* Support for driving multiple EL nodes from a single Nimbus BN
Full list of changes:
* Eth1Monitor has been renamed to ELManager to match its current
responsibilities better.
* The ELManager is no longer optional in the code (it won't have
a nil value under any circumstances).
* The support for subscribing for headers was removed as it only
worked with WebSockets and contributed significant complexity
while bringing only a very minor advantage.
* The `--web3-url` parameter has been deprecated in favor of a
new `--el` parameter. The new parameter has a reasonable default
value and supports specifying a different JWT for each connection.
Each connection can also be configured with a different set of
responsibilities (e.g. download deposits, validate blocks and/or
produce blocks). On the command-line, these properties can be
configured through URL properties stored in the #anchor part of
the URL. In TOML files, they come with a very natural syntax
(althrough the URL scheme is also supported).
* The previously scattered EL-related state and logic is now moved
to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim`
in a follow-up commit). State is assigned properly either to the
`ELManager` or the to individual `ELConnection` objects where
appropriate.
The ELManager executes all Engine API requests against all attached
EL nodes, in parallel. It compares their results and if there is a
disagreement regarding the validity of a certain payload, this is
detected and the beacon node is protected from publishing a block
with a potential execution layer consensus bug in it.
The BN provides metrics per EL node for the number of successful or
failed requests for each type Engine API requests. If an EL node
goes offline and connectivity is resoted later, we report the
problem and the remedy in edge-triggered fashion.
* More progress towards implementing Deneb block production in the VC
and comparing the value of blocks produced by the EL and the builder
API.
* Adds a Makefile target for the zhejiang testnet
This commit removes ForkySignedBeaconBlockMaybeBlobs and all
references. I tried to pull that thread only as little as was needed
to get rid of it. Left a placeholder BlobSidecar array (in lieu of
Opt[BlobsSidecar]) in a few places; this will be used as we rebuild
the decoupled implementation.
* Local sim impovements
* Added support for running Capella and EIP-4844 simulations
by downloading the correct version of Geth.
* Added support for using Nimbus remote signer and Web3Signer.
Use 2 out of 3 threshold signing configuration in the mainnet
configuration and regular remote signing in the minimal one.
* The local testnet simulation can now use a payload builder.
This is currently not activated in CI due to lack of automated
procedures for installing third-party relays or builders.
You are adviced to use mergemock for now, but for most realistic
results, we can create a simple builder based on the nimbus-eth1
codebase that will be able to propose transactions from the regular
network mempool.
* Start the simulation from a merged state. This would allow us
to start removing pre-merge functionality such as the gossip
subsciption logic. The commit also removes the merge-forcing
hack installed after the TTD removal.
* Consolidate all the tools used in the local simulation into a
single `ncli_testnet` binary.
Other changes:
Renamed the `EIP_4844_FORK_*` config constants to `DENEB_FORK_*` as
this matches the latest spec and it's already used in the official
Sepolia config.
* eip4844 beacon block proposals
* Don't fetch blobs under minimal preset
@tersec's summary of the issue:
BlobsBundleV1 in the execution API spec assumes a mainnet preset blob
size, where the EIP4844 consensus spec defines
FIELD_ELEMENTS_PER_BLOB: 4 under the minimal preset, which leads to a
Blob having a length of 4 * 32, not 4096 * 32 which BlobsBundleV1
requires.
* Revert unintentional script change
* Refactor block/blobs types
Use type system to enforce invariant that a pre-4844 block cannot have
a sidecar.
* Update beacon_chain/nimbus_beacon_node.nim
Co-authored-by: tersec <tersec@users.noreply.github.com>
* review feedback
Co-authored-by: tersec <tersec@users.noreply.github.com>
Distinguish between those code locations that need to be updated on each
light client data format change, and those others that should generally
be fine, as long as a valid light client object is processed.
The former are tagged with static assert for `LightClientDataFork.high`.
The latter are changed to `lcDataFork > LightClientDataFork.None` to
indicate that they depend only on presence of any valid object.
Also bundled a few minor cleanups and fixes.
Also add `Forky` type for `LightClientStore` and minor fixes / cleanups.
In a future fork, light client data will be extended with execution info
to support more use cases. To anticipate such an upgrade, introduce
`Forky` and `Forked` types, and ready the database schema.
Because the mapping of sync committee periods to fork versions is not
necessarily unique (fork schedule not in sync with period boundaries),
an additional column is added to `period` -> `LightClientUpdate` table.
When not backfilling all the way to genesis (#4421), it becomes more
useful to start rebuilding the historical indices from an arbitrary
starting point.
