* Fix durationToNextSlot() and durationToNextEpoch() to work not only after Genesis, but also before Genesis.
Change VC pre-genesis behavior, add runPreGenesisWaitingLoop() and runGenesisWaitingLoop().
Add checkedWaitForSlot() and checkedWaitForNextSlot() to strictly check current time and print warnings.
Fix VC main loop to use checkedWaitForNextSlot().
Fix attestation_service to run attestations processing only until the end of the duty slot.
Change attestation_service main loop to use checkedWaitForNextSlot().
Change block_service to properly cancel all the pending proposer tasks.
Use checkedWaitForSlot to wait for block proposal.
Fix block_service waitForBlockPublished() to be compatible with BN.
Fix sync_committee_service to avoid asyncSpawn.
Fix sync_committee_service to run only until the end of the duty slot.
Fix sync_committee_service to use checkedWaitForNextSlot().
* Refactor validator logging.
Fix aggregated attestation publishing missing delay.
* Fix doppelganger detection should not start at pre-genesis time.
Fix fallback service sync status spam.
Fix false `sync committee subnets subscription error`.
* Address review comments part 1.
* Address review comments.
* Fix condition issue for near genesis waiting loop.
* Address review comments.
* Address review comments 2.
* log validator that triggers doppelganger
* move activity detection closer to where it's performed, record
aggregation as activity (since it's part of the liveness endpoint)
* vc: check for doppelgangers in epoch 0 also (so that activity in epoch
1 can happen)
* avoid some looping when processing activities
* Initial commit.
* Address review comments and recommendations.
* Fix too often `Execution client not in sync` messages in logs.
* Add failure reason for duties requests.
* Add more reasons to every place of ValidatorApiError.
* Address race condition issue.
* Remove `vc` argument for getFailureReason().
We do a linear scan of all pubkeys for each validator and slot - this
becomes expensive with large validator counts.
* normalise BN/VC validator startup logging
* fix crash when host cannot be resolved while adding remote validator
* silence repeated log spam for unknown validators
* print pubkey/index/activation mapping on startup/validator
identification
* fix REST liveness endpoint responding even when gossip is not enabled
* fix VC exit code on doppelganger hit
* fix activation epoch not being updated correctly on long deposit
queues
* fix activation epoch being set incorrectly when updating validator
* move most implementation logic to `validator_pool`, add tests
* ensure consistent logging between VC and BN
* add docs
* Initial commit.
* NextAttestationEntry type.
* Add doppelgangerCheck and actual check.
* Recover deleted check.
* Remove NextAttestainEntry changes.
* More cleanups for NextAttestationEntry.
* Address review comments.
* Remove GENESIS_EPOCH specific check branch.
* Decrease number of full epochs for doppelganger check in VC.
Co-authored-by: zah <zahary@status.im>
* Fix doppelganger protection reorders validator indices in response issue.
* Add chronos metrics endpoint to nimbus REST API.
* Doppelganger protection now works on duties not on attestations.
Improve logging for doppelganger and indices.
* Improve doppelganger and indices logging.
* Add number of validators to logs.
* Move logging dumps from `debug` to `trace` level.
* Fixes a segfault during block production when the Keymanager API
is disabled. The Keymanager is now disabled on half of the local
testnet nodes to catch such problems in the future.
* Fixes multiple potential stalls from REST requests being done
without a timeout. From practice, we know that such requests
can hang forever if not cancelled with a timeout. At best,
this would be a resource leak, at worst, it may lead to a
full stall of the client and missed validator duties.
* Changes some Options usages to Opt (for easier use of valueOr)
* Keymanager API for the validator client
* Properly treat the 'description' field as optional when loading Keystores
* Spec-compliant serialization of the slashing data in Keymanager's DeleteKeys response ()
Fixes#3940Fixes#3964Closes#3884 by adding test
Other changes:
* logtrace can now verify sync committee messages and contributions
* Many unnecessary use of pairs() have been removed for consistency
* Map 40x BN response codes to BeaconNodeStatus.Incompatible in the VC
Other fixes:
* Fix bit rot in the `make prater-dev-deposit` target.
