When launched with `--light-client-enable` the latest blocks are fetched
and optimistic candidate blocks are passed to a callback (log for now).
This helps accelerate syncing in the future (optimistic sync).
* SSZ `[]` -> `mitem`
* `[]` -> `item`
immutable access via mutable instance cannot rely on template
overloading, and `[]` cannot be a `func` because of special seq handling
in compiler.
* document static vs dynamic range checking requirements
* add `vindices` iterator to iterate over valid validator indices in a
state
* clean up spec comments in general
* fixup
Co-authored-by: tersec <tersec@users.noreply.github.com>
Incorporates the latest changes to the light client sync protocol based
on Devconnect AMS feedback. Note that this breaks compatibility with the
previous prototype, due to changes to data structures and endpoints.
See https://github.com/ethereum/consensus-specs/pull/2802
Time in the beacon chain is expressed relative to the genesis time -
this PR creates a `beacon_time` module that collects helpers and
utilities for dealing the time units - the new module does not deal with
actual wall time (that's remains in `beacon_clock`).
Collecting the time related stuff in one place makes it easier to find,
avoids some circular imports and allows more easily identifying the code
actually needs wall time to operate.
* move genesis-time-related functionality into `spec/beacon_time`
* avoid using `chronos.Duration` for time differences - it does not
support negative values (such as when something happens earlier than it
should)
* saturate conversions between `FAR_FUTURE_XXX`, so as to avoid
overflows
* fix delay reporting in validator client so it uses the expected
deadline of the slot, not "closest wall slot"
* simplify looping over the slots of an epoch
* `compute_start_slot_at_epoch` -> `start_slot`
* `compute_epoch_at_slot` -> `epoch`
A follow-up PR will (likely) introduce saturating arithmetic for the
time units - this is merely code moves, renames and fixing of small
bugs.
* REST cleanups
* reject out-of-range committee requests
* print all hex values as lower-case
* allow requesting state information by head state root
* turn `DomainType` into array (follow spec)
* `uint_to_bytesXX` -> `uint_to_bytes` (follow spec)
* fix wrong dependent root in `/eth/v1/validator/duties/proposer/`
* update documentation - `--subscribe-all-subnets` is no longer needed
when using the REST interface with validator clients
* more fixes
* common helpers for dependent block
* remove test rules obsoleted by more strict epoch tests
* fix trailing commas
* Update docs/the_nimbus_book/src/rest-api.md
* Update docs/the_nimbus_book/src/rest-api.md
Co-authored-by: sacha <sacha@status.im>
Validator monitoring based on and mostly compatible with the
implementation in Lighthouse - tracks additional logs and metrics for
specified validators so as to stay on top on performance.
The implementation works more or less the following way:
* Validator pubkeys are singled out for monitoring - these can be
running on the node or not
* For every action that the validator takes, we record steps in the
process such as messages being seen on the network or published in the
API
* When the dust settles at the end of an epoch, we report the
information from one epoch before that, which coincides with the
balances being updated - this is a tradeoff between being correct
(waiting for finalization) and providing relevant information in a
timely manner)
* fix stack overflow crash in REST/debug/getStateV2
* introduce `ForkyXxx` for generic type matching of `Xxx` across
branches (SomeHashedBeaconState -> ForkyHashedBeaconState et al) -
`Some` is already used for other types of type classes
* consolidate function naming in BeaconChainDB, use some generics
* import `forks.nim` from other spec modules and move `Forked*` helpers
around to resolve circular imports
* remove `ForkedBeaconState`, use `ForkedHashedBeaconState` throughout
(less data shuffling between the types)
* fix several cases of states being stored on stack in tests, causing
random failures on some platforms
* remove reading json support from ncli - this should be ported to the
rest json reading instead (doesn't currently work because stack sizes)
The sync committee period used to be a plain `uint64`. With the light
client sync relying more heavily on them, it makes sense to introduce
a proper type for them, similar to how they are already used for `Slot`
and `Epoch`. This introduces such a `SyncCommitteePeriod` type.
Furthermore, some usage code dealing with those periods is cleaned up.