To rebuild the index from non-genesis, a state and an unbroken block
history is needed - here, we allow loading the state from an era file
and recreating the history from there onwards.
* speed up partial era state loading
* Types and scaffolding for EIP-4844
This commit adds the EIP-4844 spec types, and fills in
scaffolding/boilerplate for the use of these types across the repo.
None of the actual EIP-4844 logic is introduced yet.
This follows the pattern used by @tersec when introducing Capella (#4276).
* use eth2-networks fork
* review feedback: add static check EIP4844_FORK_EPOCH == FAR_FUTURE_EPOCH
* review feedback: remove EIP4844 from /eth/v1/config/spec response
* Cleanup / review feedback
* Fix REST test
The optimistic sync spec was updated since the LC based optsync module
was introduced. It is no longer necessary to wait for the justified
checkpoint to have execution enabled; instead, any block is okay to be
optimistically imported to the EL client, as long as its parent block
has execution enabled. Complex syncing logic has been removed, and the
LC optsync module will now follow gossip directly, reducing the latency
when using this module. Note that because this is now based on gossip
instead of using sync manager / request manager, that individual blocks
may be missed. However, EL clients should recover from this by fetching
missing blocks themselves.
* MEV validator registration
* add nearby canary to detect new beacon chain forks
* remove special MEV graffiti
* web3signer support
* fix trace logging
* Nim 1.2 needs raises Defect
* use template rather than proc in REST JSON parsing
* use --payload-builder-enable and --payload-builder-url
* explicitly default MEV to disabled
* explicitly empty default value for payload builder URL
* revert attestation pool to unstable version
* optimistic sync
* flag that initially loaded blocks from database might need execution block root filled in
* return optimistic status in REST calls
* refactor blockslot pruning
* ensure beacon_blocks_by_{root,range} do not provide optimistic blocks
* handle forkchoice head being pre-merge with block being postmerge
* re-enable blocking head updates on validator duties
* fix is_optimistic_candidate_block per spec; don't crash with nil future
* fix is_optimistic_candidate_block per spec; don't crash with nil future
* mark blocks sans execution payloads valid during head update
* Initial commit
* Make `events` API spec compliant.
* Add `Eth-Consensus-Version` in responses.
* Bump chronos to get redirect with headers working.
* Add `is_optimistic` field and handling to syncing RestSyncInfo.
When launched with `--light-client-enable` the latest blocks are fetched
and optimistic candidate blocks are passed to a callback (log for now).
This helps accelerate syncing in the future (optimistic sync).
Introduces a new library for syncing using libp2p based light client
sync protocol, and adds a new `nimbus_light_client` executable that uses
this library for syncing. The new executable emits log messages when
new beacon block headers are received, and is integrated into testing.
Incorporates the latest changes to the light client sync protocol based
on Devconnect AMS feedback. Note that this breaks compatibility with the
previous prototype, due to changes to data structures and endpoints.
See https://github.com/ethereum/consensus-specs/pull/2802
* Some Web3Signer versions insist replying with text/plain messages
* When reading blocks, the Web3Signer uses upper-case fork identifiers
instead of lower-case identifies like the Beacon API.
Other changes:
* logtrace can now verify sync committee messages and contributions
* Many unnecessary use of pairs() have been removed for consistency
* Map 40x BN response codes to BeaconNodeStatus.Incompatible in the VC
* `gnosis-chain` -> `gnosis`
Use same name as LH/Teku throughout
* fixes#3504
* fixes large stack temporary that can cause crashes during genesis
detection
Some upstream repos still need fixes, but this gets us close enough that
style hints can be enabled by default.
In general, "canonical" spellings are preferred even if they violate
nep-1 - this applies in particular to spec-related stuff like
`genesis_validators_root` which appears throughout the codebase.
The spec implicitly talks about the slot of a block in several places,
and keeping it readily available is useful in a number of context -
might as well put this implicitly refereneced helper in the spec code
directly
Can't apply a phase0 block to a later phase state and vice versa.
Since instantiation has been a topic, pre/post c file size:
```
424K @mspec@sstate_transition.nim.c
892K @mspec@sstate_transition_block.nim.c
```
```
288K @mspec@sstate_transition.nim.c
880K @mspec@sstate_transition_block.nim.c
```
* clean up / document init
* drop `immutable_validators` data (pre-altair)
* document versions where data is first added
* avoid needlessly loading genesis block data on startup
* add a few more internal database consistency checks
* remove duplicate state root lookup on state load
* comment
When node is restarted before backfill has started but after some blocks
have finalized with forward sync, we would not start the backfill.
