We already updated the field order in the actual `ExecutionPayload`,
but in init code and tests / logs etc we still used the old order.
Update those occurrences to also match the field order in the struct.
Furthermore, add `excess_data_gas` to last entry in `test_eth1_monitor`.
The `SAFE_SLOTS_TO_UPDATE_JUSTIFIED` constant is no longer used as the
bouncing attack fix was removed:
https://github.com/ethereum/consensus-specs/pull/3290
Note: Some test networks still define the constant, ignoring the config
constant for now until it is no longer used.
Post-Capella, historical roots are computed from historical summaries
instead of being directly stored in the beacon state.
Slightly messy to pass both lists around - this is done to avoid
computing the historical root unnecessarily.
Just the variable, not yet `lcDataForkAtStateFork` / `atStateFork`.
- Shorten comment in `light_client.nim` to keep line width
- Do not rename `stateFork` mention in `runProposalForkchoiceUpdated`.
- Do not rename `stateFork` in `getStateField(dag.headState, fork)`
Rest is just a mechanical mass replace
* Support for driving multiple EL nodes from a single Nimbus BN
Full list of changes:
* Eth1Monitor has been renamed to ELManager to match its current
responsibilities better.
* The ELManager is no longer optional in the code (it won't have
a nil value under any circumstances).
* The support for subscribing for headers was removed as it only
worked with WebSockets and contributed significant complexity
while bringing only a very minor advantage.
* The `--web3-url` parameter has been deprecated in favor of a
new `--el` parameter. The new parameter has a reasonable default
value and supports specifying a different JWT for each connection.
Each connection can also be configured with a different set of
responsibilities (e.g. download deposits, validate blocks and/or
produce blocks). On the command-line, these properties can be
configured through URL properties stored in the #anchor part of
the URL. In TOML files, they come with a very natural syntax
(althrough the URL scheme is also supported).
* The previously scattered EL-related state and logic is now moved
to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim`
in a follow-up commit). State is assigned properly either to the
`ELManager` or the to individual `ELConnection` objects where
appropriate.
The ELManager executes all Engine API requests against all attached
EL nodes, in parallel. It compares their results and if there is a
disagreement regarding the validity of a certain payload, this is
detected and the beacon node is protected from publishing a block
with a potential execution layer consensus bug in it.
The BN provides metrics per EL node for the number of successful or
failed requests for each type Engine API requests. If an EL node
goes offline and connectivity is resoted later, we report the
problem and the remedy in edge-triggered fashion.
* More progress towards implementing Deneb block production in the VC
and comparing the value of blocks produced by the EL and the builder
API.
* Adds a Makefile target for the zhejiang testnet
* Local sim impovements
* Added support for running Capella and EIP-4844 simulations
by downloading the correct version of Geth.
* Added support for using Nimbus remote signer and Web3Signer.
Use 2 out of 3 threshold signing configuration in the mainnet
configuration and regular remote signing in the minimal one.
* The local testnet simulation can now use a payload builder.
This is currently not activated in CI due to lack of automated
procedures for installing third-party relays or builders.
You are adviced to use mergemock for now, but for most realistic
results, we can create a simple builder based on the nimbus-eth1
codebase that will be able to propose transactions from the regular
network mempool.
* Start the simulation from a merged state. This would allow us
to start removing pre-merge functionality such as the gossip
subsciption logic. The commit also removes the merge-forcing
hack installed after the TTD removal.
* Consolidate all the tools used in the local simulation into a
single `ncli_testnet` binary.
Other changes:
Renamed the `EIP_4844_FORK_*` config constants to `DENEB_FORK_*` as
this matches the latest spec and it's already used in the official
Sepolia config.
In SSZ, `uint32` is used for offsets, effectively limiting the size of
an SSZ entry to 2**32 bytes.
Also, `uint48` isn't a valid SSZ type, so the header was not correctly
defined according to the SSZ spec - the extra 2 bytes are left for
future expansion instead.
