Just the variable, not yet `lcDataForkAtStateFork` / `atStateFork`.
- Shorten comment in `light_client.nim` to keep line width
- Do not rename `stateFork` mention in `runProposalForkchoiceUpdated`.
- Do not rename `stateFork` in `getStateField(dag.headState, fork)`
Rest is just a mechanical mass replace
* Support for driving multiple EL nodes from a single Nimbus BN
Full list of changes:
* Eth1Monitor has been renamed to ELManager to match its current
responsibilities better.
* The ELManager is no longer optional in the code (it won't have
a nil value under any circumstances).
* The support for subscribing for headers was removed as it only
worked with WebSockets and contributed significant complexity
while bringing only a very minor advantage.
* The `--web3-url` parameter has been deprecated in favor of a
new `--el` parameter. The new parameter has a reasonable default
value and supports specifying a different JWT for each connection.
Each connection can also be configured with a different set of
responsibilities (e.g. download deposits, validate blocks and/or
produce blocks). On the command-line, these properties can be
configured through URL properties stored in the #anchor part of
the URL. In TOML files, they come with a very natural syntax
(althrough the URL scheme is also supported).
* The previously scattered EL-related state and logic is now moved
to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim`
in a follow-up commit). State is assigned properly either to the
`ELManager` or the to individual `ELConnection` objects where
appropriate.
The ELManager executes all Engine API requests against all attached
EL nodes, in parallel. It compares their results and if there is a
disagreement regarding the validity of a certain payload, this is
detected and the beacon node is protected from publishing a block
with a potential execution layer consensus bug in it.
The BN provides metrics per EL node for the number of successful or
failed requests for each type Engine API requests. If an EL node
goes offline and connectivity is resoted later, we report the
problem and the remedy in edge-triggered fashion.
* More progress towards implementing Deneb block production in the VC
and comparing the value of blocks produced by the EL and the builder
API.
* Adds a Makefile target for the zhejiang testnet
* Fix issue when VC unable to detect errors properly and act accordingly.
Switch all API functions used by VC to RestPlainResponse, this allows us to print errors returned by BN servers.
* Fix issue when prepareBeaconCommitteeSubnet() do not perform actions when BN is optimistically synced only.
* Fix Defect issue.
* Fix submit/publish returning `false` when operation was successful.
* Address review comments.
* Fix some client calls unable to receive `execution_optimistic` field, mark BN as OptSynced when such request has been made.
* Adjust warning levels.
---------
Co-authored-by: Jacek Sieka <jacek@status.im>
* fix REST liveness endpoint responding even when gossip is not enabled
* fix VC exit code on doppelganger hit
* fix activation epoch not being updated correctly on long deposit
queues
* fix activation epoch being set incorrectly when updating validator
* move most implementation logic to `validator_pool`, add tests
* ensure consistent logging between VC and BN
* add docs
Since the sync committee duties are no longer updated on every slot
and previously the sync committee aggregators selection proofs were
generated during the duties update, this now resulted in the client
using stale selection proofs (they must be generated at each slot).
The fix consists of moving the selection proof generation logic in
a different function which is properly executed on each slot.
Other changes:
* The logtrace tool has been enhanced with a framework for adding
new simpler log aggregation and analysis algorithms.
The default CI testnet simulation will now ensure that the blocks
in the network have reasonable sync committee participation.
* implement several capellaImplementationMissing points
* don't register validator activity for not-active validators
* don't check validator indices already coming out of committees which exist; must be active validators, or else other deeper bugs
* move duty tracking code to `ActionTracker`
* fix earlier duties overwriting later ones
* re-run subnet selection when new duty appears
* log upcoming duties as soon as they're known (vs 4 epochs before)
* more efficient forkchoiceUpdated usage
* await rather than asyncSpawn; ensure head update before dag.updateHead
* use action tracker rather than attached validators to check for next slot proposal; use wall slot + 1 rather than state slot + 1 to correctly check when missing blocks
* re-add two-fcU case for when newPayload not VALID
* check dynamicFeeRecipientsStore for potential proposal
* remove duplicate checks for whether next proposer
In order to avoid full replays when validating attestations hailing from
untaken forks, it's better to keep shufflings separate from `EpochRef`
and perform a lookahead on the shuffling when processing the block that
determines them.
