This PR unifies the error handling in miner.
Whenever an error occur while applying a transaction, the transaction should be regarded as invalid and all following transactions from the same sender not executable because of the nonce restriction. The only exception is the `nonceTooLow` error which is handled separately.
This change fixes a flaw where, in certain scenarios, the block sealer did not accurately reset the remaining gas after failing to include an invalid transaction. Fixes#26791
Ensure extra-data can be set in L1 mode, but do not include any
extra-data when building a L2 optimism chain.
Co-authored-by: Adrian Sutton <adrian@oplabs.co>
This commit squashes the op-geth fork history into a more maintainable
diff for rebasing upon upstream geth.
reference-optimistic-geth changes (origins of op-geth in early Bedrock
development stage):
- Deposit TX Type
- Enable deposit tx in EVM/tx pool
- Change deposit nonce to not be the max nonce
- Extend PayloadAttributesV1 with a Transactions field
- Force deposits at the start of each L2 block
- Fix height check
- noTxPool flag, reproduce block in verifier mode without tx pool interference
- Fix RPC json marshalling (ref op-geth PR 4)
- Deposit txs block height check in block body validation (ref op-geth PR 5)
- core: do not try to reinject deposit txs into tx-pool (ref-op-geth PR 6)
- deposit source hash field instead of L2 block height and tx index combination
- Include invalid deposits, rewind state, but always persist mint (#10)
- Provide gas to Call/Create in deposit transactions (#12)
- Add docker builds (ref-op-geth PR 16, 17)
- Don't panic on deposit transaction signature values or chain ID (ref-op-geth PR 18)
- core: Add version to DepositTx (ref-op-geth PR 19)
- Enable Geth build/lint/test in CircleCI (ref-op-geth PR 23)
- core: Include guaranteed gas in the gas pool (ref-op-geth PR 21)
- core: handle base fee, l1 availability fee, tx fee (ref-op-geth PR 27)
- fix: deposit tx hash
- fix l1 fee cache, rpc, tracing and tx pool
- core: remove deposit-tx sub-type (a.k.a. deposit version byte)
- eth/catalyst: allow engine user to reorg own chain
- miner: restore ability to reorg deep as block builder
- params: print Optimism consensus type in banner
- core/types: remove unused protected() method, see upstream PR 23376
- core: do not mutate original balance value in tx pool l1 cost adjustment
- core: subtract deposit gas from pool, so other txs do not use the same gas. And fail tx processing if deposits reach gas limit
- core/types: deposits do not tip, avoid basefee subtraction
- Unmeter the L1 Attributes Transaction
- miner: handle force tx errors as critical, clean up diff
- ci: Switch branch
- eth,miner: return STATUS_INVALID when failing to process forced transactions in request (ref-op-geth PR 40)
- verifier: forward tx to sequencer based on flag
- txpool: add flag to disable tx gossip (ref-op-geth PR 42)
- Add op-geth version in addition to geth version (ref-op-geth PR 43)
- ci: CircleCI improvements (ref-op-geth PR 44)
- Rename to op-geth
- Build latest tag on optimism branch
op-geth changes:
- Expose cache config in simulated backend (#2)
- Add EIP-1559 parameters
- eth/catalyst: update payload id computation (#1)
- make eip1559 configurable (#4)
- post-merge network should not log warnings about missing transition information (#5)
- Make the simulator more configurable (#6)
- fix OPB-6 - IsDepositTx check instead of artificial nonce value check (#7)
- Simulated backend - enable proof of stake consensus type and fix performance issue (#8)
- accounts: simulated backend consensus engine option and immediate tx indexing
- consensus/beacon: recognize all blocks as reached TTD with 0 TTD in chain config
- Add --rollup.historicalhttp CLI flag and fix backend iface
- Flags and interfaces for historical RPC requests (#12)
- Redirect historical RPC requests (#13)
- Use the pre-existing ethereum.NotFound error (#18)
- Add historical endpoint to TraceBlockByNumber and TraceBlockByHash (#19)
- Add historical endpoint to TraceTransaction (#20)
- Add historical endpoint to TraceCall (#21)
- optimism: fee params from info txi, update l1 cost func GPO params read (#15)
- add hardcoded addresses for fee payouts (#23)
- dynamic gas limit via engine API (#22)
Co-authored-by: Matthew Slipper <me@matthewslipper.com>
Co-authored-by: Joshua Gutow <jgutow@oplabs.co>
Co-authored-by: protolambda <proto@protolambda.com>
Co-authored-by: Mark Tyneway <mark.tyneway@gmail.com>
Co-authored-by: Maurelian <maurelian@protonmail.ch>
This change implements withdrawals as specified in EIP-4895.
