d5e3712609
log errors in more detail when block production fails ( #2135 )
...
* log errors in more detail when block production fails
* pass through block header error
* make everything cstring
2020-12-02 13:23:10 +01:00
94c66f15a9
Wanted peers log message fix ( #2114 )
...
* Edit Peer count low wanted peers log
* remove prometheus folder
* remove prometheus.yml
* Add current peers to low peer count log
* change to 25% peer count notice, 12.5% warning
Co-authored-by: kdeme <kim.demey@gmail.com>
2020-12-02 10:47:23 +01:00
92655f936a
Add backoff for the deposit logs requests as well; More debug logs
2020-12-02 01:43:54 +02:00
7225a6d6ed
Retry all web3 requests up to 3 times with exponential backoff
2020-12-02 01:43:54 +02:00
f3b8c777a7
Strip whitespace.
2020-12-02 01:43:36 +02:00
4feb0a308e
Fix #2125 (ETH status bar display); Bump LibP2P
2020-12-02 00:03:59 +02:00
3e4b49462b
detect excessively long graffiti strings
2020-12-01 15:39:46 +02:00
68c91d1d1b
don't wait until after the first slot to enable gossip
2020-12-01 15:39:03 +02:00
2fd71a9aac
Reduce the rate of requesting deposits to lower the risk of triggering the Infura rate limits
2020-12-01 15:38:50 +02:00
4eaf29875a
Less risk for Eth1-induced delays in block proposal
2020-12-01 15:38:50 +02:00
38f7558e50
Work around a strange codegen issue to fix local sim in CI; Bump LibP2P
2020-12-01 15:38:00 +02:00
3bdda3dd46
Hotfix: use the mainnet bootstrap nodes without specifying --network=mainnet explicitly
2020-12-01 10:44:30 +02:00
4328576e18
Hotfix: 'deposits import' was ignoring its arguments in Linux builds
2020-12-01 00:59:57 +02:00
8327240458
v1.0.0-stateofus
2020-11-29 23:50:13 +02:00
ac9bdde543
Don't rely on a metric value for the ETH display in the status bar
2020-11-29 23:35:39 +02:00
cabb07a186
Apply suggestions from code review
...
Co-authored-by: Sacha Saint-Leger <sacha@status.im>
2020-11-29 23:08:07 +02:00
3c0dfc2fbe
Implement the 'deposits exit' command; Remove 'deposits create'
2020-11-29 23:08:07 +02:00
a2364ce1bc
add getGossipSubPeers RPC ( #2107 )
2020-11-29 20:07:20 +01:00
ae19ab72c0
Implement #2067
2020-11-29 18:27:26 +02:00
c3bfe15a35
increase default max peers ( #2106 )
...
* increase default max peers
also avoid reconnection when opening stream as this might induce
a loop
* Use dial without addresses
* dial back max peers a little
2020-11-29 14:43:41 +01:00
7731109320
Remove getSpecPreset() because of crash and add missing calls into api.md
2020-11-29 11:01:55 +02:00
bf2673abc4
Restore the ETH display in the status bar
2020-11-28 20:53:51 +02:00
8685eb7042
add validator balance metrics
2020-11-28 16:22:09 +02:00
db030eb944
Setup agent/proto version identifiers in libp2p. ( #2079 )
...
* Supply `nim-libp2p` with `agent-string` and `proto-string` as configured parameters.
* Remove protoString and rng check.
* Fix compilation problem.
2020-11-28 08:00:36 +01:00
e7f2735271
fix broken metrics during replay ( #2090 )
...
* move metrics out of state transition
* add validator count metric
* remove expensive beacon_current_validators, beacon_previous_validators
metrics (they should be reimplemented with cache), add cheap
beacon_active_validators to approximate
* remove unused validator count metrics
* tidy imports/defects
2020-11-27 23:16:13 +01:00
2421d338c1
node.network.metadata.attnets is only secondary source of truth ( #2089 )
2020-11-27 15:54:13 +01:00
d16e127daf
Peer stuff ( #2084 )
...
* Revert "Revert "Full "node" RPC calls implementation and fixes to peer lifetime states. (#2065 )" (#2082 )"
This reverts commit 7cc3dc8027
2020-11-26 20:23:45 +01:00
9b9aa93cd4
Seenttl by spec ( #2083 )
...
* add rpc call to get chronos futures at runtime
* add seenTTL gossip parameter
Co-authored-by: Jacek Sieka <jacek@status.im>
2020-11-26 13:08:22 +01:00
687cbaf94c
Adjust number of sync workers from 20 to 10. ( #2077 )
...