This also helps performance in the case where REST clients are trying to
perform lookahead on attestation duties and decreases memory usage by
sharing shufflings between EpochRef instances of the same dependent
root.
Whether new blocks/attestations/etc are produced internally or received
via REST, their journey through the node is the same - to ensure that
they get the same treatment (logging, metrics, processing), this PR
moves the routing to a dedicated module and fixes several small
differences that existed before.
* `xxxValidator` -> `processMessageName` - the processor also was adding
messages to pools, so we want the name to reflect that action
* add missing "sent" metrics for some messages
* document ignore policy better - already-seen messages are not actaully
rebroadcast by libp2p
* skip redundant signature checks for internal validators consistently
* optimistic sync
* flag that initially loaded blocks from database might need execution block root filled in
* return optimistic status in REST calls
* refactor blockslot pruning
* ensure beacon_blocks_by_{root,range} do not provide optimistic blocks
* handle forkchoice head being pre-merge with block being postmerge
* re-enable blocking head updates on validator duties
* fix is_optimistic_candidate_block per spec; don't crash with nil future
* fix is_optimistic_candidate_block per spec; don't crash with nil future
* mark blocks sans execution payloads valid during head update
* Initial commit
* Make `events` API spec compliant.
* Add `Eth-Consensus-Version` in responses.
* Bump chronos to get redirect with headers working.
* Add `is_optimistic` field and handling to syncing RestSyncInfo.
* SSZ `[]` -> `mitem`
* `[]` -> `item`
immutable access via mutable instance cannot rely on template
overloading, and `[]` cannot be a `func` because of special seq handling
in compiler.
Other changes:
* logtrace can now verify sync committee messages and contributions
* Many unnecessary use of pairs() have been removed for consistency
* Map 40x BN response codes to BeaconNodeStatus.Incompatible in the VC
* harden validator API against pre-finalized slot requests
* check `syncHorizon` when responding to validator api requests too far
from `head`
* limit state-id based requests to one epoch ahead of `head`
* put historic data bounds on block/attestation/etc validator production API, preventing them from being used with already-finalized slots
* add validator block smoke tests
* make rest test create a new genesis with the tests running roughly in
the first epoch to allow testing a few more boundary conditions
Up til now, the block dag has been using `BlockRef`, a structure adapted
for a full DAG, to represent all of chain history. This is a correct and
simple design, but does not exploit the linearity of the chain once
parts of it finalize.
By pruning the in-memory `BlockRef` structure at finalization, we save,
at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory
landing us at a steady state of ~750mb normal memory usage for a
validating node.
Above all though, we prevent memory usage from growing proportionally
with the length of the chain, something that would not be sustainable
over time - instead, the steady state memory usage is roughly
determined by the validator set size which grows much more slowly. With
these changes, the core should remain sustainable memory-wise post-merge
all the way to withdrawals (when the validator set is expected to grow).
In-memory indices are still used for the "hot" unfinalized portion of
the chain - this ensure that consensus performance remains unchanged.
What changes is that for historical access, we use a db-based linear
slot index which is cache-and-disk-friendly, keeping the cost for
accessing historical data at a similar level as before, achieving the
savings at no percievable cost to functionality or performance.
A nice collateral benefit is the almost-instant startup since we no
longer load any large indicies at dag init.
The cost of this functionality instead can be found in the complexity of
having to deal with two ways of traversing the chain - by `BlockRef` and
by slot.
* use `BlockId` instead of `BlockRef` where finalized / historical data
may be required
* simplify clearance pre-advancement
* remove dag.finalizedBlocks (~50:ish mb)
* remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead
* `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef`
instance, unlike `BlockRef` traversal
* prune `BlockRef` parents on finality (~200:ish mb)
* speed up ChainDAG init by not loading finalized history index
* mess up light client server error handling - this need revisiting :)
One more step on the journey to reduce `BlockRef` usage across the
codebase - this one gets rid of `StateData` whose job was to keep track
of which block was last assigned to a state - these duties have now been
taken over by `latest_block_root`, a fairly recent addition that
computes this block root from state data (at a small cost that should be
insignificant)
99% mechanical change.
