* Tune getLowSubnets
* Also aim for dHigh peers in gossipsub
* Apply suggestions from code review
Co-authored-by: Jacek Sieka <jacek@status.im>
Co-authored-by: Jacek Sieka <jacek@status.im>
* log doppelganger detection when it activates and when it causes missed
duties
* less prominent eth1 sync progress
* log in-progress sync at notice only when actually missing duties
* better detail in replay log
* don't log finalization checkpoints - this is quite verbose when
syncing and already included in "Slot start"
* 3x speedup in snappy compression
oh, the wonders of `copyMem` in `endians2` - speeds up all kinds of
operations like database stores, sending gossip etc.
* endian usage fixes
* support GOSSIP_MAX_SIZE_MERGE-sized blocks; prevent fork choice clock stutter via aggregate attestations
* relay max gossip size to libp2p, use tight uncompressed bounds for fixed-size messages
* Update beacon_chain/networking/eth2_network.nim
Co-authored-by: Jacek Sieka <jacek@status.im>
* Update beacon_chain/networking/eth2_network.nim
Co-authored-by: Jacek Sieka <jacek@status.im>
Co-authored-by: Jacek Sieka <jacek@status.im>
With the right sequence of events (for example a REST request or a
validation), it can happen that the first traversal across a state
checkpoint boundary is done without storing that state on disk - this
causes problens when replaying states, because now states may be missing
from the database.
Here, we simply avoid using the caches when advancing a state that will
go into the database, ensuring that the information lost during caching
always is permanently stored.
* fix recursion bug in `isProposed`
A novel optimisation for attestation and sync committee message
validation: when batching, we look for signatures of the same message
and aggregate these before batch-validating: this results in up to 60%
fewer signature verifications on a busy server, leading to a significant
reduction in CPU usage.
* increase batch size slightly which helps finding more aggregates
* add metrics for batch verification efficiency
* use simple `blsVerify` when there is only one signature to verify in
the batch, avoiding the RNG
* use v1.1.6 test vectors; use BeaconTime instead of Slot in fork choice
* tick through every slot at least once
* use div INTERVALS_PER_SLOT and use precomputed constants of them
* use correct (even if numerically equal) constant
Introduced in #3171, it turns out we can just follow the block headers
to achieve the same effect
* leaves the constant in the code so as to avoid confusion when reading
database that had the constant written (such as the fleet nodes and
other unstable users)
Validator monitoring based on and mostly compatible with the
implementation in Lighthouse - tracks additional logs and metrics for
specified validators so as to stay on top on performance.
The implementation works more or less the following way:
* Validator pubkeys are singled out for monitoring - these can be
running on the node or not
* For every action that the validator takes, we record steps in the
process such as messages being seen on the network or published in the
API
* When the dust settles at the end of an epoch, we report the
information from one epoch before that, which coincides with the
balances being updated - this is a tradeoff between being correct
(waiting for finalization) and providing relevant information in a
timely manner)
* SyncManager cleanups for backfill support
Cleanups, fixes and simplifications, in anticipation of backfill support
for the `SyncManager`:
* reformat sync progress indicator to show time left and % done more
prominently:
* old: `sync="sPssPsssss:2:2.4229:00h57m (2706898)"`
* new: `sync="14d12h31m (0.52%) 1.1378slots/s (wQQQQQDDQQ:1287520)"`
* reset average speed when going out of sync
* pass all block errors to sync manager, including duplicate/unviable
* penalize peers for reporting a head block that is outside of our
expected wall clock time (they're likely on a different network or
trying to disrupt sync)
* remove `SyncFailureKind` (unused)
* remove `inRange` (unused)
* add `Q` for sync queue requests that are in the `SyncQueue` but not
yet in the `BlockProcessor` queue
* update last slot in `SyncQueue` after getting peer status
* fix race condition between `wakeupWaiters` and `resetWait`, where
workers would not be correctly reset if block verification returned a
completed future without event loop
* log syncmanager direction
* Fix ordering issue.
