Commit Graph

21 Commits

Author SHA1 Message Date
zah 8771e91d53
Support for driving multiple EL nodes from a single Nimbus BN (#4465)
* Support for driving multiple EL nodes from a single Nimbus BN

Full list of changes:

* Eth1Monitor has been renamed to ELManager to match its current
  responsibilities better.

* The ELManager is no longer optional in the code (it won't have
  a nil value under any circumstances).

* The support for subscribing for headers was removed as it only
  worked with WebSockets and contributed significant complexity
  while bringing only a very minor advantage.

* The `--web3-url` parameter has been deprecated in favor of a
  new `--el` parameter. The new parameter has a reasonable default
  value and supports specifying a different JWT for each connection.
  Each connection can also be configured with a different set of
  responsibilities (e.g. download deposits, validate blocks and/or
  produce blocks). On the command-line, these properties can be
  configured through URL properties stored in the #anchor part of
  the URL. In TOML files, they come with a very natural syntax
  (althrough the URL scheme is also supported).

* The previously scattered EL-related state and logic is now moved
  to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim`
  in a follow-up commit). State is assigned properly either to the
  `ELManager` or the to individual `ELConnection` objects where
  appropriate.

  The ELManager executes all Engine API requests against all attached
  EL nodes, in parallel. It compares their results and if there is a
  disagreement regarding the validity of a certain payload, this is
  detected and the beacon node is protected from publishing a block
  with a potential execution layer consensus bug in it.

  The BN provides metrics per EL node for the number of successful or
  failed requests for each type Engine API requests. If an EL node
  goes offline and connectivity is resoted later, we report the
  problem and the remedy in edge-triggered fashion.

* More progress towards implementing Deneb block production in the VC
  and comparing the value of blocks produced by the EL and the builder
  API.

* Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
tersec 07ccd3fa6e
remove capella and deneb empty execution payload fallbacks (#4613) 2023-02-13 19:15:16 +02:00
Etan Kissling 2184fd2322
bump `nim-eth`, extend empty block fallback for EIP4844 (#4425)
Implements `emptyPayloadToBlockHeader` for EIP-4844.
https://github.com/status-im/nim-eth/pull/570
2022-12-20 20:00:56 +01:00
Etan Kissling c91d9d61e2
validate EL block hash in EL simulation (#4420)
When simulating EL with `--optimistic` flag, perform block hash check.
2022-12-20 09:24:33 +01:00
Etan Kissling c941dc801f
bump `nim-eth`, extend empty block fallback for Capella (#4357)
Implements `emptyPayloadToBlockHeader` for Capella.
https://github.com/status-im/nim-eth/pull/562
2022-11-28 14:41:25 +01:00
tersec 1fceb33b2e
more capella (#4350) 2022-11-24 14:38:07 +00:00
Etan Kissling 7ad610f6d7
set fee recipient in empty payload fallback (#4291)
When the EL/Builder fails to produce an execution payload, we fall back
to an empty `ExecutionPayload`. Even though it contains no transactions
it should refer to the configured fee recipient. This is useful for
privacy reasons (do not reveal the reason for the empty payload) and for
compliance with additional fee recipient rules by staking pools.
2022-11-08 14:19:56 +00:00
Etan Kissling aa1b8e4a17
bump nim-ssz-serialization to `3db6cc0f282708aca6c290914488edd832971d61` (#3119)
This updates `nim-ssz-serialization` to
`3db6cc0f282708aca6c290914488edd832971d61`.

Notable changes:
- Use `uint64` for `GeneralizedIndex`
- Add support for building merkle multiproofs
2022-06-26 19:33:06 +02:00
Jacek Sieka 836f6984bb
move `state_transition` to `Result` (#3284)
* better error messages in api
* avoid `BlockData` copies when replaying blocks
2022-01-17 12:19:58 +01:00
Etan Kissling 984dc18dc6
import `is_valid_merkle_branch` test cases from `nim-eth` (#3182)
As of https://github.com/status-im/nim-eth/pull/379 `nim-eth` defines a
couple static test cases for merkle proof verification.
Since the EF has defined a `is_valid_merkle_branch` function in the spec
we are no longer using the custom implementation from `nim-eth`, but the
tests were never ported to target the new implementation. This patch now
follows up on that and integrates those tests from `nim-eth`.
2021-12-10 16:56:26 +01:00
Jacek Sieka c40cc6cec1 clean up fork enum and field names
* single naming strategy
* simplify some fork code
* simplify forked block production
2021-10-19 11:06:38 +03:00
Etan Kissling 05908859b7
support merkle multiproof verification (#2980)
This introduces spec-compatible support to verify merkle multiproofs for
use, e.g., in light client syncing.
2021-10-14 10:28:22 +02:00
Jacek Sieka f90b2b8b1f
reward accounting for altair+ (#2981)
Similar to the existing `RewardInfo`, this PR adds the infrastructure
needed to export epoch processing information from altair+. Because
accounting is done somewhat differently, the PR uses a fork-specific
object to extrct the information in order to make the cost on the spec
side low.

