instructions to use 64bit integers rather than
arbitrary size big ints. All gas operations, be it additions,
multiplications or divisions, are checked and guarded against 64 bit
integer overflows.
In additon, most of the protocol paramaters in the params package have
been converted to uint64 and are now constants rather than variables.
* common/math: added overflow check ops
* core: vmenv, env renamed to evm
* eth, internal/ethapi, les: unmetered eth_call and cancel methods
* core/vm: implemented big.Int pool for evm instructions
* core/vm: unexported intPool methods & verification methods
* core/vm: added memoryGasCost overflow check and test
Reworked the EVM gas instructions to use 64bit integers rather than
arbitrary size big ints. All gas operations, be it additions,
multiplications or divisions, are checked and guarded against 64 bit
integer overflows.
In additon, most of the protocol paramaters in the params package have
been converted to uint64 and are now constants rather than variables.
* common/math: added overflow check ops
* core: vmenv, env renamed to evm
* eth, internal/ethapi, les: unmetered eth_call and cancel methods
* core/vm: implemented big.Int pool for evm instructions
* core/vm: unexported intPool methods & verification methods
* core/vm: added memoryGasCost overflow check and test
This significantly reduces the dependency closure of ethclient, which no
longer depends on core/vm as of this change.
All uses of vm.Logs are replaced by []*types.Log. NewLog is gone too,
the constructor simply returned a literal.
The run loop, which previously contained custom opcode executes have been
removed and has been simplified to a few checks.
Each operation consists of 4 elements: execution function, gas cost function,
stack validation function and memory size function. The execution function
implements the operation's runtime behaviour, the gas cost function implements
the operation gas costs function and greatly depends on the memory and stack,
the stack validation function validates the stack and makes sure that enough
items can be popped off and pushed on and the memory size function calculates
the memory required for the operation and returns it.
This commit also allows the EVM to go unmetered. This is helpful for offline
operations such as contract calls.
Environment is now a struct (not an interface). This
reduces a lot of tech-debt throughout the codebase where a virtual
machine environment had to be implemented in order to test or run it.
The new environment is suitable to be used en the json tests, core
consensus and light client.
This commit implements EIP158 part 1, 2, 3 & 4
1. If an account is empty it's no longer written to the trie. An empty
account is defined as (balance=0, nonce=0, storage=0, code=0).
2. Delete an empty account if it's touched
3. An empty account is redefined as either non-existent or empty.
4. Zero value calls and zero value suicides no longer consume the 25k
reation costs.
params: moved core/config to params
Signed-off-by: Jeffrey Wilcke <jeffrey@ethereum.org>
This implements 1b & 1c of EIP150 by adding a new GasTable which must be
returned from the RuleSet config method. This table is used to determine
the gas prices for the current epoch.
Please note that when the CreateBySuicide gas price is set it is assumed
that we're in the new epoch phase.
In addition this PR will serve as temporary basis while refactorisation
in being done in the EVM64 PR, which will substentially overhaul the gas
price code.
This CL makes several refactors:
- Define a Tracer interface, implementing the `CaptureState` method
- Add the VM environment as the first argument of
`Tracer.CaptureState`
- Rename existing functionality `StructLogger` an make it an
implementation of `Tracer`
- Delete `StructLogCollector` and make `StructLogger` collect the logs
directly
- Change all callers to use the new `StructLogger` where necessary and
extract logs from that.
- Deletes the apparently obsolete and likely nonfunctional 'TraceCall'
from the eth API.
Callers that only wish accumulated logs can use the `StructLogger`
implementation straightforwardly. Callers that wish to efficiently
capture VM traces and operate on them without excessive copying can now
implement the `Tracer` interface to receive VM state at each step and
do with it as they wish.
This CL also removes the accumulation of logs from the vm.Environment;
this was necessary as part of the refactor, but also simplifies it by
removing a responsibility that doesn't directly belong to the
Environment.
Added chain configuration options and write out during genesis database
insertion. If no "config" was found, nothing is written to the database.
Configurations are written on a per genesis base. This means
that any chain (which is identified by it's genesis hash) can have their
own chain settings.
The EVM was previously initialised and created for every CALL, CALLCODE,
DELEGATECALL and CREATE. This PR changes this behaviour so that the same
EVM can be used through the session and beyond as long as the
Environment sticks around.
* Removed some strange code that didn't apply state reverting properly
* Refactored code setting from vm & state transition to the executioner
* Updated tests
* change gas cost for contract creating txs
* invalidate signature with s value greater than secp256k1 N / 2
* OOG contract creation if not enough gas to store code
* new difficulty adjustment algorithm
* new DELEGATECALL op code
Moved the execution of instructions to the instruction it self. This
will allow for specialised instructions (e.g. segments) to be execution
in the same manner as regular instructions.
* Moved `vm.Transfer` to `core` package and changed execution to call
`env.Transfer` instead of `core.Transfer` directly.
* core/vm: byte code VM moved to jump table instead of switch
* Moved `vm.Transfer` to `core` package and changed execution to call
`env.Transfer` instead of `core.Transfer` directly.
* Byte code VM now shares the same code as the JITVM
* Renamed Context to Contract
* Changed initialiser of state transition & unexported methods
* Removed the Execution object and refactor `Call`, `CallCode` &
`Create` in to their own functions instead of being methods.
* Removed the hard dep on the state for the VM. The VM now
depends on a Database interface returned by the environment. In the
process the core now depends less on the statedb by usage of the env
* Moved `Log` from package `core/state` to package `core/vm`.
Reduced big int allocation by making stack items modifiable. Instead of
adding items such as `common.Big0` to the stack, `new(big.Int)` is
added instead. One must expect that any item that is added to the stack
might change.
Martin Holst Swende
Jeffrey Wilcke
Felix Lange
Nick Johnson
Felix Lange
Jeffrey Wilcke
Ricardo Catalinas Jiménez
Gustav Simonsson