nimbus-eth2/beacon_chain/el/el_manager.nim

1929 lines
70 KiB
Nim
Raw Normal View History

# beacon_chain
# Copyright (c) 2018-2024 Status Research & Development GmbH
# Licensed and distributed under either of
# * MIT license (license terms in the root directory or at https://opensource.org/licenses/MIT).
# * Apache v2 license (license terms in the root directory or at https://www.apache.org/licenses/LICENSE-2.0).
# at your option. This file may not be copied, modified, or distributed except according to those terms.
{.push raises: [].}
2018-11-26 13:33:06 +00:00
import
std/[strformat, typetraits, json, sequtils],
2020-12-09 22:44:59 +00:00
# Nimble packages:
chronos, metrics, chronicles/timings,
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
json_rpc/[client, errors],
web3, web3/[engine_api, primitives, conversions],
eth/common/eth_types,
results,
kzg4844/[kzg_abi, kzg],
stew/[assign2, byteutils, objects],
2020-12-09 22:44:59 +00:00
# Local modules:
../spec/[eth2_merkleization, forks],
../networking/network_metadata,
".."/beacon_node_status,
"."/[el_conf, engine_api_conversions, eth1_chain]
2018-11-26 13:33:06 +00:00
2022-03-31 14:43:05 +00:00
from std/times import getTime, inSeconds, initTime, `-`
from ../spec/engine_authentication import getSignedIatToken
from ../spec/helpers import bytes_to_uint64
from ../spec/state_transition_block import kzg_commitment_to_versioned_hash
2022-03-31 14:43:05 +00:00
export
eth1_chain, el_conf, engine_api, base
logScope:
topics = "elman"
type
FixedBytes[N: static int] = web3.FixedBytes[N]
PubKeyBytes = DynamicBytes[48, 48]
WithdrawalCredentialsBytes = DynamicBytes[32, 32]
SignatureBytes = DynamicBytes[96, 96]
Int64LeBytes = DynamicBytes[8, 8]
WithoutTimeout* = distinct int
Address = web3.Address
SomeEnginePayloadWithValue =
BellatrixExecutionPayloadWithValue |
GetPayloadV2Response |
GetPayloadV3Response |
GetPayloadV4Response
contract(DepositContract):
proc deposit(pubkey: PubKeyBytes,
withdrawalCredentials: WithdrawalCredentialsBytes,
signature: SignatureBytes,
deposit_data_root: FixedBytes[32])
proc get_deposit_root(): FixedBytes[32]
proc get_deposit_count(): Int64LeBytes
proc DepositEvent(pubkey: PubKeyBytes,
withdrawalCredentials: WithdrawalCredentialsBytes,
amount: Int64LeBytes,
signature: SignatureBytes,
index: Int64LeBytes) {.event.}
const
noTimeout = WithoutTimeout(0)
hasDepositRootChecks = defined(has_deposit_root_checks)
targetBlocksPerLogsRequest = 1000'u64
# TODO
#
# This is currently set to 1000, because this was the default maximum
# value in Besu circa our 22.3.0 release. Previously, we've used 5000,
# but this was effectively forcing the fallback logic in `syncBlockRange`
# to always execute multiple requests before getting a successful response.
#
# Besu have raised this default to 5000 in https://github.com/hyperledger/besu/pull/5209
# which is expected to ship in their next release.
#
# Full deposits sync time with various values for this parameter:
#
# Blocks per request | Geth running on the same host | Geth running on a more distant host
# ----------------------------------------------------------------------------------------
# 1000 | 11m 20s | 22m
# 5000 | 5m 20s | 15m 40s
# 100000 | 4m 10s | not tested
#
# The number of requests scales linearly with the parameter value as you would expect.
#
# These results suggest that it would be reasonable for us to get back to 5000 once the
# Besu release is well-spread within their userbase.
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
# Engine API timeouts
engineApiConnectionTimeout = 5.seconds # How much we wait before giving up connecting to the Engine API
web3RequestsTimeout* = 8.seconds # How much we wait for eth_* requests (e.g. eth_getBlockByHash)
# https://github.com/ethereum/execution-apis/blob/v1.0.0-beta.3/src/engine/paris.md#request-2
# https://github.com/ethereum/execution-apis/blob/v1.0.0-beta.3/src/engine/shanghai.md#request-2
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
GETPAYLOAD_TIMEOUT = 1.seconds
connectionStateChangeHysteresisThreshold = 15
## How many unsuccesful/successful requests we must see
## before declaring the connection as degraded/restored
2018-11-26 13:33:06 +00:00
type
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
NextExpectedPayloadParams* = object
headBlockHash*: Eth2Digest
safeBlockHash*: Eth2Digest
finalizedBlockHash*: Eth2Digest
2023-08-15 23:00:35 +00:00
payloadAttributes*: PayloadAttributesV3
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
ELManagerState* {.pure.} = enum
Running, Closing, Closed
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
ELManager* = ref object
eth1Network: Opt[Eth1Network]
## If this value is supplied the EL manager will check whether
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
## all configured EL nodes are connected to the same network.
depositContractAddress*: Eth1Address
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
depositContractBlockNumber: uint64
depositContractBlockHash: BlockHash
blocksPerLogsRequest: uint64
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
## This value is used to dynamically adjust the number of
## blocks we are trying to download at once during deposit
## syncing. By default, the value is set to the constant
## `targetBlocksPerLogsRequest`, but if the EL is failing
## to serve this number of blocks per single `eth_getLogs`
## request, we temporarily lower the value until the request
## succeeds. The failures are generally expected only in
## periods in the history for very high deposit density.
elConnections: seq[ELConnection]
## All active EL connections
eth1Chain: Eth1Chain
## At larger distances, this chain consists of all blocks
## with deposits. Within the relevant voting period, it
## also includes blocks without deposits because we must
## vote for a block only if it's part of our known history.
syncTargetBlock: Opt[Eth1BlockNumber]
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
chainSyncingLoopFut: Future[void]
exchangeTransitionConfigurationLoopFut: Future[void]
managerState: ELManagerState
2020-10-14 14:04:08 +00:00
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
nextExpectedPayloadParams*: Option[NextExpectedPayloadParams]
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
EtcStatus {.pure.} = enum
notExchangedYet
mismatch
match
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
DepositContractSyncStatus {.pure.} = enum
unknown
notSynced
synced
ELConnectionState {.pure.} = enum
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
NeverTested
Working
Degraded
ELConnection* = ref object
engineUrl: EngineApiUrl
web3: Opt[Web3]
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
## This will be `none` before connecting and while we are
## reconnecting after a lost connetion. You can wait on
## the future below for the moment the connection is active.
connectingFut: Future[Result[Web3, string]].Raising([CancelledError])
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
## This future will be replaced when the connection is lost.
etcStatus: EtcStatus
## The latest status of the `exchangeTransitionConfiguration`
## exchange.
state: ELConnectionState
hysteresisCounter: int
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
depositContractSyncStatus: DepositContractSyncStatus
## Are we sure that this EL has synced the deposit contract?
lastPayloadId: Opt[PayloadID]
FullBlockId* = object
number: Eth1BlockNumber
hash: BlockHash
DataProviderFailure* = object of CatchableError
CorruptDataProvider* = object of DataProviderFailure
DataProviderTimeout* = object of DataProviderFailure
DataProviderConnectionFailure* = object of DataProviderFailure
DisconnectHandler* = proc () {.gcsafe, raises: [].}
DepositEventHandler* = proc (
pubkey: PubKeyBytes,
withdrawalCredentials: WithdrawalCredentialsBytes,
amount: Int64LeBytes,
signature: SignatureBytes,
merkleTreeIndex: Int64LeBytes,
j: JsonNode) {.gcsafe, raises: [].}
2020-12-09 22:44:59 +00:00
declareCounter failed_web3_requests,
"Failed web3 requests"
declareGauge eth1_latest_head,
"The highest Eth1 block number observed on the network"
declareGauge eth1_synced_head,
"Block number of the highest synchronized block according to follow distance"
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
declareCounter engine_api_responses,
"Number of successful requests to the newPayload Engine API end-point",
labels = ["url", "request", "status"]
declareHistogram engine_api_request_duration_seconds,
"Time(s) used to generate signature usign remote signer",
buckets = [0.005, 0.01, 0.025, 0.05, 0.1, 0.25, 0.5, 1.0, 2.5, 5.0],
labels = ["url", "request"]
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
declareCounter engine_api_timeouts,
"Number of timed-out requests to Engine API end-point",
labels = ["url", "request"]
declareCounter engine_api_last_minute_forkchoice_updates_sent,
"Number of last minute requests to the forkchoiceUpdated Engine API end-point just before block proposals",
labels = ["url"]
proc close(connection: ELConnection): Future[void] {.async: (raises: []).} =
if connection.web3.isSome:
try:
let web3 = connection.web3.get
await noCancel web3.close().wait(30.seconds)
except AsyncTimeoutError:
debug "Failed to close execution layer data provider in time",
timeout = 30.seconds
except CatchableError as exc:
