936440fccd
use libp2p peer events to track peer ( #1468 )
...
this resolves some peer counting issues that were happening because the
lifetime future in PeerInfo was unreliable (multiple PeerInfo instances
existed per peer)
In addition, this solves another race condition: when connecting to a
peer and later dialling that protocol, it is not certain that the same
connection will be used if there's a concurrent incoming peer connection
ongoing - better not make too many assumptions about who sent statuses
when.
2020-08-10 12:58:34 +02:00
cd0f4a2d23
bump vendor/nim-metrics
2020-08-09 16:38:30 +02:00
5e9c91381e
bump submodules ( #1472 )
...
* fork News
* bump submodules
2020-08-08 18:00:19 +02:00
3d39757321
auto-bump nim-libp2p ( #1461 )
...
Co-authored-by: = <arnetheduck@users.noreply.github.com>
2020-08-07 18:29:13 +02:00
8d14e0aca6
auto-bump nim-libp2p ( #1446 )
...
Co-authored-by: = <arnetheduck@users.noreply.github.com>
2020-08-06 12:45:14 +02:00
6d3f1b93be
bump
2020-08-05 19:34:59 +03:00
221f372dbc
use peer id in a number of places
2020-08-05 19:34:59 +03:00
b13b04bd7b
auto-bump nim-libp2p ( #1444 )
...
Co-authored-by: = <dryajov@users.noreply.github.com>
2020-08-05 13:02:14 +02:00
ae072d39e6
auto-bump nim-libp2p ( #1427 )
...
Co-authored-by: = <stefantalpalaru@users.noreply.github.com>
2020-08-05 03:16:10 +02:00
25474d055b
Bump eth2-testnets
2020-08-04 17:27:19 +03:00
771ed7044a
auto-bump nim-libp2p ( #1412 )
...
Co-authored-by: = <dryajov@users.noreply.github.com>
2020-08-04 04:54:19 +00:00
52d9d269d7
bump libp2p (delayed send, without hooks) ( #1413 )
...
* use `switch.isConnected`
* libp2p
* add timeout to publish
* use isConnected
* adjust timeouts
* latest libp2p master
* do not drop peers
2020-08-03 16:43:22 +00:00
8c2a9a4950
Switch back to the old undepleted Infura key; Bake in the Medalla genesis state
2020-08-03 03:59:45 +03:00
d052623381
Fix a trivial issue with 'make medalla' and add more logging
2020-08-03 00:19:25 +03:00
c293254ded
Add 'deposits import' command; Switch to NJS when loading the keystores and improve the data validation
2020-08-02 23:00:43 +03:00
2a94f6eca6
medalla-deposit target capable of executing mass deposits
2020-08-02 23:00:43 +03:00
25d7a17745
Revert "bump"
...
This reverts commit adbcde07f2
2020-08-02 11:57:46 +02:00
adbcde07f2
bump
2020-08-02 11:46:12 +02:00
8ab9174208
bump vendor/nim-chronicles ( #1405 )
2020-07-31 01:48:58 +02:00
f2512a0c71
Nim-1.2.6-RC1 ( #1398 )
...
* Nim-1.2.6-RC1
* Azure: bump cache key
2020-07-30 14:08:49 +02:00
0c60e452e7
Allow the deposit contract deployment block to be specified as a number (needed for Medalla)
2020-07-28 18:13:01 +03:00
40ea9e9886
Integrate the Wallet support with the Deposits creation; Produce Launchpad-compatible deposits
2020-07-28 07:36:25 +03:00
fcd412f7a1
Finish the 'create wallet' command; Addresses #1319
2020-07-28 07:36:25 +03:00
20a2525390
v0.12.2 beacon chain protocol update ( #1378 )
2020-07-27 12:59:57 +02:00
5a4f6b7e5e
Restore the SSZ fuzzign tests to working state
2020-07-22 16:20:07 +03:00
6712c7bdfd
Bumps2 ( #1336 )
...
* bumps
2020-07-17 07:02:10 +00:00
9571cb5f7a
bump vendor/nimbus-build-system
2020-07-16 21:08:27 +02:00
88a9629c2b
bump submodules
2020-07-14 03:01:23 +02:00
b0470d7318
bumps ( #1289 )
...
