status-im
/
nimbus-eth2
mirror of https://github.com/status-im/nimbus-eth2.git
2
0
Fork 0
Code Issues Projects Releases Wiki Activity
nimbus-eth2/tests/test_gossip_validation.nim

270 lines
10 KiB
Nim
Raw Normal View History

remove attestation/aggregate queue (#2519) With the introduction of batching and lazy attestation aggregation, it no longer makes sense to enqueue attestations between the signature check and adding them to the attestation pool - this only takes up valuable CPU without any real benefit. * add successfully validated attestations to attestion pool directly * avoid copying participant list around for single-vote attestations, pass single validator index instead * release decompressed gossip memory earlier, specially during async message validation * use cooked signatures in a few more places to avoid reloads and errors * remove some Defect-raising versions of signature-loading * release decompressed data memory before validating message
2021-04-26 20:39:44 +00:00
# beacon_chain
# Copyright (c) 2018-2021 Status Research & Development GmbH
# Licensed and distributed under either of
# * MIT license (license terms in the root directory or at https://opensource.org/licenses/MIT).
# * Apache v2 license (license terms in the root directory or at https://www.apache.org/licenses/LICENSE-2.0).
# at your option. This file may not be copied, modified, or distributed except according to those terms.
{.used.}
import
handle duplicate pubkeys in sync committee (#2902) When sync committee message handling was introduced in #2830, the edge case of the same validator being selected multiple times as part of a sync subcommittee was not covered. Not handling that edge case makes sync contributions have a lower-than-expected participation rate as each sync validator is only counted up through once per subcommittee. This patch ensures that this edge case is properly covered.
2021-09-28 07:44:20 +00:00
# Standard library
std/sequtils,
remove attestation/aggregate queue (#2519) With the introduction of batching and lazy attestation aggregation, it no longer makes sense to enqueue attestations between the signature check and adding them to the attestation pool - this only takes up valuable CPU without any real benefit. * add successfully validated attestations to attestion pool directly * avoid copying participant list around for single-vote attestations, pass single validator index instead * release decompressed gossip memory earlier, specially during async message validation * use cooked signatures in a few more places to avoid reloads and errors * remove some Defect-raising versions of signature-loading * release decompressed data memory before validating message
2021-04-26 20:39:44 +00:00
# Status lib
unittest2,
disentangle eth2 types from the ssz library (#2785) * reorganize ssz dependencies This PR continues the work in https://github.com/status-im/nimbus-eth2/pull/2646, https://github.com/status-im/nimbus-eth2/pull/2779 as well as past issues with serialization and type, to disentangle SSZ from eth2 and at the same time simplify imports and exports with a structured approach. The principal idea here is that when a library wants to introduce SSZ support, they do so via 3 files: * `ssz_codecs` which imports and reexports `codecs` - this covers the basic byte conversions and ensures no overloads get lost * `xxx_merkleization` imports and exports `merkleization` to specialize and get access to `hash_tree_root` and friends * `xxx_ssz_serialization` imports and exports `ssz_serialization` to specialize ssz for a specific library Those that need to interact with SSZ always import the `xxx_` versions of the modules and never `ssz` itself so as to keep imports simple and safe. This is similar to how the REST / JSON-RPC serializers are structured in that someone wanting to serialize spec types to REST-JSON will import `eth2_rest_serialization` and nothing else. * split up ssz into a core library that is independendent of eth2 types * rename `bytes_reader` to `codec` to highlight that it contains coding and decoding of bytes and native ssz types * remove tricky List init overload that causes compile issues * get rid of top-level ssz import * reenable merkleization tests * move some "standard" json serializers to spec * remove `ValidatorIndex` serialization for now * remove test_ssz_merkleization * add tests for over/underlong byte sequences * fix broken seq[byte] test - seq[byte] is not an SSZ type There are a few things this PR doesn't solve: * like #2646 this PR is weak on how to handle root and other dontSerialize fields that "sometimes" should be computed - the same problem appears in REST / JSON-RPC etc * Fix a build problem on macOS * Another way to fix the macOS builds Co-authored-by: Zahary Karadjov <zahary@gmail.com>
2021-08-18 18:57:58 +00:00
chronicles, chronos,
Parallel attestation verification (#2718) * Add parallel attestation verification * Update tests, batchVerify doesn't use the threadpool with only single core (nim-blscurve update) * bump nim-blscurve * Debug info for failing eth2 test vectors * remove submodule eth2-testnets * verbose debugging of make failure on Windows (libbacktrace?) * Remove CI debug mode * initialization convention * Fix new altair tests
2021-09-17 00:13:52 +00:00
eth/keys, taskpools,
remove attestation/aggregate queue (#2519) With the introduction of batching and lazy attestation aggregation, it no longer makes sense to enqueue attestations between the signature check and adding them to the attestation pool - this only takes up valuable CPU without any real benefit. * add successfully validated attestations to attestion pool directly * avoid copying participant list around for single-vote attestations, pass single validator index instead * release decompressed gossip memory earlier, specially during async message validation * use cooked signatures in a few more places to avoid reloads and errors * remove some Defect-raising versions of signature-loading * release decompressed data memory before validating message
2021-04-26 20:39:44 +00:00
# Internal
import cleanup (#2997) * import cleanup ...and remove some unused types * add random imports * more imports
2021-10-19 14:09:26 +00:00
../beacon_chain/[beacon_clock],
remove attestation/aggregate queue (#2519) With the introduction of batching and lazy attestation aggregation, it no longer makes sense to enqueue attestations between the signature check and adding them to the attestation pool - this only takes up valuable CPU without any real benefit. * add successfully validated attestations to attestion pool directly * avoid copying participant list around for single-vote attestations, pass single validator index instead * release decompressed gossip memory earlier, specially during async message validation * use cooked signatures in a few more places to avoid reloads and errors * remove some Defect-raising versions of signature-loading * release decompressed data memory before validating message
2021-04-26 20:39:44 +00:00
../beacon_chain/gossip_processing/[gossip_validation, batch_validation],
../beacon_chain/fork_choice/[fork_choice_types, fork_choice],
../beacon_chain/consensus_object_pools/[
handle duplicate pubkeys in sync committee (#2902) When sync committee message handling was introduced in #2830, the edge case of the same validator being selected multiple times as part of a sync subcommittee was not covered. Not handling that edge case makes sync contributions have a lower-than-expected participation rate as each sync validator is only counted up through once per subcommittee. This patch ensures that this edge case is properly covered.