* exit/validatorchange pool includes BLS to execution messages; REST
support for new pool
* catch failed individual futures
* increase BLS changes bound and keep BLS seen consistent with subpool
* deque capacities should be powers of 2
When a database has been pruned, we can still export the non-pruned part
- running the era exported together with pruning allows archiving the
full ethereum history for future reference without wasting space in the
database.
* use logging for reporting era write progress
* less noise when skipping existing files
* load blocks from era store also when working with `ncli_db`
* write to temporary file then rename when era is complete, to reduce
risk of corruption
* also avoids loading the in-progress era file when writing and
reading from the same era folder
Introduce (optional) pruning of historical data - a pruned node will
continue to answer queries for historical data up to
`MIN_EPOCHS_FOR_BLOCK_REQUESTS` epochs, or roughly 5 months, capping
typical database usage at around 60-70gb.
To enable pruning, add `--history=prune` to the command line - on the
first start, old data will be cleared (which may take a while) - after
that, data is pruned continuously.
When pruning an existing database, the database will not shrink -
instead, the freed space is recycled as the node continues to run - to
free up space, perform a trusted node sync with a fresh database.
When switching on archive mode in a pruned node, history is retained
from that point onwards.
History pruning is scheduled to be enabled by default in a future
release.
In this PR, `minimal` mode from #4419 is not implemented meaning
retention periods for states and blocks are always the same - depending
on user demand, a future PR may implement `minimal` as well.
* Types and scaffolding for EIP-4844
This commit adds the EIP-4844 spec types, and fills in
scaffolding/boilerplate for the use of these types across the repo.
None of the actual EIP-4844 logic is introduced yet.
This follows the pattern used by @tersec when introducing Capella (#4276).
* use eth2-networks fork
* review feedback: add static check EIP4844_FORK_EPOCH == FAR_FUTURE_EPOCH
* review feedback: remove EIP4844 from /eth/v1/config/spec response
* Cleanup / review feedback
* Fix REST test
Since the sync committee duties are no longer updated on every slot
and previously the sync committee aggregators selection proofs were
generated during the duties update, this now resulted in the client
using stale selection proofs (they must be generated at each slot).
The fix consists of moving the selection proof generation logic in
a different function which is properly executed on each slot.
Other changes:
* The logtrace tool has been enhanced with a framework for adding
new simpler log aggregation and analysis algorithms.
The default CI testnet simulation will now ensure that the blocks
in the network have reasonable sync committee participation.
* Allow chain dag without genesis / block
This PR enables the initialization of the dag without access to blocks
or genesis state - it is a prerequisite for implementing a number of
interesting features:
* checkpoint sync without any block download
* pruning of blocks and states
* backfill checkpoint block
The LC REST API has been merged into the ethereum/beacon-APIs specs:
- https://github.com/ethereum/beacon-APIs/pull/247
Update URLs to v1 and update REST tests. Note that REST tests do not
start with Altair, so the tested BN will return empty / error responses.
* Keymanager API for the validator client
* Properly treat the 'description' field as optional when loading Keystores
* Spec-compliant serialization of the slashing data in Keymanager's DeleteKeys response ()
Fixes#3940Fixes#3964Closes#3884 by adding test
Whether new blocks/attestations/etc are produced internally or received
via REST, their journey through the node is the same - to ensure that
they get the same treatment (logging, metrics, processing), this PR
moves the routing to a dedicated module and fixes several small
differences that existed before.
* `xxxValidator` -> `processMessageName` - the processor also was adding
messages to pools, so we want the name to reflect that action
* add missing "sent" metrics for some messages
* document ignore policy better - already-seen messages are not actaully
rebroadcast by libp2p
* skip redundant signature checks for internal validators consistently
* SSZ `[]` -> `mitem`
* `[]` -> `item`
immutable access via mutable instance cannot rely on template
overloading, and `[]` cannot be a `func` because of special seq handling
in compiler.
* document static vs dynamic range checking requirements
* add `vindices` iterator to iterate over valid validator indices in a
state
* clean up spec comments in general
* fixup
Co-authored-by: tersec <tersec@users.noreply.github.com>
Since we were not verifying BLS signature in blocks that we produce,
we were failing to notice that some deposits need to be ignored (due
to having an invalid signature). Processing these deposits resulted
in a different ending state after the state transition which caused
our blocks to be rejected by the network.