Some of the requests size of which are not equal to `chunkSize` could be processed in wrong order which could lead to sync process freezes.
Co-authored-by: cheatfate <eugene.kabanov@status.im>
PBKDF2 based keystore files are required to have `dklen >= 32`.
This patch ensures that keystores not fulfilling that requirement
are properly rejected.
In the ChainDAG, 3 block pointers are kept: genesis, tail and head. This
PR adds one more block pointer: the backfill block which represents the
block that has been backfilled so far.
When doing a checkpoint sync, a random block is given as starting point
- this is the tail block, and we require that the tail block has a
corresponding state.
When backfilling, we end up with blocks without corresponding states,
hence we cannot use `tail` as a backfill pointer - there is no state.
Nonetheless, we need to keep track of where we are in the backfill
process between restarts, such that we can answer GetBeaconBlocksByRange
requests.
This PR adds the basic support for backfill handling - it needs to be
integrated with backfill sync, and the REST API needs to be adjusted to
take advantage of the new backfilled blocks when responding to certain
requests.
Future work will also enable moving the tail in either direction:
* pruning means moving the tail forward in time and removing states
* backwards means recreating past states from genesis, such that
intermediate states are recreated step by step all the way to the tail -
at that point, tail, genesis and backfill will match up.
* backfilling is done when backfill != genesis - later, this will be the
WSS checkpoint instead
There are multiple copies of `bitseqs` (`nim-stew`, `nim-eth`, and
`nim-ssz-serialization`). To avoid confusion, this patch removes the
final remaining reference of a non-`nim-ssz-serialization` copy.
Makes `readSszForkedTrustedSignedBeaconBlock` consistent with
`readSszForkedHashedBeaconState`, adjusting the length check
to verify the same type that is used for length computation,
and using the same formatting.
* BlockId reform
Introduce `BlockId` that helps track a root/slot pair - this prepares
the codebase for backfilling and handling out-of-dag blocks
* move block dag code to separate module
* fix finalised state root in REST event stream
* fix finalised head computation on head update, when starting from
checkpoint
* clean up chaindag init
* revert `epochAncestor` change in introduced in #3144 that would return
an epoch ancestor from the canoncial history instead of the given
history, causing `EpochRef` keys to point to the wrong block
* batch-verify sync messages for a small perf boost
Generally reuses the same structure as attestation and aggregate
verification
* normalize `signatures` and `signature_batch` to use the same pattern
of verification
* normalize parameter names, order etc for signature stuff in general
* avoid calling `blsSign` directly - instead, go through `signatures`
consistently
This removes some dead code from `getSubcommitteePositionsAux` which is
no longer needed since the introduction of `SyncCommitteeCache`.
This also cleans up some formatting, uses `let` instead of `var` where
possible, and uses implicit `pairs` in one case for consistency.
* Introduce slot->BlockRef mapping for finalized chain
The finalized chain is linear, thus we can use a seq to lookup blocks by
slot number.
Here, we introduce such a seq, even though in the future, it should
likely be backed by a database structure instead, or, more likely, a
flat era file with a flat lookup index.
This dramatically speeds up requests by slot, such as those coming from
the REST interface or GetBlocksByRange, as these are currently served by
a linear iteration from head.
* fix REST block requests to not return blocks from an earlier slot when
the given slot is empty
* fix StateId interpretation such that it doesn't treat state roots as
block roots
* don't load full block from database just to return its root
This PR fixes two issues with block publishing:
* Gossip-valid blocks are published before integrating them into the
chain, giving broadcasting a head start, both for rest block and
* Outright invalid blocks from the API that could lead to the descoring
of the node are no longer broadcast
Bonus:
* remove undocumented and duplicated `post_v1_validator_block` JSON-RPC
call
* move quarantine outside of chaindag
The quarantine has been part of the ChainDAG for the longest time, but
this design has a few issues:
* the function in which blocks are verified and added to the dag becomes
reentrant and therefore difficult to reason about - we're currently
using a stateful flag to work around it
* quarantined blocks bypass the processing queue leading to a processing
stampede
* the quarantine flow is unsuitable for orphaned attestations - these
should also should be quarantined eventually
Instead of processing the quarantine inside ChainDAG, this PR moves
re-queueing to `block_processor` which already is responsible for
dealing with follow-up work when a block is added to the dag
This sets the stage for keeping attestations in the quarantine as well.