* `SyncCommitteeIndex` -> `SyncSubcommitteeIndex`
* `syncCommitteePeriod` -> `sync_committee_period` (spec spelling)
* tighten period comparisons
* fix assert when validating committee message with non-altair state in
REST api
Adds a function that constructs a Merkle proof for a generalized index.
This will be used during light client sync to update light clients with
a new state (see NEXT_SYNC_COMMITTEE_INDEX / FINALIZED_ROOT_INDEX).
* add merge SSZ consensus object tests
* add merge attestations, attester slashing, proposer slashing, and voluntary exit test fixtures
* throw catchable exception rather than assert on invalid SingleMemberUnion selector
* hash_tree_root can assert, because it's trusted data by that point
* re-assert on writing, since also trusted data
* beta.4 update
* implement upgrade_to_merge()
* approximately double altair epoch processing speed
* don't redundantly clear state balances cache
* only invalidate altair state balances cache once in process_rewards_and_penalties()
* reorganize ssz dependencies
This PR continues the work in
https://github.com/status-im/nimbus-eth2/pull/2646,
https://github.com/status-im/nimbus-eth2/pull/2779 as well as past
issues with serialization and type, to disentangle SSZ from eth2 and at
the same time simplify imports and exports with a structured approach.
The principal idea here is that when a library wants to introduce SSZ
support, they do so via 3 files:
* `ssz_codecs` which imports and reexports `codecs` - this covers the
basic byte conversions and ensures no overloads get lost
* `xxx_merkleization` imports and exports `merkleization` to specialize
and get access to `hash_tree_root` and friends
* `xxx_ssz_serialization` imports and exports `ssz_serialization` to
specialize ssz for a specific library
Those that need to interact with SSZ always import the `xxx_` versions
of the modules and never `ssz` itself so as to keep imports simple and
safe.
This is similar to how the REST / JSON-RPC serializers are structured in
that someone wanting to serialize spec types to REST-JSON will import
`eth2_rest_serialization` and nothing else.
* split up ssz into a core library that is independendent of eth2 types
* rename `bytes_reader` to `codec` to highlight that it contains coding
and decoding of bytes and native ssz types
* remove tricky List init overload that causes compile issues
* get rid of top-level ssz import
* reenable merkleization tests
* move some "standard" json serializers to spec
* remove `ValidatorIndex` serialization for now
* remove test_ssz_merkleization
* add tests for over/underlong byte sequences
* fix broken seq[byte] test - seq[byte] is not an SSZ type
There are a few things this PR doesn't solve:
* like #2646 this PR is weak on how to handle root and other
dontSerialize fields that "sometimes" should be computed - the same
problem appears in REST / JSON-RPC etc
* Fix a build problem on macOS
* Another way to fix the macOS builds
Co-authored-by: Zahary Karadjov <zahary@gmail.com>
The spec imports are a mess to work with, so this branch cleans them up
a bit to ensure that we avoid generic sandwitches and that importing
stuff generally becomes easier.
* reexport crypto/digest/presets because these are part of the public
symbol set of the rest of the spec types
* don't export `merge` types from `base` - this causes circular deps
* fix circular deps in `ssz/spec_types` - this is the first step in
disentangling ssz from spec
* be explicit about phase0 vs altair - longer term, `altair` will become
the "natural" type set, then merge and so on, so no point in giving
`phase0` special preferential treatment
* update to Altair as of v1.1.0-alpha.7
* introduce Altair types into attestation pool
* avoid allocating/copying pubkeys excessively in get_next_sync_committee()
* proposed structure for hf1
* refactor datatypes.nim into datatypes/{base, phase0, hf1}.nim
* hf1 is Altair
* some syncing with alpha 2
* adjust epoch processing to disambiguate access to RewardFlags
* relocate StateData to stay consistent with meaning phase 0 StateData
* passes v1.1.0 alpha 5 SSZ consensus object tests
* Altair block header test fixtures work
* fix slash_validator() so that Altair attester slashings, proposer slashings, and voluntary exit textures work
* deposit operation Altair test fixtures work
* slot sanity and all but a couple epoch transition tests switched to Altair
* attestation Altair test fixtures work
* Altair block sanity test fixtures work
* add working altair sync committee tests
* improve workarounds for sum-types-across-modules Nim bug; incorporate SignedBeaconBlock root reconstuction to SSZ byte reader
Since quite a lot of additional procs were now compiled as generics, this lead to compiler bugs that had
to be worked-around:
* The `Domain` type was renamed to `Eth2Domain` to avoid compilation errors
due to conflicts with `nativesockets.Domain`.