Other changes:
* logtrace can now verify sync committee messages and contributions
* Many unnecessary use of pairs() have been removed for consistency
* Map 40x BN response codes to BeaconNodeStatus.Incompatible in the VC
* era file verification
Implement and document era file verification
* era file states now come with block applied for easier verification
* clarify conflicting version handling
* document verification requirements
* remove count from name, use start-era, end-root to discover range
* remove obsolete todo
* abstract out block root loading
Updated outdated presets / configs / REST config to v1.1.10 specs.
- `TERMINAL_BLOCK_HASH_ACTIVATION_EPOCH` and `PROPOSER_SCORE_BOOST` are
not yet used in `eth2-networks`, added configurability as TODOs.
- `MIN_ANCHOR_POW_BLOCK_DIFFICULTY` is no longer needed, put on ignore
list as some Altair devnets still reference it.
This PR makes the necessary adjustments to deal with the revamped snappy
API.
In practical terms for nimbus-eth2, there are performance increases to
gossip processing, database reading and writing as well as era file
processing. Exporting `.era` files for example, a snappy-heavy
operation, almost halves in total processing time:
Pre:
```
Average, StdDev, Min, Max, Samples, Test
39.088, 8.735, 23.619, 53.301, 50, tState
237.079, 46.692, 165.620, 355.481, 49, tBlocks
```
Post:
```
All time are ms
Average, StdDev, Min, Max, Samples, Test
25.350, 5.303, 15.351, 41.856, 50, tState
141.238, 24.164, 99.990, 199.329, 49, tBlocks
```
Some upstream repos still need fixes, but this gets us close enough that
style hints can be enabled by default.
In general, "canonical" spellings are preferred even if they violate
nep-1 - this applies in particular to spec-related stuff like
`genesis_validators_root` which appears throughout the codebase.
`.era` files and Req/Resp protocols use framed formats - aligning the
database with these makes for less recompression work overall as gossip
is sent only once while req/resp repeats (potentially) - this also
allows efficient pruning-to-era where snappy-recompression is the major
cycle thief.
* harden validator API against pre-finalized slot requests
* check `syncHorizon` when responding to validator api requests too far
from `head`
* limit state-id based requests to one epoch ahead of `head`
* put historic data bounds on block/attestation/etc validator production API, preventing them from being used with already-finalized slots
* add validator block smoke tests
* make rest test create a new genesis with the tests running roughly in
the first epoch to allow testing a few more boundary conditions
* era: load blocks and states
Era files contain finalized history and can be thought of as an
alternative source for block and state data that allows clients to avoid
syncing this information from the P2P network - the P2P network is then
used to "top up" the client with the most recent data. They can be
freely shared in the community via whatever means (http, torrent, etc)
and serve as a permanent cold store of consensus data (and, after the
merge, execution data) for history buffs and bean counters alike.
This PR gently introduces support for loading blocks and states in two
cases: block requests from rest/p2p and frontfilling when doing
checkpoint sync.
The era files are used as a secondary source if the information is not
found in the database - compared to the database, there are a few key
differences:
* the database stores the block indexed by block root while the era file
indexes by slot - the former is used only in rest, while the latter is
used both by p2p and rest.
* when loading blocks from era files, the root is no longer trivially
available - if it is needed, it must either be computed (slow) or cached
(messy) - the good news is that for p2p requests, it is not needed
* in era files, "framed" snappy encoding is used while in the database
we store unframed snappy - for p2p2 requests, the latter requires
recompression while the former could avoid it
* front-filling is the process of using era files to replace backfilling
- in theory this front-filling could happen from any block and
front-fills with gaps could also be entertained, but our backfilling
algorithm cannot take advantage of this because there's no (simple) way
to tell it to "skip" a range.
* front-filling, as implemented, is a bit slow (10s to load mainnet): we
load the full BeaconState for every era to grab the roots of the blocks
- it would be better to partially load the state - as such, it would
also be good to be able to partially decompress snappy blobs
* lookups from REST via root are served by first looking up a block
summary in the database, then using the slot to load the block data from
the era file - however, there needs to be an option to create the
summary table from era files to fully support historical queries
To test this, `ncli_db` has an era file exporter: the files it creates
should be placed in an `era` folder next to `db` in the data directory.