Also:
* make `BlockError` `{.pure.}`
* avoid use of `ValidationResult` in block clearance (that's for gossip)
* Add some indicators to help fixing issue.
* Bump presto to help debugging.
* Fix compilation problems in presto.
* Fix SIGSEGV.
* Bump latest changes in chronos and presto.
Fix rare cases in validator_client.
* Use proper commits for chronos and presto.
Used during initial development of the spec, `nbench` has fallen behind
and by and large been superceded by `block_sim`, `state_sim` and
`ncli_db bench`.
Some `LightClientUpdate` documentation of the spec is meant to span
multiple fields but was attached to a single, incorrect field in Nimbus.
This patch moves affected documentation to correct locations.
This allows `blockchain_dag`'s `withState` template to be called more
than once in a single function. This led to a compilation error before
because the injected variables and functions shared the same scope.
Validator clients such as Vouch can be configured to work with multiple
beacon nodes simultaneously. In this configuration, the validator client
will try to broadcast the gossip messages through each of the connected
beacon nodes which may lead to a situation where some of the nodes see a
message arriving from the network before it arrives through the REST API.
This should not be considered an error and the beacon node should still
broadcast the message as the intented purpose of the Vouch strategy is
to ensure that the message will reach as many peers as possible.
Turning uncompressed pubkeys into cooked ones is fast, but unnecessary -
this should avoid a little work for every signature validation we do by
pre-loading them at startup.
* add EF fork choice tests to CI
* checkpoints
* compilation fixes and add test to preset dependent suite
* support longpaths on Windows CI
* skip minimal tests (long paths issue + impl detals tested)
* fix stackoverflow on some platforms
* rebase on top of https://github.com/status-im/nimbus-eth2/pull/3054
* fix stack usage
Renames and cleanups split out from the validator monitoring branch, so
as to reduce conflict area vs other PR:s
* add constants for expected message timing
* name validators after the messages they validate, mostly, to make
grepping easier
* unify field naming of EpochInfo across forks to make cross-fork code
easier
Currently, we don't have a good answer to the question "are we synced
yet" - the sync manager syncs based on the peers it's connected to, but
just because some peer looks like it should be synced from doesn't mean
we're out of sync.
Instead, we use a very silly time-based heuristic - the problem with
that is that the network can go into a rut where nobody produces blocks
- better heuristics would be needed here, but in the meantime, a command
line option can get us out of a tight spot - this PR places such an
option in the client, in the unlikely event it should be needed (most
likely in a testnet).
* ncli_db: add putState, putBlock
These tools allow modifying an existing nimbus database for the purpose
of recovery or reorg, moving the head, tail and genesis to arbitrary
points.
