* Initial commit with both methods enabled: `poll` and `event`.
* Address review comments.
* Address review comments.
Fix copyright years.
* After bump fixes.
* handle one of the `ProveField` warnings
When assigning between `ForkyHashedBeaconState`, suppress `ProveField`
warning, as `tgt.kind == src.kind` was already checked, but compiler
doesn't understand that (as we only `case tgt.kind`).
* Update beacon_chain/spec/forks.nim
* Update beacon_chain/spec/forks.nim
`SyncCommitteeMsgPool` grouped messages by their `beacon_block_root`.
This is problematic around sync committee period boundaries and forks.
Around sync committee period boundaries, members from both the current
and next sync committee may sign the same `beacon_block_root`; mixing
the signatures from both committees together is a mistake. Likewise,
around fork transitions, the `signing_root` changes, so those messages
also need to be segregated.
When an uncached `ShufflingRef` is requested, we currently replay state
which can take several seconds. Acceleration is possible by:
1. Start from any state with locked-in `get_active_validator_indices`.
Any blocks / slots applied to such a state can only affect that
result for future epochs, so are viable for querying target epoch.
`compute_activation_exit_epoch(state.slot.epoch) > target.epoch`
2. Determine highest common ancestor among `state` and `target.blck`.
At the ancestor slot, same rules re `get_active_validator_indices`.
`compute_activation_exit_epoch(ancestorSlot.epoch) > target.epoch`
3. We now have a `state` that shares history with `target.blck` up
through a common ancestor slot. Any blocks / slots that the `state`
contains, which are not part of the `target.blck` history, affect
`get_active_validator_indices` at epochs _after_ `target.epoch`.
4. Select `state.randao_mixes[N]` that is closest to common ancestor.
Either direction is fine (above / below ancestor).
5. From that RANDAO mix, mix in / out all RANDAO reveals from blocks
in-between. This is just an XOR operation, so fully reversible.
`mix = mix xor SHA256(blck.message.body.randao_reveal)`
6. Compute the attester dependent slot from `target.epoch`.
`if epoch >= 2: (target.epoch - 1).start_slot - 1 else: GENESIS_SLOT`
7. Trace back from `target.blck` to the attester dependent slot.
We now have the destination for which we want to obtain RANDAO.
8. Mix in all RANDAO reveals from blocks up through the `dependentBlck`.
Same method, no special handling necessary for epoch transitions.
9. Combine `get_active_validator_indices` from `state` at `target.epoch`
with the recovered RANDAO value at `dependentBlck` to obtain the
requested shuffling, and construct the `ShufflingRef` without replay.
* more tests and simplify logic
* test with different number of deposits per branch
* Update beacon_chain/consensus_object_pools/blockchain_dag.nim
Co-authored-by: Jacek Sieka <jacek@status.im>
* `commonAncestor` tests
* lint
---------
Co-authored-by: Jacek Sieka <jacek@status.im>
* fix SSZ response for `produceBlindedBlock`
In `produceBlindedBlock`, we sent the `ForkedBlindedBeaconBlock` when
requested to reply in SSZ format. However, expected result is just the
inner `ForkyBlindedBeaconBlock` together with `eth-consensus-version`.
Note: We do not use SSZ format in our VC for this endpoint at this time,
which explains why we haven't noticed earlier.
* fix Altair/Phase0
* final portion of non-trivial v1.3.0 bumps
Updates unchanged logic to latest v1.3.0 consensus-specs refs,
and cleans up surrounding sections / syncs comments, and so on.
```
https://github.com/ethereum/consensus-specs/(blob|tree)/(?!v1\.3\.0/)
```
* lint
* linebreak
* cleanup `state_transition_epoch` and bump to v1.3.0
More v1.3.0 consensus-specs bumps, focused on `state_transition_epoch`.
Also fixed `current_epoch` spurious style check warning, and cleanup.
* Update beacon_chain/spec/state_transition_epoch.nim
Make intent clearer about when to expect `bls_to_execution_changes`,
and replace test-time errors with compile-time errors if the field
is renamed or goes away in the future.
We already updated the field order in the actual `ExecutionPayload`,
but in init code and tests / logs etc we still used the old order.
Update those occurrences to also match the field order in the struct.
Furthermore, add `excess_data_gas` to last entry in `test_eth1_monitor`.
The `SAFE_SLOTS_TO_UPDATE_JUSTIFIED` constant is no longer used as the
bouncing attack fix was removed:
https://github.com/ethereum/consensus-specs/pull/3290
Note: Some test networks still define the constant, ignoring the config
constant for now until it is no longer used.
