This enables two overrides: the bedrock fork block & the optimism config
being set. The optimism override uses the default EIP 1559 parameters.
These make it easy to setup a node in optimism mode & have a configurable
bedrock block.
All of the rules accessors are also helpful for checking which mode the
node is running in.
This commit squashes the op-geth fork history into a more maintainable
diff for rebasing upon upstream geth.
reference-optimistic-geth changes (origins of op-geth in early Bedrock
development stage):
- Deposit TX Type
- Enable deposit tx in EVM/tx pool
- Change deposit nonce to not be the max nonce
- Extend PayloadAttributesV1 with a Transactions field
- Force deposits at the start of each L2 block
- Fix height check
- noTxPool flag, reproduce block in verifier mode without tx pool interference
- Fix RPC json marshalling (ref op-geth PR 4)
- Deposit txs block height check in block body validation (ref op-geth PR 5)
- core: do not try to reinject deposit txs into tx-pool (ref-op-geth PR 6)
- deposit source hash field instead of L2 block height and tx index combination
- Include invalid deposits, rewind state, but always persist mint (#10)
- Provide gas to Call/Create in deposit transactions (#12)
- Add docker builds (ref-op-geth PR 16, 17)
- Don't panic on deposit transaction signature values or chain ID (ref-op-geth PR 18)
- core: Add version to DepositTx (ref-op-geth PR 19)
- Enable Geth build/lint/test in CircleCI (ref-op-geth PR 23)
- core: Include guaranteed gas in the gas pool (ref-op-geth PR 21)
- core: handle base fee, l1 availability fee, tx fee (ref-op-geth PR 27)
- fix: deposit tx hash
- fix l1 fee cache, rpc, tracing and tx pool
- core: remove deposit-tx sub-type (a.k.a. deposit version byte)
- eth/catalyst: allow engine user to reorg own chain
- miner: restore ability to reorg deep as block builder
- params: print Optimism consensus type in banner
- core/types: remove unused protected() method, see upstream PR 23376
- core: do not mutate original balance value in tx pool l1 cost adjustment
- core: subtract deposit gas from pool, so other txs do not use the same gas. And fail tx processing if deposits reach gas limit
- core/types: deposits do not tip, avoid basefee subtraction
- Unmeter the L1 Attributes Transaction
- miner: handle force tx errors as critical, clean up diff
- ci: Switch branch
- eth,miner: return STATUS_INVALID when failing to process forced transactions in request (ref-op-geth PR 40)
- verifier: forward tx to sequencer based on flag
- txpool: add flag to disable tx gossip (ref-op-geth PR 42)
- Add op-geth version in addition to geth version (ref-op-geth PR 43)
- ci: CircleCI improvements (ref-op-geth PR 44)
- Rename to op-geth
- Build latest tag on optimism branch
op-geth changes:
- Expose cache config in simulated backend (#2)
- Add EIP-1559 parameters
- eth/catalyst: update payload id computation (#1)
- make eip1559 configurable (#4)
- post-merge network should not log warnings about missing transition information (#5)
- Make the simulator more configurable (#6)
- fix OPB-6 - IsDepositTx check instead of artificial nonce value check (#7)
- Simulated backend - enable proof of stake consensus type and fix performance issue (#8)
- accounts: simulated backend consensus engine option and immediate tx indexing
- consensus/beacon: recognize all blocks as reached TTD with 0 TTD in chain config
- Add --rollup.historicalhttp CLI flag and fix backend iface
- Flags and interfaces for historical RPC requests (#12)
- Redirect historical RPC requests (#13)
- Use the pre-existing ethereum.NotFound error (#18)
- Add historical endpoint to TraceBlockByNumber and TraceBlockByHash (#19)
- Add historical endpoint to TraceTransaction (#20)
- Add historical endpoint to TraceCall (#21)
- optimism: fee params from info txi, update l1 cost func GPO params read (#15)
- add hardcoded addresses for fee payouts (#23)
- dynamic gas limit via engine API (#22)
Co-authored-by: Matthew Slipper <me@matthewslipper.com>
Co-authored-by: Joshua Gutow <jgutow@oplabs.co>
Co-authored-by: protolambda <proto@protolambda.com>
Co-authored-by: Mark Tyneway <mark.tyneway@gmail.com>
Co-authored-by: Maurelian <maurelian@protonmail.ch>
The EmptyRootHash and EmptyCodeHash are defined everywhere in the codebase, this PR replaces all of them with unified one defined in core/types package, and also defines constants for TxRoot, WithdrawalsRoot and UncleRoot
The method `GetPayloadBodiesByRangeV1` now returns "-38004: Too large request" error if the requested range is too large, according to spec
Co-authored-by: Martin Holst Swende <martin@swende.se>
This PR relaxes the block body ingress handling a bit: if block body withdrawals are missing (but expected to be empty), the body withdrawals are set to 'empty list' before being passed to upper layers.