* remove potentially expensive `putState` in `BeaconStateDB`
* introduce `latest_block_root` which computes the root of the latest
applied block from the `latest_block_header` field (instead of passing
it in separately)
* avoid some unnecessary BeaconState copies during init
* discover https://github.com/nim-lang/Nim/issues/19094
* prefer `HashedBeaconState` in a few places to avoid recomputing state
root
* fetch latest block root from state when creating blocks
* harden `get_beacon_proposer_index` against invalid slots and document
* move random spec function tests to `test_spec.nim`
* avoid unnecessary state root computation before block proposal
* Support starting from altair
* hide `finalized-checkpoint-` - they are incomplete and usage may cause
crashes
* remove genesis detection code (broken, obsolete)
* enable starting ChainDAG from altair checkpoints - this is a
prerequisite for checkpoint sync (TODO: backfill)
* tighten checkpoint state conditions
* show error when starting from checkpoint with existing database (not
supported)
* print rest-compatible JSON in ncli/state_sim
* altair/merge support in ncli
* more altair/merge support in ncli_db
* pre-load header to speed up loading
* fix forked block decoding
* Reduce the logging-related breaking changes
* Don't disable the stdout log when the `--log-file` option is used
* Rename `--log-stdout` to `--log-format` and hide it
* Deprecate the `--log-file` option
* Address review comments in #3057
* reorder imports in rest_utils
maybe this will help with the mysterious serialization issues
Co-authored-by: Jacek Sieka <jacek@status.im>
This is a temporary revert of the new logic introduced in
d6cd1cd46c, because it leads
to a memory leak in the Eth1Monitor caused by the lack of
pruning of the Eth1Chain when the validator duties are not
executed.
According to the spec, this call should return the positions of
the specified validators within the sync committee. The existing
code was instead returning the indices of the sync sub-committees
where the validator is a member.
* fix stack overflow crash in REST/debug/getStateV2
* introduce `ForkyXxx` for generic type matching of `Xxx` across
branches (SomeHashedBeaconState -> ForkyHashedBeaconState et al) -
`Some` is already used for other types of type classes
* consolidate function naming in BeaconChainDB, use some generics
* import `forks.nim` from other spec modules and move `Forked*` helpers
around to resolve circular imports
* remove `ForkedBeaconState`, use `ForkedHashedBeaconState` throughout
(less data shuffling between the types)
* fix several cases of states being stored on stack in tests, causing
random failures on some platforms
* remove reading json support from ncli - this should be ported to the
rest json reading instead (doesn't currently work because stack sizes)
The sync committee period used to be a plain `uint64`. With the light
client sync relying more heavily on them, it makes sense to introduce
a proper type for them, similar to how they are already used for `Slot`
and `Epoch`. This introduces such a `SyncCommitteePeriod` type.
Furthermore, some usage code dealing with those periods is cleaned up.
So far, the REST config response did not include all spec constants.
The spec for `/eth/v1/config/spec` defines that the response should
include constants for all hard forks known by the beacon node. This
patch extends the corresponding response to include more constants.
* Logging and startup improvements
Color support for released binaries!
* startup scripts no longer log to file by default - this only affects
source builds - released binaries don't support file logging
* add --log-stdout option to control logging to stdout (colors, json)
* detect tty:s vs redirected logs and log accordingly
* add option to disable log colors at runtime
* simplify several "common" logs, showing the most important information
earlier and more clearly
* remove line numbers / file information / tid - these take up space and
are of little use to end users
* still enabled in debug builds and tools
* remove `testnet_servers_image` compile-time option
* server images, released binaries and compile-from-source now offer
the same behaviour and features
* fixes https://github.com/status-im/nimbus-eth2/issues/2326
* fixes https://github.com/status-im/nimbus-eth2/issues/1794
* remove instanteneous block speed from sync message, keeping only
average
before:
```
INF 2021-10-28 16:45:59.000+02:00 Slot start topics="beacnde" tid=386429 file=nimbus_beacon_node.nim:884 lastSlot=2384027 wallSlot=2384028 delay=461us84ns peers=0 head=75a10ee5:3348 headEpoch=104 finalized=cd6804ba:3264 finalizedEpoch=102 sync="wwwwwwwwww:0:0.0000:0.0000:00h00m (3348)"
INF 2021-10-28 16:45:59.046+02:00 Slot end topics="beacnde" tid=386429 file=nimbus_beacon_node.nim:821 slot=2384028 nextSlot=2384029 head=75a10ee5:3348 headEpoch=104 finalizedHead=cd6804ba:3264 finalizedEpoch=102 nextAttestationSlot=-1 nextProposalSlot=-1 nextActionWait=n/a
```
after:
```
INF 2021-10-28 22:43:23.033+02:00 Slot start topics="beacnde" slot=2385815 epoch=74556 sync="DDPDDPUDDD:10:5.2258:01h19m (2361088)" peers=37 head=eacd2dae:2361096 finalized=73782:a4751487 delay=33ms687us715ns
INF 2021-10-28 22:43:23.291+02:00 Slot end topics="beacnde" slot=2385815 nextActionWait=n/a nextAttestationSlot=-1 nextProposalSlot=-1 head=eacd2dae:2361096
```
* fix comment
* documentation updates
* mention `--log-file` may be deprecated in the future
* update various docs
* Add `child_id` field.