Co-authored-by: lightclient@protonmail.com <lightclient@protonmail.com>
Co-authored-by: marioevz <marioevz@gmail.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Felix Lange <fjl@twurst.com>
This change introduces a breaking change to miner.etherbase is configured.
Previously, users did not need to explicitly set the etherbase address via flag, since 'first' local account was used as etherbase automatically. This change removes the "default first account" feature.
In Proof-of-stake world, the fee recipient address is provided by CL, and not configured in Geth any more - meaning that miner.etherbase is mostly for legacy networks(pow, clique networks etc).
This PR changes geth to read the eip1559 params from the chain config instead of the globals.
This way the parameters may be changed by forking the chain config code, without creating a large diff throughout the past and future usages of the parameters.
Co-authored-by: Martin Holst Swende <martin@swende.se>
* eth/catalyst: build the execution payload async
* miner: added comment, added test case
* eth/catalyst: miner: move async block production to miner
* eth/catalyst, miner: support generate seal block async
* miner: rework GetSealingBlockAsync to use a passed channel
* miner: apply rjl's diff
* eth/catalyst: nitpicks
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
During mining, when a new head arrives and interrupts the block building, the block being built should not be commited (but discarded). Committing the interrupted block introduces unnecessary delay, and possibly causes miner to mine on the previous head, which could result in higher uncle rate.
* eth, miner: remove duplicated code
* eth/catalyst: remove unneeded code
* miner: keep update pending state even the Merge is happened
* eth, miner: rebase
* miner: fix tests
* eth, miner: address comments from marius
* miner: use empty zero randomness for pending blocks after the merge
* eth/catalyst: gofmt
* miner: add warning log for state recovery
* miner: ignore uncles for post-merge blocks
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* all: work for eth1/2 transtition
* consensus/beacon, eth: change beacon difficulty to 0
* eth: updates
* all: add terminalBlockDifficulty config, fix rebasing issues
* eth: implemented merge interop spec
* internal/ethapi: update to v1.0.0.alpha.2
This commit updates the code to the new spec, moving payloadId into
it's own object. It also fixes an issue with finalizing an empty blockhash.
It also properly sets the basefee
* all: sync polishes, other fixes + refactors
* core, eth: correct semantics for LeavePoW, EnterPoS
* core: fixed rebasing artifacts
* core: light: performance improvements
* core: use keyed field (f)
* core: eth: fix compilation issues + tests
* eth/catalyst: dbetter error codes
* all: move Merger to consensus/, remove reliance on it in bc
* all: renamed EnterPoS and LeavePoW to ReachTDD and FinalizePoS
* core: make mergelogs a function
* core: use InsertChain instead of InsertBlock
* les: drop merger from lightchain object
* consensus: add merger
* core: recoverAncestors in catalyst mode
* core: fix nitpick
* all: removed merger from beacon, use TTD, nitpicks
* consensus: eth: add docstring, removed unnecessary code duplication
* consensus/beacon: better comment
* all: easy to fix nitpicks by karalabe
* consensus/beacon: verify known headers to be sure
* core: comments
* core: eth: don't drop peers who advertise blocks, nitpicks
* core: never add beacon blocks to the future queue
* core: fixed nitpicks
* consensus/beacon: simplify IsTTDReached check
* consensus/beacon: correct IsTTDReached check
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
This PR fixes a problem which arises on clique networks when there is a network stall. Previously, the worker packages were tracked, even if the sealing engine decided not to seal the block (due to clique rules about recent signing). These tracked-but-not-sealed blocks kept building up in memory.
This PR changes the situation so the sealing engine instead returns an error, and the worker can thus un-track the package.
This fixes a data race on worker.current by moving the call to StopPrefetcher
into the main loop.
The commit also contains fixes for two other races in unit tests of unrelated packages.