2021-09-28 07:44:20 +00:00
block_quarantine, blockchain_dag, block_clearance, attestation_pool,
sync_committee_msg_pool],
../beacon_chain/spec/datatypes/[phase0, altair],
altair fork handling cleanups (#3050) * fix stack overflow crash in REST/debug/getStateV2 * introduce `ForkyXxx` for generic type matching of `Xxx` across branches (SomeHashedBeaconState -> ForkyHashedBeaconState et al) - `Some` is already used for other types of type classes * consolidate function naming in BeaconChainDB, use some generics * import `forks.nim` from other spec modules and move `Forked*` helpers around to resolve circular imports * remove `ForkedBeaconState`, use `ForkedHashedBeaconState` throughout (less data shuffling between the types) * fix several cases of states being stored on stack in tests, causing random failures on some platforms * remove reading json support from ncli - this should be ported to the rest json reading instead (doesn't currently work because stack sizes)
2021-11-05 07:34:34 +00:00
../beacon_chain/spec/[state_transition, helpers, network, validator],
handle duplicate pubkeys in sync committee (#2902) When sync committee message handling was introduced in #2830, the edge case of the same validator being selected multiple times as part of a sync subcommittee was not covered. Not handling that edge case makes sync contributions have a lower-than-expected participation rate as each sync validator is only counted up through once per subcommittee. This patch ensures that this edge case is properly covered.
2021-09-28 07:44:20 +00:00
../beacon_chain/validators/validator_pool,
remove attestation/aggregate queue (#2519) With the introduction of batching and lazy attestation aggregation, it no longer makes sense to enqueue attestations between the signature check and adding them to the attestation pool - this only takes up valuable CPU without any real benefit. * add successfully validated attestations to attestion pool directly * avoid copying participant list around for single-vote attestations, pass single validator index instead * release decompressed gossip memory earlier, specially during async message validation * use cooked signatures in a few more places to avoid reloads and errors * remove some Defect-raising versions of signature-loading * release decompressed data memory before validating message
2021-04-26 20:39:44 +00:00
# Test utilities
Introduce unittest2 and junit reports (#2522) * Introduce unittest2 and junit reports * fix XML path * don't combine multiple CI runs * fixup * public combined report also Co-authored-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
2021-04-28 16:41:02 +00:00
./testutil, ./testdbutil, ./testblockutil
remove attestation/aggregate queue (#2519) With the introduction of batching and lazy attestation aggregation, it no longer makes sense to enqueue attestations between the signature check and adding them to the attestation pool - this only takes up valuable CPU without any real benefit. * add successfully validated attestations to attestion pool directly * avoid copying participant list around for single-vote attestations, pass single validator index instead * release decompressed gossip memory earlier, specially during async message validation * use cooked signatures in a few more places to avoid reloads and errors * remove some Defect-raising versions of signature-loading * release decompressed data memory before validating message
2021-04-26 20:39:44 +00:00
proc pruneAtFinalization(dag: ChainDAGRef, attPool: AttestationPool) =
if dag.needStateCachesAndForkChoicePruning():
dag.pruneStateCachesDAG()
# pool[].prune() # We test logic without att_1_0 pool / fork choice pruning
Introduce unittest2 and junit reports (#2522) * Introduce unittest2 and junit reports * fix XML path * don't combine multiple CI runs * fixup * public combined report also Co-authored-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
2021-04-28 16:41:02 +00:00
suite "Gossip validation " & preset():
remove attestation/aggregate queue (#2519) With the introduction of batching and lazy attestation aggregation, it no longer makes sense to enqueue attestations between the signature check and adding them to the attestation pool - this only takes up valuable CPU without any real benefit. * add successfully validated attestations to attestion pool directly * avoid copying participant list around for single-vote attestations, pass single validator index instead * release decompressed gossip memory earlier, specially during async message validation * use cooked signatures in a few more places to avoid reloads and errors * remove some Defect-raising versions of signature-loading * release decompressed data memory before validating message
2021-04-26 20:39:44 +00:00
setup:
# Genesis state that results in 3 members per committee
var
Validator monitoring (#2925) Validator monitoring based on and mostly compatible with the implementation in Lighthouse - tracks additional logs and metrics for specified validators so as to stay on top on performance. The implementation works more or less the following way: * Validator pubkeys are singled out for monitoring - these can be running on the node or not * For every action that the validator takes, we record steps in the process such as messages being seen on the network or published in the API * When the dust settles at the end of an epoch, we report the information from one epoch before that, which coincides with the balances being updated - this is a tradeoff between being correct (waiting for finalization) and providing relevant information in a timely manner)