* fewer deps on `BlockRef` traversal in anticipation of pruning
* allows identifying EpochRef:s by their shuffling as a first step of
* tighten error handling around missing blocks
using the zero hash for signalling "missing block" is fragile and easy
to miss - with checkpoint sync now, and pruning in the future, missing
blocks become "normal".
* limit by-root requests to non-finalized blocks
Presently, we keep a mapping from block root to `BlockRef` in memory -
this has simplified reasoning about the dag, but is not sustainable with
the chain growing.
We can distinguish between two cases where by-root access is useful:
* unfinalized blocks - this is where the beacon chain is operating
generally, by validating incoming data as interesting for future fork
choice decisions - bounded by the length of the unfinalized period
* finalized blocks - historical access in the REST API etc - no bounds,
really
In this PR, we limit the by-root block index to the first use case:
finalized chain data can more efficiently be addressed by slot number.
Future work includes:
* limiting the `BlockRef` horizon in general - each instance is 40
bytes+overhead which adds up - this needs further refactoring to deal
with the tail vs state problem
* persisting the finalized slot-to-hash index - this one also keeps
growing unbounded (albeit slowly)
Anyway, this PR easily shaves ~128mb of memory usage at the time of
writing.
* No longer honor `BeaconBlocksByRoot` requests outside of the
non-finalized period - previously, Nimbus would generously return any
block through this libp2p request - per the spec, finalized blocks
should be fetched via `BeaconBlocksByRange` instead.
* return `Opt[BlockRef]` instead of `nil` when blocks can't be found -
this becomes a lot more common now and thus deserves more attention
* `dag.blocks` -> `dag.forkBlocks` - this index only carries unfinalized
blocks from now - `finalizedBlocks` covers the other `BlockRef`
instances
* in backfill, verify that the last backfilled block leads back to
genesis, or panic
* add backfill timings to log
* fix missing check that `BlockRef` block can be fetched with
`getForkedBlock` reliably
* shortcut doppelganger check when feature is not enabled
* in REST/JSON-RPC, fetch blocks without involving `BlockRef`
* fix dag.blocks ref
Using the wrong type here causes requests to fail due to the overly
zealous parameter validation - the failure is harmless in the current
duty subscription model, but would have caused more serious failures
down the line.
Time in the beacon chain is expressed relative to the genesis time -
this PR creates a `beacon_time` module that collects helpers and
utilities for dealing the time units - the new module does not deal with
actual wall time (that's remains in `beacon_clock`).
Collecting the time related stuff in one place makes it easier to find,
avoids some circular imports and allows more easily identifying the code
actually needs wall time to operate.
* move genesis-time-related functionality into `spec/beacon_time`
* avoid using `chronos.Duration` for time differences - it does not
support negative values (such as when something happens earlier than it
should)
* saturate conversions between `FAR_FUTURE_XXX`, so as to avoid
overflows
* fix delay reporting in validator client so it uses the expected
deadline of the slot, not "closest wall slot"
* simplify looping over the slots of an epoch
* `compute_start_slot_at_epoch` -> `start_slot`
* `compute_epoch_at_slot` -> `epoch`
A follow-up PR will (likely) introduce saturating arithmetic for the
time units - this is merely code moves, renames and fixing of small
bugs.
* Harden CommitteeIndex, SubnetId, SyncSubcommitteeIndex
Harden the use of `CommitteeIndex` et al to prevent future issues by
using a distinct type, then validating before use in several cases -
datatypes in spec are kept simple though so that invalid data still can
be read.
* fix invalid epoch used in REST
`/eth/v1/beacon/states/{state_id}/committees` committee length (could
return invalid data)
* normalize some variable names
* normalize committee index loops
* fix `RestAttesterDuty` to use `uint64` for `validator_committee_index`
* validate `CommitteeIndex` on ingress in REST API
* update rest rules with stricter parsing
* better REST serializers
* save lots of memory by not using `zip` ...at least a few bytes!