* core/types, miner: create TxWithMinerFee wrapper, add EIP-1559 support to TransactionsByMinerFeeAndNonce
miner: set base fee when creating a new header, handle gas limit, log miner fees
* all: rename to NewTransactionsByPriceAndNonce
* core/types, miner: rename to NewTransactionsByPriceAndNonce + EffectiveTip
miner: activate 1559 for testGenerateBlockAndImport tests
* core,miner: revert naming to TransactionsByPriceAndTime
* core/types/transaction: update effective tip calculation logic
* miner: update aleut to london
* core/types/transaction_test: use correct signer for 1559 txs + add back sender check
* miner/worker: calculate gas target from gas limit
* core, miner: fix block gas limits for 1559
Co-authored-by: Ansgar Dietrichs <adietrichs@gmail.com>
Co-authored-by: lightclient@protonmail.com <lightclient@protonmail.com>
This adds support for EIP-2718 typed transactions as well as EIP-2930
access list transactions (tx type 1). These EIPs are scheduled for the
Berlin fork.
There very few changes to existing APIs in core/types, and several new APIs
to deal with access list transactions. In particular, there are two new
constructor functions for transactions: types.NewTx and types.SignNewTx.
Since the canonical encoding of typed transactions is not RLP-compatible,
Transaction now has new methods for encoding and decoding: MarshalBinary
and UnmarshalBinary.
The existing EIP-155 signer does not support the new transaction types.
All code dealing with transaction signatures should be updated to use the
newer EIP-2930 signer. To make this easier for future updates, we have
added new constructor functions for types.Signer: types.LatestSigner and
types.LatestSignerForChainID.
This change also adds support for the YoloV3 testnet.
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: Ryan Schneider <ryanleeschneider@gmail.com>
The PR makes use of the stacktrie, which is is more lenient on resource consumption, than the regular trie, in cases where we only need it for DeriveSha
This PR removes a logic in the miner, which was originally intended to help temporary testnets based on ethash from "running off into the future". If the difficulty was low, and a few computers started mining several blocks per second, the ethash rules (which demand 1s delay between blocks) would push the blocktimes further and further away.
The solution was to make the miner sleep while this happened.
Nowadays, this problem is solved instead by PoA chains, and it's recommended to let testnets and devnets be based on clique instead. The existing logic is problematic, since it can cause stalls within the miner making it difficult for remote workers to submit work if the channel is blocked on a sleep.
Credits to Saar Tochner for reporting this via the bug bounty
In miner/worker.go, there are two goroutine using channel w.newWorkCh: newWorkerLoop() sends to this channel, and mainLoop() receives from this channel. Only the receive operation is in a select.
However, w.exitCh may be closed by another goroutine. This is fine for the receive since receive is in select, but if the send operation is blocking, then it will block forever. This commit puts the send in a select, so it won't block even if w.exitCh is closed.
Similarly, there are two goroutines using channel errc: the parent that runs the test receives from it, and the child created at line 573 sends to it. If the parent goroutine exits too early by calling t.Fatalf() at line 614, then the child goroutine will be blocked at line 574 forever. This commit adds 1 buffer to errc. Now send will not block, and receive is not influenced because receive still needs to wait for the send.
A lot of times when we hit 'core' errors, example: invalid tx, the information provided is
insufficient. We miss several pieces of information: what account has nonce too high,
and what transaction in that block was offending?
This PR adds that information, using the new type of wrapped errors.
It also adds a testcase which (partly) verifies the output from the errors.
The first commit changes all usage of direct equality-checks on core errors, into
using errors.Is. The second commit adds contextual information. This wraps most
of the core errors with more information, and also wraps it one more time in
stateprocessor, to further provide tx index and tx hash, if such a tx is encoutered in
a block. The third commit uses the chainmaker to try to generate chains with such
errors in them, thus triggering the errors and checking that the generated string meets
expectations.
This PR changes several different things:
- Adds test cases for the miner loop
- Stops the worker if it wasn't already stopped in worker.Close()
- Uses channels instead of atomics in the miner.update() loop
Co-authored-by: Felix Lange <fjl@twurst.com>
protolambda
Adrian Sutton
rjl493456442
s7v7nislands
Péter Szilágyi
Joshua Gutow
Marius van der Wijden
Mark Tyneway
Jolly Zhao
Mateusz Morusiewicz
Martin Holst Swende
Lee Bousfield
jwasinger
Felföldi Zsolt
lightclient
ucwong
lzhfromustc