What's interesting in particular about this setup is that `db` remains
as the source of truth for security purposes - it stores the latest
synced head root which in turn determines where a node "starts" its
consensus participation - the era directory however can be freely shared
between nodes / people without any (significant) security implications,
assuming the era files are consistent / not broken.
There's lots of future improvements to be had:
* we can drop the in-memory `BlockRef` index almost entirely - at this
point, resident memory usage of Nimbus should drop to a cool 500-600 mb
* we could serve era files via REST trivially: this would drop backfill
times to whatever time it takes to download the files - unlike the
current implementation that downloads block by block, downloading an era
at a time almost entirely cuts out request overhead
* we can "reasonably" recreate detailed state history from almost any
point in time, turning an O(slot) process into O(1) effectively - we'll
still need caches and indices to do this with sufficient efficiency for
the rest api, but at least it cuts the whole process down to minutes
instead of hours, for arbitrary points in time
* CI: ignore failures with Nim-1.6 (temporary)
* test fixes
Co-authored-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
Up til now, the block dag has been using `BlockRef`, a structure adapted
for a full DAG, to represent all of chain history. This is a correct and
simple design, but does not exploit the linearity of the chain once
parts of it finalize.
By pruning the in-memory `BlockRef` structure at finalization, we save,
at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory
landing us at a steady state of ~750mb normal memory usage for a
validating node.
Above all though, we prevent memory usage from growing proportionally
with the length of the chain, something that would not be sustainable
over time - instead, the steady state memory usage is roughly
determined by the validator set size which grows much more slowly. With
these changes, the core should remain sustainable memory-wise post-merge
all the way to withdrawals (when the validator set is expected to grow).
In-memory indices are still used for the "hot" unfinalized portion of
the chain - this ensure that consensus performance remains unchanged.
What changes is that for historical access, we use a db-based linear
slot index which is cache-and-disk-friendly, keeping the cost for
accessing historical data at a similar level as before, achieving the
savings at no percievable cost to functionality or performance.
A nice collateral benefit is the almost-instant startup since we no
longer load any large indicies at dag init.
The cost of this functionality instead can be found in the complexity of
having to deal with two ways of traversing the chain - by `BlockRef` and
by slot.
* use `BlockId` instead of `BlockRef` where finalized / historical data
may be required
* simplify clearance pre-advancement
* remove dag.finalizedBlocks (~50:ish mb)
* remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead
* `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef`
instance, unlike `BlockRef` traversal
* prune `BlockRef` parents on finality (~200:ish mb)
* speed up ChainDAG init by not loading finalized history index
* mess up light client server error handling - this need revisiting :)
One more step on the journey to reduce `BlockRef` usage across the
codebase - this one gets rid of `StateData` whose job was to keep track
of which block was last assigned to a state - these duties have now been
taken over by `latest_block_root`, a fairly recent addition that
computes this block root from state data (at a small cost that should be
insignificant)
99% mechanical change.
To calculate the deltas correctly, the `process_inactivity_updates` function
must be called before the rewards and penalties processing code in order to
update the `inactivity_scores` field in the state. This would have required
duplicating more logic from the spec in the ncli modules, so I've decided to
pay the price of introducing a run-time copy of the state at each epoch which
eliminates the need to duplicate logic (both for this fix and the previous one).
Other changes:
* Fixes for the read-only mode of the `BeaconChainDb`
* Fix an uint64 underflow in the debug output procedure for printing
balance deltas
* Allow Bellatrix states in the reward computation helpers
Streamline lookup with Forky and BeaconBlockFork (then we can do the
same for era)
We use type to avoid conditionals, as fork is often already known at a
"higher" level.
* load blockid before loading block by root - this is needed to map root
to slot and will eventually be done via block summary table for "old"
blocks
Co-authored-by: tersec <tersec@users.noreply.github.com>
Update several `ncli_db` commands to run in readOnly mode, allowing them
to be used with a running instance - in particular era export.
