Just the variable, not yet `lcDataForkAtStateFork` / `atStateFork`.
- Shorten comment in `light_client.nim` to keep line width
- Do not rename `stateFork` mention in `runProposalForkchoiceUpdated`.
- Do not rename `stateFork` in `getStateField(dag.headState, fork)`
Rest is just a mechanical mass replace
When using `--history=prune`, `dag.tail.slot` may advance beyond the
configured light client data retention period. Update the LC logic so
that the `dag.tail.slot` is no longer considered for LC pruning.
It is still considered to check whether new data can be produced.
* Support for driving multiple EL nodes from a single Nimbus BN
Full list of changes:
* Eth1Monitor has been renamed to ELManager to match its current
responsibilities better.
* The ELManager is no longer optional in the code (it won't have
a nil value under any circumstances).
* The support for subscribing for headers was removed as it only
worked with WebSockets and contributed significant complexity
while bringing only a very minor advantage.
* The `--web3-url` parameter has been deprecated in favor of a
new `--el` parameter. The new parameter has a reasonable default
value and supports specifying a different JWT for each connection.
Each connection can also be configured with a different set of
responsibilities (e.g. download deposits, validate blocks and/or
produce blocks). On the command-line, these properties can be
configured through URL properties stored in the #anchor part of
the URL. In TOML files, they come with a very natural syntax
(althrough the URL scheme is also supported).
* The previously scattered EL-related state and logic is now moved
to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim`
in a follow-up commit). State is assigned properly either to the
`ELManager` or the to individual `ELConnection` objects where
appropriate.
The ELManager executes all Engine API requests against all attached
EL nodes, in parallel. It compares their results and if there is a
disagreement regarding the validity of a certain payload, this is
detected and the beacon node is protected from publishing a block
with a potential execution layer consensus bug in it.
The BN provides metrics per EL node for the number of successful or
failed requests for each type Engine API requests. If an EL node
goes offline and connectivity is resoted later, we report the
problem and the remedy in edge-triggered fashion.
* More progress towards implementing Deneb block production in the VC
and comparing the value of blocks produced by the EL and the builder
API.
* Adds a Makefile target for the zhejiang testnet
* Local sim impovements
* Added support for running Capella and EIP-4844 simulations
by downloading the correct version of Geth.
* Added support for using Nimbus remote signer and Web3Signer.
Use 2 out of 3 threshold signing configuration in the mainnet
configuration and regular remote signing in the minimal one.
* The local testnet simulation can now use a payload builder.
This is currently not activated in CI due to lack of automated
procedures for installing third-party relays or builders.
You are adviced to use mergemock for now, but for most realistic
results, we can create a simple builder based on the nimbus-eth1
codebase that will be able to propose transactions from the regular
network mempool.
* Start the simulation from a merged state. This would allow us
to start removing pre-merge functionality such as the gossip
subsciption logic. The commit also removes the merge-forcing
hack installed after the TTD removal.
* Consolidate all the tools used in the local simulation into a
single `ncli_testnet` binary.
Other changes:
Renamed the `EIP_4844_FORK_*` config constants to `DENEB_FORK_*` as
this matches the latest spec and it's already used in the official
Sepolia config.
By pre-seeding the sync committee cache when applying blocks, we avoid a
significantly expensive validator set traversal / sync committee index
construction during sync / block application - 20-30% sync speedup
post-altair.
* also cache/reload total active balance for another cool 10%
Extends fork choice state to also track slot numbers to improve accuracy
of `/eth/v1/debug/fork_choice` endpoint. Autoenable this API on devnet,
and disable some extra checks on devnet to aid focused testing efforts.
Align fork choice pruning logic with API based on checkpoints vs root.
* clean up some Nim 1.2 workarounds
* re-add notes about JS backend
* another proc/noSideEffect -> func
* revert ncli/ncli_common.nim changes; 19969 evidently wasn't backported to 1.6
To allow LC data retention longer than the one for historic states,
introduce persistent DB caches for `current_sync_committee` and
`LightClientHeader` for finalized epoch boundary blocks.
This way, historic `LightClientBootstrap` requests may still be honored
even after pruning. Note that historic `LightClientUpdate` requests are
already answered using fully persisted objects, so don't need changes.
Sync committees and headers are cached on finalization of new data.
For existing data, info is lazily cached on first access.
