op-geth/les/server.go

282 lines
9.1 KiB
Go
Raw Normal View History

2016-11-09 01:01:56 +00:00
// Copyright 2016 The go-ethereum Authors
2016-10-14 03:51:29 +00:00
// This file is part of the go-ethereum library.
//
// The go-ethereum library is free software: you can redistribute it and/or modify
// it under the terms of the GNU Lesser General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// The go-ethereum library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public License
// along with the go-ethereum library. If not, see <http://www.gnu.org/licenses/>.
package les
import (
"crypto/ecdsa"
"time"
2016-10-14 03:51:29 +00:00
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 11:32:48 +00:00
"github.com/ethereum/go-ethereum/common/mclock"
2016-10-14 03:51:29 +00:00
"github.com/ethereum/go-ethereum/eth"
"github.com/ethereum/go-ethereum/les/flowcontrol"
"github.com/ethereum/go-ethereum/light"
"github.com/ethereum/go-ethereum/log"
"github.com/ethereum/go-ethereum/node"
2016-10-14 03:51:29 +00:00
"github.com/ethereum/go-ethereum/p2p"
"github.com/ethereum/go-ethereum/p2p/discv5"
"github.com/ethereum/go-ethereum/p2p/enode"
"github.com/ethereum/go-ethereum/p2p/enr"
"github.com/ethereum/go-ethereum/params"
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 11:32:48 +00:00
"github.com/ethereum/go-ethereum/rpc"
2016-10-14 03:51:29 +00:00
)
type LesServer struct {
lesCommons
archiveMode bool // Flag whether the ethereum node runs in archive mode.
peers *clientPeerSet
serverset *serverSet
handler *serverHandler
lesTopics []discv5.Topic
privateKey *ecdsa.PrivateKey
// Flow control and capacity management
fcManager *flowcontrol.ClientManager
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 11:32:48 +00:00
costTracker *costTracker
defParams flowcontrol.ServerParams
servingQueue *servingQueue
clientPool *clientPool
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 11:32:48 +00:00
minCapacity, maxCapacity, freeCapacity uint64
threadsIdle int // Request serving threads count when system is idle.
threadsBusy int // Request serving threads count when system is busy(block insertion).
p2pSrv *p2p.Server
2016-10-14 03:51:29 +00:00
}
func NewLesServer(node *node.Node, e *eth.Ethereum, config *eth.Config) (*LesServer, error) {
// Collect les protocol version information supported by local node.
lesTopics := make([]discv5.Topic, len(AdvertiseProtocolVersions))
for i, pv := range AdvertiseProtocolVersions {
lesTopics[i] = lesTopic(e.BlockChain().Genesis().Hash(), pv)
}
// Calculate the number of threads used to service the light client
// requests based on the user-specified value.
threads := config.LightServ * 4 / 100
if threads < 4 {
threads = 4
}
srv := &LesServer{
lesCommons: lesCommons{
genesis: e.BlockChain().Genesis().Hash(),
config: config,
chainConfig: e.BlockChain().Config(),
iConfig: light.DefaultServerIndexerConfig,
chainDb: e.ChainDb(),
chainReader: e.BlockChain(),
chtIndexer: light.NewChtIndexer(e.ChainDb(), nil, params.CHTFrequency, params.HelperTrieProcessConfirmations, true),
bloomTrieIndexer: light.NewBloomTrieIndexer(e.ChainDb(), nil, params.BloomBitsBlocks, params.BloomTrieFrequency, true),
closeCh: make(chan struct{}),
},
archiveMode: e.ArchiveMode(),
peers: newClientPeerSet(),
serverset: newServerSet(),
lesTopics: lesTopics,
fcManager: flowcontrol.NewClientManager(nil, &mclock.System{}),
servingQueue: newServingQueue(int64(time.Millisecond*10), float64(config.LightServ)/100),
threadsBusy: config.LightServ/100 + 1,
threadsIdle: threads,
p2pSrv: node.Server(),
}
srv.handler = newServerHandler(srv, e.BlockChain(), e.ChainDb(), e.TxPool(), e.Synced)
srv.costTracker, srv.minCapacity = newCostTracker(e.ChainDb(), config)
srv.freeCapacity = srv.minCapacity
srv.oracle = srv.setupOracle(node, e.BlockChain().Genesis().Hash(), config)
// Initialize the bloom trie indexer.