* Correct content-type in the responses of the Nimbus signing node
* Invalid JSON payload was being sent in the web3signer requests
Time in the beacon chain is expressed relative to the genesis time -
this PR creates a `beacon_time` module that collects helpers and
utilities for dealing the time units - the new module does not deal with
actual wall time (that's remains in `beacon_clock`).
Collecting the time related stuff in one place makes it easier to find,
avoids some circular imports and allows more easily identifying the code
actually needs wall time to operate.
* move genesis-time-related functionality into `spec/beacon_time`
* avoid using `chronos.Duration` for time differences - it does not
support negative values (such as when something happens earlier than it
should)
* saturate conversions between `FAR_FUTURE_XXX`, so as to avoid
overflows
* fix delay reporting in validator client so it uses the expected
deadline of the slot, not "closest wall slot"
* simplify looping over the slots of an epoch
* `compute_start_slot_at_epoch` -> `start_slot`
* `compute_epoch_at_slot` -> `epoch`
A follow-up PR will (likely) introduce saturating arithmetic for the
time units - this is merely code moves, renames and fixing of small
bugs.
* Logging and startup improvements
Color support for released binaries!
* startup scripts no longer log to file by default - this only affects
source builds - released binaries don't support file logging
* add --log-stdout option to control logging to stdout (colors, json)
* detect tty:s vs redirected logs and log accordingly
* add option to disable log colors at runtime
* simplify several "common" logs, showing the most important information
earlier and more clearly
* remove line numbers / file information / tid - these take up space and
are of little use to end users
* still enabled in debug builds and tools
* remove `testnet_servers_image` compile-time option
* server images, released binaries and compile-from-source now offer
the same behaviour and features
* fixes https://github.com/status-im/nimbus-eth2/issues/2326
* fixes https://github.com/status-im/nimbus-eth2/issues/1794
* remove instanteneous block speed from sync message, keeping only
average
before:
```
INF 2021-10-28 16:45:59.000+02:00 Slot start topics="beacnde" tid=386429 file=nimbus_beacon_node.nim:884 lastSlot=2384027 wallSlot=2384028 delay=461us84ns peers=0 head=75a10ee5:3348 headEpoch=104 finalized=cd6804ba:3264 finalizedEpoch=102 sync="wwwwwwwwww:0:0.0000:0.0000:00h00m (3348)"
INF 2021-10-28 16:45:59.046+02:00 Slot end topics="beacnde" tid=386429 file=nimbus_beacon_node.nim:821 slot=2384028 nextSlot=2384029 head=75a10ee5:3348 headEpoch=104 finalizedHead=cd6804ba:3264 finalizedEpoch=102 nextAttestationSlot=-1 nextProposalSlot=-1 nextActionWait=n/a
```
after:
```
INF 2021-10-28 22:43:23.033+02:00 Slot start topics="beacnde" slot=2385815 epoch=74556 sync="DDPDDPUDDD:10:5.2258:01h19m (2361088)" peers=37 head=eacd2dae:2361096 finalized=73782:a4751487 delay=33ms687us715ns
INF 2021-10-28 22:43:23.291+02:00 Slot end topics="beacnde" slot=2385815 nextActionWait=n/a nextAttestationSlot=-1 nextProposalSlot=-1 head=eacd2dae:2361096
```
* fix comment
* documentation updates
* mention `--log-file` may be deprecated in the future
* update various docs
This refactoring puts the JSON-RPC and REST APIs on more equal footing
by renaming and moving things around, creating a separation between
client and server, and documenting what they are - the aim is to have a
simple-to-use base to start from when developing API clients, as well as
make it easier to navigate the code when looking for the legacy JSON-RPC
interface vs the new REST API.
* move REST client, serialization and supporting types to spec/eth2_apis
* REST stuff now starts with `rest_`, JSON-RPC stuff starts with `rpc_`,
more or less
* simplify imports such that there's a simple module to import for both
server and client
* map REST type and proc names to yaml spec more closely - in
particular, reuse operation and type names in `rest_types` to make
comparisons against spec more easy
* cleaner separation between client and server modules - modules common
between server and client such as `rest_types` and serialization move to
the spec folder - this allows the client to be built with less knowledge
about server internals
* Fix firstSuccess() template missing timeouts.
* Fix validator race condition.
Fix logs to be compatible with beacon_node logs.
Add CatchableError handlers to avoid crashes.