# TODO (cheatfate): This handler should be removed when `nim-web3` will
# adopt `asyncraises`.
debug "Failed to close execution layer", error = $exc.name,
reason = $exc.msg
proc increaseCounterTowardsStateChange(connection: ELConnection): bool =
result = connection.hysteresisCounter >= connectionStateChangeHysteresisThreshold
if result:
connection.hysteresisCounter = 0
else:
inc connection.hysteresisCounter
proc decreaseCounterTowardsStateChange(connection: ELConnection) =
if connection.hysteresisCounter > 0:
# While we increase the counter by 1, we decreate it by 20% in order
# to require a steady and affirmative change instead of allowing
# the counter to drift very slowly in one direction when the ratio
# between success and failure is roughly 50:50%
connection.hysteresisCounter = connection.hysteresisCounter div 5
proc setDegradedState(
connection: ELConnection,
requestName: string,
statusCode: int,
errMsg: string
): Future[void] {.async: (raises: []).} =
debug "Failed EL Request", requestName, statusCode, err = errMsg
case connection.state
of ELConnectionState.NeverTested, ELConnectionState.Working:
if connection.increaseCounterTowardsStateChange():
warn "Connection to EL node degraded",
url = url(connection.engineUrl),
failedRequest = requestName,
statusCode, err = errMsg
connection.state = Degraded
await connection.close()
connection.web3 = Opt.none(Web3)
of ELConnectionState.Degraded:
connection.decreaseCounterTowardsStateChange()
proc setWorkingState(connection: ELConnection) =
case connection.state
of ELConnectionState.NeverTested:
connection.hysteresisCounter = 0
connection.state = Working
of ELConnectionState.Degraded:
if connection.increaseCounterTowardsStateChange():
info "Connection to EL node restored",
url = url(connection.engineUrl)
connection.state = Working
of ELConnectionState.Working:
connection.decreaseCounterTowardsStateChange()
proc engineApiRequest[T](
connection: ELConnection,
request: Future[T],
requestName: string,
startTime: Moment,
deadline: Future[void] | Duration | WithoutTimeout,
failureAllowed = false
): Future[T] {.async: (raises: [CatchableError]).} =
## This procedure raises `CancelledError` and `DataProviderTimeout`
## exceptions, and everything which `request` could raise.
try:
let res =
when deadline is WithoutTimeout:
await request
else:
await request.wait(deadline)
engine_api_request_duration_seconds.observe(
float(milliseconds(Moment.now - startTime)) / 1000.0,
[connection.engineUrl.url, requestName])
engine_api_responses.inc(
1, [connection.engineUrl.url, requestName, "200"])
connection.setWorkingState()
res
except AsyncTimeoutError:
engine_api_timeouts.inc(1, [connection.engineUrl.url, requestName])
if not(failureAllowed):
await connection.setDegradedState(requestName, 0, "Request timed out")
raise newException(DataProviderTimeout, "Request timed out")
except CancelledError as exc:
when deadline is WithoutTimeout:
# When `deadline` is set to `noTimeout`, we usually get cancelled on
# timeout which was handled by caller.
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
engine_api_timeouts.inc(1, [connection.engineUrl.url, requestName])
if not(failureAllowed):
await connection.setDegradedState(requestName, 0, "Request timed out")
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
else:
if not(failureAllowed):
await connection.setDegradedState(requestName, 0, "Request interrupted")
raise exc
except CatchableError as exc:
let statusCode =
if request.error of ErrorResponse:
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
((ref ErrorResponse) request.error).status
else:
0
engine_api_responses.inc(
1, [connection.engineUrl.url, requestName, $statusCode])
if not(failureAllowed):
await connection.setDegradedState(
requestName, statusCode, request.error.msg)
raise exc
func raiseIfNil(web3block: BlockObject): BlockObject {.raises: [ValueError].} =
if web3block == nil:
raise newException(ValueError, "EL returned 'null' result for block")
web3block
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
template cfg(m: ELManager): auto =
m.eth1Chain.cfg
func hasJwtSecret*(m: ELManager): bool =
for c in m.elConnections:
if c.engineUrl.jwtSecret.isSome:
return true
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
func isSynced*(m: ELManager): bool =
m.syncTargetBlock.isSome and
m.eth1Chain.blocks.len > 0 and
m.syncTargetBlock.get <= m.eth1Chain.blocks[^1].number
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
template eth1ChainBlocks*(m: ELManager): Deque[Eth1Block] =
m.eth1Chain.blocks
Implement split preset/config support (#2710) * Implement split preset/config support This is the initial bulk refactor to introduce runtime config values in a number of places, somewhat replacing the existing mechanism of loading network metadata. It still needs more work, this is the initial refactor that introduces runtime configuration in some of the places that need it. The PR changes the way presets and constants work, to match the spec. In particular, a "preset" now refers to the compile-time configuration while a "cfg" or "RuntimeConfig" is the dynamic part. A single binary can support either mainnet or minimal, but not both. Support for other presets has been removed completely (can be readded, in case there's need). There's a number of outstanding tasks: * `SECONDS_PER_SLOT` still needs fixing * loading custom runtime configs needs redoing * checking constants against YAML file * yeerongpilly support `build/nimbus_beacon_node --network=yeerongpilly --discv5:no --log-level=DEBUG` * load fork epoch from config * fix fork digest sent in status * nicer error string for request failures * fix tools * one more * fixup * fixup * fixup * use "standard" network definition folder in local testnet Files are loaded from their standard locations, including genesis etc, to conform to the format used in the `eth2-networks` repo. * fix launch scripts, allow unknown config values * fix base config of rest test * cleanups * bundle mainnet config using common loader * fix spec links and names * only include supported preset in binary * drop yeerongpilly, add altair-devnet-0, support boot_enr.yaml
2021-07-12 13:01:38 +00:00
# TODO: Add cfg validation
# MIN_GENESIS_ACTIVE_VALIDATOR_COUNT should be larger than SLOTS_PER_EPOCH
Implement split preset/config support (#2710) * Implement split preset/config support This is the initial bulk refactor to introduce runtime config values in a number of places, somewhat replacing the existing mechanism of loading network metadata. It still needs more work, this is the initial refactor that introduces runtime configuration in some of the places that need it. The PR changes the way presets and constants work, to match the spec. In particular, a "preset" now refers to the compile-time configuration while a "cfg" or "RuntimeConfig" is the dynamic part. A single binary can support either mainnet or minimal, but not both. Support for other presets has been removed completely (can be readded, in case there's need). There's a number of outstanding tasks: * `SECONDS_PER_SLOT` still needs fixing * loading custom runtime configs needs redoing * checking constants against YAML file * yeerongpilly support `build/nimbus_beacon_node --network=yeerongpilly --discv5:no --log-level=DEBUG` * load fork epoch from config * fix fork digest sent in status * nicer error string for request failures * fix tools * one more * fixup * fixup * fixup * use "standard" network definition folder in local testnet Files are loaded from their standard locations, including genesis etc, to conform to the format used in the `eth2-networks` repo. * fix launch scripts, allow unknown config values * fix base config of rest test * cleanups * bundle mainnet config using common loader * fix spec links and names * only include supported preset in binary * drop yeerongpilly, add altair-devnet-0, support boot_enr.yaml
2021-07-12 13:01:38 +00:00
# doAssert SECONDS_PER_ETH1_BLOCK * cfg.ETH1_FOLLOW_DISTANCE < GENESIS_DELAY,
# "Invalid configuration: GENESIS_DELAY is set too low"
func isConnected(connection: ELConnection): bool =
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
connection.web3.isSome
func getJsonRpcRequestHeaders(jwtSecret: Opt[seq[byte]]):
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
auto =
if jwtSecret.isSome:
let secret = jwtSecret.get
(proc(): seq[(string, string)] =
# https://www.rfc-editor.org/rfc/rfc6750#section-6.1.1
@[("Authorization", "Bearer " & getSignedIatToken(
secret, (getTime() - initTime(0, 0)).inSeconds))])
else:
(proc(): seq[(string, string)] = @[])
proc newWeb3*(engineUrl: EngineApiUrl): Future[Web3] =
newWeb3(engineUrl.url,
getJsonRpcRequestHeaders(engineUrl.jwtSecret), httpFlags = {})
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
proc establishEngineApiConnection(url: EngineApiUrl):
Future[Result[Web3, string]] {.
async: (raises: [CancelledError]).} =
try:
ok(await newWeb3(url).wait(engineApiConnectionTimeout))
except AsyncTimeoutError:
err "Engine API connection timed out"
except CancelledError as exc:
raise exc
except CatchableError as exc:
err exc.msg
proc tryConnecting(connection: ELConnection): Future[bool] {.
async: (raises: [CancelledError]).} =
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
if connection.isConnected:
return true
if connection.connectingFut == nil or
connection.connectingFut.finished: # The previous attempt was not successful
connection.connectingFut =
establishEngineApiConnection(connection.engineUrl)
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
let web3Res = await connection.connectingFut
if web3Res.isErr:
warn "Engine API connection failed", err = web3Res.error
false
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
else:
connection.web3 = Opt.some(web3Res.get)
true
proc connectedRpcClient(connection: ELConnection): Future[RpcClient] {.
async: (raises: [CancelledError]).} =
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
while not connection.isConnected:
if not(await connection.tryConnecting()):
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
await sleepAsync(chronos.seconds(10))
connection.web3.get.provider
proc getBlockByHash(
rpcClient: RpcClient,
hash: BlockHash
): Future[BlockObject] {.async: (raises: [CatchableError]).} =
await rpcClient.eth_getBlockByHash(hash, false)
proc getBlockByNumber*(
rpcClient: RpcClient,
number: Eth1BlockNumber
): Future[BlockObject] {.async: (raises: [CatchableError]).} =
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
let hexNumber = try:
let num = distinctBase(number)
&"0x{num:X}" # No leading 0's!