* Fix json-rpc api call and bump chronos.
* Bump chronos master and fix compilation warnings.
* One more bump of `chronos`.
* add random import
* export rest_utils a bit more
Co-authored-by: Jacek Sieka <jacek@status.im>
Spec constants currently use `uint16` instead of `GeneralizedIndex` to
define generalized indices in a merkle tree. Adjusted to use the latter
instead to avoid problems when adjusting `GeneralizedIndex`'s bit width.
* auto-bump nim-libp2p
* Remove peer info for other peers
Not definitive, just to test the libp2p's unstable branch
* finish up Remove peer info for other peers
* getKey -> getPublicKey
* bump libp2p
* libp2p bump
Co-authored-by: = <Menduist@users.noreply.github.com>
Co-authored-by: Tanguy <tanguy@status.im>
The validator client was only able to connect to beacon nodes exposing
the exact same set of spec constants that are locally known via their
config/spec REST API. However, that set of spec constants is dynamic.
As the validator client only requires a subset of relevant constants,
this may lead to compatible specs being rejected. This patch widens the
allowed specs by only verifying that the required set of constants are
present in the spec response, ignoring any spec constants that are not
locally known, and ignoring missing spec constants that are locally
known but not included by the remote beacon node when not relevant for
operation of the validator client.
Currently, `ElemType` can only be called on `HashArray`, `HashList` and
`List` types when they are first assigned to a variable called `T`. The
templates have been adjusted so that different variable names may be
used. The templates can now also be applied to in-line computed types,
e.g., `ElemType(typeof(x))`.
* `SyncCommitteeIndex` -> `SyncSubcommitteeIndex`
* `syncCommitteePeriod` -> `sync_committee_period` (spec spelling)
* tighten period comparisons
* fix assert when validating committee message with non-altair state in
REST api
There was a cyrillic T in some big-endian specific code that broke the
compilation on such platforms. This replaces that T with an ASCII T to
fix the build.
* register vc duties with subnet tracker
* fix activation logging during startup
* cache slot signature to avoid duplicate signature work
* schedule aggregation duties one slot at a time to avoid CPU spike at
each epoch
* lower aggregation subnet pre-subscription time to 4 slots (lowers
bandwidth and CPU usage)
* update stability subnets in ENR on startup
* log gossip state
* perform gossip subscriptions just before the next slot starts
* document stuff
* add random include
* don't overwrite subscription state when not subscribed
* log target gossip state
* updating gossip status once is enough
* add test
* remove syncQueueLen - this one is not updated at the end of the sync
and may cause gossip to disconnect itself completely - use a simple head
distance instead
* fix gossip disconnection - if in hysteresis, node.gossipState will be
set to disabled even though we don't disable topic subscriptions
* fix extra duty registration call
* Initial commit.
* Fix path.
* Add validator keys to indices cache mechanism.
Move syncComitteeParticipants to common place.
* Fix sync participants order issue.
* Fix error code when state could not be found.
Refactor `state/validators` to use keysToIndices mechanism.
* Fix RestValidatorIndex to ValidatorIndex conversion TODOs.
* Address review comments.
* Fix REST test rules.
Tanguy
tersec
Jacek Sieka
Zahary Karadjov
Etan Kissling
Eugene Kabanov
Mamy Ratsimbazafy
Kim De Mey
Ștefan Talpalaru
nbc-bump-bot[bot]