Move some logs from Notice to Debug level.
Fix some [unused] warnings.
* Fix block proposal issue for slots in the past and from the future.
* Change sent to published.
* Address review comments #1.
* Initial commit.
* Exporting getConfig().
* Add beacon node checking procedures.
* Post rebase fixes.
* Use runSlotLoop() from nimbus_beacon_node.
Fallback implementation.
Fixes for ETH2 REST serialization.
* Add beacon_clock.durationToNextSlot().
Move type declarations from beacon_rest_api to json_rest_serialization.
Fix seq[ValidatorIndex] serialization.
Refactor ValidatorPool and add some utility procedures.
Create separate version of validator_client.
* Post-rebase fixes.
Remove CookedPubKey from validator_pool.nim.
* Now we should be able to produce attestations and aggregate and proofs.
But its not working yet.
* Debugging attestation sending.
* Add durationToNextAttestation.
Optimize some debug logs.
Fix aggregation_bits encoding.
Bump chronos/presto.
* Its alive.
* Fixes for launch_local_testnet script.
Bump chronos.
* Switch client API to not use `/api` prefix.
* Post-rebase adjustments.
* Fix endpoint for publishBlock().
* Add CONFIG_NAME.
Add more checks to ensure that beacon_node is compatible.
* Add beacon committee subscription support to validator_client.
* Fix stacktrace should be an array of strings.
Fix committee subscriptions should not be `data` keyed.
* Log duration to next block proposal.
* Fix beacon_node_status import.
* Use jsonMsgResponse() instead of jsonError().
* Fix graffityBytes usage.
Remove unnecessary `await`.
Adjust creation of SignedBlock instance.
Remove legacy files.
* Rework durationToNextSlot() and durationToNextEpoch() to use `fromNow`.
* Fix race condition for block proposal and attestations for same slot.
Fix local_testnet script to properly kill tasks on Windows.
Bump chronos and nim-http-tools, to allow connections to infura.io (basic auth).
* Catch services errors.
Improve performance of local_testnet.sh script on Windows.
Fix race condition when attestation producing.
* Post-rebase fixes.
* Bump chronos and presto.
* Calculate block publishing delay.
Fix pkill in one more place.
* Add error handling and timeouts to firstSuccess() template.
Add onceToAll() template.
Add checkNodes() procedure.
Refactor firstSuccess() template.
Add error checking to api.nim calls.
* Deprecated usage onceToAll() for better stability.
Address comment and send attestations asap.
* Avoid unnecessary loop when calculating minimal duration.
* add blockchain_dag altair database reading; add rollback tests; fix some unnecessary type conversions
* remove debugging scaffolding
* proposeSignedBlock() will need to be async for merge; introduce altair types to VC
Currently, we have a bit of a convoluted flow where when sending
attestations, we start broadcasting them over gossip then pass them to
the attestation validation to include them in the local attestation pool
- it should be the other way around: we should be checking attestations
_before_ gossipping them - this serves as an additional safety net to
ensure that we don't publish junk - this becomes more important when
publishing attestations from the API.
Also, the REST API was performing its own validation meaning
attestations coming from REST would be validated twice - finally, the
JSON RPC wasn't pre-validating and would happily broadcast invalid
attestations.
* Unified attestation production pipeline with the same flow for gossip,
locally and API-produced attestations: all are now validated and entered
into the pool, then broadcast/republished
* Refactor subnet handling with specific SubnetId alias, streamlining
where subnets are computed, avoiding the need to pass around the number
of active validators
* Move some of the subnet handling code to eth2_network
* Use BitArray throughout for subnet handling
This PR reduces the number of database queries for slashing protection
from 5 reads and 1 write to 2 reads and 1 write in the optimistic case.
In the process, it removes user-level support for writing the database
in the version 1 format in order to simplify the code flow, and prevent
code rot. In particular, the v1 format was not covered by any unit tests
and has no advantages over v2. The concrete code to read and write it
remains for now, in particular to support upgrades from v1 to v2.
The branch also removes the use of concepts which doesn't work with
checked exceptions - in particular, this highlights code that both
raises exceptions and returns error codes, which could be cleaned up in
the future.