Adjust watch task min-pause-time to 1.minute.
Slowed down pause-time recovery by factor 3/4 instead of 1/2.
2020-11-26 09:19:27 +01:00
7cc3dc8027
Revert "Full "node" RPC calls implementation and fixes to peer lifetime states. ( #2065 )" ( #2082 )
...
This reverts commit d041287a4f
2020-11-26 09:05:23 +01:00
d041287a4f
Full "node" RPC calls implementation and fixes to peer lifetime states. ( #2065 )
...
* Initial commit.
* Fix log lines and compilation error.
* Add get_v1_node_peers() implementation.
* Fix peer's lifetime states.
* Use the most recent multiaddress.
* Fix assign NewPeerScore again.
Fix compilation error with last seen address.
Fix Peer upgraded log line place.
* syncing, health, peer_count, peer_id and fixes for identity.
* Fix compilation problems.
* Move object declaration to callsigs.
Fix identity addresses fields.
* Finish node RPC calls.
* Avoid leak of lifetime future.
* Bump chronos.
* Fix json generator problem.
2020-11-26 08:09:59 +01:00
e69b5ff473
Add a record create and print command
2020-11-25 18:32:59 +02:00
3a13750734
Try to obtain deposit contract address from config.
...
Attempt to fix json generation.
2020-11-25 18:30:44 +02:00
68f4ad64a4
Disable exception if depositAddress is not available.
2020-11-25 18:30:44 +02:00
af3862da48
Make depositAddress public in eth1_monitor.
...
Fix representation of config.
Add deposit_contract implementation.
2020-11-25 18:30:44 +02:00
8eafbb4e09
Add config_spec implementation.
2020-11-25 18:30:44 +02:00
3594fa2a22
Version 1.0.0-rc1
2020-11-25 03:13:58 +02:00
b9e4fef616
Check that the selected data dir is compatible with the selected network
2020-11-25 03:13:58 +02:00
e1e4871287
fix time formatting and pre-genesis ops
2020-11-25 01:51:46 +02:00
151d116f02
Fix off-by-one error in Eth1 pruning
2020-11-25 01:51:17 +02:00
a995cdd3d9
Bugfix: fix an incorrect balance increase during genesis state generation
2020-11-24 23:30:26 +02:00
594ef713a0
Increase the web3 timeouts
2020-11-24 23:28:20 +02:00
372c9b798c
Fix the corrupted database state on Pyrmont nodes; Add mainnet genesis ( #2056 )
...
* Handle some web3 timeouts better
* Add support for developer .env files
* Eth1 improvements; Mainnet genesis state
Notable changes:
* The deposits table have been removed from the database. The client
will no longer process all deposits on start-up.
* The network metadata now includes a "state snapshot" of the deposit
contract. This allows the client to skip syncing deposits made prior
to the snapshot (i.e. genesis). Suitable metadata added for Pyrmont
and Mainnet.
* The Eth1 monitor won't be started unless there are validators attached
to the node.
* The genesis detection code is now optional and disabled by default
* Bugfix: The client should not produce blocks that will fail validation
when it hasn't downloaded the latest deposits yet
* Bugfix: Work around the database corruption affecting Pyrmont nodes
* Remove metadata for Toledo and Medalla
2020-11-24 22:21:47 +01:00
040093a945
medalla -> pyrmont ( #2062 )
2020-11-23 17:46:51 +01:00
6f476ca380
Gossip11 params ( #2047 )
...
* add rpc call to get chronos futures at runtime
* add eth2 spec gossip parameters
* bump libp2p
* fix url, remove 1.0
Co-authored-by: Jacek Sieka <jacek@status.im>
2020-11-23 10:57:03 +01:00
672915e170
work around long pyrmont startup time ( #2060 )
...
* also fixes unnecessary copy/memory alloc when loading DbSeq entries
2020-11-21 18:53:40 +01:00
00aedddf2a
Version 0.6.6
2020-11-20 22:31:03 +02:00
dbcc0686ff
delay pruning of cache for finalized epoch ( fixes #2049 )
2020-11-20 20:57:50 +02:00
316a19af5f
Address review comments
2020-11-20 17:13:51 +02:00
d232f16b40
Add more eth1-related logging
2020-11-20 17:13:51 +02:00
tersec
Sacha Saint-Leger
Zahary Karadjov
cheatfate
Jacek Sieka
Giovanni Petrantoni
kdeme