Similarly, `eth2_network.KeyPair` was renamed to `NetKeyPair`.
* A new more robust version of `hexToByteArray` was added to stew
* performance fixes
* don't mark tree cache as dirty on read-only List accesses
* store only blob in memory for keys and signatures, parse blob lazily
* compare public keys by blob instead of parsing / converting to raw
* compare Eth2Digest using non-constant-time comparison
* avoid some unnecessary validator copying
This branch will in particular speed up deposit processing which has
been slowing down block replay.
Pre (mainnet, 1600 blocks):
```
All time are ms
Average, StdDev, Min, Max, Samples, Test
Validation is turned off meaning that no BLS operations are performed
3450.269, 0.000, 3450.269, 3450.269, 1, Initialize DB
0.417, 0.822, 0.036, 21.098, 1400, Load block from database
16.521, 0.000, 16.521, 16.521, 1, Load state from database
27.906, 50.846, 8.104, 1507.633, 1350, Apply block
52.617, 37.029, 20.640, 135.938, 50, Apply epoch block
```
Post:
```
3502.715, 0.000, 3502.715, 3502.715, 1, Initialize DB
0.080, 0.560, 0.035, 21.015, 1400, Load block from database
17.595, 0.000, 17.595, 17.595, 1, Load state from database
15.706, 11.028, 8.300, 107.537, 1350, Apply block
33.217, 12.622, 17.331, 60.580, 50, Apply epoch block
```
* more perf fixes
* load EpochRef cache into StateCache more aggressively
* point out security concern with public key cache
* reuse proposer index from state when processing block
* avoid genericAssign in a few more places
* don't parse key when signature is unparseable
* fix `==` overload for Eth2Digest
* preallocate validator list when getting active validators
* speed up proposer index calculation a little bit
* reuse cache when replaying blocks in ncli_db
* avoid a few more copying loops
```
Average, StdDev, Min, Max, Samples, Test
Validation is turned off meaning that no BLS operations are performed
3279.158, 0.000, 3279.158, 3279.158, 1, Initialize DB
0.072, 0.357, 0.035, 13.400, 1400, Load block from database
17.295, 0.000, 17.295, 17.295, 1, Load state from database
5.918, 9.896, 0.198, 98.028, 1350, Apply block
15.888, 10.951, 7.902, 39.535, 50, Apply epoch block
0.000, 0.000, 0.000, 0.000, 0, Database block store
```
* clear full balance cache before processing rewards and penalties
```
All time are ms
Average, StdDev, Min, Max, Samples, Test
Validation is turned off meaning that no BLS operations are performed
3947.901, 0.000, 3947.901, 3947.901, 1, Initialize DB
0.124, 0.506, 0.026, 202.370, 363345, Load block from database
97.614, 0.000, 97.614, 97.614, 1, Load state from database
0.186, 0.188, 0.012, 99.561, 357262, Advance slot, non-epoch
14.161, 5.966, 1.099, 395.511, 11524, Advance slot, epoch
1.372, 4.170, 0.017, 276.401, 363345, Apply block, no slot processing
0.000, 0.000, 0.000, 0.000, 0, Database block store
```
* add --enable-logtrace argument to launch_local_testnet
* scan for all available logfiles
* remove specific filename references
* update v0.11.3 spec ref to v0.12.2
* add helper for beacon committee length (used for quickly validating
attestations)
* refactor some attestation checks to do cheap checks early
* validate attestation epoch before computing active validator set
* clean up documentation / comments
* fill state cache on demand
* avoid converting from uint64 to int, and where most feasible, int type conversion at all
* .len.uint64 -> .len64
* fix 32-bit compilation
* try keeping state_sim loop variable/bounds as int for 32-bit Azure
* len64 -> lenu64
* cache beacon committee size calculation
this fixes a bug in get_validator_churn_limit as well
* fix
* make committee counts consistently uint64
mixing feels like the worst of the two worlds
* restore EpochRef and flush statecaches on epoch transitions
* more targeted cache invalidation
* remove get_empty_per_epoch_cache(); implement simpler but still faster get_beacon_proposer_index()/compute_proposer_index() approach; add some abstraction layer for accessing the shuffled validator indices cache
* reduce integer type conversions
* remove most of rest of integer type conversion in compute_proposer_index()
This also assigns precise types to the constants in the minimal
and mainnet presets in order to reduce the chance of compilation
errors when custom presets are used (previously, only the custom
presets have precisely assigned types for the constants).