Co-authored-by: Jacek Sieka <jacek@status.im>
When the epoch boundary block is missed, we incorrectly assume that the
next couple blocks improve finality, leading to repeated pushes of the
same light client finality update and incorrectly ignoring some gossip.
* exit/validatorchange pool includes BLS to execution messages; REST
support for new pool
* catch failed individual futures
* increase BLS changes bound and keep BLS seen consistent with subpool
* deque capacities should be powers of 2
Distinguish between those code locations that need to be updated on each
light client data format change, and those others that should generally
be fine, as long as a valid light client object is processed.
The former are tagged with static assert for `LightClientDataFork.high`.
The latter are changed to `lcDataFork > LightClientDataFork.None` to
indicate that they depend only on presence of any valid object.
Also bundled a few minor cleanups and fixes.
Also add `Forky` type for `LightClientStore` and minor fixes / cleanups.
The light client data structures were changed to accommodate additional
fields in future forks (e.g., to also hold execution data).
There is a minor change to the JSON serialization, where the `header`
properties are now nested inside a `LightClientHeader`.
The SSZ serialization remains compatible.
See https://github.com/ethereum/consensus-specs/pull/3190
and https://github.com/ethereum/beacon-APIs/pull/287
In a future fork, light client data will be extended with execution info
to support more use cases. To anticipate such an upgrade, introduce
`Forky` and `Forked` types, and ready the database schema.
Because the mapping of sync committee periods to fork versions is not
necessarily unique (fork schedule not in sync with period boundaries),
an additional column is added to `period` -> `LightClientUpdate` table.
* correctly report ignored contributions in metrics
* avoid counting subset contributions in vmon (bring in line with
attestation aggregates)
* avoid signature checks for subset attestations
A being a non-strict subset is a sufficient condition to ignore.
Introduce (optional) pruning of historical data - a pruned node will
continue to answer queries for historical data up to
`MIN_EPOCHS_FOR_BLOCK_REQUESTS` epochs, or roughly 5 months, capping
typical database usage at around 60-70gb.
To enable pruning, add `--history=prune` to the command line - on the
first start, old data will be cleared (which may take a while) - after
that, data is pruned continuously.
When pruning an existing database, the database will not shrink -
instead, the freed space is recycled as the node continues to run - to
free up space, perform a trusted node sync with a fresh database.
When switching on archive mode in a pruned node, history is retained
from that point onwards.
History pruning is scheduled to be enabled by default in a future
release.
In this PR, `minimal` mode from #4419 is not implemented meaning
retention periods for states and blocks are always the same - depending
on user demand, a future PR may implement `minimal` as well.
With https://github.com/status-im/nimbus-eth2/pull/4420 implemented, the
checks that we perform are equivalent to those of a `SYNCING` EL - as
such, we can treat missing EL the same as SYNCING and proceed with an
optimistic sync.
This mode of operation significantly speeds up recovery after an offline
EL event because the CL is already synced and can immediately inform the
EL of the latest head.
It also allows using a beacon node for consensus archival queries
without an execution client.
* deprecate `--optimistic` flag
* log block details on EL error, soften log level because we can now
continue to operate
* `UnviableFork` -> `Invalid` when block hash verification fails -
failed hash verification is not a fork-related block issue
When not backfilling all the way to genesis (#4421), it becomes more
useful to start rebuilding the historical indices from an arbitrary
starting point.
To rebuild the index from non-genesis, a state and an unbroken block
history is needed - here, we allow loading the state from an era file
and recreating the history from there onwards.
* speed up partial era state loading
When backfilling, we only need to download blocks that are newer than
MIN_EPOCHS_FOR_BLOCK_REQUESTS - the rest cannot reliably be fetched from
the network and does not have to be provided to others.
This change affects only trusted-node-synced clients - genesis sync
continues to work as before (because it needs to construct a state by
building it from genesis).
Those wishing to complete a backfill should do so with era files
instead.
Trigger ANSI art on upgrade to Capella, similar to the merge.
Future extension could log blinking art when user successfully managed
to get BLS to Execution change included into a block for a validator.
Art created by http://beatscribe.com/ (beatscribe#1008 on Discord)
Other changes:
* More optimal search for TTD block.
* Add timeouts to all REST requests during trusted node sync.
Fixes#4037
* Removed support for storing a deposit snapshot in the network
metadata.
* Types and scaffolding for EIP-4844
This commit adds the EIP-4844 spec types, and fills in
scaffolding/boilerplate for the use of these types across the repo.