Co-authored-by: Jacek Sieka <jacek@status.im>
2020-07-13 22:05:04 +02:00
d6897409e4
bump-eth ( #1310 )
2020-07-13 16:58:56 +02:00
80cba4db91
Bump nim-eth ( #1305 )
2020-07-13 12:46:05 +02:00
c544a3b250
Bump nimcrypto. ( #1301 )
...
* Bump nimcrypto.
* Add more recent version
2020-07-11 15:14:23 +02:00
c06c60dcaf
Merge branch 'devel' into cli-reforms
2020-07-10 16:23:27 +03:00
396825344c
Bump nim-eth and adjust code for it ( #1293 )
2020-07-10 11:17:15 +02:00
540b2828b2
Adapt the local sim scripts to use the new run-time presets
2020-07-10 01:08:54 +03:00
318b225ccd
Merge devel and resolve the conflicts
2020-07-08 15:36:03 +03:00
c4af4e2f35
Working test suite with run-time presets
2020-07-08 02:02:14 +03:00
6fe0a623f5
Crypto rng ( #1284 )
...
* use bearssl rng throughout
* bump
* bump
* move keygen out of crypto
2020-07-07 17:51:02 +02:00
98761afc64
Run beacon_node --network=altona without initial Eth1 syncing
2020-07-02 18:52:48 +03:00
e342b96d2e
Embed the Altona metadata in the NBC executable
2020-07-02 18:14:11 +03:00
76c12d493e
Add check for late attestation sent messages in logtrace tool.
2020-07-02 10:36:04 +03:00
c43bf48de2
Bump vendor/nim-eth ( #1268 )
2020-07-01 16:05:42 +02:00
ef2f037571
bump libp2p ( #1267 )
2020-07-01 13:41:40 +02:00
76a9708dff
bumping libp2p to latest master ( #1258 )
2020-06-30 09:43:39 +02:00
b4db2ad693
remove v0.11.3 support; add block_sim to CI ( #1253 )
...
* remove v0.11.3 support; add block_sim to CI
* rm stray PERSISTENT_COMMITTEE_PERIOD
* remove TopicFilter.InteropAttestations
* bump two comment-spec-refs to v0.12.1
2020-06-29 18:08:58 +00:00
31e31bb30c
Switch to monitoring of Blocks; More accurate genesis detection and faster Eth1 syncing
2020-06-29 02:18:48 +03:00
816779733e
use the eth2 message id for gossip (in logging too) ( #1246 )
...
* use the eth2 message id for gossip (in logging too)
* bump
* add spec link
2020-06-28 22:06:50 +02:00
70d468ac2b
bump libp2p ( #1232 )
2020-06-26 21:01:00 +02:00
384e512031
Implement EIP-2386 wallets; Progress towards a CLI for interactive wallet creation
...
For more information:
4494da0966/EIPS/eip-2386.md (specification)
2020-06-24 23:06:05 +03:00
f20f077827
Introduce some short-cuts in the Eth1 monitoring for faster syncing
2020-06-24 19:22:52 +03:00
12ee61421f
bump nim-blscurve to switch default to v0.12.x BLS ( #1228 )
2020-06-24 14:53:16 +00:00
1d709c09f4
secp: requiresInit ( #1210 )
...
* secp: requiresInit
* bump
2020-06-22 21:40:19 +02:00
a2e28bef27
Further removal of enum support; Bump modules
2020-06-22 20:14:14 +03:00
c06682f588
Makefile: move "nat-libs" to "deps"
2020-06-22 17:08:29 +02:00
7211a99086
Smooth out the differences between Ganache and Infura; Working local sim and Altona target
2020-06-22 17:30:04 +03:00
14274587cf
More user-friendly logging during mainchain monitoring
2020-06-22 17:30:04 +03:00
ffb613d3c6
Usability enhancements for Tmux
...