2021-12-20 19:20:31 +00:00
validatorMonitor = newClone(ValidatorMonitor.init())
dag = init(
ChainDAGRef, defaultRuntimeConfig, makeTestDB(SLOTS_PER_EPOCH * 3),
validatorMonitor, {})
Parallel attestation verification (#2718) * Add parallel attestation verification * Update tests, batchVerify doesn't use the threadpool with only single core (nim-blscurve update) * bump nim-blscurve * Debug info for failing eth2 test vectors * remove submodule eth2-testnets * verbose debugging of make failure on Windows (libbacktrace?) * Remove CI debug mode * initialization convention * Fix new altair tests
2021-09-17 00:13:52 +00:00
taskpool = Taskpool.new()
move quarantine outside of chaindag (#3124) * move quarantine outside of chaindag The quarantine has been part of the ChainDAG for the longest time, but this design has a few issues: * the function in which blocks are verified and added to the dag becomes reentrant and therefore difficult to reason about - we're currently using a stateful flag to work around it * quarantined blocks bypass the processing queue leading to a processing stampede * the quarantine flow is unsuitable for orphaned attestations - these should also should be quarantined eventually Instead of processing the quarantine inside ChainDAG, this PR moves re-queueing to `block_processor` which already is responsible for dealing with follow-up work when a block is added to the dag This sets the stage for keeping attestations in the quarantine as well. Also: * make `BlockError` `{.pure.}` * avoid use of `ValidationResult` in block clearance (that's for gossip)
2021-12-06 09:49:01 +00:00
verifier = BatchVerifier(rng: keys.newRng(), taskpool: taskpool)
quarantine = newClone(Quarantine.init())
singe validator key cache Instead of keeping a validator key list per EpochRef, this PR introduces a single shared validator key list in ChainDAG, and cleans up some other ChainDAG and key-related issues. The PR does not introduce the validator key list in the state transition - this is because we batch-check all signatures before entering the spec code, thus the spec code never hits the cache. A future refactor should _probably_ remove the threadvar altogether. There's a few other small fixes in here that make the flow easier to read: * fix `var ChainDAGRef` -> `ChainDAGRef` * fix `var QuarantineRef` -> `QuarantineRef` * consistent `dag` variable name * avoid using threadvar pubkey cache in most cases * better error messages in batch signature checking
2021-06-01 11:13:40 +00:00
pool = newClone(AttestationPool.init(dag, quarantine))
state = newClone(dag.headState)
remove attestation/aggregate queue (#2519) With the introduction of batching and lazy attestation aggregation, it no longer makes sense to enqueue attestations between the signature check and adding them to the attestation pool - this only takes up valuable CPU without any real benefit. * add successfully validated attestations to attestion pool directly * avoid copying participant list around for single-vote attestations, pass single validator index instead * release decompressed gossip memory earlier, specially during async message validation * use cooked signatures in a few more places to avoid reloads and errors * remove some Defect-raising versions of signature-loading * release decompressed data memory before validating message
2021-04-26 20:39:44 +00:00
cache = StateCache()
reward accounting for altair+ (#2981) Similar to the existing `RewardInfo`, this PR adds the infrastructure needed to export epoch processing information from altair+. Because accounting is done somewhat differently, the PR uses a fork-specific object to extrct the information in order to make the cost on the spec side low. * RewardInfo -> EpochInfo, ForkedEpochInfo * use array for computing new sync committee * avoid repeated total active balance computations in block processing * simplify proposer index check * simplify epoch transition tests * pre-compute base increment and reuse in epoch processing, and a few other small optimizations This PR introduces the type and does the heavy lifting in terms of refactoring - the tools that use the accounting will need separate PR:s (as well as refinements to the exportred information)
2021-10-13 14:24:36 +00:00
info = ForkedEpochInfo()
Parallel attestation verification (#2718) * Add parallel attestation verification * Update tests, batchVerify doesn't use the threadpool with only single core (nim-blscurve update) * bump nim-blscurve * Debug info for failing eth2 test vectors * remove submodule eth2-testnets * verbose debugging of make failure on Windows (libbacktrace?) * Remove CI debug mode * initialization convention * Fix new altair tests
2021-09-17 00:13:52 +00:00
batchCrypto = BatchCrypto.new(keys.newRng(), eager = proc(): bool = false, taskpool)
remove attestation/aggregate queue (#2519) With the introduction of batching and lazy attestation aggregation, it no longer makes sense to enqueue attestations between the signature check and adding them to the attestation pool - this only takes up valuable CPU without any real benefit. * add successfully validated attestations to attestion pool directly * avoid copying participant list around for single-vote attestations, pass single validator index instead * release decompressed gossip memory earlier, specially during async message validation * use cooked signatures in a few more places to avoid reloads and errors * remove some Defect-raising versions of signature-loading * release decompressed data memory before validating message