e.BloomIndexer().AddChildIndexer(srv.bloomTrieIndexer)
// Initialize server capacity management fields.
srv.defParams = flowcontrol.ServerParams{
BufLimit: srv.freeCapacity * bufLimitRatio,
MinRecharge: srv.freeCapacity,
}
// LES flow control tries to more or less guarantee the possibility for the
// clients to send a certain amount of requests at any time and get a quick
// response. Most of the clients want this guarantee but don't actually need
// to send requests most of the time. Our goal is to serve as many clients as
// possible while the actually used server capacity does not exceed the limits
totalRecharge := srv.costTracker.totalRecharge()
srv.maxCapacity = srv.freeCapacity * uint64(srv.config.LightPeers)
if totalRecharge > srv.maxCapacity {
srv.maxCapacity = totalRecharge
}
srv.fcManager.SetCapacityLimits(srv.freeCapacity, srv.maxCapacity, srv.freeCapacity*2)
srv.clientPool = newClientPool(srv.chainDb, srv.freeCapacity, mclock.System{}, func(id enode.ID) { go srv.peers.unregister(id.String()) })
srv.clientPool.setDefaultFactors(priceFactors{0, 1, 1}, priceFactors{0, 1, 1})
checkpoint := srv.latestLocalCheckpoint()
if !checkpoint.Empty() {
log.Info("Loaded latest checkpoint", "section", checkpoint.SectionIndex, "head", checkpoint.SectionHead,
"chtroot", checkpoint.CHTRoot, "bloomroot", checkpoint.BloomRoot)
}
srv.chtIndexer.Start(e.BlockChain())
node.RegisterProtocols(srv.Protocols())
node.RegisterAPIs(srv.APIs())
node.RegisterLifecycle(srv)
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 11:32:48 +00:00
return srv, nil
}
2016-10-14 03:51:29 +00:00
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 11:32:48 +00:00
func (s *LesServer) APIs() []rpc.API {
return []rpc.API{
{
Namespace: "les",
Version: "1.0",
Service: NewPrivateLightAPI(&s.lesCommons),
Public: false,
},
{
Namespace: "les",
Version: "1.0",
Service: NewPrivateLightServerAPI(s),
Public: false,
},
{
Namespace: "debug",
Version: "1.0",
Service: NewPrivateDebugAPI(s),
Public: false,
},
2016-10-14 03:51:29 +00:00
}
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 11:32:48 +00:00
}
2016-10-14 03:51:29 +00:00
func (s *LesServer) Protocols() []p2p.Protocol {
ps := s.makeProtocols(ServerProtocolVersions, s.handler.runPeer, func(id enode.ID) interface{} {
if p := s.peers.peer(id.String()); p != nil {
return p.Info()
}
return nil
}, nil)
// Add "les" ENR entries.
for i := range ps {
ps[i].Attributes = []enr.Entry{&lesEntry{}}
}
return ps
2016-10-14 03:51:29 +00:00
}
// Start starts the LES server
func (s *LesServer) Start() error {
s.privateKey = s.p2pSrv.PrivateKey
s.handler.start()
s.wg.Add(1)
go s.capacityManagement()
les, les/flowcontrol: improved request serving and flow control (#18230) This change - implements concurrent LES request serving even for a single peer. - replaces the request cost estimation method with a cost table based on benchmarks which gives much more consistent results. Until now the allowed number of light peers was just a guess which probably contributed a lot to the fluctuating quality of available service. Everything related to request cost is implemented in a single object, the 'cost tracker'. It uses a fixed cost table with a global 'correction factor'. Benchmark code is included and can be run at any time to adapt costs to low-level implementation changes. - reimplements flowcontrol.ClientManager in a cleaner and more efficient way, with added capabilities: There is now control over bandwidth, which allows using the flow control parameters for client prioritization. Target utilization over 100 percent is now supported to model concurrent request processing. Total serving bandwidth is reduced during block processing to prevent database contention. - implements an RPC API for the LES servers allowing server operators to assign priority bandwidth to certain clients and change prioritized status even while the client is connected. The new API is meant for cases where server operators charge for LES using an off-protocol mechanism. - adds a unit test for the new client manager. - adds an end-to-end test using the network simulator that tests bandwidth control functions through the new API.
