When calling `newPayload` on a >1MB payload (can happen post-merge),
`news` splits up that payload into 1MB chunks. The chunks are each sent
individually, though, with `await` in-between. This means that when we
send concurrent `forkChoiceUpdated` calls, that those may end up getting
in-between the `newPayload` chunks, leading to invalid data being sent.
The EL then returns an error message with a `null` `id` entry (as it
could not read the request `id` due to the mangling) and disconnects.
A PR has been submitted to fix this in `news`, and merged into `status`
branch early as this fix is critical for reliable post-merge operation:
https://github.com/Tormund/news/pull/22
When issuing an engine API call while the EL is disconnected, a `nil`
pointer is dereferenced. Fixed by correctly initializing futures.
```
Traceback (most recent call last, using override)
vendor/nim-libp2p/libp2p/protocols/pubsub/pubsub.nim(890) main
beacon_chain/nimbus_beacon_node.nim(2139) main
beacon_chain/nimbus_beacon_node.nim(0) handleStartUpCmd
beacon_chain/nimbus_beacon_node.nim(0) doRunBeaconNode
beacon_chain/nimbus_beacon_node.nim(0) start
beacon_chain/nimbus_beacon_node.nim(1589) run
vendor/nimbus-build-system/vendor/Nim/lib/system/iterators_1.nim(107) poll
vendor/nim-chronos/chronos/asyncfutures2.nim(365) futureContinue
beacon_chain/consensus_object_pools/consensus_manager.nim(297) updateHeadWithExecution
vendor/nim-chronos/chronos/asyncmacro2.nim(213) runProposalForkchoiceUpdated
vendor/nim-chronos/chronos/asyncfutures2.nim(365) futureContinue
beacon_chain/consensus_object_pools/consensus_manager.nim(259) runProposalForkchoiceUpdated
beacon_chain/eth1/eth1_monitor.nim(0) forkchoiceUpdated
vendor/nim-chronos/chronos/asyncfutures2.nim(219) complete
vendor/nim-chronos/chronos/asyncfutures2.nim(149) cancelled
vendor/nimbus-build-system/vendor/Nim/lib/system/excpt.nim(610) signalHandler
SIGSEGV: Illegal storage access. (Attempt to read from nil?)
```
The optimistic sync spec was updated since the LC based optsync module
was introduced. It is no longer necessary to wait for the justified
checkpoint to have execution enabled; instead, any block is okay to be
optimistically imported to the EL client, as long as its parent block
has execution enabled. Complex syncing logic has been removed, and the
LC optsync module will now follow gossip directly, reducing the latency
when using this module. Note that because this is now based on gossip
instead of using sync manager / request manager, that individual blocks
may be missed. However, EL clients should recover from this by fetching
missing blocks themselves.
When the EL fails to respond to `newPayload`, e.g., because connection
to the EL got interrupted, or due to misconfiguration, optimistic blocks
cannot be imported according to spec. This condition is treated the same
as if the peer returned a block with missing parent which gets the block
out of our processing queue, but can have nasty side effects.
For example, if sync manager asks for validation of a block known to be
in the finalized range, if it receives a `MissingParent` verdict, the
peer is immediately removed from the peer pool.
```
DBG 2022-08-24 11:45:26.874+02:00 newPayload: inserting block into execution engine parentHash=e4ca7424 blockHash=36cdc198 stateRoot=cf3902c1 receiptsRoot=56e81f17 prevRandao=0b49a172 blockNumber=1518089 gasLimit=30000000 gasUsed=0 timestamp=1657980396 extraDataLen=0 baseFeePerGas=7 numTransactions=0
ERR 2022-08-24 11:45:26.875+02:00 newPayload failed msg="Transport is not initialised (missing a call to connect?)"
