- Replace eth_getBlockReceipts return type with Opt[T] instead of Option[T]
- use non-EOL macOS version and fix spelling
- test refc in CI in Nim 2.0 and later
- unittest2.nim: ensure the testTeardownIMPL is performed at the end
- Add test for PR #35
- only run `teardown` if `setup` completed
- Fix allow break in test body regression
- Upgrade github actions to v4
- use non-EOL macOS version for GitHub Actions CI
This PR allows sharing the pubkey data between validators by using a
thread-local cache for pubkey data, netting about a 400mb mem usage
reduction on holesky due to us keeping 3 permanent + several ephemeral
state copies in memory at all times and each state copy holding a full
validator.
The PR also introduces a hash cache for the key which gives ~14% speedup
for a full state `hash_tree_root` - the key makes up for a large part of
the `Validator` htr time.
Finally, the time it takes to copy a state goes down as well from ~80m
ms to ~60, for reasons similar to htr.
We use a `ptr` even if a `ref` could in theory have been used - there is
not much practical benefit to a `ref` (given it's mutable) while a `ptr`
is cheaper and easier to copy (when copying temporary states).
We could go further and cache a cooked pubkey but it turns out this is
quite intrusive - in all the relevant places, we're already using a
cooked key from the immutable validator data so there are no immediate
performance gains of doing so while managing the compressed -> cooked
key mapping would become more difficult - something for a future PR
perhaps.
Co-authored-by: Etan Kissling <etan@status.im>
- Refactor p2pProtocol internals
- Fix chronos related deprecated warnings in discv5 and uTP
- normalise nimble, ci
- Fix chronos related deprecated warnings in uTP code part II
- Remove usage of stew/shim/net
- Upgrade github actions to v4
- Fix two bugs in Receipts RLP encoding/decoding
- Move Ethereum specific RLP encoding tests under tests/common
- Reduce compiler warnings in rlp
- test refc in CI in Nim 2.0 and later
- test Nim 2.0 in CI and use non-EOL macOS version
- Use asyncraises in p2p
- Don't auto write p2pProtocol macro expansion to file
- Fix improper yield usage in rlpx and refine exception handling
- Client also handle error message if id is null
- Client pass meaningful error to newFut when processMessage failed
- Refactoring: extract rpc handler from HTTP and WebSocket server
- Use pragma push/pop pair to disable warning
- http server better exception handling
- Fix CI badge url
- Upgrade github actions to v4
- Revert "Fix CI badge url"
- HttpAuthHook use async raises
- Move CancelledError handling to outer try/except of RpcWebsocketServer
- Implement RPC batch call both in servers and clients
- v0.4.0
- Should compile if chronicles log turned on
- Add framework to support more optional types
- v0.4.2
- test refc in CI in Nim 2.0 and later
- use non-EOL macOS version for GitHub Actions CI
- avoid failing uninitialized `Future`
- Improve batch call example and wrapper comments
- Fix ws and socket client error handling and add test to #212
- Add build test with chronicles to json enabled
- update instructions for tracking upstream MIRACL Core
- bump `bls12-381-tests` to `v0.1.2`
- bump `miracl-core` to `0f67878bee7c4108405deb2b0b5e4e58d1ae30fc`
- test refc in CI in Nim 2.0 and later
- rename `milagro.nims` -> `miracl.nims`
- rename `milagro.nim` -> `miracl.nim`
- rename `milagro(Path|_func)` -> `miracl(Path|_func)`
- rename `milagro` references -> `miracl` in documentation
- Synchronize order of `blobGasUsed` / `excessBlobGas` in test
- Reduce compiler warnings
- Upgrade github actions to v4
- v0.3.2
- re-add support for `fromBlock`, `toBlock`, `blockHash` in `eth_getLogs`
- Feature flag for raises support
- HTTP server middleware implementation
- Fix examples documentation
- check leaks after every test
- deprecate `callback=`, UDP fixes
- Improve parseList and parseInlineTable strictness
- v0.2.10
- Switch to llvm-mingw for faster Windows CI
- Add configureTomlDeserialization to README.md
- Put array/inline table nonstandard behavior behind flag
- Unify parseList and parseArray implementation
- v0.2.12
- Fix a bunch of compiler hints and warnings in uTP and discv5
- Fix missing std/times import for the metrics 0.0.1 case
- Fix for uTP issues with latest chronos
- Clean-up, correct and clarify utp_protocol tests
- better async timeout wait
- Adjust test names and comments for `blobGasUsed` field
- Add data over multiple sockets uTP test
- Add uTP over discv5 test and small uTP performance improvements
Etan Kissling (2):
remove unused `skip0xPrefix`
keep the internal count helper
Will (1):