This fixes an issue where a block passed from EthereumJS to geth was deemed invalid.
Logs stored on disk have minimal information. Contextual information such as block
number, index of log in block, index of transaction in block are filled in upon request.
We can fill in all these fields only having the block header and list of receipts.
But determining the transaction hash of a log requires the block body.
The goal of this PR is postponing this retrieval until we are sure we the transaction hash.
It happens often that the header bloom filter signals there might be matches in a block,
but after actually checking them reveals the logs do not match. We want to avoid fetching
the body in this case.
Note that this changes the semantics of Backend.GetLogs. Downstream callers of
GetLogs now assume log context fields have not been derived, and need to call
DeriveFields on the logs if necessary.
This is a breaking change in the tracing hooks API as well as semantics of the callTracer:
- CaptureEnter hook provided a nil value argument in case of DELEGATECALL. However to stay consistent with how delegate calls behave in EVM this hook is changed to pass in the value of the parent call.
- callTracer will return parent call's value for DELEGATECALL frames.
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
* common, core, eth, les, trie: make prque generic
* les/vflux/server: fixed issues in priorityPool
* common, core, eth, les, trie: make priority also generic in prque
* les/flowcontrol: add test case for priority accumulator overflow
* les/flowcontrol: avoid priority value overflow
* common/prque: use int priority in some tests
No need to convert to int64 when we can just change the type used by the
queue.
* common/prque: remove comment about int64 range
---------
Co-authored-by: Zsolt Felfoldi <zsfelfoldi@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
This change ports some changes from the main PBSS PR:
- get rid of callback function in `trie.Database.Commit` which is not required anymore
- rework the `nodeResolver` in `trie.Iterator` to make it compatible with multiple state scheme
- some other shallow changes in tests and typo-fixes
According to the spec the payloadID needs to be random or dependent on all arguments, to prevent two payloads from clashing. This change adds withdrawals into the payload derivation.
---------
Co-authored-by: lightclient@protonmail.com <lightclient@protonmail.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR moves core/beacon to beacon/engine so that beacon-chain related code has its own top level package which also can house the the beacon lightclient-code.
This PR moves some trie-related db accessor methods to a different file, and also removes the schema type. Instead of the schema type, a string is used to distinguish between hashbased/pathbased db accessors.
This also moves some code from trie package to rawdb package.
This PR is intended to be a no-functionality-change prep PR for #25963 .
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This change implements withdrawals as specified in EIP-4895.
Co-authored-by: lightclient@protonmail.com <lightclient@protonmail.com>
Co-authored-by: marioevz <marioevz@gmail.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR changes the API so that uint64 is used for fork timestamps.
It's a good choice because types.Header also uses uint64 for time.
Co-authored-by: Felix Lange <fjl@twurst.com>
This change introduces a breaking change to miner.etherbase is configured.
Previously, users did not need to explicitly set the etherbase address via flag, since 'first' local account was used as etherbase automatically. This change removes the "default first account" feature.
In Proof-of-stake world, the fee recipient address is provided by CL, and not configured in Geth any more - meaning that miner.etherbase is mostly for legacy networks(pow, clique networks etc).
