1e51ee1d01
Bump nim-eth
2020-06-05 19:37:42 +03:00
0c78fc39e7
Use the latest LibP2P
2020-06-05 19:34:12 +03:00
32bc4d9096
Use {.push raises.} in spec/datatypes
...
This was an attempt to trigger a previously reported crash, but
everything turned out to be fine.
2020-06-05 19:33:30 +03:00
b22e5b6d1d
Fix #1108 ( #1119 )
2020-06-04 13:32:50 +02:00
56ffb696be
reorder ssz ( #1099 )
...
* reorder ssz
* split into hash_trees and ssz_serialization, roughly, for hashing and
IO
* move bitseqs into ssz (from stew)
* clean up imports
* docs, imports
2020-06-03 15:52:02 +02:00
ef90a45509
Bump testutils
2020-06-01 16:58:28 +03:00
0bcdabfcdf
Detect another invalid SSZ input found through fuzzing
...
The first offset of an SSZ object should always have a fixed constant
value. Otherwise, some unused bytes may appear between the fixed portion
and the dynamic portion.
Please note that this fix shutds down the minimal forward compatibility
currently supported by the SSZ format (and thus, the expected behavior
must be clarified in the SSZ spec).
2020-05-30 14:47:35 +03:00
8d1fb2f3a6
Bump nim-eth to fix 'make witti'
2020-05-29 21:13:58 +03:00
e33c8d9067
Bump nim-eth and accompanying discv5 cleanup ( #1081 )
2020-05-29 12:03:29 +02:00
4b731b266d
bump vendor/nimbus-build-system
2020-05-29 00:18:47 +02:00
49c33f0890
Use v0.12 ready BLS curve
2020-05-28 15:09:56 +00:00
e238e8186c
bumping libp2p to latest master ( #1075 )
2020-05-28 06:38:07 +02:00
489565b5ab
Makefile: small testnet targets refactoring ( #1078 )
2020-05-28 06:28:10 +02:00
47864c7c6c
Fix wrong bump
2020-05-27 20:14:31 +03:00
fe2bcb20d2
Bump modules to fix 'make witti-dev'
2020-05-27 20:13:18 +03:00
28128f4d2f
Add a handler for the Goodbye message
...
The lack of body of `goodbye` in sync_protocol.nim was preventing
the respective LibP2P protocol to be mounted and advertised on the
network.
Adding a body fixes that, but I've also made some changes in the
P2P protocol codegen that will prevent the issue from happening
again (no body is now considered the equivalent of having an empty
body).
2020-05-26 22:17:26 +03:00
b6c9de968f
Fix some build problems and warnings
2020-05-25 20:33:03 +03:00
f41d823d07
Bump modules
2020-05-25 13:41:42 +03:00
833f19e942
Reform the networking layer in order to handle the new stricter SSZ API
2020-05-24 19:00:34 +03:00
f16fb31060
bump vendor/nimbus-build-system
2020-05-22 13:51:37 +00:00
e4173860f0
bump vendor/nimbus-build-system ( #1050 )
...
* bump vendor/nimbus-build-system
* Jenkins: switch to Bash for the "Build" stage
2020-05-21 00:02:05 +02:00
46a99c35f0
bump vendor/nimbus-build-system
2020-05-20 15:55:31 +02:00
202bbbab6c
Bump some modules
2020-05-20 15:51:45 +03:00
52c3ebf631
Fuzzing tests for SSZ
2020-05-20 15:51:45 +03:00
383b22795c
bump submodules ( #1043 )
2020-05-20 06:57:39 +02:00
6c941b1ff7
spec v0.11.3 update
2020-05-19 17:16:55 +00:00
a99977b772
Progress towards #991 ; Enable the distinct ssz.List type
2020-05-19 15:53:03 +03:00
8432932c11
update to spec v0.11.2 to keep compatible with Schlesi ( #1036 )
...
* update to spec v0.11.2 to keep compatible with Schlesi
* update spec/state_transition_epoch spec references to v0.11.2
* bump other spec refs
2020-05-18 23:05:27 +00:00
398166369b
bump libp2p to latest master
2020-05-18 21:51:03 +00:00
6be7d64e8c
bump libp2p ( #1031 )
2020-05-18 10:11:21 +02:00
c232fd0b3d
bump vendor/nimbus-build-system
2020-05-15 14:27:21 +02:00
6c9e2d98a8
bump libp2p
2020-05-14 16:41:19 +03:00
a605c7244e
simplify libp2p snappy
...
* handle a few more exceptions gracefully (in libp2p also)
* unify libp2p varint parsing
* decompress directly into seq
* avoid seq slice
* stop oversized snappy processing earlier (lowers risk)
2020-05-14 16:41:19 +03:00
926d1c546e
updated news, also no longer allowing event handlers to raise anything other than a Defect in the Web3 API
2020-05-14 14:10:26 +03:00
e537ed94d6
Bump some modules
2020-05-13 12:19:58 +03:00
75c1c6a95c
Enable Snappy by default (using LibP2P steams for now)
...
This refactors the newly added Snappy streaming back-ends trying to
make them more similar and to reduce the code duplication to a minimum.
2020-05-13 12:18:42 +03:00
f055fad08a
Make the Snappy FastStreams integration optional by duplicating it for LibP2P streams
2020-05-13 12:18:42 +03:00
7e846a0bce
Implement sszSize
2020-05-13 12:18:42 +03:00
dbe0010504
Bump nim-snappy
2020-05-13 12:18:42 +03:00
15f0153441
Cosmetic improvements
2020-05-13 12:18:42 +03:00
9538b60704
Integrate the async Snappy implementation
2020-05-13 12:18:42 +03:00
a739d7e8d6
Adapt SSZ to the latest FastStreams API
2020-05-13 12:18:42 +03:00
0d1a602cf5
bump libp2p
2020-05-11 21:06:58 +02:00
2d78523423
fix Grafana dashboards ( #1006 )
...
* fix Grafana dashboards
and refactor a couple of scripts
* start.sh: allow running standalone script
2020-05-11 18:35:53 +00:00
fb2e0ddbec
sync fixes ( #1005 )
...
* sync fixes
* fix Status message finalized info
* work around sync starting before initial status exchange
* don't fail block on deposit signature check failure (fixes #989 )
* print ForkDigest and Version nicely
* dump incoming blocks
* fix crash when libp2p peer connection is closed
* update chunk size to 16 to work around missing blocks when syncing
* bump libp2p
* bump libp2p
* better deposit skip message
2020-05-11 18:08:52 +00:00
a7a50824a1
more metrics ( #1004 )
2020-05-11 06:25:49 +00:00
592d6f65c3
bump ( #1001 )
2020-05-09 16:47:14 +02:00
c572f61129
bump vendor/nim-metrics
2020-05-09 01:13:57 +02:00
fc9d6bc1b3
enable SO_REUSEADDR in libp2p transports
2020-05-08 21:50:20 +02:00
3ffd0d7216
Fix gossip messages not delivered. ( #983 )
2020-05-06 15:42:59 +00:00
Zahary Karadjov
Eugene Kabanov
Jacek Sieka
Kim De Mey
Ștefan Talpalaru
Mamy André-Ratsimbazafy
Dmitriy Ryajov
Dustin Brody
Viktor Kirilov