DBG 2022-08-24 11:45:26.875+02:00 Block pool rejected peer's response topics="syncman" request=187232:32@1475 peer=16U*MsCJdx direction=forward blocks_map=xxxxxxxxxxxxxxxxxxxxxxxxxxxx.xxx blocks_count=31 ok=false unviable=false missing_parent=true sync_ident=main
ERR 2022-08-24 11:45:26.875+02:00 Unexpected missing parent at finalized epoch slot topics="syncman" request=187232:32@1475 peer=16U*MsCJdx direction=forward rewind_to_slot=187232 blocks_count=31 blocks_map=xxxxxxxxxxxxxxxxxxxxxxxxxxxx.xxx sync_ident=main
DBG 2022-08-24 11:45:26.875+02:00 Peer was removed from PeerPool due to low score topics="beacnde" peer=16U*MsCJdx peer_score=-1000 score_low_limit=0 score_high_limit=1000
DBG 2022-08-24 11:45:26.875+02:00 Lost connection to peer topics="networking" peer=16U*MsCJdx connections=0
```
By delaying issuing a verdict until the EL connection is restored and
`newPayload` successfully ran, the problem should be fixed. This also
induces back pressure to the sync manager by stopping download of new
blocks (or re-downloading the same block over and over again).
* Harden block proposal against expired slashings/exits
When a message is signed in a phase0 domain, it can no longer be
validated under bellatrix due to the correct fork no longer being
available in the `BeaconState`.
To ensure that all slashing/exits are still valid, in this PR we re-run
the checks in the state that we're proposing for, thus hardening against
both signatures and other changes in the state that might have
invalidated the message.
* fix same message added multiple times
in case of attestation slashing of multiple validators in one go
* support connecting to peers without bellatrix
Make discovery fork ID aware of scheduled Bellatrix fork to enable
connections to peers that don't have Bellatrix scheduled yet.
Without this, has peering issues with peers on older SW version.
* expand tests with compatibility checks
* more exhaustive compatibility checks
Aligns the default retention policy for LC data with the one for blocks.
Minimum spec requirement for both blocks and LC data is ~5 months.
Additional use cases are better supported by retaining data for longer.
* Fixes a segfault during block production when the Keymanager API
is disabled. The Keymanager is now disabled on half of the local
testnet nodes to catch such problems in the future.
* Fixes multiple potential stalls from REST requests being done
without a timeout. From practice, we know that such requests
can hang forever if not cancelled with a timeout. At best,
this would be a resource leak, at worst, it may lead to a
full stall of the client and missed validator duties.
* Changes some Options usages to Opt (for easier use of valueOr)
When the client was started without any validators, the doppelganger
detection structures were never initialized properly. Later, when
validators were added through the Keymanager API, they interacted
with the uninitialized doppelganger detection structures and their
duties were inappropriately skipped.
* Keymanager API for the validator client
* Properly treat the 'description' field as optional when loading Keystores
* Spec-compliant serialization of the slashing data in Keymanager's DeleteKeys response ()
Fixes#3940Fixes#3964Closes#3884 by adding test
In order to avoid full replays when validating attestations hailing from
untaken forks, it's better to keep shufflings separate from `EpochRef`
and perform a lookahead on the shuffling when processing the block that
determines them.
This also helps performance in the case where REST clients are trying to
perform lookahead on attestation duties and decreases memory usage by
sharing shufflings between EpochRef instances of the same dependent
root.
Now that the 1.2.0-rc.2 spec contains the same `LightClientUpdate`
definition that Nimbus was already using before, the corresponding
SSZ test vectors can be re-enabled.
* packaging updates
* one package per binary (nimbus_beacon_node, nimbus_validator_client)
* use `-` in package name (`_` is separating the version)
* don't include (un)installation scripts in package
* default metrics port 8108 for vc
* fix several upgrade/install errors in scripts
* add JWT option to service files
* don't attempt to remove user on purge
* reorganise navigation menus
* update light client guide with comparison table
* add suggested fee recipient and JWT secrets to the merge guide
* add some background info to book readme
* add JWT docs
also limit toc to make it displayable with substeps.
* import EL deposits even when EL is stuck
The `eth1_monitor` only starts importing deposits once the EL reports a
new head block. However, the EL may be stuck at a block, e.g., the TTD.
By polling the latest EL block once after subscribing to new EL block
events it is ensured that deposits are still imported in this situation.
* also poll once on re-connects
* update `eth1_latest_head` metric in poll mode
* add comment about similar polling vs events parts
* replace check with assert
* `isNewLastBlock` helper
Etan Kissling
dependabot[bot]
Jacek Sieka
tersec
Zahary Karadjov
Eugene Kabanov
Nikolay Mitev
Miran