* export all eras by default
* skip already-exported eras
Notable improvements:
* A separate aggregation pass is no longer required.
* The user can opt to produce only aggregated data
(resuing in a much smaller data set).
* Large portion of the number cruching in Jupyter is now done in C
through the rich DataFrames API.
* Added support for comparisons against the "median" validator
performance in the network.
* limit by-root requests to non-finalized blocks
Presently, we keep a mapping from block root to `BlockRef` in memory -
this has simplified reasoning about the dag, but is not sustainable with
the chain growing.
We can distinguish between two cases where by-root access is useful:
* unfinalized blocks - this is where the beacon chain is operating
generally, by validating incoming data as interesting for future fork
choice decisions - bounded by the length of the unfinalized period
* finalized blocks - historical access in the REST API etc - no bounds,
really
In this PR, we limit the by-root block index to the first use case:
finalized chain data can more efficiently be addressed by slot number.
Future work includes:
* limiting the `BlockRef` horizon in general - each instance is 40
bytes+overhead which adds up - this needs further refactoring to deal
with the tail vs state problem
* persisting the finalized slot-to-hash index - this one also keeps
growing unbounded (albeit slowly)
Anyway, this PR easily shaves ~128mb of memory usage at the time of
writing.
* No longer honor `BeaconBlocksByRoot` requests outside of the
non-finalized period - previously, Nimbus would generously return any
block through this libp2p request - per the spec, finalized blocks
should be fetched via `BeaconBlocksByRange` instead.
* return `Opt[BlockRef]` instead of `nil` when blocks can't be found -
this becomes a lot more common now and thus deserves more attention
* `dag.blocks` -> `dag.forkBlocks` - this index only carries unfinalized
blocks from now - `finalizedBlocks` covers the other `BlockRef`
instances
* in backfill, verify that the last backfilled block leads back to
genesis, or panic
* add backfill timings to log
* fix missing check that `BlockRef` block can be fetched with
`getForkedBlock` reliably
* shortcut doppelganger check when feature is not enabled
* in REST/JSON-RPC, fetch blocks without involving `BlockRef`
* fix dag.blocks ref
The new format is based on compressed CSV files in two channels:
* Detailed per-epoch data
* Aggregated "daily" summaries
The use of append-only CSV file speeds up significantly the epoch
processing speed during data generation. The use of compression
results in smaller storage requirements overall. The use of the
aggregated files has a very minor cost in both CPU and storage,
but leads to near interactive speed for report generation.
Other changes:
- Implemented support for graceful shut downs to avoid corrupting
the saved files.
- Fixed a memory leak caused by lacking `StateCache` clean up on each
iteration.
- Addressed review comments
- Moved the rewards and penalties calculation code in a separate module
Required invasive changes to existing modules:
- The `data` field of the `KeyedBlockRef` type is made public to be used
by the validator rewards monitor's Chain DAG update procedure.
- The `getForkedBlock` procedure from the `blockchain_dag.nim` module
is made public to be used by the validator rewards monitor's Chain DAG
update procedure.
This is an alternative take on https://github.com/status-im/nimbus-eth2/pull/3107
that aims for more minimal interventions in the spec modules at the expense of
duplicating more of the spec logic in ncli_db.
Time in the beacon chain is expressed relative to the genesis time -
this PR creates a `beacon_time` module that collects helpers and
utilities for dealing the time units - the new module does not deal with
actual wall time (that's remains in `beacon_clock`).
Collecting the time related stuff in one place makes it easier to find,
avoids some circular imports and allows more easily identifying the code
actually needs wall time to operate.
* move genesis-time-related functionality into `spec/beacon_time`
* avoid using `chronos.Duration` for time differences - it does not
support negative values (such as when something happens earlier than it
should)
* saturate conversions between `FAR_FUTURE_XXX`, so as to avoid
overflows
* fix delay reporting in validator client so it uses the expected
deadline of the slot, not "closest wall slot"
* simplify looping over the slots of an epoch
* `compute_start_slot_at_epoch` -> `start_slot`
* `compute_epoch_at_slot` -> `epoch`
A follow-up PR will (likely) introduce saturating arithmetic for the
time units - this is merely code moves, renames and fixing of small
bugs.