* Press 'q' to quit Tmux
* In case of errors, Tmux will wait for a keypress before closing a pane
2020-06-22 17:30:04 +03:00
3d9aff5d23
Fix some logical typos introduced in the rebase
2020-06-22 17:30:04 +03:00
1def383ad1
Reword the Tmux setup to handle all simulation scenarios in more visible way
2020-06-22 17:30:04 +03:00
e9d68e2f7b
Add simulation mode that bootstraps from an Eth1 ganache instance
2020-06-22 17:30:04 +03:00
7d3160b0b5
Local sim now includes a prometheus server, a Ganache instance and a simulation dashboard server (in Tmux mode)
2020-06-22 17:30:04 +03:00
a661ecbae1
bump libp2p ( #1209 )
2020-06-21 18:45:28 +02:00
e61776b9ab
Merge pull request #1105 from status-im/Nim-1-2-2
...
Nim-1.2.2
2020-06-17 19:28:11 +02:00
073046f8ab
bump libp2p
2020-06-17 13:21:12 +00:00
e072997e97
Nim-1.2.2
2020-06-17 14:42:22 +02:00
00537b391c
updated news - includes a fix for the test suite of nim-web3
2020-06-17 11:15:55 +03:00
9335533503
bump submodules
2020-06-16 04:27:20 +00:00
f3fd7e17a3
Revert "bump libp2p ( #1173 )"
...
This reverts commit 95a8a0e81c
2020-06-15 14:31:28 +00:00
95a8a0e81c
bump libp2p ( #1173 )
2020-06-14 13:45:05 +02:00
cd80fab5a9
add link to nimbus-build-system docs
2020-06-13 02:01:19 +02:00
68a8b7d969
Filter discovery nodes on forkId ( #1162 )
2020-06-12 16:14:18 +02:00
f9c5769d42
bump libp2p
2020-06-11 10:12:52 +02:00
016cc22173
show peer info on connect ( #1155 )
2020-06-11 07:14:26 +02:00
4517bf5dd4
Merge pull request #1156 from status-im/bump
...
bump submodules
2020-06-09 22:29:16 +02:00
8f7541959a
allow compile-time switching between v0.11.3 and v0.12.1
2020-06-09 18:39:05 +00:00
cc13153fc6
initial 0.12.1 beacon chain spec
2020-06-09 18:39:05 +00:00
2a70f8c9d1
bump submodules
2020-06-09 20:00:33 +02:00
9c1da836f7
fix all comments
2020-06-10 00:50:10 +08:00
77364548e2
rebase from devel
2020-06-10 00:29:29 +08:00
b3710bfc0b
updated nim-json-rpc to use instead of in logScope
2020-06-09 17:07:47 +03:00
63d8966316
bump submodules
2020-06-06 17:20:54 +00:00
99b2d6758a
upping libp2p ( #1135 )
2020-06-06 10:35:36 +02:00
83eeff4da9
Bump chronos
2020-06-05 20:10:43 +03:00
1e51ee1d01
Bump nim-eth
2020-06-05 19:37:42 +03:00
0c78fc39e7
Use the latest LibP2P
2020-06-05 19:34:12 +03:00
32bc4d9096
Use {.push raises.} in spec/datatypes
...
This was an attempt to trigger a previously reported crash, but
everything turned out to be fine.
2020-06-05 19:33:30 +03:00
b22e5b6d1d
Fix #1108 ( #1119 )
2020-06-04 13:32:50 +02:00
56ffb696be
reorder ssz ( #1099 )
...
* reorder ssz
* split into hash_trees and ssz_serialization, roughly, for hashing and
IO
* move bitseqs into ssz (from stew)
* clean up imports
* docs, imports
2020-06-03 15:52:02 +02:00
ef90a45509
Bump testutils
2020-06-01 16:58:28 +03:00
0bcdabfcdf
Detect another invalid SSZ input found through fuzzing
...
The first offset of an SSZ object should always have a fixed constant
value. Otherwise, some unused bytes may appear between the fixed portion
and the dynamic portion.
Please note that this fix shutds down the minimal forward compatibility
currently supported by the SSZ format (and thus, the expected behavior
must be clarified in the SSZ spec).