* also clean up one last `SomeSome`
* Store finalized block roots in database (3s startup)
When the chain has finalized a checkpoint, the history from that point
onwards becomes linear - this is exploited in `.era` files to allow
constant-time by-slot lookups.
In the database, we can do the same by storing finalized block roots in
a simple sparse table indexed by slot, bringing the two representations
closer to each other in terms of conceptual layout and performance.
Doing so has a number of interesting effects:
* mainnet startup time is improved 3-5x (3s on my laptop)
* the _first_ startup might take slightly longer as the new index is
being built - ~10s on the same laptop
* we no longer rely on the beacon block summaries to load the full dag -
this is a lot faster because we no longer have to look up each block by
parent root
* a collateral benefit is that we no longer need to load the full
summaries table into memory - we get the RSS benefits of #3164 without
the CPU hit.
Other random stuff:
* simplify forky block generics
* fix withManyWrites multiple evaluation
* fix validator key cache not being updated properly in chaindag
read-only mode
* drop pre-altair summaries from `kvstore`
* recreate missing summaries from altair+ blocks as well (in case
database has lost some to an involuntary restart)
* print database startup timings in chaindag load log
* avoid allocating superfluos state at startup
* use a recursive sql query to load the summaries of the unfinalized
blocks
This is an alternative take on https://github.com/status-im/nimbus-eth2/pull/3107
that aims for more minimal interventions in the spec modules at the expense of
duplicating more of the spec logic in ncli_db.
Time in the beacon chain is expressed relative to the genesis time -
this PR creates a `beacon_time` module that collects helpers and
utilities for dealing the time units - the new module does not deal with
actual wall time (that's remains in `beacon_clock`).
Collecting the time related stuff in one place makes it easier to find,
avoids some circular imports and allows more easily identifying the code
actually needs wall time to operate.
* move genesis-time-related functionality into `spec/beacon_time`
* avoid using `chronos.Duration` for time differences - it does not
support negative values (such as when something happens earlier than it
should)
* saturate conversions between `FAR_FUTURE_XXX`, so as to avoid
overflows
* fix delay reporting in validator client so it uses the expected
deadline of the slot, not "closest wall slot"
* simplify looping over the slots of an epoch
* `compute_start_slot_at_epoch` -> `start_slot`
* `compute_epoch_at_slot` -> `epoch`
A follow-up PR will (likely) introduce saturating arithmetic for the
time units - this is merely code moves, renames and fixing of small
bugs.
* support downloading blocks / states via JSON in addition to SSZ -
slow, but needed for infura support - SSZ is still used when server
supports it
* use common forked block/state reader in REST API
* fix stack overflows in REST JSON decoder
* fix invalid serialization of `justification_bits` in
`/eth/v1/debug/beacon/states` and `/eth/v2/debug/beacon/states`
* fix REST client to use `/eth/...` instead of `/api/eth/...`, update
"default" urls to expose REST api via `/eth` as well as this is what the
standard says - `/api` was added early on based on an example "base url"
in the spec that has been removed since
* expose Nimbus REST extensions via `/nimbus` in addition to
`/api/nimbus` to stay consistent with `/eth`
* fix invalid state root when reading states via REST
* fix recursive imports in `spec/ssz_codec`
* remove usages of `serialization.useCustomSerialization` - fickle
Makes `readSszForkedTrustedSignedBeaconBlock` consistent with
`readSszForkedHashedBeaconState`, adjusting the length check
to verify the same type that is used for length computation,
and using the same formatting.
* Support starting from altair
* hide `finalized-checkpoint-` - they are incomplete and usage may cause
crashes
* remove genesis detection code (broken, obsolete)
* enable starting ChainDAG from altair checkpoints - this is a
prerequisite for checkpoint sync (TODO: backfill)
* tighten checkpoint state conditions
* show error when starting from checkpoint with existing database (not
supported)
* print rest-compatible JSON in ncli/state_sim
* altair/merge support in ncli
* more altair/merge support in ncli_db
* pre-load header to speed up loading
* fix forked block decoding
* fix stack overflow crash in REST/debug/getStateV2
* introduce `ForkyXxx` for generic type matching of `Xxx` across
branches (SomeHashedBeaconState -> ForkyHashedBeaconState et al) -
`Some` is already used for other types of type classes
* consolidate function naming in BeaconChainDB, use some generics
* import `forks.nim` from other spec modules and move `Forked*` helpers
around to resolve circular imports
* remove `ForkedBeaconState`, use `ForkedHashedBeaconState` throughout
(less data shuffling between the types)
* fix several cases of states being stored on stack in tests, causing
random failures on some platforms
* remove reading json support from ncli - this should be ported to the
rest json reading instead (doesn't currently work because stack sizes)
Similar to the existing `RewardInfo`, this PR adds the infrastructure
needed to export epoch processing information from altair+. Because
accounting is done somewhat differently, the PR uses a fork-specific
object to extrct the information in order to make the cost on the spec
side low.