2021-04-26 20:39:44 +00:00
# Slot 0 is a finalized slot - won't be making attestations for it..
check:
use ForkedHashedBeaconState in StateData (#2634) * use ForkedHashedBeaconState in StateData * fix FAR_FUTURE_EPOCH -> slot overflow; almost always use assign() * avoid stack allocation in maybeUpgradeStateToAltair() * create and use dispatch functions for check_attester_slashing(), check_proposer_slashing(), and check_voluntary_exit() * use getStateRoot() instead of various state.data.hbsPhase0.root * remove withStateVars.hashedState(), which doesn't work as a design anymore * introduce spec/datatypes/altair into beacon_chain_db * fix inefficient codegen for getStateField(largeStateField) * state_transition_slots() doesn't either need/use blocks or runtime presets * combine process_slots(HBS)/state_transition_slots(HBS) which differ only in last-slot htr optimization * getStateField(StateData, ...) was replaced by getStateField(ForkedHashedBeaconState, ...) * fix rollback * switch some state_transition(), process_slots, makeTestBlocks(), etc to use ForkedHashedBeaconState * remove state_transition(phase0.HashedBeaconState) * remove process_slots(phase0.HashedBeaconState) * remove state_transition_block(phase0.HashedBeaconState) * remove unused callWithBS(); separate case expression from if statement * switch back from nested-ref-object construction to (ref Foo)(Bar())
2021-06-11 17:51:46 +00:00
process_slots(
Implement split preset/config support (#2710) * Implement split preset/config support This is the initial bulk refactor to introduce runtime config values in a number of places, somewhat replacing the existing mechanism of loading network metadata. It still needs more work, this is the initial refactor that introduces runtime configuration in some of the places that need it. The PR changes the way presets and constants work, to match the spec. In particular, a "preset" now refers to the compile-time configuration while a "cfg" or "RuntimeConfig" is the dynamic part. A single binary can support either mainnet or minimal, but not both. Support for other presets has been removed completely (can be readded, in case there's need). There's a number of outstanding tasks: * `SECONDS_PER_SLOT` still needs fixing * loading custom runtime configs needs redoing * checking constants against YAML file * yeerongpilly support `build/nimbus_beacon_node --network=yeerongpilly --discv5:no --log-level=DEBUG` * load fork epoch from config * fix fork digest sent in status * nicer error string for request failures * fix tools * one more * fixup * fixup * fixup * use "standard" network definition folder in local testnet Files are loaded from their standard locations, including genesis etc, to conform to the format used in the `eth2-networks` repo. * fix launch scripts, allow unknown config values * fix base config of rest test * cleanups * bundle mainnet config using common loader * fix spec links and names * only include supported preset in binary * drop yeerongpilly, add altair-devnet-0, support boot_enr.yaml
2021-07-12 13:01:38 +00:00
defaultRuntimeConfig, state.data, getStateField(state.data, slot) + 1,
reward accounting for altair+ (#2981) Similar to the existing `RewardInfo`, this PR adds the infrastructure needed to export epoch processing information from altair+. Because accounting is done somewhat differently, the PR uses a fork-specific object to extrct the information in order to make the cost on the spec side low. * RewardInfo -> EpochInfo, ForkedEpochInfo * use array for computing new sync committee * avoid repeated total active balance computations in block processing * simplify proposer index check * simplify epoch transition tests * pre-compute base increment and reuse in epoch processing, and a few other small optimizations This PR introduces the type and does the heavy lifting in terms of refactoring - the tools that use the accounting will need separate PR:s (as well as refinements to the exportred information)
2021-10-13 14:24:36 +00:00
cache, info, {})
remove attestation/aggregate queue (#2519) With the introduction of batching and lazy attestation aggregation, it no longer makes sense to enqueue attestations between the signature check and adding them to the attestation pool - this only takes up valuable CPU without any real benefit. * add successfully validated attestations to attestion pool directly * avoid copying participant list around for single-vote attestations, pass single validator index instead * release decompressed gossip memory earlier, specially during async message validation * use cooked signatures in a few more places to avoid reloads and errors * remove some Defect-raising versions of signature-loading * release decompressed data memory before validating message
2021-04-26 20:39:44 +00:00
add sync committee types and some helpers (#2829)
2021-08-28 09:00:00 +00:00
test "Any committee index is valid":
template committee(idx: uint64): untyped =
get_beacon_committee(
dag.headState.data, dag.head.slot, idx.CommitteeIndex, cache)
template committeeLen(idx: uint64): untyped =
get_beacon_committee_len(
dag.headState.data, dag.head.slot, idx.CommitteeIndex, cache)
check:
committee(0).len > 0
committee(10000).len == 0
committee(uint64.high).len == 0
check:
committeeLen(2) > 0
committeeLen(10000) == 0
committeeLen(uint64.high) == 0
Speed up altair block processing 2x (#3115) * Speed up altair block processing >2x Like #3089, this PR drastially speeds up historical REST queries and other long state replays. * cache sync committee validator indices * use ~80mb less memory for validator pubkey mappings * batch-verify sync aggregate signature (fixes #2985) * document sync committee hack with head block vs sync message block * add batch signature verification failure tests Before: ``` ../env.sh nim c -d:release -r ncli_db --db:mainnet_0/db bench --start-slot:-1000 All time are ms Average, StdDev, Min, Max, Samples, Test Validation is turned off meaning that no BLS operations are performed 5830.675, 0.000, 5830.675, 5830.675, 1, Initialize DB 0.481, 1.878, 0.215, 59.167, 981, Load block from database 8422.566, 0.000, 8422.566, 8422.566, 1, Load state from database 6.996, 1.678, 0.042, 14.385, 969, Advance slot, non-epoch 93.217, 8.318, 84.192, 122.209, 32, Advance slot, epoch 20.513, 23.665, 11.510, 201.561, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` After: ``` 7081.422, 0.000, 7081.422, 7081.422, 1, Initialize DB 0.553, 2.122, 0.175, 66.692, 981, Load block from database 5439.446, 0.000, 5439.446, 5439.446, 1, Load state from database 6.829, 1.575, 0.043, 12.156, 969, Advance slot, non-epoch 94.716, 2.749, 88.395, 100.026, 32, Advance slot, epoch 11.636, 23.766, 4.889, 205.250, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` * add comment