* REST cleanups
* reject out-of-range committee requests
* print all hex values as lower-case
* allow requesting state information by head state root
* turn `DomainType` into array (follow spec)
* `uint_to_bytesXX` -> `uint_to_bytes` (follow spec)
* fix wrong dependent root in `/eth/v1/validator/duties/proposer/`
* update documentation - `--subscribe-all-subnets` is no longer needed
when using the REST interface with validator clients
* more fixes
* common helpers for dependent block
* remove test rules obsoleted by more strict epoch tests
* fix trailing commas
* Update docs/the_nimbus_book/src/rest-api.md
* Update docs/the_nimbus_book/src/rest-api.md
Co-authored-by: sacha <sacha@status.im>
* support downloading blocks / states via JSON in addition to SSZ -
slow, but needed for infura support - SSZ is still used when server
supports it
* use common forked block/state reader in REST API
* fix stack overflows in REST JSON decoder
* fix invalid serialization of `justification_bits` in
`/eth/v1/debug/beacon/states` and `/eth/v2/debug/beacon/states`
* fix REST client to use `/eth/...` instead of `/api/eth/...`, update
"default" urls to expose REST api via `/eth` as well as this is what the
standard says - `/api` was added early on based on an example "base url"
in the spec that has been removed since
* expose Nimbus REST extensions via `/nimbus` in addition to
`/api/nimbus` to stay consistent with `/eth`
* fix invalid state root when reading states via REST
* fix recursive imports in `spec/ssz_codec`
* remove usages of `serialization.useCustomSerialization` - fickle
With checkpoint sync in particular, and state pruning in the future,
loading states or state-dependent data may fail. This PR adjusts the
code to allow this to be handled gracefully.
In particular, the new availability assumption is that states are always
available for the finalized checkpoint and newer, but may fail for
anything older.
The `tail` remains the point where state loading de-facto fails, meaning
that between the tail and the finalized checkpoint, we can still get
historical data (but code should be prepared to handle this as an
error).
However, to harden the code against long replays, several operations
which are assumed to work only with non-final data (such as gossip
verification and validator duties) now limit their search horizon to
post-finalized data.
* harden several state-dependent operations by logging an error instead
of introducing a panic when state loading fails
* `withState` -> `withUpdatedState` to differentiate from the other
`withState`
* `updateStateData` can now fail if no state is found in database - it
is also hardened against excessively long replays
* `getEpochRef` can now fail when replay fails
* reject blocks with invalid target root - they would be ignored
previously
* fix recursion bug in `isProposed`
* Fix REST some rest call signatures and implement a simple API benchmark tool
* Implement #3129 (Optimized history traversals in the REST API)
Other notable changes:
The `updateStateData` procedure in the `blockchain_dag.nim` module is
optimized to not rewind down to the last snapshot state saved in the
database if the supplied input state can be used as a starting point
instead.
* Disallow await in withStateForBlockSlot
Validator monitoring based on and mostly compatible with the
implementation in Lighthouse - tracks additional logs and metrics for
specified validators so as to stay on top on performance.
The implementation works more or less the following way:
* Validator pubkeys are singled out for monitoring - these can be
running on the node or not
* For every action that the validator takes, we record steps in the
process such as messages being seen on the network or published in the
API
* When the dust settles at the end of an epoch, we report the
information from one epoch before that, which coincides with the
balances being updated - this is a tradeoff between being correct
(waiting for finalization) and providing relevant information in a
timely manner)
* Introduce slot->BlockRef mapping for finalized chain
The finalized chain is linear, thus we can use a seq to lookup blocks by
slot number.
Here, we introduce such a seq, even though in the future, it should
likely be backed by a database structure instead, or, more likely, a
flat era file with a flat lookup index.
This dramatically speeds up requests by slot, such as those coming from
the REST interface or GetBlocksByRange, as these are currently served by
a linear iteration from head.