* RewardInfo -> EpochInfo, ForkedEpochInfo
* use array for computing new sync committee
* avoid repeated total active balance computations in block processing
* simplify proposer index check
* simplify epoch transition tests
* pre-compute base increment and reuse in epoch processing, and a few
other small optimizations
This PR introduces the type and does the heavy lifting in terms of
refactoring - the tools that use the accounting will need separate PR:s
(as well as refinements to the exportred information)
So far, `withState` and `withBlck` templates could only be used to have
convenience access to fork-agnostic BeaconState and BeaconBlock fields.
This patch:
- injects an additional `stateFork` constant that allows to use
`when` expressions to also access Altair and Merge-specific fields.
- introduces a `withStateAndBlck` template to support operating on both
a `BeaconState` and `BeaconBlock` at a time.
- makes sync committee related functions Merge aware.
- changes a couple if-else trees for forks into case statements so that
forgotten future forks are promoted to compile-time errors.
There are a few locations in the code that compare the current epoch to
the various FORK_EPOCH constants and branch off into fork-specific code.
When a new fork is introduced, it is sometimes forgotten to update all
of those branch locations. This patch introduces a compile-time check
that ensures that all branches need to be covered exhaustively. This is
done by replacing if-elif structures with case expressions.
* simplify state fork access pattern
* fixes
* unsafeAddr needs to be dereferenced outside of case for best effect
* remove hash_tree_root of ForkedXxx (doesn't make sense)
* simplify state transition
* fix vc
* readd hash_tree_root(forkedbeaconblock)
* readd htr(fhbs) as well
...and add some protections to not hash the wrong items elsewhere
The current `getStateField` implementation fails at run-time when called
on a post-Altair state. This is improved by replacing the `if` structure
with a `case` expression, which is checked for exhaustive coverage at
compile time. Care is taken to preserve the `unsafeAddr` optimization.
The template `message` extracts fork specific data from a forked block.
However, its current implementation does not compile due to each fork
returning a different type, i.e., the generated `case` code attempts to
return different types from each branch. As the template is unused, it
is safely removed for now.
* Fix getForkSchedule call.
Create cache of all configuration endpoints at node startup.
Add prepareJsonResponse() call to create cached responses.
Mark all procedures with `raises`.
* Add getForkSchedule to VC.
Fix getForkSchedule return type for API.
More `raises` annotations.
Fix VC fork_service.nim.
* Use `push raises` instead of inline `raises`.
* Improvements for REST API aggregated attestations and attestations processing.
* Rename eth2_network.sendXXX procedures to eth2_network.broadcastXXX.
Add broadcastBeaconBlock() and broadcastAggregateAndProof().
Fix links to specification in REST API declarations.
Add implementation for v2 getStateV2().
Add validator_duties.sendXXX procedures which not only broadcast data, but also validate it.
Fix JSON-RPC/REST to use new validator_duties.sendXXX procedures instead of own implementations.
* Fix validator_client online nodes count incorrect value.
Fix aggregate and proof attestation could be sent too late.
* Adding timeout for block wait in attestations processing.
Fix compilation errors.
* Attempt to debug aggregate and proofs.
* Fix Beacon AIP to use `sendAttestation`.
Add link comment to produceBlockV2.
* Add debug logs before publish operation for blocks, attestations and aggregated attestations.
Fix attestations publishing issue.
* logging fixes
`indexInCommnittee` already logged in attestation
Co-authored-by: Jacek Sieka <jacek@status.im>
The spec imports are a mess to work with, so this branch cleans them up
a bit to ensure that we avoid generic sandwitches and that importing
stuff generally becomes easier.
* reexport crypto/digest/presets because these are part of the public
symbol set of the rest of the spec types
* don't export `merge` types from `base` - this causes circular deps
* fix circular deps in `ssz/spec_types` - this is the first step in
disentangling ssz from spec
* be explicit about phase0 vs altair - longer term, `altair` will become
the "natural" type set, then merge and so on, so no point in giving
`phase0` special preferential treatment
Simpler module name for stuff that covers forks
* check that runtime config matches database state
* also include some assorted altair cleanups
* use "standard" genesis fork in local testnet to work around missing
runtime config support
Etan Kissling
zah
tersec
henridf
Jacek Sieka
Eugene Kabanov
Miran
zah