2021-11-24 12:43:50 +00:00
test "validateAttestation":
remove attestation/aggregate queue (#2519) With the introduction of batching and lazy attestation aggregation, it no longer makes sense to enqueue attestations between the signature check and adding them to the attestation pool - this only takes up valuable CPU without any real benefit. * add successfully validated attestations to attestion pool directly * avoid copying participant list around for single-vote attestations, pass single validator index instead * release decompressed gossip memory earlier, specially during async message validation * use cooked signatures in a few more places to avoid reloads and errors * remove some Defect-raising versions of signature-loading * release decompressed data memory before validating message
2021-04-26 20:39:44 +00:00
var
cache: StateCache
for blck in makeTestBlocks(
ncli_db: add putState, putBlock (#3096) * ncli_db: add putState, putBlock These tools allow modifying an existing nimbus database for the purpose of recovery or reorg, moving the head, tail and genesis to arbitrary points. * remove potentially expensive `putState` in `BeaconStateDB` * introduce `latest_block_root` which computes the root of the latest applied block from the `latest_block_header` field (instead of passing it in separately) * avoid some unnecessary BeaconState copies during init * discover https://github.com/nim-lang/Nim/issues/19094 * prefer `HashedBeaconState` in a few places to avoid recomputing state root * fetch latest block root from state when creating blocks * harden `get_beacon_proposer_index` against invalid slots and document * move random spec function tests to `test_spec.nim` * avoid unnecessary state root computation before block proposal
2021-11-18 12:02:43 +00:00
dag.headState.data, cache, int(SLOTS_PER_EPOCH * 5), false):
Backfill support for ChainDAG (#3171) In the ChainDAG, 3 block pointers are kept: genesis, tail and head. This PR adds one more block pointer: the backfill block which represents the block that has been backfilled so far. When doing a checkpoint sync, a random block is given as starting point - this is the tail block, and we require that the tail block has a corresponding state. When backfilling, we end up with blocks without corresponding states, hence we cannot use `tail` as a backfill pointer - there is no state. Nonetheless, we need to keep track of where we are in the backfill process between restarts, such that we can answer GetBeaconBlocksByRange requests. This PR adds the basic support for backfill handling - it needs to be integrated with backfill sync, and the REST API needs to be adjusted to take advantage of the new backfilled blocks when responding to certain requests. Future work will also enable moving the tail in either direction: * pruning means moving the tail forward in time and removing states * backwards means recreating past states from genesis, such that intermediate states are recreated step by step all the way to the tail - at that point, tail, genesis and backfill will match up. * backfilling is done when backfill != genesis - later, this will be the WSS checkpoint instead
2021-12-13 13:36:06 +00:00
let added = dag.addHeadBlock(verifier, blck.phase0Data) do (
rework spec imports (#2779) The spec imports are a mess to work with, so this branch cleans them up a bit to ensure that we avoid generic sandwitches and that importing stuff generally becomes easier. * reexport crypto/digest/presets because these are part of the public symbol set of the rest of the spec types * don't export `merge` types from `base` - this causes circular deps * fix circular deps in `ssz/spec_types` - this is the first step in disentangling ssz from spec * be explicit about phase0 vs altair - longer term, `altair` will become the "natural" type set, then merge and so on, so no point in giving `phase0` special preferential treatment
2021-08-12 13:08:20 +00:00
blckRef: BlockRef, signedBlock: phase0.TrustedSignedBeaconBlock,
remove false OnBlockAdded dependency on phase0 HashedBeaconState (#2661) * remove false OnBlockAdded dependency on phase.HashedBeaconState * introduce altair data types into block_clearance; update some alpha.6 spec refs to alpha.7; add get_active_validator_indices_len ForkedHashedBeaconState wrapper * switch many modules from using datatypes (with phase0 states/blocks) to datatypes/base (fork-independent); update spec refs from alpha.6 to alpha.7 and remove rm'd G2_POINT_AT_INFINITY * switch more modules from using datatypes (with phase0 states/blocks) to datatypes/base (fork-independent); update spec refs from alpha.6 to alpha.7 * remove unnecessary phase0-only wrapper of get_attesting_indices(); allow signatures_batch to process either fork; remove O(n^2) nested loop in process_inactivity_updates(); add altair support to getAttestationsforTestBlock() * add Altair versions of asSigVerified(), asTrusted(), and makeBeaconBlock() * fix spec URL to be Altair for Altair makeBeaconBlock()
2021-06-21 08:35:24 +00:00
epochRef: EpochRef):
remove attestation/aggregate queue (#2519) With the introduction of batching and lazy attestation aggregation, it no longer makes sense to enqueue attestations between the signature check and adding them to the attestation pool - this only takes up valuable CPU without any real benefit. * add successfully validated attestations to attestion pool directly * avoid copying participant list around for single-vote attestations, pass single validator index instead * release decompressed gossip memory earlier, specially during async message validation * use cooked signatures in a few more places to avoid reloads and errors * remove some Defect-raising versions of signature-loading * release decompressed data memory before validating message
2021-04-26 20:39:44 +00:00