* fix REST block requests to not return blocks from an earlier slot when
the given slot is empty
* fix StateId interpretation such that it doesn't treat state roots as
block roots
* don't load full block from database just to return its root
* Support starting from altair
* hide `finalized-checkpoint-` - they are incomplete and usage may cause
crashes
* remove genesis detection code (broken, obsolete)
* enable starting ChainDAG from altair checkpoints - this is a
prerequisite for checkpoint sync (TODO: backfill)
* tighten checkpoint state conditions
* show error when starting from checkpoint with existing database (not
supported)
* print rest-compatible JSON in ncli/state_sim
* altair/merge support in ncli
* more altair/merge support in ncli_db
* pre-load header to speed up loading
* fix forked block decoding
* Address review comments in #3057
* reorder imports in rest_utils
maybe this will help with the mysterious serialization issues
Co-authored-by: Jacek Sieka <jacek@status.im>
According to the spec, this call should return the positions of
the specified validators within the sync committee. The existing
code was instead returning the indices of the sync sub-committees
where the validator is a member.
* Add `child_id` field.
* Fix json-rpc api call and bump chronos.
* Bump chronos master and fix compilation warnings.
* One more bump of `chronos`.
* add random import
* export rest_utils a bit more
Co-authored-by: Jacek Sieka <jacek@status.im>
* register vc duties with subnet tracker
* fix activation logging during startup
* cache slot signature to avoid duplicate signature work
* schedule aggregation duties one slot at a time to avoid CPU spike at
each epoch
* lower aggregation subnet pre-subscription time to 4 slots (lowers
bandwidth and CPU usage)
* update stability subnets in ENR on startup
* log gossip state
* perform gossip subscriptions just before the next slot starts
* document stuff
* add random include
* don't overwrite subscription state when not subscribed
* log target gossip state
* updating gossip status once is enough
* add test
* remove syncQueueLen - this one is not updated at the end of the sync
and may cause gossip to disconnect itself completely - use a simple head
distance instead
* fix gossip disconnection - if in hysteresis, node.gossipState will be
set to disabled even though we don't disable topic subscriptions
* fix extra duty registration call
* Initial commit.
* Fix path.
* Add validator keys to indices cache mechanism.
Move syncComitteeParticipants to common place.
* Fix sync participants order issue.
* Fix error code when state could not be found.
Refactor `state/validators` to use keysToIndices mechanism.
* Fix RestValidatorIndex to ValidatorIndex conversion TODOs.
* Address review comments.
* Fix REST test rules.
There are still a few cases with manual loops through sync subcommittees
even though an `allSyncCommittees` iterator exists. Adjusted the few
remaining instances to also use the iterator instead.
* cleanups
* use ForkedTrustedSignedBeaconBlock.ionit where appropriate
* move `is_aggregator` to `spec/`
* use `errReject` in a few more places
* update enr fork id when time is auspicious
* use network broadcast functions
* Return Ignore for aggregate signature validation timeouts
...consistently between aggregates and attestations.
* clean up some more reject/ignore rules
* shorten texts a bit
* errReject->checkedReject, use err helpers throughout
* get rid of quarantine in exitpool as well
* Fix getForkSchedule call.
Create cache of all configuration endpoints at node startup.
Add prepareJsonResponse() call to create cached responses.
Mark all procedures with `raises`.
* Add getForkSchedule to VC.
Fix getForkSchedule return type for API.
More `raises` annotations.
Fix VC fork_service.nim.
* Use `push raises` instead of inline `raises`.
* Improvements for REST API aggregated attestations and attestations processing.
* Rename eth2_network.sendXXX procedures to eth2_network.broadcastXXX.
Add broadcastBeaconBlock() and broadcastAggregateAndProof().
Fix links to specification in REST API declarations.
Add implementation for v2 getStateV2().
Add validator_duties.sendXXX procedures which not only broadcast data, but also validate it.
Fix JSON-RPC/REST to use new validator_duties.sendXXX procedures instead of own implementations.
* Fix validator_client online nodes count incorrect value.