Bugfix/nully values (#61)
Yuriy Glukhov (5):
Contract constructor support
Fixed compilation error in exec function
Added string encoding
Fixed source->from field of EthCall
More flexibility to contract DSL, Async contract caller
jangko (5):
Reduce compiler warnings when using Nim v2
Migrate to json-serialization
Add tests of json rpc marshalled types
Resolve contract_dsl ambiguity
Event handler passing around JsonString instead of JsonNode
Share encoder between json-rpc and chronicles (#119)
Simplify generic constraint of rpc and chronicles encoders
Feature/execution api spec (#69)
v0.3.0
bump nim-json-rpc to a6475e49b26d3afc58aaa3d67621c94eafef8efb
coffeepots (1):
Use nim-json-serialization for RPCs (#172)
jangko (10):
Add copyright to source file
Remove StringOfJson
Fix optional parameter parsing fails in rpc macro with generics
Rename jrpc_sys module back to jsonmarshal
Reenable test hhtps
Add test for createRpcSigsFromNim and createSingleRpcSig
Let the OS choose the port for tests
Add onProcessMessage hook to client
Fix example in the README.md
Move errors module back to json_rpc folder
Upgrade rpc router internals (#178)
RPC server handle null return value correctly
v0.3.0
kdeme (1):
Add example test case that currently fails the Option parsing
- use still-supported versions of Ubuntu and macOS in GitHub Actions CI
- try py3 for autobahn
- Remove Nim 1.2
- Handle cancellation in close
- make nimble file consistent with CI setup
- replace `utils` module with direct `generate` calls
- allow manually triggering CI
- Fix grammatical errors of README.md
- Fix breaking changes introduces by upstream nim-serialization
- Remove unreachable code
- Fix cache key of Nim binaries
- Increase stack size of Windows
- Add note to increase stack size on Windows
- add `{.raises.}` annotation to `writeValue`
- add more missing `{.raises.}` annotations
- version 0.2.8
- Add table of contents to README.md
- Add JsonVoid, JsonNumber, and JsonValueRef to JsonWriter
- Add JsonWriter helper procs to README.md
- v0.2.2
- Improve nested structure depth limit check
- Fix JsonValueRef nil comparison
- Reduce declared but not used warning
- Restore accidentally deleted raises pragma
- Switch to mingw-llvm for faster Windows CI
- Increase stack size on Windows when running CI
This PR causes a few new warnings to appear - these are harmless but
will need addressing separately as they span several libraries.
* new asyncraises syntax
* asyncraises support in several modules
* `sink` usage reduces spurious copying
* `?` compatiblity for `async` + `results`
* remove `-d:chronosStrictException` (obsolete)
The `eth2-networks` repo often receives metadata updates with a delay.
Switch to `goerli` repo to obtain the latest config (Dencun scheduling)
when it is updated. This is in line with how Sepolia / Holesky work.
- https://github.com/eth-clients/goerli/pull/178
This requires all object types to be explicitly white-listed for
default serialization. The PR makes the minimal changes, although
a number of similar mechanisms in eth2_rest_serialization can now
be removed.
* Bump nim-eth: Change block timestamp from std.Time to distinct uint64
Also change tx.maxFeePerBlobGas from GasInt to UInt256
following Cancun latest spec
* Fix EthTime.now from func to proc due to sideeffects
- Add IP and location information to mainnet bootnodes
- Change IP and location of a Teku bootstrap node
- Add lighthouse's ipv6 compatible bootnodes
- Adding new Teku mainnet bootnodes
- Remove the ENRs from eth2 networks
* implement EIP-7514 for Deneb: Add Max Epoch Churn Limit
Cap activations per epoch according to EIP-7514:
- https://eips.ethereum.org/EIPS/eip-7514
- https://github.com/ethereum/consensus-specs/pull/3499
* apply proposer boost to first block in case of equivocation
Implement spec changes to fork choice; this only affects equivocation
when multiple blocks are signed for the same slot. Regular operation
is not changed.
- https://github.com/ethereum/consensus-specs/pull/3352
* bump test vectors to v1.4.0-beta.2-hotfix
---------
Co-authored-by: tersec <tersec@users.noreply.github.com>
The 'vendor/holesky/public-keys/all.txt' file is not used by Nimbus,
but sometimes fails to download due to payment issues in `@eth-clients`.
Skipping the download of that file should reduce that risk.
```
Downloading public-keys/all.txt (240 MB)
Error downloading object: public-keys/all.txt (ba977b5): Smudge error: Error downloading public-keys/all.txt (ba977b5b1da180914c934623fce187860e1b54cff939e6208533b2cb5f589e07): batch response: This repository is over its data quota. Account responsible for LFS bandwidth should purchase more data packs to restore access.