None of the actual EIP-4844 logic is introduced yet.
This follows the pattern used by @tersec when introducing Capella (#4276).
* use eth2-networks fork
* review feedback: add static check EIP4844_FORK_EPOCH == FAR_FUTURE_EPOCH
* review feedback: remove EIP4844 from /eth/v1/config/spec response
* Cleanup / review feedback
* Fix REST test
* implement several capellaImplementationMissing points
* don't register validator activity for not-active validators
* don't check validator indices already coming out of committees which exist; must be active validators, or else other deeper bugs
* Initial commit.
* NextAttestationEntry type.
* Add doppelgangerCheck and actual check.
* Recover deleted check.
* Remove NextAttestainEntry changes.
* More cleanups for NextAttestationEntry.
* Address review comments.
* Remove GENESIS_EPOCH specific check branch.
* Decrease number of full epochs for doppelganger check in VC.
Co-authored-by: zah <zahary@status.im>
We currently use `BlockError` for both beacon blocks and LC objects.
In light of EIP4844, we will likely also use it for blob sidecars.
To avoid confusion, renaming it to a more generic `VerifierError`,
and update its documentation to be more generic.
To avoid long lines as a followup, also renaming the `block_processor`'s
`BlockProcessingCompleted.completed`->`ProcessingStatus.completed` and
`BlockProcessingCompleted.notCompleted`->`ProcessingStatus.notCompleted`
This PR removes a bunch of code to make TNS aware of era files, avoiding
a duplicated backfill when era files are available.
* reuse chaindag for loading backfill state, replacing the TNS homebrew
* fix era block iteration to skip empty slots
* add tests for `can_advance_slots`
* move duty tracking code to `ActionTracker`
* fix earlier duties overwriting later ones
* re-run subnet selection when new duty appears
* log upcoming duties as soon as they're known (vs 4 epochs before)
Currently, we require genesis and a checkpoint block and state to start
from an arbitrary slot - this PR relaxes this requirement so that we can
start with a state alone.
The current trusted-node-sync algorithm works by first downloading
blocks until we find an epoch aligned non-empty slot, then downloads the
state via slot.
However, current
[proposals](https://github.com/ethereum/beacon-APIs/pull/226) for
checkpointing prefer finalized state as
the main reference - this allows more simple access control and caching
on the server side - in particular, this should help checkpoint-syncing
from sources that have a fast `finalized` state download (like infura
and teku) but are slow when accessing state via slot.
Earlier versions of Nimbus will not be able to read databases created
without a checkpoint block and genesis. In most cases, backfilling makes
the database compatible except where genesis is also missing (custom
networks).
* backfill checkpoint block from libp2p instead of checkpoint source,
when doing trusted node sync
* allow starting the client without genesis / checkpoint block
* perform epoch start slot lookahead when loading tail state, so as to
deal with the case where the epoch start slot does not have a block
* replace `--blockId` with `--state-id` in TNS command line
* when replaying, also look at the parent of the last-known-block (even
if we don't have the parent block data, we can still replay from a
"parent" state) - in particular, this clears the way for implementing
state pruning
* deprecate `--finalized-checkpoint-block` option (no longer needed)
* Allow chain dag without genesis / block
This PR enables the initialization of the dag without access to blocks
or genesis state - it is a prerequisite for implementing a number of
interesting features:
* checkpoint sync without any block download
* pruning of blocks and states
* backfill checkpoint block
When EL `newPayload` is slow (e.g., Raspberry Pi with Besu), the epoch
and shuffling caches tend to fill up with multiple copies per epoch when
processing gossip and performing validator duties close to wall slot.
The old strategy of evicting oldest epoch led to the same item being
evicted over and over, leading to blocking of over 5 minutes in extreme
cases where alternate epochs/shuffling got loaded repeatedly.
Changing the cache eviction strategy to least-recently-used seems to
improve the situation drastically. A simple implementation was selected
based on single linked-list without a hashtable.
When backfilling LC updates (`--light-client-data-import-mode=full`),
the highest participation update is computed without ensuring that the
finalized header is in the same period. Updates sharing same period for
both finalized and attested headers should be preferred.
Fixes a bug leading to suboptimal update selection.