2020-05-30 14:47:35 +03:00
8d1fb2f3a6
Bump nim-eth to fix 'make witti'
2020-05-29 21:13:58 +03:00
e33c8d9067
Bump nim-eth and accompanying discv5 cleanup ( #1081 )
2020-05-29 12:03:29 +02:00
4b731b266d
bump vendor/nimbus-build-system
2020-05-29 00:18:47 +02:00
49c33f0890
Use v0.12 ready BLS curve
2020-05-28 15:09:56 +00:00
e238e8186c
bumping libp2p to latest master ( #1075 )
2020-05-28 06:38:07 +02:00
489565b5ab
Makefile: small testnet targets refactoring ( #1078 )
2020-05-28 06:28:10 +02:00
47864c7c6c
Fix wrong bump
2020-05-27 20:14:31 +03:00
fe2bcb20d2
Bump modules to fix 'make witti-dev'
2020-05-27 20:13:18 +03:00
28128f4d2f
Add a handler for the Goodbye message
...
The lack of body of `goodbye` in sync_protocol.nim was preventing
the respective LibP2P protocol to be mounted and advertised on the
network.
Adding a body fixes that, but I've also made some changes in the
P2P protocol codegen that will prevent the issue from happening
again (no body is now considered the equivalent of having an empty
body).
2020-05-26 22:17:26 +03:00
b6c9de968f
Fix some build problems and warnings
2020-05-25 20:33:03 +03:00
f41d823d07
Bump modules
2020-05-25 13:41:42 +03:00
833f19e942
Reform the networking layer in order to handle the new stricter SSZ API
2020-05-24 19:00:34 +03:00
f16fb31060
bump vendor/nimbus-build-system
2020-05-22 13:51:37 +00:00
e4173860f0
bump vendor/nimbus-build-system ( #1050 )
...
* bump vendor/nimbus-build-system
* Jenkins: switch to Bash for the "Build" stage
2020-05-21 00:02:05 +02:00
46a99c35f0
bump vendor/nimbus-build-system
2020-05-20 15:55:31 +02:00
202bbbab6c
Bump some modules
2020-05-20 15:51:45 +03:00
52c3ebf631
Fuzzing tests for SSZ
2020-05-20 15:51:45 +03:00
383b22795c
bump submodules ( #1043 )
2020-05-20 06:57:39 +02:00
6c941b1ff7
spec v0.11.3 update
2020-05-19 17:16:55 +00:00
a99977b772
Progress towards #991 ; Enable the distinct ssz.List type
2020-05-19 15:53:03 +03:00
8432932c11
update to spec v0.11.2 to keep compatible with Schlesi ( #1036 )
...
* update to spec v0.11.2 to keep compatible with Schlesi
* update spec/state_transition_epoch spec references to v0.11.2
* bump other spec refs
2020-05-18 23:05:27 +00:00
398166369b
bump libp2p to latest master
2020-05-18 21:51:03 +00:00
6be7d64e8c
bump libp2p ( #1031 )
2020-05-18 10:11:21 +02:00
c232fd0b3d
bump vendor/nimbus-build-system
2020-05-15 14:27:21 +02:00
6c9e2d98a8
bump libp2p
2020-05-14 16:41:19 +03:00
a605c7244e
simplify libp2p snappy
...
* handle a few more exceptions gracefully (in libp2p also)
* unify libp2p varint parsing
* decompress directly into seq
* avoid seq slice
* stop oversized snappy processing earlier (lowers risk)
2020-05-14 16:41:19 +03:00
926d1c546e
updated news, also no longer allowing event handlers to raise anything other than a Defect in the Web3 API
2020-05-14 14:10:26 +03:00
e537ed94d6
Bump some modules
2020-05-13 12:19:58 +03:00
75c1c6a95c
Enable Snappy by default (using LibP2P steams for now)
...
This refactors the newly added Snappy streaming back-ends trying to
make them more similar and to reduce the code duplication to a minimum.
2020-05-13 12:18:42 +03:00
f055fad08a
Make the Snappy FastStreams integration optional by duplicating it for LibP2P streams
2020-05-13 12:18:42 +03:00
7e846a0bce
Implement sszSize
2020-05-13 12:18:42 +03:00
dbe0010504
Bump nim-snappy
2020-05-13 12:18:42 +03:00
15f0153441
Cosmetic improvements
2020-05-13 12:18:42 +03:00
9538b60704
Integrate the async Snappy implementation
2020-05-13 12:18:42 +03:00
a739d7e8d6
Adapt SSZ to the latest FastStreams API
2020-05-13 12:18:42 +03:00
0d1a602cf5
bump libp2p
2020-05-11 21:06:58 +02:00
2d78523423
fix Grafana dashboards ( #1006 )
...