* re-add minimal preset constant checking; organize presets to better support multiple spec versions
* bump spec ref
* increase Azure timeout to 90 minutes to accomodate Nim compiler building
* reorder ssz
* split into hash_trees and ssz_serialization, roughly, for hashing and
IO
* move bitseqs into ssz (from stew)
* clean up imports
* docs, imports
- we have a new binary which connects via RPC to the respective BN and has an internal clock - waking it up on every slot
- the BN has a new option called --external-validators and currently in order to have the VC binaries to run we need to pass EXTERNAL_VALIDATORS=yes to make
- factored some code out of beacon_node.nim for easier reuse in validator_api.nim and validator_client.nim
- the VC loads its associated private keys from the datadir for its BN
- most of the validator API calls have been implemented as a stub.
- the VC polls its BN at the start of each epoch - getting a list of all active validators for the current epoch - and then continues to request blocks and sign them with its appropriate validators when necessary
* sync fixes
* fix Status message finalized info
* work around sync starting before initial status exchange
* don't fail block on deposit signature check failure (fixes#989)
* print ForkDigest and Version nicely
* dump incoming blocks
* fix crash when libp2p peer connection is closed
* update chunk size to 16 to work around missing blocks when syncing
* bump libp2p
* bump libp2p
* better deposit skip message
When replaying state transitions, for the slots that have a block, the
state root is taken from the block. For slots that lack a block, it's
currently calculated using hash_tree_root which is expensive.
Caching the empty slot state roots helps us avoid recalculating this
hash, meaning that for replay, hashes are never calculated. This turns
blocks into fairly lightweight "state-diffs"!
* avoid re-saving state when replaying blocks
* advance empty slots slot-by-slot and save root
* fix sim randomness
* fix sim genesis filename
* introduce `isEpoch` to check if a slot is an epoch slot
* initial 0.11.1 spec commit; no test regressions and finalizes in eth2_network_simulation
* with BLS 0.10/0.11 available, stop skipping attester slashing, proposer slashing, and voluntary exist operations fixture tests
* switch param orders to group state.{fork, genesis_validators_root}; bump spec/datatypes spec version for network purposes
* mark attestation construction and broadcast and some minimal/mainnet constants as 0.11.1-compatible; remove phase 1 sharding constants from minimal which don't exist in that preset
* complete (except for get_domain(...)) 0.11.0 beacon chain spec update
* mark compute_start_slot_at_epoch(...), is_active_validator(...), compute_signing_root(...), and get_seed(...) as 0.11.0
* update to 0.10.1
* SSZ Generic and nbench uses the v0.10.1 fixtures
* Tests + spec links: v0.10.0 -> v0.10.1
* Add v0.10.1 TODO in get_latest_attesting_balance (forkchoice)
* SSZ Bytes are now ByteList
* Remove nim-result submodules that was leftover/added by mistake in the branch
* update get_seed(...) and get_beacon_proposer_index(...) to 0.9.0, implement compute_proposer_index(...), and render 3 more test fixtures working
* rm stray Crosslink reference which prevented static SSZ tests from building
* remove references to removed tests in attestations test fixture; add minimal-preset block sanity test, plus all but one of mainnet tests for block sanity to transition fixtures
* rename compute_epoch_of_slot(...) to compute_epoch_at_slot(...)
* remove some unnecessary imports; remove some crosslink-related code and tests; complete renaming of compute_epoch_of_slot(...) to compute_epoch_at_slot(...)