* RewardInfo -> EpochInfo, ForkedEpochInfo
* use array for computing new sync committee
* avoid repeated total active balance computations in block processing
* simplify proposer index check
* simplify epoch transition tests
* pre-compute base increment and reuse in epoch processing, and a few
other small optimizations

This PR introduces the type and does the heavy lifting in terms of
refactoring - the tools that use the accounting will need separate PR:s
(as well as refinements to the exportred information)
2021-10-13 16:24:36 +02:00
Etan Kissling 711c08f804
add function to build merkle proofs (#2874)
Adds a function that constructs a Merkle proof for a generalized index.
This will be used during light client sync to update light clients with
a new state (see NEXT_SYNC_COMMITTEE_INDEX / FINALIZED_ROOT_INDEX).
2021-09-29 15:02:34 +02:00
Jacek Sieka ce49da6c0a
Introduce unittest2 and junit reports (#2522)
* Introduce unittest2 and junit reports

* fix XML path

* don't combine multiple CI runs

* fixup

* public combined report also

Co-authored-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
2021-04-28 18:41:02 +02:00
Zed 6ba7b4b117 Generate markdown test reports 2020-03-13 14:38:59 +00:00
Dustin Brody 570de0839d measure/find slow tests (#624) 2019-12-05 11:27:00 +01:00
Dustin Brody 1494bcc262 replace links to Apache and MIT licenses with HTTPS versions (#592) 2019-11-25 16:30:02 +01:00
Dustin Brody df1d00f13a remove UnusedImport spam (#549)
* remove UnusedImport spam

* re-add random import to beacon_node
2019-11-14 11:47:55 +01:00
Dustin Brody 2e1515b107
0.6.2 updates (#275)
* update process_justification_and_finalization to 0.6.2; mark AttesterSlashing as 0.6.2

* replace get_effective_balance(...) with state.validator_registry[idx].effective_balance; rm get_effective_balance, process_ejections, should_update_validator_registry, update_validator_registry, and update_registry_and_shuffling_data; update get_total_balance to 0.6.2; implement process_registry_updates

* rm exit_validator; implement is_slashable_attestation_data; partly update processAttesterSlashings

* mark HistoricalBatch and Eth1Data as 0.6.2; implement get_shard_delta(...); replace 0.5 finish_epoch_update with 0.6 process_final_updates

* mark increase_balance, decrease_balance, get_delayed_activation_exit_epoch, bls_aggregate_pubkeys, bls_verify_multiple, Attestation, Transfer, slot_to_epoch, Crosslink, get_current_epoch, int_to_bytes*, various constants, processEth1Data, processTransfers, and verifyStateRoot as 0.6.2; rm is_double_vote and is_surround_vote

* mark get_bitfield_bit, verify_bitfield, ProposerSlashing, DepositData, VoluntaryExit, PendingAttestation, Fork, integer_squareroot, get_epoch_start_slot, is_active_validator, generate_seed, some constants to 0.6.2; rename MIN_PENALTY_QUOTIENT to MIN_SLASHING_PENALTY_QUOTIENT

* rm get_previous_total_balance, get_current_epoch_boundary_attestations, get_previous_epoch_boundary_attestations, and get_previous_epoch_matching_head_attestations

* update BeaconState to 0.6.2; simplify legacy get_crosslink_committees_at_slot infrastructure a bit by noting that registry_change is always false; reimplment 0.5 get_crosslink_committees_at_slot in terms of 0.6 get_crosslink_committee

* mark process_deposit(...), get_block_root_at_slot(...), get_block_root(...), Deposit, BeaconBlockHeader, BeaconBlockBody, hash(...), get_active_index_root(...), various constants, get_shard_delta(...), get_epoch_start_shard(...), get_crosslink_committee(...), processRandao(...), processVoluntaryExits(...), cacheState(...) as 0.6.2

* rm removed-since-0.5 split(...), is_power_of_2(...), get_shuffling(...); rm 0.5 versions of get_active_validator_indices and get_epoch_committee_count; add a few tests for integer_squareroot

* mark bytes_to_int(...) and advanceState(...) as 0.6.2

* rm 0.5 get_attesting_indices; update get_attesting_balance to 0.6.2

* another tiny commit to poke AppVeyor to maybe not timeout at connecting to GitHub partway through CI: mark get_churn_limit(...), initiate_validator_exit(...), and Validator as 0.6.2

* mark get_attestation_slot(...), AttestationDataAndCustodyBit, and BeaconBlock as 0.6.2
2019-06-03 10:31:04 +00:00
Jacek Sieka 94756cc5a2
add is_power_of_2 implementation 2018-12-05 07:19:57 -06:00