* fix Grafana dashboards
and refactor a couple of scripts
* start.sh: allow running standalone script
2020-05-11 18:35:53 +00:00
fb2e0ddbec
sync fixes ( #1005 )
...
* sync fixes
* fix Status message finalized info
* work around sync starting before initial status exchange
* don't fail block on deposit signature check failure (fixes #989 )
* print ForkDigest and Version nicely
* dump incoming blocks
* fix crash when libp2p peer connection is closed
* update chunk size to 16 to work around missing blocks when syncing
* bump libp2p
* bump libp2p
* better deposit skip message
2020-05-11 18:08:52 +00:00
a7a50824a1
more metrics ( #1004 )
2020-05-11 06:25:49 +00:00
592d6f65c3
bump ( #1001 )
2020-05-09 16:47:14 +02:00
c572f61129
bump vendor/nim-metrics
2020-05-09 01:13:57 +02:00
fc9d6bc1b3
enable SO_REUSEADDR in libp2p transports
2020-05-08 21:50:20 +02:00
3ffd0d7216
Fix gossip messages not delivered. ( #983 )
2020-05-06 15:42:59 +00:00
e65f5c86da
vendor: bump ( #954 )
2020-04-30 18:27:04 +02:00
667bdf066a
Bump Chronicles to fix a minor bug; Add a placeholder for disabled topics
2020-04-28 13:49:30 +03:00
7237a370ba
Implement https://github.com/status-im/nim-beacon-chain/issues/872
...
Please see the newly added 'schlesi-dev' Makefile target.
It demonstrates how the log level can be specified for individual topics.
Additionally, when connecting to testnets like 'schlesi' there will be
two additional log files produced in the working directory:
* json-log.txt
* text-log.txt (in the textblocks format)
2020-04-28 13:49:30 +03:00
898df9ba45
kvstore: port to nim-eth ( #938 )
2020-04-27 18:36:28 +02:00
740b76d152
Spec-compliant implementation of Eth1 monitoring; Eth1-enabled local sim
...
BEWARE! This commit will trigger a stack overflow during local sim
2020-04-26 13:04:53 +03:00
fe30b24aba
bump ( #929 )
2020-04-24 11:47:51 +02:00
0079242457
again exported the right overloads for serializing hashes properly to json (and not as byte arrays) and updating nim-eth
2020-04-23 20:46:13 +03:00
6729d3c032
kvstore: fix raising, be harsher on database errors ( #923 )
...
* kvstore: fix raising, be harsher on database errors
* bump stew/serialization
2020-04-23 08:27:35 +02:00
ae9ca33aca
Disable the faststreams destructors
2020-04-22 21:33:04 +03:00
ed74770451
spec: regulate exceptions ( #913 )
...
* spec: regulate exceptions
* a few more simple raises
2020-04-22 07:53:02 +02:00
2f74951c04
bump submodules ( #912 )
2020-04-21 16:54:32 +02:00
b441a373db
Bump libp2p submodule
2020-04-21 10:46:21 +09:00
1babc00255
new initial submodule update strategy ( #904 )
...
* new initial submodule update strategy
* Azure: fix command order
2020-04-19 01:25:21 +02:00
8b6c51e78d
secp: convenience api ( #897 )
2020-04-17 15:29:49 +02:00
6975869ad6
bump submodules ( #899 )
2020-04-17 01:04:46 +02:00
e7259ce7ec
Bump faststreams
2020-04-17 00:23:11 +03:00
a4830976ab
hotfix: fix the selecting of the syncing protocol handlers
2020-04-16 15:01:19 +03:00
Jacek Sieka
Ștefan Talpalaru
nbc-bump-bot[bot]
Zahary Karadjov
Dmitriy Ryajov
tersec
Kim De Mey
Eugene Kabanov
Viktor Kirilov
李婷婷
Mamy André-Ratsimbazafy
Giovanni Petrantoni