* rm more transfer-related code and tests; rm more unnecessary strutils imports
* rm remaining unused imports
* remove useless get_empty_per_epoch_cache(...)/compute_start_slot_of_epoch(...) calls
* rename compute_start_slot_of_epoch(...) to compute_start_slot_at_epoch(...)
* rename ACTIVATION_EXIT_DELAY to MAX_SEED_LOOKAHEAD
* update domain types to 0.9.0
* mark AttesterSlashing, IndexedAttestation, AttestationDataAndCustodyBit, DepositData, BeaconBlockHeader, Fork, integer_squareroot(...), and process_voluntary_exit(...) as 0.9.0
* mark increase_balance(...), decrease_balance(...), get_block_root(...), CheckPoint, Deposit, PendingAttestation, HistoricalBatch, is_active_validator(...), and is_slashable_attestation_data(...) as 0.9.0
* mark compute_activation_exit_epoch(...), bls_verify(...), Validator, get_active_validator_indices(...), get_current_epoch(...), get_total_active_balance(...), and get_previous_epoch(...) as 0.9.0
* mark get_block_root_at_slot(...), ProposerSlashing, get_domain(...), VoluntaryExit, mainnet preset Gwei values, minimal preset max operations, process_block_header(...), and is_slashable_validator(...) as 0.9.0
* mark makeWithdrawalCredentials(...), get_validator_churn_limit(...), get_total_balance(...), is_valid_indexed_attestation(...), bls_aggregate_pubkeys(...), initial genesis value/constants, Attestation, get_randao_mix(...), mainnet preset max operations per block constants, minimal preset Gwei values and time parameters, process_eth1_data(...), get_shuffled_seq(...), compute_committee(...), and process_slots(...) as 0.9.0; partially update get_indexed_attestation(...) to 0.9.0 by removing crosslink refs and associated tests
* mark initiate_validator_exit(...), process_registry_updates(...), BeaconBlock, Eth1Data, compute_domain(...), process_randao(...), process_attester_slashing(...), get_base_reward(...), and process_slot(...) as 0.9.0
* add interop launcher scripts
* stick validator_keygen into beacon_node
* fix lmd ghost slot number on missing block
* use mocked eth1data when producing blocks
* use bls public key method for withdrawal credentials
* fix deposit domain
* prefer lowercase for a bunch of toHex
* build simulation binary in data folder to avoid data types confusion
* Introduce new mocking proc to replace:
- makeFakeValidatorPrivKey
- hackPrivKey
- getNextBeaconProposerIndex
- addBlock
- makeBlock
* Add comments on datastructure unsynced with the spec
* Add merkle tree constructor and initial mocking for deposits (missing merkle proofs)
* [Mock] Implement sparse merkle tree and merkle proof builder
* [Mocking] Genesis deposits
* Add compact_committees_roots init + mock genesis state
* [Tests] Add first deposit test using the new mocking procedures
* [Tests -deposits] add at and over 32 ETH deposit tests
* [Tests - deposits] Add test for validator top-up
* [Tests -deposits] Mention the TODO to test for invalid conditions
* [Tests] Add stub to test "is_valid_genesis_state"
* [Merkle proofs] Implement round-trip checks
* Deactivate roundtrips test
* SSZ - use EF convention for hash_tree_root / hashTreeRoot
* [Tests - Attestation] Attestation mocking + initial test
* Add mocking + 3 new tests for valid attestations + mention future invalid attestation tests
* Add crosslinks test (1 failing to attestations in block being duplicated in state transition)
* Single attestation crosslink test - workaround https://github.com/status-im/nim-beacon-chain/issues/361
* Add test for failed crosslink penalty
* Rebase fixes + add refactored tests to test suite
* justif-finalization helpers first batch
* Add 234 finalization tests
* Fix justif test, Rule I 234 finalization does not happen with sufficient support.
(Also unittest check template does not fail properly in some cases)
* Add tests for all finalization rules
* Properly delete nim-byteutils following c91727e7e5 (diff-7c3613dba5171cb6027c67835dd3b9d4)
* use digest helper for deposit root
Etan Kissling
Jacek Sieka
tersec
Zahary Karadjov
Viktor Kirilov
Mamy André-Ratsimbazafy
Joao Gabriel Carvalho
Mamy Ratsimbazafy