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
except ValueError as exc:
# Since the format above is valid, failing here should not be possible
raiseAssert exc.msg
await rpcClient.eth_getBlockByNumber(hexNumber, false)
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
func areSameAs(expectedParams: Option[NextExpectedPayloadParams],
latestHead, latestSafe, latestFinalized: Eth2Digest,
timestamp: uint64,
randomData: Eth2Digest,
feeRecipient: Eth1Address,
withdrawals: seq[WithdrawalV1]): bool =
expectedParams.isSome and
expectedParams.get.headBlockHash == latestHead and
expectedParams.get.safeBlockHash == latestSafe and
expectedParams.get.finalizedBlockHash == latestFinalized and
expectedParams.get.payloadAttributes.timestamp.uint64 == timestamp and
expectedParams.get.payloadAttributes.prevRandao.bytes == randomData.data and
expectedParams.get.payloadAttributes.suggestedFeeRecipient == feeRecipient and
expectedParams.get.payloadAttributes.withdrawals == withdrawals
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
proc forkchoiceUpdated(rpcClient: RpcClient,
state: ForkchoiceStateV1,
payloadAttributes: Opt[PayloadAttributesV1] |
Opt[PayloadAttributesV2] |
Opt[PayloadAttributesV3]):
Future[ForkchoiceUpdatedResponse] =
when payloadAttributes is Opt[PayloadAttributesV1]:
rpcClient.engine_forkchoiceUpdatedV1(state, payloadAttributes)
elif payloadAttributes is Opt[PayloadAttributesV2]:
rpcClient.engine_forkchoiceUpdatedV2(state, payloadAttributes)
elif payloadAttributes is Opt[PayloadAttributesV3]:
2023-08-15 23:00:35 +00:00
rpcClient.engine_forkchoiceUpdatedV3(state, payloadAttributes)
else:
static: doAssert false
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
proc getPayloadFromSingleEL(
connection: ELConnection,
GetPayloadResponseType: type,
isForkChoiceUpToDate: bool,
2023-08-15 23:00:35 +00:00
consensusHead: Eth2Digest,
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
headBlock, safeBlock, finalizedBlock: Eth2Digest,
timestamp: uint64,
randomData: Eth2Digest,
suggestedFeeRecipient: Eth1Address,
withdrawals: seq[WithdrawalV1]
): Future[GetPayloadResponseType] {.async: (raises: [CatchableError]).} =
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
let
rpcClient = await connection.connectedRpcClient()
payloadId = if isForkChoiceUpToDate and connection.lastPayloadId.isSome:
connection.lastPayloadId.get
elif not headBlock.isZero:
engine_api_last_minute_forkchoice_updates_sent.inc(1, [connection.engineUrl.url])
when GetPayloadResponseType is BellatrixExecutionPayloadWithValue:
let response = await rpcClient.forkchoiceUpdated(
ForkchoiceStateV1(
headBlockHash: headBlock.asBlockHash,
safeBlockHash: safeBlock.asBlockHash,
finalizedBlockHash: finalizedBlock.asBlockHash),
Opt.some PayloadAttributesV1(
timestamp: Quantity timestamp,
prevRandao: FixedBytes[32] randomData.data,
suggestedFeeRecipient: suggestedFeeRecipient))
2023-08-15 23:00:35 +00:00
elif GetPayloadResponseType is engine_api.GetPayloadV2Response:
let response = await rpcClient.forkchoiceUpdated(
ForkchoiceStateV1(
headBlockHash: headBlock.asBlockHash,
safeBlockHash: safeBlock.asBlockHash,
finalizedBlockHash: finalizedBlock.asBlockHash),
Opt.some PayloadAttributesV2(
timestamp: Quantity timestamp,
prevRandao: FixedBytes[32] randomData.data,
suggestedFeeRecipient: suggestedFeeRecipient,
withdrawals: withdrawals))
elif GetPayloadResponseType is engine_api.GetPayloadV3Response or
GetPayloadResponseType is engine_api.GetPayloadV4Response:
# https://github.com/ethereum/execution-apis/blob/90a46e9137c89d58e818e62fa33a0347bba50085/src/engine/prague.md
# does not define any new forkchoiceUpdated, so reuse V3 from Dencun
2023-08-15 23:00:35 +00:00
let response = await rpcClient.forkchoiceUpdated(
ForkchoiceStateV1(
headBlockHash: headBlock.asBlockHash,
safeBlockHash: safeBlock.asBlockHash,
finalizedBlockHash: finalizedBlock.asBlockHash),
Opt.some PayloadAttributesV3(
2023-08-15 23:00:35 +00:00
timestamp: Quantity timestamp,
prevRandao: FixedBytes[32] randomData.data,
suggestedFeeRecipient: suggestedFeeRecipient,
withdrawals: withdrawals,
2024-10-02 13:26:11 +00:00
parentBeaconBlockRoot: consensusHead.to(Hash32)))
else:
static: doAssert false
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
if response.payloadStatus.status != PayloadExecutionStatus.valid or
response.payloadId.isNone:
raise newException(CatchableError, "Head block is not a valid payload")
# Give the EL some time to assemble the block
await sleepAsync(chronos.milliseconds 500)
response.payloadId.get
else:
raise newException(CatchableError, "No confirmed execution head yet")
when GetPayloadResponseType is BellatrixExecutionPayloadWithValue:
2023-08-15 23:00:35 +00:00
let payload =
await engine_api.getPayload(rpcClient, ExecutionPayloadV1, payloadId)
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
return BellatrixExecutionPayloadWithValue(
executionPayload: payload, blockValue: Wei.zero)
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
else:
return await engine_api.getPayload(
rpcClient, GetPayloadResponseType, payloadId)
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
func cmpGetPayloadResponses(lhs, rhs: SomeEnginePayloadWithValue): int =
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
cmp(distinctBase lhs.blockValue, distinctBase rhs.blockValue)
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
template EngineApiResponseType*(T: type bellatrix.ExecutionPayloadForSigning): type =
BellatrixExecutionPayloadWithValue
template EngineApiResponseType*(T: type capella.ExecutionPayloadForSigning): type =
engine_api.GetPayloadV2Response
template EngineApiResponseType*(T: type deneb.ExecutionPayloadForSigning): type =
engine_api.GetPayloadV3Response
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
template EngineApiResponseType*(T: type electra.ExecutionPayloadForSigning): type =
engine_api.GetPayloadV4Response
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
template toEngineWithdrawals*(withdrawals: seq[capella.Withdrawal]): seq[WithdrawalV1] =
mapIt(withdrawals, toEngineWithdrawal(it))
template kind(T: type ExecutionPayloadV1): ConsensusFork =
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
ConsensusFork.Bellatrix
template kind(T: typedesc[ExecutionPayloadV1OrV2|ExecutionPayloadV2]): ConsensusFork =
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
ConsensusFork.Capella
template kind(T: type ExecutionPayloadV3): ConsensusFork =
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
ConsensusFork.Deneb
proc getPayload*(
m: ELManager,
PayloadType: type ForkyExecutionPayloadForSigning,
consensusHead: Eth2Digest,
headBlock, safeBlock, finalizedBlock: Eth2Digest,
timestamp: uint64,
randomData: Eth2Digest,
suggestedFeeRecipient: Eth1Address,
withdrawals: seq[capella.Withdrawal]
): Future[Opt[PayloadType]] {.async: (raises: [CancelledError]).} =
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
if m.elConnections.len == 0:
return err()
let
engineApiWithdrawals = toEngineWithdrawals withdrawals
2023-08-15 23:00:35 +00:00
isFcUpToDate = m.nextExpectedPayloadParams.areSameAs(
headBlock, safeBlock, finalizedBlock, timestamp,
randomData, suggestedFeeRecipient, engineApiWithdrawals)
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
# `getPayloadFromSingleEL` may introduce additional latency
const extraProcessingOverhead = 500.milliseconds
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
let
timeout = GETPAYLOAD_TIMEOUT + extraProcessingOverhead
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
deadline = sleepAsync(timeout)
var bestPayloadIdx = Opt.none(int)
while true:
let requests =
m.elConnections.mapIt(
it.getPayloadFromSingleEL(EngineApiResponseType(PayloadType),
isFcUpToDate, consensusHead, headBlock, safeBlock, finalizedBlock,
timestamp, randomData, suggestedFeeRecipient, engineApiWithdrawals))
let timeoutExceeded =
try:
await allFutures(requests).wait(deadline)
false
except AsyncTimeoutError:
true
except CancelledError as exc:
let pending =
requests.filterIt(not(it.finished())).mapIt(it.cancelAndWait())
await noCancel allFutures(pending)
raise exc
for idx, req in requests:
if not(req.finished()):
warn "Timeout while getting execution payload",
url = m.elConnections[idx].engineUrl.url
elif req.failed():
warn "Failed to get execution payload from EL",
url = m.elConnections[idx].engineUrl.url,
reason = req.error.msg
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
else:
const payloadFork = PayloadType.kind
when payloadFork >= ConsensusFork.Capella:
when payloadFork == ConsensusFork.Capella:
# TODO: The engine_api module may offer an alternative API where
# it is guaranteed to return the correct response type (i.e. the
# rule below will be enforced during deserialization).
if req.value().executionPayload.withdrawals.isNone:
warn "Execution client returned a block without a " &
"'withdrawals' field for a post-Shanghai block",
url = m.elConnections[idx].engineUrl.url
continue
if engineApiWithdrawals !=
req.value().executionPayload.withdrawals.maybeDeref:
# otherwise it formats as "@[(index: ..., validatorIndex: ...,
# address: ..., amount: ...), (index: ..., validatorIndex: ...,
# address: ..., amount: ...)]"
# TODO (cheatfate): should we have `continue` statement at the
# end of this branch. If no such payload could be choosen as
# best one.
warn "Execution client did not return correct withdrawals",
withdrawals_from_cl_len = engineApiWithdrawals.len,
withdrawals_from_el_len =
req.value().executionPayload.withdrawals.maybeDeref.len,
withdrawals_from_cl =
mapIt(engineApiWithdrawals, it.asConsensusWithdrawal),
withdrawals_from_el =
mapIt(
req.value().executionPayload.withdrawals.maybeDeref,
it.asConsensusWithdrawal),
url = m.elConnections[idx].engineUrl.url
# If we have more than one EL connection we consider this as
# a failure.
if len(requests) > 1:
continue
if req.value().executionPayload.extraData.len > MAX_EXTRA_DATA_BYTES:
warn "Execution client provided a block with invalid extraData " &
"(size exceeds limit)",
url = m.elConnections[idx].engineUrl.url,
size = req.value().executionPayload.extraData.len,
limit = MAX_EXTRA_DATA_BYTES
continue
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
if bestPayloadIdx.isNone:
bestPayloadIdx = Opt.some(idx)
else:
if cmpGetPayloadResponses(
req.value(), requests[bestPayloadIdx.get].value()) > 0:
bestPayloadIdx = Opt.some(idx)
let pending =
requests.filterIt(not(it.finished())).mapIt(it.cancelAndWait())
await noCancel allFutures(pending)
if bestPayloadIdx.isSome():
return ok(requests[bestPayloadIdx.get()].value().asConsensusType)
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
if timeoutExceeded:
break
err()
proc waitELToSyncDeposits(
connection: ELConnection,
minimalRequiredBlock: BlockHash
) {.async: (raises: [CancelledError]).} =
var rpcClient: RpcClient = nil
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
if connection.depositContractSyncStatus == DepositContractSyncStatus.synced:
return
var attempt = 0
while true:
if isNil(rpcClient):
rpcClient = await connection.connectedRpcClient()
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
try:
discard raiseIfNil await connection.engineApiRequest(
rpcClient.getBlockByHash(minimalRequiredBlock),
"getBlockByHash", Moment.now(),
web3RequestsTimeout, failureAllowed = true)
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
connection.depositContractSyncStatus = DepositContractSyncStatus.synced
return
except CancelledError as exc:
trace "waitELToSyncDepositContract interrupted",
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
url = connection.engineUrl.url
raise exc
except CatchableError as exc:
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
connection.depositContractSyncStatus = DepositContractSyncStatus.notSynced
if attempt == 0:
warn "Failed to obtain the most recent known block from the " &
"execution layer node (the node is probably not synced)",
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
url = connection.engineUrl.url,
blk = minimalRequiredBlock,
reason = exc.msg
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
elif attempt mod 60 == 0:
# This warning will be produced every 30 minutes
warn "Still failing to obtain the most recent known block from the " &
"execution layer node (the node is probably still not synced)",
url = connection.engineUrl.url,
blk = minimalRequiredBlock,
reason = exc.msg
inc(attempt)
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
await sleepAsync(seconds(30))
rpcClient = nil
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
func networkHasDepositContract(m: ELManager): bool =
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
not m.cfg.DEPOSIT_CONTRACT_ADDRESS.isDefaultValue
func mostRecentKnownBlock(m: ELManager): BlockHash =
if m.eth1Chain.finalizedDepositsMerkleizer.getChunkCount() > 0:
m.eth1Chain.finalizedBlockHash.asBlockHash
else:
m.depositContractBlockHash
proc selectConnectionForChainSyncing(
m: ELManager
): Future[ELConnection] {.async: (raises: [CancelledError,
DataProviderConnectionFailure]).} =
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
doAssert m.elConnections.len > 0
let pendingConnections = m.elConnections.mapIt(
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
if m.networkHasDepositContract:
FutureBase waitELToSyncDeposits(it, m.mostRecentKnownBlock)
else:
FutureBase connectedRpcClient(it))
while true:
var pendingFutures = pendingConnections
try:
discard await race(pendingFutures)
except ValueError:
raiseAssert "pendingFutures should not be empty at this moment"
except CancelledError as exc:
let pending = pendingConnections.filterIt(not(it.finished())).
mapIt(it.cancelAndWait())
await noCancel allFutures(pending)
raise exc
pendingFutures.reset()
for index, future in pendingConnections.pairs():
if future.completed():
let pending = pendingConnections.filterIt(not(it.finished())).
mapIt(it.cancelAndWait())
await noCancel allFutures(pending)
return m.elConnections[index]
elif not(future.finished()):
pendingFutures.add(future)
if len(pendingFutures) == 0:
raise newException(DataProviderConnectionFailure,
"Unable to establish connection for chain syncing")
proc sendNewPayloadToSingleEL(
connection: ELConnection,
payload: engine_api.ExecutionPayloadV1
): Future[PayloadStatusV1] {.async: (raises: [CatchableError]).} =
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
let rpcClient = await connection.connectedRpcClient()
await rpcClient.engine_newPayloadV1(payload)
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
proc sendNewPayloadToSingleEL(
connection: ELConnection,
payload: engine_api.ExecutionPayloadV2
): Future[PayloadStatusV1] {.async: (raises: [CatchableError]).} =
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
let rpcClient = await connection.connectedRpcClient()
await rpcClient.engine_newPayloadV2(payload)
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
proc sendNewPayloadToSingleEL(
connection: ELConnection,
payload: engine_api.ExecutionPayloadV3,
versioned_hashes: seq[engine_api.VersionedHash],
parent_beacon_block_root: FixedBytes[32]
): Future[PayloadStatusV1] {.async: (raises: [CatchableError]).} =
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
let rpcClient = await connection.connectedRpcClient()
await rpcClient.engine_newPayloadV3(
2024-10-02 13:26:11 +00:00
payload, versioned_hashes, Hash32 parent_beacon_block_root)
proc sendNewPayloadToSingleEL(
connection: ELConnection,
payload: engine_api.ExecutionPayloadV4,
versioned_hashes: seq[engine_api.VersionedHash],
parent_beacon_block_root: FixedBytes[32]
): Future[PayloadStatusV1] {.async: (raises: [CatchableError]).} =
2024-04-09 10:44:03 +00:00
let rpcClient = await connection.connectedRpcClient()
await rpcClient.engine_newPayloadV4(
2024-10-02 13:26:11 +00:00
payload, versioned_hashes, Hash32 parent_beacon_block_root)
2024-04-09 10:44:03 +00:00
type
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
StatusRelation = enum
newStatusIsPreferable
oldStatusIsOk
disagreement
func compareStatuses(
newStatus, prevStatus: PayloadExecutionStatus
): StatusRelation =
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
case prevStatus
of PayloadExecutionStatus.syncing:
if newStatus == PayloadExecutionStatus.syncing:
oldStatusIsOk
else:
newStatusIsPreferable
of PayloadExecutionStatus.valid:
case newStatus
of PayloadExecutionStatus.syncing,
PayloadExecutionStatus.accepted,
PayloadExecutionStatus.valid:
oldStatusIsOk
of PayloadExecutionStatus.invalid_block_hash,
PayloadExecutionStatus.invalid:
disagreement
of PayloadExecutionStatus.invalid:
case newStatus
of PayloadExecutionStatus.syncing,
PayloadExecutionStatus.invalid:
oldStatusIsOk
of PayloadExecutionStatus.valid,
PayloadExecutionStatus.accepted,
PayloadExecutionStatus.invalid_block_hash:
disagreement
of PayloadExecutionStatus.accepted:
case newStatus
of PayloadExecutionStatus.accepted,
PayloadExecutionStatus.syncing:
oldStatusIsOk
of PayloadExecutionStatus.valid:
newStatusIsPreferable
of PayloadExecutionStatus.invalid_block_hash,
PayloadExecutionStatus.invalid:
disagreement
of PayloadExecutionStatus.invalid_block_hash:
if newStatus == PayloadExecutionStatus.invalid_block_hash:
oldStatusIsOk
else:
disagreement
type
ELConsensusViolationDetector = object
selectedResponse: Opt[int]
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
disagreementAlreadyDetected: bool
func init(T: type ELConsensusViolationDetector): T =
ELConsensusViolationDetector(
selectedResponse: Opt.none(int),
disagreementAlreadyDetected: false
)
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
proc processResponse(
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
d: var ELConsensusViolationDetector,
elResponseType: typedesc,
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
connections: openArray[ELConnection],
requests: auto,
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
idx: int) =
if not requests[idx].completed:
return
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
let status = requests[idx].value().status
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
if d.selectedResponse.isNone:
d.selectedResponse = Opt.some(idx)
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
elif not d.disagreementAlreadyDetected:
let prevStatus = requests[d.selectedResponse.get].value().status
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
case compareStatuses(status, prevStatus)
of newStatusIsPreferable:
d.selectedResponse = Opt.some(idx)
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
of oldStatusIsOk:
discard
of disagreement:
d.disagreementAlreadyDetected = true
error "Execution layer consensus violation detected",
responseType = name(elResponseType),
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
url1 = connections[d.selectedResponse.get].engineUrl.url,
status1 = prevStatus,
url2 = connections[idx].engineUrl.url,
status2 = status
proc lazyWait(futures: seq[FutureBase]) {.async: (raises: []).} =
block:
let pending = futures.filterIt(not(it.finished()))
if len(pending) > 0:
try:
await allFutures(pending).wait(30.seconds)
except CancelledError:
discard
except AsyncTimeoutError:
discard
block:
let pending = futures.filterIt(not(it.finished())).mapIt(it.cancelAndWait())
if len(pending) > 0:
await noCancel allFutures(pending)
proc sendNewPayload*(
m: ELManager,
blck: SomeForkyBeaconBlock
): Future[PayloadExecutionStatus] {.async: (raises: [CancelledError]).} =
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
let
startTime = Moment.now()
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
deadline = sleepAsync(NEWPAYLOAD_TIMEOUT)
payload = blck.body.asEngineExecutionPayload
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
var
responseProcessor = ELConsensusViolationDetector.init()
while true:
block mainLoop:
let
requests = m.elConnections.mapIt:
let req =
when payload is engine_api.ExecutionPayloadV3 or
payload is engine_api.ExecutionPayloadV4:
# https://github.com/ethereum/consensus-specs/blob/v1.4.0-alpha.1/specs/deneb/beacon-chain.md#process_execution_payload
# Verify the execution payload is valid
# [Modified in Deneb] Pass `versioned_hashes` to Execution Engine
let versioned_hashes = mapIt(
blck.body.blob_kzg_commitments,
engine_api.VersionedHash(kzg_commitment_to_versioned_hash(it)))
sendNewPayloadToSingleEL(
it, payload, versioned_hashes,
FixedBytes[32] blck.parent_root.data)
elif payload is engine_api.ExecutionPayloadV1 or
payload is engine_api.ExecutionPayloadV2:
sendNewPayloadToSingleEL(it, payload)
else:
static: doAssert false
engineApiRequest(it, req, "newPayload", startTime, noTimeout)
var pendingRequests = requests
while true:
let timeoutExceeded =
try:
discard await race(pendingRequests).wait(deadline)
false
except AsyncTimeoutError:
true
except ValueError:
raiseAssert "pendingRequests should not be empty!"