* Harden CommitteeIndex, SubnetId, SyncSubcommitteeIndex
Harden the use of `CommitteeIndex` et al to prevent future issues by
using a distinct type, then validating before use in several cases -
datatypes in spec are kept simple though so that invalid data still can
be read.
* fix invalid epoch used in REST
`/eth/v1/beacon/states/{state_id}/committees` committee length (could
return invalid data)
* normalize some variable names
* normalize committee index loops
* fix `RestAttesterDuty` to use `uint64` for `validator_committee_index`
* validate `CommitteeIndex` on ingress in REST API
* update rest rules with stricter parsing
* better REST serializers
* save lots of memory by not using `zip` ...at least a few bytes!
* REST cleanups
* reject out-of-range committee requests
* print all hex values as lower-case
* allow requesting state information by head state root
* turn `DomainType` into array (follow spec)
* `uint_to_bytesXX` -> `uint_to_bytes` (follow spec)
* fix wrong dependent root in `/eth/v1/validator/duties/proposer/`
* update documentation - `--subscribe-all-subnets` is no longer needed
when using the REST interface with validator clients
* more fixes
* common helpers for dependent block
* remove test rules obsoleted by more strict epoch tests
* fix trailing commas
* Update docs/the_nimbus_book/src/rest-api.md
* Update docs/the_nimbus_book/src/rest-api.md
Co-authored-by: sacha <sacha@status.im>
Overhaul of era files, including documentation and reference
implementations
* store blocks, then state, then slot indices for easy lookup at low
cost
* document era file rationale
* altair+ support in era writer
* support downloading blocks / states via JSON in addition to SSZ -
slow, but needed for infura support - SSZ is still used when server
supports it
* use common forked block/state reader in REST API
* fix stack overflows in REST JSON decoder
* fix invalid serialization of `justification_bits` in
`/eth/v1/debug/beacon/states` and `/eth/v2/debug/beacon/states`
* fix REST client to use `/eth/...` instead of `/api/eth/...`, update
"default" urls to expose REST api via `/eth` as well as this is what the
standard says - `/api` was added early on based on an example "base url"
in the spec that has been removed since
* expose Nimbus REST extensions via `/nimbus` in addition to
`/api/nimbus` to stay consistent with `/eth`
* fix invalid state root when reading states via REST
* fix recursive imports in `spec/ssz_codec`
* remove usages of `serialization.useCustomSerialization` - fickle
With checkpoint sync in particular, and state pruning in the future,
loading states or state-dependent data may fail. This PR adjusts the
code to allow this to be handled gracefully.
In particular, the new availability assumption is that states are always
available for the finalized checkpoint and newer, but may fail for
anything older.
The `tail` remains the point where state loading de-facto fails, meaning
that between the tail and the finalized checkpoint, we can still get
historical data (but code should be prepared to handle this as an
error).
However, to harden the code against long replays, several operations
which are assumed to work only with non-final data (such as gossip
verification and validator duties) now limit their search horizon to
post-finalized data.
* harden several state-dependent operations by logging an error instead
of introducing a panic when state loading fails
* `withState` -> `withUpdatedState` to differentiate from the other
`withState`
* `updateStateData` can now fail if no state is found in database - it
is also hardened against excessively long replays
* `getEpochRef` can now fail when replay fails
* reject blocks with invalid target root - they would be ignored
previously
* fix recursion bug in `isProposed`
Introduced in #3171, it turns out we can just follow the block headers
to achieve the same effect
* leaves the constant in the code so as to avoid confusion when reading
database that had the constant written (such as the fleet nodes and
other unstable users)
Validator monitoring based on and mostly compatible with the
implementation in Lighthouse - tracks additional logs and metrics for
specified validators so as to stay on top on performance.