Only comment changes:
- Bump refs to final v1.3.0 spec
- Align documentation style in various `BeaconState` structures
- Add `justification_bits` / `historical_roots` comment from spec
- Remove `previous_justified_checkpoint` from non-phase0 (same as spec)
- Cleanup some `Modified` tags
Add compatibility with https://github.com/ethereum/beacon-APIs/pull/290
to the beacon node. Behaviour when configured with multiple ELs is not
specified; intention suggests to indicate whether all ELs are offline.
Post-Capella, historical roots are computed from historical summaries
instead of being directly stored in the beacon state.
Slightly messy to pass both lists around - this is done to avoid
computing the historical root unnecessarily.
* low attestations during epoch should instafail in CI; dbg -> warn level on newPayload log
* improve newPayload warning message when no valid EL connected
* reduce potential spam; make log spelling more consistent; use fatal/quit
* allow trusted node sync based on LC trusted block root
Extends `trustedNodeSync` with a new `--trusted-block-root` option that
allows initializing a light client. No `--state-id` must be provided.
The beacon node will then use this light client to obtain the latest
finalized state from the remote server in a trust-minimized fashion.
Note that the provided `--trusted-block-root` should be somewhat recent,
and that security precautions such as comparing the state root against
block explorers is still recommended.
* fix
* workaround for `valueOr` limitations
* reduce magic numbers
* digest len > context len for readability
* move `cstring` conversion to caller
* avoid abbreviations
* `return` codestyle
* add `formatIt` for `ForkedLightClientXyz`
Even though the `ForkyLightClientXyz` have `formatIt`, they do not apply
when logging `ForkedLightClientXyz`, leading to large logs at times.
Defining `formatIt` for `ForkedLightClientXyz` fixes this.
* exports not needed
Two fixes to `/eth/v1/debug/fork_choice`:
- `validity` enum is expected to be serialized as string instead of int
- `data` wrapper is not expected for this endpoint
* Refactor nimbus_signing_node to support Unix signals.
* Fix SN unable to close REST server properly.
* Fix `keys`, `deposit` and `validator_registration` endpoints issues.
Add getValidatorExitSignature() and getDepositMessageSignature() to validator_pool.
* Add /reload endpoint and implementation.
Fix signData to not cancel `timer`.
Fix validator_pool should clear attachedValidators table.
* Diva protocol enhancement implementation.
Just the variable, not yet `lcDataForkAtStateFork` / `atStateFork`.
- Shorten comment in `light_client.nim` to keep line width
- Do not rename `stateFork` mention in `runProposalForkchoiceUpdated`.
- Do not rename `stateFork` in `getStateField(dag.headState, fork)`
Rest is just a mechanical mass replace
* Support for driving multiple EL nodes from a single Nimbus BN
Full list of changes:
* Eth1Monitor has been renamed to ELManager to match its current
responsibilities better.
* The ELManager is no longer optional in the code (it won't have
a nil value under any circumstances).
* The support for subscribing for headers was removed as it only
worked with WebSockets and contributed significant complexity
while bringing only a very minor advantage.
* The `--web3-url` parameter has been deprecated in favor of a
new `--el` parameter. The new parameter has a reasonable default
value and supports specifying a different JWT for each connection.
Each connection can also be configured with a different set of
responsibilities (e.g. download deposits, validate blocks and/or
produce blocks). On the command-line, these properties can be
configured through URL properties stored in the #anchor part of
the URL. In TOML files, they come with a very natural syntax
(althrough the URL scheme is also supported).
* The previously scattered EL-related state and logic is now moved
to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim`
in a follow-up commit). State is assigned properly either to the
`ELManager` or the to individual `ELConnection` objects where
appropriate.
The ELManager executes all Engine API requests against all attached
EL nodes, in parallel. It compares their results and if there is a
disagreement regarding the validity of a certain payload, this is
detected and the beacon node is protected from publishing a block
with a potential execution layer consensus bug in it.
The BN provides metrics per EL node for the number of successful or
failed requests for each type Engine API requests. If an EL node
goes offline and connectivity is resoted later, we report the
problem and the remedy in edge-triggered fashion.
* More progress towards implementing Deneb block production in the VC
and comparing the value of blocks produced by the EL and the builder
API.
* Adds a Makefile target for the zhejiang testnet
tersec
Eugene Kabanov
henridf
Etan Kissling
Zahary Karadjov
Jacek Sieka