# Callback add to fork choice if valid
use BeaconTime instead of Slot in fork choice (#3138) * use v1.1.6 test vectors; use BeaconTime instead of Slot in fork choice * tick through every slot at least once * use div INTERVALS_PER_SLOT and use precomputed constants of them * use correct (even if numerically equal) constant
2021-12-21 18:56:08 +00:00
pool[].addForkChoice(
epochRef, blckRef, signedBlock.message, blckRef.slot.toBeaconTime)
remove attestation/aggregate queue (#2519) With the introduction of batching and lazy attestation aggregation, it no longer makes sense to enqueue attestations between the signature check and adding them to the attestation pool - this only takes up valuable CPU without any real benefit. * add successfully validated attestations to attestion pool directly * avoid copying participant list around for single-vote attestations, pass single validator index instead * release decompressed gossip memory earlier, specially during async message validation * use cooked signatures in a few more places to avoid reloads and errors * remove some Defect-raising versions of signature-loading * release decompressed data memory before validating message
2021-04-26 20:39:44 +00:00
check: added.isOk()
move quarantine outside of chaindag (#3124) * move quarantine outside of chaindag The quarantine has been part of the ChainDAG for the longest time, but this design has a few issues: * the function in which blocks are verified and added to the dag becomes reentrant and therefore difficult to reason about - we're currently using a stateful flag to work around it * quarantined blocks bypass the processing queue leading to a processing stampede * the quarantine flow is unsuitable for orphaned attestations - these should also should be quarantined eventually Instead of processing the quarantine inside ChainDAG, this PR moves re-queueing to `block_processor` which already is responsible for dealing with follow-up work when a block is added to the dag This sets the stage for keeping attestations in the quarantine as well. Also: * make `BlockError` `{.pure.}` * avoid use of `ValidationResult` in block clearance (that's for gossip)
2021-12-06 09:49:01 +00:00
dag.updateHead(added[], quarantine[])
singe validator key cache Instead of keeping a validator key list per EpochRef, this PR introduces a single shared validator key list in ChainDAG, and cleans up some other ChainDAG and key-related issues. The PR does not introduce the validator key list in the state transition - this is because we batch-check all signatures before entering the spec code, thus the spec code never hits the cache. A future refactor should _probably_ remove the threadvar altogether. There's a few other small fixes in here that make the flow easier to read: * fix `var ChainDAGRef` -> `ChainDAGRef` * fix `var QuarantineRef` -> `QuarantineRef` * consistent `dag` variable name * avoid using threadvar pubkey cache in most cases * better error messages in batch signature checking
2021-06-01 11:13:40 +00:00
pruneAtFinalization(dag, pool[])
remove attestation/aggregate queue (#2519) With the introduction of batching and lazy attestation aggregation, it no longer makes sense to enqueue attestations between the signature check and adding them to the attestation pool - this only takes up valuable CPU without any real benefit. * add successfully validated attestations to attestion pool directly * avoid copying participant list around for single-vote attestations, pass single validator index instead * release decompressed gossip memory earlier, specially during async message validation * use cooked signatures in a few more places to avoid reloads and errors * remove some Defect-raising versions of signature-loading * release decompressed data memory before validating message
2021-04-26 20:39:44 +00:00
var
# Create attestations for slot 1
beacon_committee = get_beacon_committee(
use ForkedHashedBeaconState in StateData (#2634) * use ForkedHashedBeaconState in StateData * fix FAR_FUTURE_EPOCH -> slot overflow; almost always use assign() * avoid stack allocation in maybeUpgradeStateToAltair() * create and use dispatch functions for check_attester_slashing(), check_proposer_slashing(), and check_voluntary_exit() * use getStateRoot() instead of various state.data.hbsPhase0.root * remove withStateVars.hashedState(), which doesn't work as a design anymore * introduce spec/datatypes/altair into beacon_chain_db * fix inefficient codegen for getStateField(largeStateField) * state_transition_slots() doesn't either need/use blocks or runtime presets * combine process_slots(HBS)/state_transition_slots(HBS) which differ only in last-slot htr optimization * getStateField(StateData, ...) was replaced by getStateField(ForkedHashedBeaconState, ...) * fix rollback * switch some state_transition(), process_slots, makeTestBlocks(), etc to use ForkedHashedBeaconState * remove state_transition(phase0.HashedBeaconState) * remove process_slots(phase0.HashedBeaconState) * remove state_transition_block(phase0.HashedBeaconState) * remove unused callWithBS(); separate case expression from if statement * switch back from nested-ref-object construction to (ref Foo)(Bar())
2021-06-11 17:51:46 +00:00
dag.headState.data, dag.head.slot, 0.CommitteeIndex, cache)
remove attestation/aggregate queue (#2519) With the introduction of batching and lazy attestation aggregation, it no longer makes sense to enqueue attestations between the signature check and adding them to the attestation pool - this only takes up valuable CPU without any real benefit. * add successfully validated attestations to attestion pool directly * avoid copying participant list around for single-vote attestations, pass single validator index instead * release decompressed gossip memory earlier, specially during async message validation * use cooked signatures in a few more places to avoid reloads and errors * remove some Defect-raising versions of signature-loading * release decompressed data memory before validating message
2021-04-26 20:39:44 +00:00
att_1_0 = makeAttestation(