* avoid database race-condition inconsistency after fcU `INVALID` then crash
* ensure head doesn't fall behind finalized; add more tests for head movement/reloading DAG
When the BN's head is reorged while shut down, reloading the BN will not
assign `BlockRef` to alternate branches. However, blocks from other
branches are still present in the database, leading to their descendants
incorrectly marked as `UnviableFork`. By restricting the check to blocks
that have been finalized, they should be reported as `MissingParent`
instead, eventually re-assigning a `BlockRef` to them.
Since these files may have been created in a previous run or manually,
we want to keep loading them even on nodes that don't enable the
keystore API (for example static setups)
Other changes:
* log keystore loading progressively (#3699)
* print initial fee recipient when loading validators
* log dynamic fee recipient updates
* more efficient forkchoiceUpdated usage
* await rather than asyncSpawn; ensure head update before dag.updateHead
* use action tracker rather than attached validators to check for next slot proposal; use wall slot + 1 rather than state slot + 1 to correctly check when missing blocks
* re-add two-fcU case for when newPayload not VALID
* check dynamicFeeRecipientsStore for potential proposal
* remove duplicate checks for whether next proposer
When the BN-embedded LC makes sync progress, pass the corresponding
execution block hash to the EL via `engine_forkchoiceUpdatedV1`.
This allows the EL to sync to wall slot while the chain DAG is behind.
Renamed `--light-client` to `--sync-light-client` for clarity, and
`--light-client-trusted-block-root` to `--trusted-block-root` for
consistency with `nimbus_light_client`.
Note that this does not work well in practice at this time:
- Geth sticks to the optimistic sync:
"Ignoring payload while snap syncing" (when passing the LC head)
"Forkchoice requested unknown head" (when updating to LC head)
- Nethermind syncs to LC head but does not report ancestors as VALID,
so the main forward sync is still stuck in optimistic mode:
"Pre-pivot block, ignored and returned Syncing"
To aid EL client teams in fixing those issues, having this available
as a hidden option is still useful.
The optimistic sync spec was updated since the LC based optsync module
was introduced. It is no longer necessary to wait for the justified
checkpoint to have execution enabled; instead, any block is okay to be
optimistically imported to the EL client, as long as its parent block
has execution enabled. Complex syncing logic has been removed, and the
LC optsync module will now follow gossip directly, reducing the latency
when using this module. Note that because this is now based on gossip
instead of using sync manager / request manager, that individual blocks
may be missed. However, EL clients should recover from this by fetching
missing blocks themselves.
* Harden block proposal against expired slashings/exits
When a message is signed in a phase0 domain, it can no longer be
validated under bellatrix due to the correct fork no longer being
available in the `BeaconState`.
To ensure that all slashing/exits are still valid, in this PR we re-run
the checks in the state that we're proposing for, thus hardening against
both signatures and other changes in the state that might have
invalidated the message.
* fix same message added multiple times
in case of attestation slashing of multiple validators in one go
Aligns the default retention policy for LC data with the one for blocks.
Minimum spec requirement for both blocks and LC data is ~5 months.
Additional use cases are better supported by retaining data for longer.
In order to avoid full replays when validating attestations hailing from
untaken forks, it's better to keep shufflings separate from `EpochRef`
and perform a lookahead on the shuffling when processing the block that
determines them.
This also helps performance in the case where REST clients are trying to
perform lookahead on attestation duties and decreases memory usage by
sharing shufflings between EpochRef instances of the same dependent
root.
When there is heavy forking, proposals may get missed due to including
attestations from different forks that later fail verification.
Checking attestation signatures when building blocks should fix this.
Adds the `--web3-url` launch argument to `nimbus_light_client` to enable
driving the EL with the optimistic head obtained from LC sync protocol.
This will keep issuing `newPayload` / `forkChoiceUpdated` requests for
new blocks, marking them as optimistic. `ZERO_HASH` is reported as the
finalized block for now.
Whether new blocks/attestations/etc are produced internally or received
via REST, their journey through the node is the same - to ensure that
they get the same treatment (logging, metrics, processing), this PR
moves the routing to a dedicated module and fixes several small
differences that existed before.
* `xxxValidator` -> `processMessageName` - the processor also was adding
messages to pools, so we want the name to reflect that action
* add missing "sent" metrics for some messages
* document ignore policy better - already-seen messages are not actaully
rebroadcast by libp2p
* skip redundant signature checks for internal validators consistently
tersec
Etan Kissling
zah
henridf
Jacek Sieka
Eugene Kabanov
Miran