except CancelledError as exc:
let pending =
requests.filterIt(not(it.finished())).mapIt(it.cancelAndWait())
await noCancel allFutures(pending)
raise exc
var stillPending: type(pendingRequests)
for request in pendingRequests:
if not(request.finished()):
stillPending.add(request)
elif request.completed():
let index = requests.find(request)
doAssert(index >= 0)
responseProcessor.processResponse(type(payload),
m.elConnections, requests, index)
pendingRequests = stillPending
if responseProcessor.disagreementAlreadyDetected:
let pending =
pendingRequests.filterIt(not(it.finished())).
mapIt(it.cancelAndWait())
await noCancel allFutures(pending)
return PayloadExecutionStatus.invalid
elif responseProcessor.selectedResponse.isSome():
# We spawn task which will wait for all other responses which are
# still pending, after 30.seconds all pending requests will be
# cancelled.
asyncSpawn lazyWait(pendingRequests.mapIt(FutureBase(it)))
return requests[responseProcessor.selectedResponse.get].value().status
if timeoutExceeded:
# Timeout exceeded, cancelling all pending requests.
let pending =
pendingRequests.filterIt(not(it.finished())).
mapIt(it.cancelAndWait())
await noCancel allFutures(pending)
return PayloadExecutionStatus.syncing
if len(pendingRequests) == 0:
# All requests failed, we will continue our attempts until deadline
# is not finished.
# To avoid continous spam of requests when EL node is offline we
# going to sleep until next attempt for
# (NEWPAYLOAD_TIMEOUT / 4) time (2.seconds).
let timeout =
chronos.nanoseconds(NEWPAYLOAD_TIMEOUT.nanoseconds div 4)
await sleepAsync(timeout)
break mainLoop
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
proc forkchoiceUpdatedForSingleEL(
connection: ELConnection,
state: ref ForkchoiceStateV1,
payloadAttributes: Opt[PayloadAttributesV1] |
Opt[PayloadAttributesV2] |
Opt[PayloadAttributesV3]
): Future[PayloadStatusV1] {.async: (raises: [CatchableError]).} =
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
let
rpcClient = await connection.connectedRpcClient()
response = await rpcClient.forkchoiceUpdated(state[], payloadAttributes)
if response.payloadStatus.status notin {syncing, valid, invalid}:
debug "Invalid fork-choice updated response from the EL",
payloadStatus = response.payloadStatus
return
if response.payloadStatus.status == PayloadExecutionStatus.valid and
response.payloadId.isSome:
connection.lastPayloadId = response.payloadId
return response.payloadStatus
proc forkchoiceUpdated*(
m: ELManager,
headBlockHash, safeBlockHash, finalizedBlockHash: Eth2Digest,
payloadAttributes: Opt[PayloadAttributesV1] |
Opt[PayloadAttributesV2] |
Opt[PayloadAttributesV3]
): Future[(PayloadExecutionStatus, Opt[BlockHash])] {.
async: (raises: [CancelledError]).} =
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
doAssert not headBlockHash.isZero
# Allow finalizedBlockHash to be 0 to avoid sync deadlocks.
#
# https://github.com/ethereum/EIPs/blob/master/EIPS/eip-3675.md#pos-events
# has "Before the first finalized block occurs in the system the finalized
# block hash provided by this event is stubbed with
# `0x0000000000000000000000000000000000000000000000000000000000000000`."
# and
# https://github.com/ethereum/consensus-specs/blob/v1.5.0-alpha.8/specs/bellatrix/validator.md#executionpayload
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
# notes "`finalized_block_hash` is the hash of the latest finalized execution
# payload (`Hash32()` if none yet finalized)"
if m.elConnections.len == 0:
return (PayloadExecutionStatus.syncing, Opt.none BlockHash)
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
when payloadAttributes is Opt[PayloadAttributesV3]:
2023-08-15 23:00:35 +00:00
template payloadAttributesV3(): auto =
if payloadAttributes.isSome:
payloadAttributes.get
else:
# As timestamp and prevRandao are both 0, won't false-positive match
2023-08-15 23:00:35 +00:00
(static(default(PayloadAttributesV3)))
elif payloadAttributes is Opt[PayloadAttributesV2]:
2023-08-15 23:00:35 +00:00
template payloadAttributesV3(): auto =
if payloadAttributes.isSome:
PayloadAttributesV3(
timestamp: payloadAttributes.get.timestamp,
prevRandao: payloadAttributes.get.prevRandao,
suggestedFeeRecipient: payloadAttributes.get.suggestedFeeRecipient,
withdrawals: payloadAttributes.get.withdrawals,
2024-10-02 13:26:11 +00:00
parentBeaconBlockRoot: default(Hash32))
2023-08-15 23:00:35 +00:00
else:
# As timestamp and prevRandao are both 0, won't false-positive match
(static(default(PayloadAttributesV3)))
elif payloadAttributes is Opt[PayloadAttributesV1]:
2023-08-15 23:00:35 +00:00
template payloadAttributesV3(): auto =
if payloadAttributes.isSome:
2023-08-15 23:00:35 +00:00
PayloadAttributesV3(
timestamp: payloadAttributes.get.timestamp,
prevRandao: payloadAttributes.get.prevRandao,
suggestedFeeRecipient: payloadAttributes.get.suggestedFeeRecipient,
2023-08-15 23:00:35 +00:00
withdrawals: @[],
2024-10-02 13:26:11 +00:00
parentBeaconBlockRoot: default(Hash32))
else:
# As timestamp and prevRandao are both 0, won't false-positive match
2023-08-15 23:00:35 +00:00
(static(default(PayloadAttributesV3)))
else:
static: doAssert false
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
let
state = newClone ForkchoiceStateV1(
headBlockHash: headBlockHash.asBlockHash,
safeBlockHash: safeBlockHash.asBlockHash,
finalizedBlockHash: finalizedBlockHash.asBlockHash)
startTime = Moment.now
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
deadline = sleepAsync(FORKCHOICEUPDATED_TIMEOUT)
var
responseProcessor = ELConsensusViolationDetector.init()
while true:
block mainLoop:
let requests =
m.elConnections.mapIt:
let req = it.forkchoiceUpdatedForSingleEL(state, payloadAttributes)
engineApiRequest(it, req, "forkchoiceUpdated", startTime, noTimeout)
var pendingRequests = requests
while true:
let timeoutExceeded =
try:
discard await race(pendingRequests).wait(deadline)
false
except ValueError:
raiseAssert "pendingRequests should not be empty!"
except AsyncTimeoutError:
true
except CancelledError as exc:
let pending =
pendingRequests.filterIt(not(it.finished())).
mapIt(it.cancelAndWait())
await noCancel allFutures(pending)
raise exc
var stillPending: type(pendingRequests)
for request in pendingRequests:
if not(request.finished()):
stillPending.add(request)
elif request.completed():
let index = requests.find(request)
doAssert(index >= 0)
responseProcessor.processResponse(
PayloadStatusV1, m.elConnections, requests, index)
pendingRequests = stillPending
template assignNextExpectedPayloadParams() =
# Ensure that there's no race condition window where getPayload's
# check for whether it needs to trigger a new fcU payload, due to
# cache invalidation, falsely suggests that the expected payload
# matches, and similarly that if the fcU fails or times out for other
# reasons, the expected payload params remain synchronized with
# EL state.
assign(
m.nextExpectedPayloadParams,
some NextExpectedPayloadParams(
headBlockHash: headBlockHash,
safeBlockHash: safeBlockHash,
finalizedBlockHash: finalizedBlockHash,
payloadAttributes: payloadAttributesV3))
template getSelected: untyped =
let data = requests[responseProcessor.selectedResponse.get].value()
(data.status, data.latestValidHash)
if responseProcessor.disagreementAlreadyDetected:
let pending =
pendingRequests.filterIt(not(it.finished())).
mapIt(it.cancelAndWait())
await noCancel allFutures(pending)
return (PayloadExecutionStatus.invalid, Opt.none BlockHash)
elif responseProcessor.selectedResponse.isSome:
# We spawn task which will wait for all other responses which are
# still pending, after 30.seconds all pending requests will be
# cancelled.
asyncSpawn lazyWait(pendingRequests.mapIt(FutureBase(it)))
assignNextExpectedPayloadParams()
return getSelected()
if timeoutExceeded:
# Timeout exceeded, cancelling all pending requests.
let pending =
pendingRequests.filterIt(not(it.finished())).