Fix aggregate and proof attestation could be sent too late.
* Adding timeout for block wait in attestations processing.
Fix compilation errors.
* Attempt to debug aggregate and proofs.
* Fix Beacon AIP to use `sendAttestation`.
Add link comment to produceBlockV2.
* Add debug logs before publish operation for blocks, attestations and aggregated attestations.
Fix attestations publishing issue.
* logging fixes
`indexInCommnittee` already logged in attestation
Co-authored-by: Jacek Sieka <jacek@status.im>
* reorganize ssz dependencies
This PR continues the work in
https://github.com/status-im/nimbus-eth2/pull/2646,
https://github.com/status-im/nimbus-eth2/pull/2779 as well as past
issues with serialization and type, to disentangle SSZ from eth2 and at
the same time simplify imports and exports with a structured approach.
The principal idea here is that when a library wants to introduce SSZ
support, they do so via 3 files:
* `ssz_codecs` which imports and reexports `codecs` - this covers the
basic byte conversions and ensures no overloads get lost
* `xxx_merkleization` imports and exports `merkleization` to specialize
and get access to `hash_tree_root` and friends
* `xxx_ssz_serialization` imports and exports `ssz_serialization` to
specialize ssz for a specific library
Those that need to interact with SSZ always import the `xxx_` versions
of the modules and never `ssz` itself so as to keep imports simple and
safe.
This is similar to how the REST / JSON-RPC serializers are structured in
that someone wanting to serialize spec types to REST-JSON will import
`eth2_rest_serialization` and nothing else.
* split up ssz into a core library that is independendent of eth2 types
* rename `bytes_reader` to `codec` to highlight that it contains coding
and decoding of bytes and native ssz types
* remove tricky List init overload that causes compile issues
* get rid of top-level ssz import
* reenable merkleization tests
* move some "standard" json serializers to spec
* remove `ValidatorIndex` serialization for now
* remove test_ssz_merkleization
* add tests for over/underlong byte sequences
* fix broken seq[byte] test - seq[byte] is not an SSZ type
There are a few things this PR doesn't solve:
* like #2646 this PR is weak on how to handle root and other
dontSerialize fields that "sometimes" should be computed - the same
problem appears in REST / JSON-RPC etc
* Fix a build problem on macOS
* Another way to fix the macOS builds
Co-authored-by: Zahary Karadjov <zahary@gmail.com>
The spec imports are a mess to work with, so this branch cleans them up
a bit to ensure that we avoid generic sandwitches and that importing
stuff generally becomes easier.
* reexport crypto/digest/presets because these are part of the public
symbol set of the rest of the spec types
* don't export `merge` types from `base` - this causes circular deps
* fix circular deps in `ssz/spec_types` - this is the first step in
disentangling ssz from spec
* be explicit about phase0 vs altair - longer term, `altair` will become
the "natural" type set, then merge and so on, so no point in giving
`phase0` special preferential treatment
Simpler module name for stuff that covers forks
* check that runtime config matches database state
* also include some assorted altair cleanups
* use "standard" genesis fork in local testnet to work around missing
runtime config support
This refactoring puts the JSON-RPC and REST APIs on more equal footing
by renaming and moving things around, creating a separation between
client and server, and documenting what they are - the aim is to have a
simple-to-use base to start from when developing API clients, as well as
make it easier to navigate the code when looking for the legacy JSON-RPC
interface vs the new REST API.
* move REST client, serialization and supporting types to spec/eth2_apis
* REST stuff now starts with `rest_`, JSON-RPC stuff starts with `rpc_`,
more or less
* simplify imports such that there's a simple module to import for both
server and client
* map REST type and proc names to yaml spec more closely - in
particular, reuse operation and type names in `rest_types` to make
comparisons against spec more easy
* cleaner separation between client and server modules - modules common
between server and client such as `rest_types` and serialization move to
the spec folder - this allows the client to be built with less knowledge
about server internals
Etan Kissling
zah
tersec
Eugene Kabanov
Jacek Sieka
Michael Sproul
zah
Emil