```
* bump nbs: Patch libnatpmp.a rule to support llvm-mingw in targets.mk
* bump nbs: Allow passing config to submodule initialization in `update-common`
* Add metadata for the Holesky network
* Add copyright banner to the new Nim module
* Working version
* Bump Chronos to fix downloading from Github
* Add checksum check of the downloaded file
* Clean up debugging code and obsolete imports
Suite names were not being used because `test` has to have access to it
during instantiation - this PR cleans things up a little while at the
same time upgrading unittest2.
* bump `nim-chronicles` to `71556f84af16cd275a8ae4c2390060481c6fedf7`
- remove Nim 1.2 and 1.4 support; test Nim 2.0 in CI
- suppress some more `IOError` when logging
* bump `nim-json-serialization` to `85b7ea093cb85ee4f433a617b97571bd709d30df`
- add `readValue` implementations for case objects
- add `{.raises.}` annotation to `writeValue`
```
Essential changes:
security bugfix in Go bindings
run-time switch in portable build
no-std support [exercised with limited stack size of 56K]
serde support
blst_miller_loop_n interface, with parallelized Rust and Go
counterparts
optional blst_fr_pentaroot subroutine
Emscripten bindings
hardened security on non-asm platforms
```
* move file loading out of timed ncli section to focus benchmark on
deserialization rather than disk loading
* JSON loading fix included in bump, but does not practically happen
since we generally don't load hashlist from JSON
* async batch verification
When batch verification is done, the main thread is blocked reducing
concurrency.
With this PR, the new thread signalling primitive in chronos is used to
offload the full batch verification process to a separate thread
allowing the main threads to continue async operations while the other
threads verify signatures.
Similar to previous behavior, the number of ongoing batch verifications
is capped to prevent runaway resource usage.
In addition to the asynchronous processing, 3 addition changes help
drive throughput:
* A loop is used for batch accumulation: this prevents a stampede of
small batches in eager mode where both the eager and the scheduled batch
runner would pick batches off the queue, prematurely picking "fresh"
batches off the queue
* An additional small wait is introduced for small batches - this helps
create slightly larger batches which make better used of the increased
concurrency
* Up to 2 batches are scheduled to the threadpool during high pressure,
reducing startup latency for the threads
Together, these changes increase attestation verification throughput
under load up to 30%.
* fixup
* Update submodules
* fix blst build issues (and a PIC warning)
* bump
---------
Co-authored-by: Zahary Karadjov <zahary@gmail.com>
* speed up state/block loading
When loading blocks and states from db/era, we currently redundantly
check their CRC32 - for a state, this costs 50ms of loading time
presently (110mb uncompressed size) on a decent laptop.
* remove `maxDecompressedDbRecordSize` - not actually used on recent
data since we store the framed format - also, we're in luck: we blew
past the limit quite some time ago
* fix obsolete exception-based error checking
* avoid `zeroMem` when reading from era store
see https://github.com/status-im/nim-snappy/pull/22 for benchmarks
* bump snappy
* Add new REST endpoints to monitor REST server connections and new chronos metrics.
* Bump head versions of chronos and presto.
* Bump chronos with regression fix.
* Remove outdated tests which was supposed to test pipeline mode.
* Disable pipeline mode in resttest.
* Update copyright year.
* Upgrade test_signing_node to start use AsyncProcess instead of std library's osproc.
Bump chronos to check graceful shutdown.
* Update AllTests.
* Bump chronos.
> sqlite3: better error message
> Use results Opt for discv5 getNode and resolve
> implement EIP-4844: Shard Blobs Transactions
> Enable tests with also json sink and fix failures
> Style fixes and comment improvements on uTP code
> fixes related to stint breaking changes
> Fix potentential uTP socket leak for socket in SynSent state
> Avoid double socket destroy on timed-out uTP SYN-ACK
> remove stddefects import
> use correct exception in `parseCmdArg`
* bump `nim-zlib` to `f34ca261efd90f118dc1647beefd2f7a69b05d93`
- ignore *.exe
- nim 1.6 adjustment
- update github action to v3
- use Nim 2.0 in CI
- test both refc and ORC in post-1.6 Nim versions
- remove Nim 1.2 and 1.4 support
* bump `nim-websock` for compatibility
`nim-websock` `fea05cde8b123b38d1a0a8524b77efbc84daa848` is needed
- reduce compiler warnings
Etan Kissling
Eugene Kabanov
Jacek Sieka
tersec
andri lim
diegomrsantos
zah
4rgon4ut
Tanguy
henridf