2019-02-26 11:32:48 +00:00
if s.p2pSrv.DiscV5 != nil {
for _, topic := range s.lesTopics {
topic := topic
go func() {
logger := log.New("topic", topic)
logger.Info("Starting topic registration")
defer logger.Info("Terminated topic registration")
s.p2pSrv.DiscV5.RegisterTopic(topic, s.closeCh)
}()
}
}
return nil
}
// Stop stops the LES service
func (s *LesServer) Stop() error {
close(s.closeCh)
// Disconnect existing connections with other LES servers.
s.serverset.close()
// Disconnect existing sessions.
// This also closes the gate for any new registrations on the peer set.
// sessions which are already established but not added to pm.peers yet
// will exit when they try to register.
s.peers.close()
s.fcManager.Stop()
s.costTracker.stop()
s.handler.stop()
s.clientPool.stop() // client pool should be closed after handler.
s.servingQueue.stop()
// Note, bloom trie indexer is closed by parent bloombits indexer.
s.chtIndexer.Close()
s.wg.Wait()
log.Info("Les server stopped")
2016-10-14 03:51:29 +00:00
return nil
}
// capacityManagement starts an event handler loop that updates the recharge curve of
// the client manager and adjusts the client pool's size according to the total
// capacity updates coming from the client manager
func (s *LesServer) capacityManagement() {
defer s.wg.Done()
2016-10-14 03:51:29 +00:00
processCh := make(chan bool, 100)
sub := s.handler.blockchain.SubscribeBlockProcessingEvent(processCh)
defer sub.Unsubscribe()
2016-11-13 11:34:50 +00:00
totalRechargeCh := make(chan uint64, 100)
totalRecharge := s.costTracker.subscribeTotalRecharge(totalRechargeCh)
2016-11-13 11:34:50 +00:00
totalCapacityCh := make(chan uint64, 100)
totalCapacity := s.fcManager.SubscribeTotalCapacity(totalCapacityCh)
s.clientPool.setLimits(s.config.LightPeers, totalCapacity)
var (
busy bool
freePeers uint64
blockProcess mclock.AbsTime
)
updateRecharge := func() {
if busy {
s.servingQueue.setThreads(s.threadsBusy)
s.fcManager.SetRechargeCurve(flowcontrol.PieceWiseLinear{{0, 0}, {totalRecharge, totalRecharge}})
} else {
s.servingQueue.setThreads(s.threadsIdle)
s.fcManager.SetRechargeCurve(flowcontrol.PieceWiseLinear{{0, 0}, {totalRecharge / 10, totalRecharge}, {totalRecharge, totalRecharge}})
}
}
updateRecharge()
for {
select {
case busy = <-processCh:
if busy {
blockProcess = mclock.Now()
} else {
blockProcessingTimer.Update(time.Duration(mclock.Now() - blockProcess))
2016-10-14 03:51:29 +00:00
}
updateRecharge()
case totalRecharge = <-totalRechargeCh:
totalRechargeGauge.Update(int64(totalRecharge))
updateRecharge()
case totalCapacity = <-totalCapacityCh:
totalCapacityGauge.Update(int64(totalCapacity))
newFreePeers := totalCapacity / s.freeCapacity
if newFreePeers < freePeers && newFreePeers < uint64(s.config.LightPeers) {
log.Warn("Reduced free peer connections", "from", freePeers, "to", newFreePeers)
}
freePeers = newFreePeers
s.clientPool.setLimits(s.config.LightPeers, totalCapacity)
case <-s.closeCh:
return
2016-10-14 03:51:29 +00:00
}
}
2016-10-14 03:51:29 +00:00
}