The implementation works more or less the following way:
* Validator pubkeys are singled out for monitoring - these can be
running on the node or not
* For every action that the validator takes, we record steps in the
process such as messages being seen on the network or published in the
API
* When the dust settles at the end of an epoch, we report the
information from one epoch before that, which coincides with the
balances being updated - this is a tradeoff between being correct
(waiting for finalization) and providing relevant information in a
timely manner)
Renames and cleanups split out from the validator monitoring branch, so
as to reduce conflict area vs other PR:s
* add constants for expected message timing
* name validators after the messages they validate, mostly, to make
grepping easier
* unify field naming of EpochInfo across forks to make cross-fork code
easier
* ncli_db: add putState, putBlock
These tools allow modifying an existing nimbus database for the purpose
of recovery or reorg, moving the head, tail and genesis to arbitrary
points.
* remove potentially expensive `putState` in `BeaconStateDB`
* introduce `latest_block_root` which computes the root of the latest
applied block from the `latest_block_header` field (instead of passing
it in separately)
* avoid some unnecessary BeaconState copies during init
* discover https://github.com/nim-lang/Nim/issues/19094
* prefer `HashedBeaconState` in a few places to avoid recomputing state
root
* fetch latest block root from state when creating blocks
* harden `get_beacon_proposer_index` against invalid slots and document
* move random spec function tests to `test_spec.nim`
* avoid unnecessary state root computation before block proposal
* Support starting from altair
* hide `finalized-checkpoint-` - they are incomplete and usage may cause
crashes
* remove genesis detection code (broken, obsolete)
* enable starting ChainDAG from altair checkpoints - this is a
prerequisite for checkpoint sync (TODO: backfill)
* tighten checkpoint state conditions
* show error when starting from checkpoint with existing database (not
supported)
* print rest-compatible JSON in ncli/state_sim
* altair/merge support in ncli
* more altair/merge support in ncli_db
* pre-load header to speed up loading
* fix forked block decoding
* fix stack overflow crash in REST/debug/getStateV2
* introduce `ForkyXxx` for generic type matching of `Xxx` across
branches (SomeHashedBeaconState -> ForkyHashedBeaconState et al) -
`Some` is already used for other types of type classes
* consolidate function naming in BeaconChainDB, use some generics
* import `forks.nim` from other spec modules and move `Forked*` helpers
around to resolve circular imports
* remove `ForkedBeaconState`, use `ForkedHashedBeaconState` throughout
(less data shuffling between the types)
* fix several cases of states being stored on stack in tests, causing
random failures on some platforms
* remove reading json support from ncli - this should be ported to the
rest json reading instead (doesn't currently work because stack sizes)
So far, the REST config response did not include all spec constants.
The spec for `/eth/v1/config/spec` defines that the response should
include constants for all hard forks known by the beacon node. This
patch extends the corresponding response to include more constants.
* Initial commit.
* Fix path.
* Add validator keys to indices cache mechanism.
Move syncComitteeParticipants to common place.
* Fix sync participants order issue.
* Fix error code when state could not be found.
Refactor `state/validators` to use keysToIndices mechanism.
* Fix RestValidatorIndex to ValidatorIndex conversion TODOs.
* Address review comments.
* Fix REST test rules.
Similar to the existing `RewardInfo`, this PR adds the infrastructure
needed to export epoch processing information from altair+. Because
accounting is done somewhat differently, the PR uses a fork-specific
object to extrct the information in order to make the cost on the spec
side low.
* RewardInfo -> EpochInfo, ForkedEpochInfo
* use array for computing new sync committee
* avoid repeated total active balance computations in block processing
* simplify proposer index check
* simplify epoch transition tests
* pre-compute base increment and reuse in epoch processing, and a few
other small optimizations
This PR introduces the type and does the heavy lifting in terms of
refactoring - the tools that use the accounting will need separate PR:s
(as well as refinements to the exportred information)
* reorganize ssz dependencies
This PR continues the work in
https://github.com/status-im/nimbus-eth2/pull/2646,
https://github.com/status-im/nimbus-eth2/pull/2779 as well as past
issues with serialization and type, to disentangle SSZ from eth2 and at
the same time simplify imports and exports with a structured approach.