* Cache internal validator ID
* Rely on unique index to check for trivial duplicate votes
* Combine two surround vote queries into one
* Combine API for checking and registering slashing into single function
The slashing DB is normally not a bottleneck, but may become one with
high attached validator counts.
* database state storage benchmarking via ncli_db
* more cleanups from immutable validator state branch
* unexport some eth2_network constants and remove unused variables/templates
* make two PeerScore constants public
* Create CLI tool for slashing export
* Use SQLite as a DB instead of a KV-store
* Keeps v1 and v2 DBs around
* Uses the same schema as Lighthouse v1.1.0
* Passes all interchange tests + skeleton of finalization pruning
* Removes tests that would violate v5 / minimal slashing DB and MinSlot rules
* Migration tool added using low-watermark scheme for faster migration of large number of validators
* expose node signatures
* format bitseqs as hex strings
* format trusted sigs as hex strings (same as untrusted)
* reuse rpc client sigs
* include validator index in duties
* move SyncInfo to spec
* performance fixes
* don't mark tree cache as dirty on read-only List accesses
* store only blob in memory for keys and signatures, parse blob lazily
* compare public keys by blob instead of parsing / converting to raw
* compare Eth2Digest using non-constant-time comparison
* avoid some unnecessary validator copying
This branch will in particular speed up deposit processing which has
been slowing down block replay.
Pre (mainnet, 1600 blocks):
```
All time are ms
Average, StdDev, Min, Max, Samples, Test
Validation is turned off meaning that no BLS operations are performed
3450.269, 0.000, 3450.269, 3450.269, 1, Initialize DB
0.417, 0.822, 0.036, 21.098, 1400, Load block from database
16.521, 0.000, 16.521, 16.521, 1, Load state from database
27.906, 50.846, 8.104, 1507.633, 1350, Apply block
52.617, 37.029, 20.640, 135.938, 50, Apply epoch block
```
Post:
```
3502.715, 0.000, 3502.715, 3502.715, 1, Initialize DB
0.080, 0.560, 0.035, 21.015, 1400, Load block from database
17.595, 0.000, 17.595, 17.595, 1, Load state from database
15.706, 11.028, 8.300, 107.537, 1350, Apply block
33.217, 12.622, 17.331, 60.580, 50, Apply epoch block
```
* more perf fixes
* load EpochRef cache into StateCache more aggressively
* point out security concern with public key cache
* reuse proposer index from state when processing block
* avoid genericAssign in a few more places
* don't parse key when signature is unparseable
* fix `==` overload for Eth2Digest
* preallocate validator list when getting active validators
* speed up proposer index calculation a little bit
* reuse cache when replaying blocks in ncli_db
* avoid a few more copying loops
```
Average, StdDev, Min, Max, Samples, Test
Validation is turned off meaning that no BLS operations are performed
3279.158, 0.000, 3279.158, 3279.158, 1, Initialize DB
0.072, 0.357, 0.035, 13.400, 1400, Load block from database
17.295, 0.000, 17.295, 17.295, 1, Load state from database
5.918, 9.896, 0.198, 98.028, 1350, Apply block
15.888, 10.951, 7.902, 39.535, 50, Apply epoch block
0.000, 0.000, 0.000, 0.000, 0, Database block store
```
* clear full balance cache before processing rewards and penalties
```
All time are ms
Average, StdDev, Min, Max, Samples, Test
Validation is turned off meaning that no BLS operations are performed
3947.901, 0.000, 3947.901, 3947.901, 1, Initialize DB
0.124, 0.506, 0.026, 202.370, 363345, Load block from database
97.614, 0.000, 97.614, 97.614, 1, Load state from database
0.186, 0.188, 0.012, 99.561, 357262, Advance slot, non-epoch
14.161, 5.966, 1.099, 395.511, 11524, Advance slot, epoch
1.372, 4.170, 0.017, 276.401, 363345, Apply block, no slot processing
0.000, 0.000, 0.000, 0.000, 0, Database block store
```
* fix subnet calculation in RPC and insert broadcast attestations into node's pool
* unify codepaths to ensure only mostly-checked-to-be-valid attestations enter the pool, even from node's own broadcasts
* update attestation pool tests for new validateAttestation param
cheatfate
Jacek Sieka
zah
zah
tersec
Mamy Ratsimbazafy