use ForkedHashedBeaconState in StateData (#2634) * use ForkedHashedBeaconState in StateData * fix FAR_FUTURE_EPOCH -> slot overflow; almost always use assign() * avoid stack allocation in maybeUpgradeStateToAltair() * create and use dispatch functions for check_attester_slashing(), check_proposer_slashing(), and check_voluntary_exit() * use getStateRoot() instead of various state.data.hbsPhase0.root * remove withStateVars.hashedState(), which doesn't work as a design anymore * introduce spec/datatypes/altair into beacon_chain_db * fix inefficient codegen for getStateField(largeStateField) * state_transition_slots() doesn't either need/use blocks or runtime presets * combine process_slots(HBS)/state_transition_slots(HBS) which differ only in last-slot htr optimization * getStateField(StateData, ...) was replaced by getStateField(ForkedHashedBeaconState, ...) * fix rollback * switch some state_transition(), process_slots, makeTestBlocks(), etc to use ForkedHashedBeaconState * remove state_transition(phase0.HashedBeaconState) * remove process_slots(phase0.HashedBeaconState) * remove state_transition_block(phase0.HashedBeaconState) * remove unused callWithBS(); separate case expression from if statement * switch back from nested-ref-object construction to (ref Foo)(Bar())
2021-06-11 17:51:46 +00:00
dag.headState.data, dag.head.root, beacon_committee[0], cache)
remove attestation/aggregate queue (#2519) With the introduction of batching and lazy attestation aggregation, it no longer makes sense to enqueue attestations between the signature check and adding them to the attestation pool - this only takes up valuable CPU without any real benefit. * add successfully validated attestations to attestion pool directly * avoid copying participant list around for single-vote attestations, pass single validator index instead * release decompressed gossip memory earlier, specially during async message validation * use cooked signatures in a few more places to avoid reloads and errors * remove some Defect-raising versions of signature-loading * release decompressed data memory before validating message
2021-04-26 20:39:44 +00:00
att_1_1 = makeAttestation(
use ForkedHashedBeaconState in StateData (#2634) * use ForkedHashedBeaconState in StateData * fix FAR_FUTURE_EPOCH -> slot overflow; almost always use assign() * avoid stack allocation in maybeUpgradeStateToAltair() * create and use dispatch functions for check_attester_slashing(), check_proposer_slashing(), and check_voluntary_exit() * use getStateRoot() instead of various state.data.hbsPhase0.root * remove withStateVars.hashedState(), which doesn't work as a design anymore * introduce spec/datatypes/altair into beacon_chain_db * fix inefficient codegen for getStateField(largeStateField) * state_transition_slots() doesn't either need/use blocks or runtime presets * combine process_slots(HBS)/state_transition_slots(HBS) which differ only in last-slot htr optimization * getStateField(StateData, ...) was replaced by getStateField(ForkedHashedBeaconState, ...) * fix rollback * switch some state_transition(), process_slots, makeTestBlocks(), etc to use ForkedHashedBeaconState * remove state_transition(phase0.HashedBeaconState) * remove process_slots(phase0.HashedBeaconState) * remove state_transition_block(phase0.HashedBeaconState) * remove unused callWithBS(); separate case expression from if statement * switch back from nested-ref-object construction to (ref Foo)(Bar())
2021-06-11 17:51:46 +00:00
dag.headState.data, dag.head.root, beacon_committee[1], cache)
remove attestation/aggregate queue (#2519) With the introduction of batching and lazy attestation aggregation, it no longer makes sense to enqueue attestations between the signature check and adding them to the attestation pool - this only takes up valuable CPU without any real benefit. * add successfully validated attestations to attestion pool directly * avoid copying participant list around for single-vote attestations, pass single validator index instead * release decompressed gossip memory earlier, specially during async message validation * use cooked signatures in a few more places to avoid reloads and errors * remove some Defect-raising versions of signature-loading * release decompressed data memory before validating message
2021-04-26 20:39:44 +00:00
committees_per_slot =
use ForkedHashedBeaconState in StateData (#2634) * use ForkedHashedBeaconState in StateData * fix FAR_FUTURE_EPOCH -> slot overflow; almost always use assign() * avoid stack allocation in maybeUpgradeStateToAltair() * create and use dispatch functions for check_attester_slashing(), check_proposer_slashing(), and check_voluntary_exit() * use getStateRoot() instead of various state.data.hbsPhase0.root * remove withStateVars.hashedState(), which doesn't work as a design anymore * introduce spec/datatypes/altair into beacon_chain_db * fix inefficient codegen for getStateField(largeStateField) * state_transition_slots() doesn't either need/use blocks or runtime presets * combine process_slots(HBS)/state_transition_slots(HBS) which differ only in last-slot htr optimization * getStateField(StateData, ...) was replaced by getStateField(ForkedHashedBeaconState, ...) * fix rollback * switch some state_transition(), process_slots, makeTestBlocks(), etc to use ForkedHashedBeaconState * remove state_transition(phase0.HashedBeaconState) * remove process_slots(phase0.HashedBeaconState) * remove state_transition_block(phase0.HashedBeaconState) * remove unused callWithBS(); separate case expression from if statement * switch back from nested-ref-object construction to (ref Foo)(Bar())
2021-06-11 17:51:46 +00:00
get_committee_count_per_slot(dag.headState.data,
use StateData in place of BeaconState outside state transition code (#2551) * use StateData in place of BeaconState outside state transition code * propagate more StateData usage * remove withStateVars().state * wrap get_beacon_committee(BeaconState, ...) as gbc(StateData, ...) * switch makeAttestation() to use StateData * use StateData wrapper/dispatcher for get_committee_count_per_slot() * convert AttestationCache.init(), weak subjectivity functions, and updateValidatorMetrics() * add get_shuffled_active_validator_indices(StateData) and get_block_root_at_slot(StateData) * switch makeAttestationData() to StateData * sync AllTests-mainnet.md after rebase
2021-05-21 09:23:28 +00:00
att_1_0.data.slot.epoch, cache)