The principal idea here is that when a library wants to introduce SSZ
support, they do so via 3 files:
* `ssz_codecs` which imports and reexports `codecs` - this covers the
basic byte conversions and ensures no overloads get lost
* `xxx_merkleization` imports and exports `merkleization` to specialize
and get access to `hash_tree_root` and friends
* `xxx_ssz_serialization` imports and exports `ssz_serialization` to
specialize ssz for a specific library
Those that need to interact with SSZ always import the `xxx_` versions
of the modules and never `ssz` itself so as to keep imports simple and
safe.
This is similar to how the REST / JSON-RPC serializers are structured in
that someone wanting to serialize spec types to REST-JSON will import
`eth2_rest_serialization` and nothing else.
* split up ssz into a core library that is independendent of eth2 types
* rename `bytes_reader` to `codec` to highlight that it contains coding
and decoding of bytes and native ssz types
* remove tricky List init overload that causes compile issues
* get rid of top-level ssz import
* reenable merkleization tests
* move some "standard" json serializers to spec
* remove `ValidatorIndex` serialization for now
* remove test_ssz_merkleization
* add tests for over/underlong byte sequences
* fix broken seq[byte] test - seq[byte] is not an SSZ type
There are a few things this PR doesn't solve:
* like #2646 this PR is weak on how to handle root and other
dontSerialize fields that "sometimes" should be computed - the same
problem appears in REST / JSON-RPC etc
* Fix a build problem on macOS
* Another way to fix the macOS builds
Co-authored-by: Zahary Karadjov <zahary@gmail.com>
The spec imports are a mess to work with, so this branch cleans them up
a bit to ensure that we avoid generic sandwitches and that importing
stuff generally becomes easier.
* reexport crypto/digest/presets because these are part of the public
symbol set of the rest of the spec types
* don't export `merge` types from `base` - this causes circular deps
* fix circular deps in `ssz/spec_types` - this is the first step in
disentangling ssz from spec
* be explicit about phase0 vs altair - longer term, `altair` will become
the "natural" type set, then merge and so on, so no point in giving
`phase0` special preferential treatment
Simpler module name for stuff that covers forks
* check that runtime config matches database state
* also include some assorted altair cleanups
* use "standard" genesis fork in local testnet to work around missing
runtime config support
* add aggregated attestation tracing to logtrace and enable it in Jenkins CI
* use a slightly less cryptic acronym than aasr
* mostly, nimbus and the eth2 spec use aggregate attestation, not aggregated attestation
* Implement split preset/config support
This is the initial bulk refactor to introduce runtime config values in
a number of places, somewhat replacing the existing mechanism of loading
network metadata.
It still needs more work, this is the initial refactor that introduces
runtime configuration in some of the places that need it.
The PR changes the way presets and constants work, to match the spec. In
particular, a "preset" now refers to the compile-time configuration
while a "cfg" or "RuntimeConfig" is the dynamic part.
A single binary can support either mainnet or minimal, but not both.
Support for other presets has been removed completely (can be readded,
in case there's need).
There's a number of outstanding tasks:
* `SECONDS_PER_SLOT` still needs fixing
* loading custom runtime configs needs redoing
* checking constants against YAML file
* yeerongpilly support
`build/nimbus_beacon_node --network=yeerongpilly --discv5:no --log-level=DEBUG`
* load fork epoch from config
* fix fork digest sent in status
* nicer error string for request failures
* fix tools
* one more
* fixup
* fixup
* fixup
* use "standard" network definition folder in local testnet
Files are loaded from their standard locations, including genesis etc,
to conform to the format used in the `eth2-networks` repo.
* fix launch scripts, allow unknown config values
* fix base config of rest test
* cleanups
* bundle mainnet config using common loader
* fix spec links and names
* only include supported preset in binary
* drop yeerongpilly, add altair-devnet-0, support boot_enr.yaml
* add Altair support to the block quarantine
* switch some spec/datatypes imports to spec/datatypes/base
* add Altair support to block_clearance
* allow runtime configuration of Altair transition slot
* enable Altair in block_sim, including in CI
Etan Kissling
Jacek Sieka
tersec
Zahary Karadjov
Eugene Kabanov
dependabot[bot]
henridf
Miran
zah