mapIt(it.cancelAndWait())
await noCancel allFutures(pending)
return (PayloadExecutionStatus.syncing, Opt.none BlockHash)
if len(pendingRequests) == 0:
# All requests failed, we will continue our attempts until deadline
# is not finished.
# To avoid continous spam of requests when EL node is offline we
# going to sleep until next attempt for
# (FORKCHOICEUPDATED_TIMEOUT / 4) time (2.seconds).
let timeout =
chronos.nanoseconds(FORKCHOICEUPDATED_TIMEOUT.nanoseconds div 4)
await sleepAsync(timeout)
break mainLoop
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
# TODO can't be defined within exchangeConfigWithSingleEL
func `==`(x, y: Quantity): bool {.borrow.}
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
proc exchangeConfigWithSingleEL(
m: ELManager,
connection: ELConnection
) {.async: (raises: [CancelledError]).} =
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
let rpcClient = await connection.connectedRpcClient()
if m.eth1Network.isSome and
connection.etcStatus == EtcStatus.notExchangedYet:
try:
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
let
providerChain = await connection.engineApiRequest(
rpcClient.eth_chainId(), "chainId", Moment.now(),
web3RequestsTimeout)
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
# https://chainid.network/
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
expectedChain = case m.eth1Network.get
of mainnet: 1.Quantity
of sepolia: 11155111.Quantity
of holesky: 17000.Quantity
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
if expectedChain != providerChain:
warn "The specified EL client is connected to a different chain",
url = connection.engineUrl,
expectedChain = distinctBase(expectedChain),
actualChain = distinctBase(providerChain)
connection.etcStatus = EtcStatus.mismatch
return
except CancelledError as exc:
debug "Configuration exchange was interrupted"
raise exc
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
except CatchableError as exc:
# Typically because it's not synced through EIP-155, assuming this Web3
# endpoint has been otherwise working.
debug "Failed to obtain eth_chainId", reason = exc.msg
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
connection.etcStatus = EtcStatus.match
proc exchangeTransitionConfiguration*(
m: ELManager
) {.async: (raises: [CancelledError]).} =
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
if m.elConnections.len == 0:
return
let requests = m.elConnections.mapIt(m.exchangeConfigWithSingleEL(it))
try:
await allFutures(requests).wait(3.seconds)
except AsyncTimeoutError:
discard
except CancelledError as exc:
let pending = requests.filterIt(not(it.finished())).
mapIt(it.cancelAndWait())
await noCancel allFutures(pending)
raise exc
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
let (pending, failed, finished) =
block:
var
failed = 0
done = 0
pending: seq[Future[void]]
for req in requests:
if not req.finished():
pending.add(req.cancelAndWait())
else:
if req.completed():
inc(done)
else:
inc(failed)
(pending, failed, done)
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
await noCancel allFutures(pending)
if (len(pending) > 0) or (failed != 0):
warn "Failed to exchange configuration with the configured EL end-points",
completed = finished, failed = failed, timed_out = len(pending)
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
template readJsonField(logEvent, field: untyped, ValueType: type): untyped =
if logEvent.field.isNone:
raise newException(CatchableError,
"Web3 provider didn't return needed logEvent field " & astToStr(field))
logEvent.field.get
template init[N: static int](T: type DynamicBytes[N, N]): T =
T newSeq[byte](N)
proc fetchTimestamp(
connection: ELConnection,
rpcClient: RpcClient,
blk: Eth1Block
) {.async: (raises: [CatchableError]).} =
debug "Fetching block timestamp", blockNum = blk.number
let web3block = raiseIfNil await connection.engineApiRequest(
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
rpcClient.getBlockByHash(blk.hash.asBlockHash),
"getBlockByHash", Moment.now(), web3RequestsTimeout)
blk.timestamp = Eth1BlockTimestamp(web3block.timestamp)
func depositEventsToBlocks(
depositsList: openArray[JsonString]
): seq[Eth1Block] {.raises: [CatchableError].} =
var lastEth1Block: Eth1Block
for logEventData in depositsList:
let
logEvent = JrpcConv.decode(logEventData.string, LogObject)
blockNumber = Eth1BlockNumber readJsonField(logEvent, blockNumber, Quantity)
blockHash = readJsonField(logEvent, blockHash, BlockHash)
if lastEth1Block == nil or lastEth1Block.number != blockNumber:
lastEth1Block = Eth1Block(
hash: blockHash.asEth2Digest,
number: blockNumber
# The `timestamp` is set in `syncBlockRange` immediately
# after calling this function, because we don't want to
# make this function `async`
)
result.add lastEth1Block
var
pubkey = init PubKeyBytes
withdrawalCredentials = init WithdrawalCredentialsBytes
amount = init Int64LeBytes
signature = init SignatureBytes
index = init Int64LeBytes
var offset = 0
offset += decode(logEvent.data, 0, offset, pubkey)
offset += decode(logEvent.data, 0, offset, withdrawalCredentials)
offset += decode(logEvent.data, 0, offset, amount)
offset += decode(logEvent.data, 0, offset, signature)
offset += decode(logEvent.data, 0, offset, index)
if pubkey.len != 48 or
withdrawalCredentials.len != 32 or
amount.len != 8 or
signature.len != 96 or
index.len != 8:
raise newException(CorruptDataProvider,
"Web3 provider supplied invalid deposit logs")
lastEth1Block.deposits.add DepositData(
pubkey: ValidatorPubKey.init(pubkey.toArray),
withdrawal_credentials: Eth2Digest(data: withdrawalCredentials.toArray),
amount: bytes_to_uint64(amount.toArray).Gwei,
signature: ValidatorSig.init(signature.toArray))
type
DepositContractDataStatus = enum
Fetched
VerifiedCorrect
DepositRootIncorrect
DepositRootUnavailable
DepositCountIncorrect
DepositCountUnavailable
when hasDepositRootChecks:
const
contractCallTimeout = 60.seconds
proc fetchDepositContractData(
connection: ELConnection,
rpcClient: RpcClient,
depositContract: Sender[DepositContract],
blk: Eth1Block
): Future[DepositContractDataStatus] {.async: (raises: [CancelledError]).} =
let
startTime = Moment.now()
deadline = sleepAsync(contractCallTimeout)
depositRootFut =
depositContract.get_deposit_root.call(blockNumber = blk.number)
rawCountFut =
depositContract.get_deposit_count.call(blockNumber = blk.number)
engineFut1 = connection.engineApiRequest(
depositRootFut, "get_deposit_root", startTime, deadline,
failureAllowed = true)
engineFut2 = connection.engineApiRequest(
rawCountFut, "get_deposit_count", startTime, deadline,
failureAllowed = true)
try:
await allFutures(engineFut1, engineFut2)
except CancelledError as exc:
var pending: seq[Future[void]]
if not(engineFut1.finished()):
pending.add(engineFut1.cancelAndWait())
if not(engineFut2.finished()):
pending.add(engineFut2.cancelAndWait())
await noCancel allFutures(pending)
raise exc
var res: DepositContractDataStatus
try:
# `engineFut1` could hold timeout exception `DataProviderTimeout`.
discard engineFut1.read()
let fetchedRoot = asEth2Digest(depositRootFut.read())
if blk.depositRoot.isZero:
blk.depositRoot = fetchedRoot
res = Fetched
elif blk.depositRoot == fetchedRoot:
res = VerifiedCorrect
else:
res = DepositRootIncorrect
except CatchableError as exc:
debug "Failed to fetch deposits root", block_number = blk.number,
reason = exc.msg
res = DepositRootUnavailable
2020-10-21 13:25:53 +00:00
try:
# `engineFut2` could hold timeout exception `DataProviderTimeout`.
discard engineFut2.read()
let fetchedCount = bytes_to_uint64(rawCountFut.read().toArray)
if blk.depositCount == 0:
blk.depositCount = fetchedCount
elif blk.depositCount != fetchedCount:
res = DepositCountIncorrect
except CatchableError as exc:
debug "Failed to fetch deposits count", block_number = blk.number,
reason = exc.msg
res = DepositCountUnavailable
res
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
template trackFinalizedState*(m: ELManager,
finalizedEth1Data: Eth1Data,
finalizedStateDepositIndex: uint64): bool =
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
trackFinalizedState(m.eth1Chain, finalizedEth1Data, finalizedStateDepositIndex)
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
template getBlockProposalData*(m: ELManager,
state: ForkedHashedBeaconState,
finalizedEth1Data: Eth1Data,
2022-03-31 14:43:05 +00:00
finalizedStateDepositIndex: uint64):
BlockProposalEth1Data =
getBlockProposalData(
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
m.eth1Chain, state, finalizedEth1Data, finalizedStateDepositIndex)
2022-03-31 14:43:05 +00:00
func new*(T: type ELConnection, engineUrl: EngineApiUrl): T =
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
ELConnection(
engineUrl: engineUrl,
depositContractSyncStatus: DepositContractSyncStatus.unknown)
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
proc new*(T: type ELManager,
cfg: RuntimeConfig,
depositContractBlockNumber: uint64,
depositContractBlockHash: Eth2Digest,
db: BeaconChainDB,
engineApiUrls: seq[EngineApiUrl],
eth1Network: Opt[Eth1Network]): T =
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
let
eth1Chain = Eth1Chain.init(
cfg, db, depositContractBlockNumber, depositContractBlockHash)
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
debug "Initializing ELManager",
depositContractBlockNumber,
depositContractBlockHash
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
T(eth1Chain: eth1Chain,
Implement split preset/config support (#2710) * Implement split preset/config support This is the initial bulk refactor to introduce runtime config values in a number of places, somewhat replacing the existing mechanism of loading network metadata. It still needs more work, this is the initial refactor that introduces runtime configuration in some of the places that need it. The PR changes the way presets and constants work, to match the spec. In particular, a "preset" now refers to the compile-time configuration while a "cfg" or "RuntimeConfig" is the dynamic part. A single binary can support either mainnet or minimal, but not both. Support for other presets has been removed completely (can be readded, in case there's need). There's a number of outstanding tasks: * `SECONDS_PER_SLOT` still needs fixing * loading custom runtime configs needs redoing * checking constants against YAML file * yeerongpilly support `build/nimbus_beacon_node --network=yeerongpilly --discv5:no --log-level=DEBUG` * load fork epoch from config * fix fork digest sent in status * nicer error string for request failures * fix tools * one more * fixup * fixup * fixup * use "standard" network definition folder in local testnet Files are loaded from their standard locations, including genesis etc, to conform to the format used in the `eth2-networks` repo. * fix launch scripts, allow unknown config values * fix base config of rest test * cleanups * bundle mainnet config using common loader * fix spec links and names * only include supported preset in binary * drop yeerongpilly, add altair-devnet-0, support boot_enr.yaml
2021-07-12 13:01:38 +00:00
depositContractAddress: cfg.DEPOSIT_CONTRACT_ADDRESS,
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
depositContractBlockNumber: depositContractBlockNumber,
depositContractBlockHash: depositContractBlockHash.asBlockHash,
elConnections: mapIt(engineApiUrls, ELConnection.new(it)),
eth1Network: eth1Network,
blocksPerLogsRequest: targetBlocksPerLogsRequest,
managerState: ELManagerState.Running)
proc stop(m: ELManager) {.async: (raises: []).} =
if m.managerState notin {ELManagerState.Closing, ELManagerState.Closed}:
m.managerState = ELManagerState.Closing
var pending: seq[Future[void].Raising([])]
if not(m.chainSyncingLoopFut.isNil()) and
not(m.chainSyncingLoopFut.finished()):
pending.add(m.chainSyncingLoopFut.cancelAndWait())
if not(m.exchangeTransitionConfigurationLoopFut.isNil()) and
not(m.exchangeTransitionConfigurationLoopFut.finished()):
pending.add(m.exchangeTransitionConfigurationLoopFut.cancelAndWait())
for connection in m.elConnections:
pending.add(connection.close())
await noCancel allFutures(pending)
m.managerState = ELManagerState.Closed
const
votedBlocksSafetyMargin = 50
2023-03-10 17:40:27 +00:00
func earliestBlockOfInterest(
m: ELManager,
latestEth1BlockNumber: Eth1BlockNumber): Eth1BlockNumber =
let blocksOfInterestRange =
SLOTS_PER_ETH1_VOTING_PERIOD +
(2 * m.cfg.ETH1_FOLLOW_DISTANCE) +
votedBlocksSafetyMargin
if latestEth1BlockNumber > blocksOfInterestRange.Eth1BlockNumber:
2023-03-10 17:40:27 +00:00
latestEth1BlockNumber - blocksOfInterestRange
else:
0.Eth1BlockNumber
proc syncBlockRange(
m: ELManager,
connection: ELConnection,
rpcClient: RpcClient,
depositContract: Sender[DepositContract],
fromBlock, toBlock,
fullSyncFromBlock: Eth1BlockNumber
) {.async: (raises: [CatchableError]).} =
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
doAssert m.eth1Chain.blocks.len > 0
var currentBlock = fromBlock
while currentBlock <= toBlock:
var
depositLogs: seq[JsonString]
maxBlockNumberRequested: Eth1BlockNumber
backoff = 100
while true:
maxBlockNumberRequested =
min(toBlock, currentBlock + m.blocksPerLogsRequest - 1)
debug "Obtaining deposit log events",
fromBlock = currentBlock,
toBlock = maxBlockNumberRequested,
backoff
debug.logTime "Deposit logs obtained":
# Reduce all request rate until we have a more general solution
# for dealing with Infura's rate limits
await sleepAsync(milliseconds(backoff))
depositLogs =
try:
await connection.engineApiRequest(
depositContract.getJsonLogs(
DepositEvent,
fromBlock = Opt.some blockId(currentBlock),
toBlock = Opt.some blockId(maxBlockNumberRequested)),
"getLogs", Moment.now(), 30.seconds)
except CancelledError as exc:
debug "Request for deposit logs was interrupted"
raise exc
except CatchableError as exc:
debug "Request for deposit logs failed", reason = exc.msg
inc failed_web3_requests
backoff = (backoff * 3) div 2
m.blocksPerLogsRequest = m.blocksPerLogsRequest div 2
if m.blocksPerLogsRequest == 0:
m.blocksPerLogsRequest = 1
raise exc
continue
m.blocksPerLogsRequest = min(
(m.blocksPerLogsRequest * 3 + 1) div 2,
targetBlocksPerLogsRequest)
currentBlock = maxBlockNumberRequested + 1
break
let blocksWithDeposits = depositEventsToBlocks(depositLogs)
for i in 0 ..< blocksWithDeposits.len:
let blk = blocksWithDeposits[i]
if blk.number > fullSyncFromBlock:
try:
await fetchTimestamp(connection, rpcClient, blk)
except CancelledError as exc:
debug "Request for block timestamp was interrupted",
block_number = blk.number
raise exc
except CatchableError as exc:
debug "Request for block timestamp failed",
block_number = blk.number, reason = exc.msg
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
let lastBlock = m.eth1Chain.blocks.peekLast
for n in max(lastBlock.number + 1, fullSyncFromBlock) ..< blk.number:
debug "Obtaining block without deposits", blockNum = n
let noDepositsBlock =
try:
raiseIfNil await connection.engineApiRequest(
rpcClient.getBlockByNumber(n),
"getBlockByNumber", Moment.now(), web3RequestsTimeout)
except CancelledError as exc:
debug "The process of obtaining the block was interrupted",
block_number = n
raise exc
except CatchableError as exc:
debug "Request for block failed", block_number = n,
reason = exc.msg
raise exc
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
m.eth1Chain.addBlock(
lastBlock.makeSuccessorWithoutDeposits(noDepositsBlock))
eth1_synced_head.set noDepositsBlock.number.toGaugeValue
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
m.eth1Chain.addBlock blk
2020-12-09 22:44:59 +00:00
eth1_synced_head.set blk.number.toGaugeValue
if blocksWithDeposits.len > 0:
let lastIdx = blocksWithDeposits.len - 1
template lastBlock: auto = blocksWithDeposits[lastIdx]
let status =
when hasDepositRootChecks:
await fetchDepositContractData(
connection, rpcClient, depositContract, lastBlock)
else:
DepositRootUnavailable
when hasDepositRootChecks:
debug "Deposit contract state verified",
status = $status,
ourCount = lastBlock.depositCount,
ourRoot = lastBlock.depositRoot
case status
of DepositRootIncorrect, DepositCountIncorrect:
raise newException(CorruptDataProvider,
"The deposit log events disagree with the deposit contract state")
else:
discard
info "Eth1 sync progress",
blockNumber = lastBlock.number,
depositsProcessed = lastBlock.depositCount
func hasConnection*(m: ELManager): bool =
m.elConnections.len > 0
func hasAnyWorkingConnection*(m: ELManager): bool =
m.elConnections.anyIt(it.state == Working or it.state == NeverTested)
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
func hasProperlyConfiguredConnection*(m: ELManager): bool =
for connection in m.elConnections:
if connection.etcStatus == EtcStatus.match:
return true
false
proc startExchangeTransitionConfigurationLoop(
m: ELManager
) {.async: (raises: [CancelledError]).} =
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
debug "Starting exchange transition configuration loop"
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
while true:
# https://github.com/ethereum/execution-apis/blob/v1.0.0-beta.3/src/engine/paris.md#specification-3
await m.exchangeTransitionConfiguration()
await sleepAsync(60.seconds)
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
proc syncEth1Chain(
m: ELManager,
connection: ELConnection
) {.async: (raises: [CatchableError]).} =
let rpcClient =
try:
await connection.connectedRpcClient().wait(1.seconds)
except AsyncTimeoutError:
raise newException(DataProviderTimeout, "Connection timed out")
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
let
# BEWARE
# `connectedRpcClient` guarantees that connection.web3 will not be
# `none` here, but it's not safe to initialize this later (e.g closer
# to where it's used) because `connection.web3` may be set to `none`
# at any time after a failed request. Luckily, the `contractSender`
# object is very cheap to create.
depositContract = connection.web3.get.contractSender(
DepositContract, m.depositContractAddress)
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
shouldProcessDeposits = not (
m.depositContractAddress.isZeroMemory or
m.eth1Chain.finalizedBlockHash.data.isZeroMemory)
trace "Starting syncEth1Chain", shouldProcessDeposits
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
logScope:
url = connection.engineUrl.url
# We might need to reset the chain if the new provider disagrees
# with the previous one regarding the history of the chain or if
# we have detected a conensus violation - our view disagreeing with
# the majority of the validators in the network.
#
# Consensus violations happen in practice because the web3 providers
# sometimes return incomplete or incorrect deposit log events even
# when they don't indicate any errors in the response. When this
# happens, we are usually able to download the data successfully
# on the second attempt.
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
#
# TODO
# Perhaps the above problem was manifesting only with the obsolete
# JSON-RPC data providers, which can no longer be used with Nimbus.
if m.eth1Chain.blocks.len > 0:
let needsReset = m.eth1Chain.hasConsensusViolation or (block:
let
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
lastKnownBlock = m.eth1Chain.blocks.peekLast
matchingBlockAtNewEl =
try:
raiseIfNil await connection.engineApiRequest(
rpcClient.getBlockByNumber(lastKnownBlock.number),
"getBlockByNumber", Moment.now(), web3RequestsTimeout)
except CancelledError as exc:
debug "getBlockByNumber request has been interrupted",
last_known_block_number = lastKnownBlock.number
raise exc
except CatchableError as exc:
debug "getBlockByNumber request failed",
last_known_block_number = lastKnownBlock.number,
reason = exc.msg
raise exc
lastKnownBlock.hash.asBlockHash != matchingBlockAtNewEl.hash)
if needsReset:
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
trace "Resetting the Eth1 chain",
hasConsensusViolation = m.eth1Chain.hasConsensusViolation
m.eth1Chain.clear()
var eth1SyncedTo: Eth1BlockNumber
if shouldProcessDeposits:
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
if m.eth1Chain.blocks.len == 0:
let finalizedBlockHash = m.eth1Chain.finalizedBlockHash.asBlockHash
let startBlock =
try:
raiseIfNil await connection.engineApiRequest(
rpcClient.getBlockByHash(finalizedBlockHash),
"getBlockByHash", Moment.now(), web3RequestsTimeout)
except CancelledError as exc:
debug "getBlockByHash() request has been interrupted",
finalized_block_hash = finalizedBlockHash
raise exc
except CatchableError as exc:
debug "getBlockByHash() request has failed",
finalized_block_hash = finalizedBlockHash,
reason = exc.msg
raise exc
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
m.eth1Chain.addBlock Eth1Block(
hash: m.eth1Chain.finalizedBlockHash,
number: Eth1BlockNumber startBlock.number,
timestamp: Eth1BlockTimestamp startBlock.timestamp)
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
eth1SyncedTo = m.eth1Chain.blocks[^1].number
eth1_synced_head.set eth1SyncedTo.toGaugeValue
eth1_finalized_head.set eth1SyncedTo.toGaugeValue
eth1_finalized_deposits.set(
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
m.eth1Chain.finalizedDepositsMerkleizer.getChunkCount.toGaugeValue)
2020-12-09 22:44:59 +00:00
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
debug "Starting Eth1 syncing", `from` = shortLog(m.eth1Chain.blocks[^1])
var latestBlockNumber: Eth1BlockNumber
while true:
debug "syncEth1Chain tick",
shouldProcessDeposits, latestBlockNumber, eth1SyncedTo
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
# TODO (cheatfate): This should be removed
if bnStatus == BeaconNodeStatus.Stopping:
await noCancel m.stop()
return
2020-10-14 14:04:08 +00:00
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
if m.eth1Chain.hasConsensusViolation:
raise newException(CorruptDataProvider,
"Eth1 chain contradicts Eth2 consensus")
let latestBlock =
try:
raiseIfNil await connection.engineApiRequest(
rpcClient.eth_getBlockByNumber(blockId("latest"), false),
"getBlockByNumber", Moment.now(), web3RequestsTimeout)
except CancelledError as exc:
debug "Latest block request has been interrupted"
raise exc
except CatchableError as exc:
warn "Failed to obtain the latest block from the EL", reason = exc.msg
raise exc
latestBlockNumber = latestBlock.number
m.syncTargetBlock = Opt.some(
if latestBlock.number > m.cfg.ETH1_FOLLOW_DISTANCE.Eth1BlockNumber:
latestBlock.number - m.cfg.ETH1_FOLLOW_DISTANCE
else:
0.Eth1BlockNumber)
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
if m.syncTargetBlock.get <= eth1SyncedTo:
# The chain reorged to a lower height.
# It's relatively safe to ignore that.
await sleepAsync(m.cfg.SECONDS_PER_ETH1_BLOCK.int.seconds)
continue
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
eth1_latest_head.set latestBlock.number.toGaugeValue
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
if shouldProcessDeposits and
latestBlock.number.uint64 > m.cfg.ETH1_FOLLOW_DISTANCE:
try:
await m.syncBlockRange(connection,
rpcClient,
depositContract,
eth1SyncedTo + 1,
m.syncTargetBlock.get,
m.earliestBlockOfInterest(latestBlock.number))
except CancelledError as exc:
debug "Syncing block range process has been interrupted"
raise exc
except CatchableError as exc:
debug "Syncing block range process has been failed", reason = exc.msg
raise exc
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
eth1SyncedTo = m.syncTargetBlock.get
eth1_synced_head.set eth1SyncedTo.toGaugeValue
proc startChainSyncingLoop(
m: ELManager
) {.async: (raises: []).} =
info "Starting execution layer deposit syncing",
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
contract = $m.depositContractAddress
var syncedConnectionFut = m.selectConnectionForChainSyncing()
info "Connection attempt started"
var runLoop = true
while runLoop:
try:
let connection = await syncedConnectionFut.wait(60.seconds)
await syncEth1Chain(m, connection)
except AsyncTimeoutError:
notice "No synced EL nodes available for deposit syncing"
try:
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
await sleepAsync(chronos.seconds(30))
except CancelledError:
runLoop = false
except CancelledError:
runLoop = false
except CatchableError:
try:
await sleepAsync(10.seconds)
except CancelledError:
runLoop = false
break
debug "Restarting the deposit syncing loop"
# A more detailed error is already logged by trackEngineApiRequest
# To be extra safe, we will make a fresh connection attempt
await syncedConnectionFut.cancelAndWait()
syncedConnectionFut = m.selectConnectionForChainSyncing()
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
debug "EL chain syncing process has been stopped"
proc start*(m: ELManager, syncChain = true) {.gcsafe.} =
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
if m.elConnections.len == 0:
return
## Calling `ELManager.start()` on an already started ELManager is a noop
if syncChain and m.chainSyncingLoopFut.isNil:
Support for driving multiple EL nodes from a single Nimbus BN (#4465) * Support for driving multiple EL nodes from a single Nimbus BN Full list of changes: * Eth1Monitor has been renamed to ELManager to match its current responsibilities better. * The ELManager is no longer optional in the code (it won't have a nil value under any circumstances). * The support for subscribing for headers was removed as it only worked with WebSockets and contributed significant complexity while bringing only a very minor advantage. * The `--web3-url` parameter has been deprecated in favor of a new `--el` parameter. The new parameter has a reasonable default value and supports specifying a different JWT for each connection. Each connection can also be configured with a different set of responsibilities (e.g. download deposits, validate blocks and/or produce blocks). On the command-line, these properties can be configured through URL properties stored in the #anchor part of the URL. In TOML files, they come with a very natural syntax (althrough the URL scheme is also supported). * The previously scattered EL-related state and logic is now moved to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim` in a follow-up commit). State is assigned properly either to the `ELManager` or the to individual `ELConnection` objects where appropriate. The ELManager executes all Engine API requests against all attached EL nodes, in parallel. It compares their results and if there is a disagreement regarding the validity of a certain payload, this is detected and the beacon node is protected from publishing a block with a potential execution layer consensus bug in it. The BN provides metrics per EL node for the number of successful or failed requests for each type Engine API requests. If an EL node goes offline and connectivity is resoted later, we report the problem and the remedy in edge-triggered fashion. * More progress towards implementing Deneb block production in the VC and comparing the value of blocks produced by the EL and the builder API. * Adds a Makefile target for the zhejiang testnet
2023-03-05 01:40:21 +00:00
m.chainSyncingLoopFut =
m.startChainSyncingLoop()
if m.hasJwtSecret and m.exchangeTransitionConfigurationLoopFut.isNil:
m.exchangeTransitionConfigurationLoopFut =
m.startExchangeTransitionConfigurationLoop()
func `$`(x: Quantity): string =
$(x.uint64)
func `$`(x: BlockObject): string =
$(x.number) & " [" & $(x.hash) & "]"
proc testWeb3Provider*(
web3Url: Uri,
depositContractAddress: Eth1Address,
jwtSecret: Opt[seq[byte]]
) {.async: (raises: [CatchableError]).} =
stdout.write "Establishing web3 connection..."
let web3 =
try:
await newWeb3($web3Url,
getJsonRpcRequestHeaders(jwtSecret)).wait(5.seconds)
except CatchableError as exc:
stdout.write "\rEstablishing web3 connection: Failure(" & exc.msg & ")\n"
quit 1
stdout.write "\rEstablishing web3 connection: Connected\n"
template request(actionDesc: static string,
action: untyped): untyped =
stdout.write actionDesc & "..."
stdout.flushFile()
var res: typeof(read action)
try:
let fut = action
res = await fut.wait(web3RequestsTimeout)
when res is BlockObject:
res = raiseIfNil res
stdout.write "\r" & actionDesc & ": " & $res
except CatchableError as err:
stdout.write "\r" & actionDesc & ": Error(" & err.msg & ")"
stdout.write "\n"
res
2023-11-01 04:53:09 +00:00
discard request "Chain ID":
web3.provider.eth_chainId()
2023-11-01 04:53:09 +00:00
discard request "Sync status":
web3.provider.eth_syncing()
let
latestBlock = request "Latest block":
web3.provider.eth_getBlockByNumber(blockId("latest"), false)
ns = web3.contractSender(DepositContract, depositContractAddress)
2023-11-01 04:53:09 +00:00
discard request "Deposit root":
ns.get_deposit_root.call(blockNumber = latestBlock.number)