remove attestation/aggregate queue (#2519) With the introduction of batching and lazy attestation aggregation, it no longer makes sense to enqueue attestations between the signature check and adding them to the attestation pool - this only takes up valuable CPU without any real benefit. * add successfully validated attestations to attestion pool directly * avoid copying participant list around for single-vote attestations, pass single validator index instead * release decompressed gossip memory earlier, specially during async message validation * use cooked signatures in a few more places to avoid reloads and errors * remove some Defect-raising versions of signature-loading * release decompressed data memory before validating message
2021-04-26 20:39:44 +00:00
subnet = compute_subnet_for_attestation(
committees_per_slot,
att_1_0.data.slot, att_1_0.data.index.CommitteeIndex)
beaconTime = att_1_0.data.slot.toBeaconTime()
check:
validateAttestation(pool, batchCrypto, att_1_0, beaconTime, subnet, true).waitFor().isOk
# Same validator again
validateAttestation(pool, batchCrypto, att_1_0, beaconTime, subnet, true).waitFor().error()[0] ==
ValidationResult.Ignore
pool[].nextAttestationEpoch.setLen(0) # reset for test
check:
# Wrong subnet
Perform attestation check before broadcast (#2550) Currently, we have a bit of a convoluted flow where when sending attestations, we start broadcasting them over gossip then pass them to the attestation validation to include them in the local attestation pool - it should be the other way around: we should be checking attestations _before_ gossipping them - this serves as an additional safety net to ensure that we don't publish junk - this becomes more important when publishing attestations from the API. Also, the REST API was performing its own validation meaning attestations coming from REST would be validated twice - finally, the JSON RPC wasn't pre-validating and would happily broadcast invalid attestations. * Unified attestation production pipeline with the same flow for gossip, locally and API-produced attestations: all are now validated and entered into the pool, then broadcast/republished * Refactor subnet handling with specific SubnetId alias, streamlining where subnets are computed, avoiding the need to pass around the number of active validators * Move some of the subnet handling code to eth2_network * Use BitArray throughout for subnet handling
2021-05-10 07:13:36 +00:00
validateAttestation(
pool, batchCrypto, att_1_0, beaconTime, SubnetId(subnet.uint8 + 1), true).waitFor().isErr
remove attestation/aggregate queue (#2519) With the introduction of batching and lazy attestation aggregation, it no longer makes sense to enqueue attestations between the signature check and adding them to the attestation pool - this only takes up valuable CPU without any real benefit. * add successfully validated attestations to attestion pool directly * avoid copying participant list around for single-vote attestations, pass single validator index instead * release decompressed gossip memory earlier, specially during async message validation * use cooked signatures in a few more places to avoid reloads and errors * remove some Defect-raising versions of signature-loading * release decompressed data memory before validating message
2021-04-26 20:39:44 +00:00
pool[].nextAttestationEpoch.setLen(0) # reset for test
check:
# Too far in the future
validateAttestation(
Perform attestation check before broadcast (#2550) Currently, we have a bit of a convoluted flow where when sending attestations, we start broadcasting them over gossip then pass them to the attestation validation to include them in the local attestation pool - it should be the other way around: we should be checking attestations _before_ gossipping them - this serves as an additional safety net to ensure that we don't publish junk - this becomes more important when publishing attestations from the API. Also, the REST API was performing its own validation meaning attestations coming from REST would be validated twice - finally, the JSON RPC wasn't pre-validating and would happily broadcast invalid attestations. * Unified attestation production pipeline with the same flow for gossip, locally and API-produced attestations: all are now validated and entered into the pool, then broadcast/republished * Refactor subnet handling with specific SubnetId alias, streamlining where subnets are computed, avoiding the need to pass around the number of active validators * Move some of the subnet handling code to eth2_network * Use BitArray throughout for subnet handling
2021-05-10 07:13:36 +00:00
pool, batchCrypto, att_1_0, beaconTime - 1.seconds, subnet, true).waitFor().isErr
remove attestation/aggregate queue (#2519) With the introduction of batching and lazy attestation aggregation, it no longer makes sense to enqueue attestations between the signature check and adding them to the attestation pool - this only takes up valuable CPU without any real benefit. * add successfully validated attestations to attestion pool directly * avoid copying participant list around for single-vote attestations, pass single validator index instead * release decompressed gossip memory earlier, specially during async message validation * use cooked signatures in a few more places to avoid reloads and errors * remove some Defect-raising versions of signature-loading * release decompressed data memory before validating message
2021-04-26 20:39:44 +00:00
pool[].nextAttestationEpoch.setLen(0) # reset for test
check:
# Too far in the past
validateAttestation(
pool, batchCrypto, att_1_0,
beaconTime - (SECONDS_PER_SLOT * SLOTS_PER_EPOCH - 1).int.seconds,
Perform attestation check before broadcast (#2550) Currently, we have a bit of a convoluted flow where when sending attestations, we start broadcasting them over gossip then pass them to the attestation validation to include them in the local attestation pool - it should be the other way around: we should be checking attestations _before_ gossipping them - this serves as an additional safety net to ensure that we don't publish junk - this becomes more important when publishing attestations from the API. Also, the REST API was performing its own validation meaning attestations coming from REST would be validated twice - finally, the JSON RPC wasn't pre-validating and would happily broadcast invalid attestations. * Unified attestation production pipeline with the same flow for gossip, locally and API-produced attestations: all are now validated and entered into the pool, then broadcast/republished * Refactor subnet handling with specific SubnetId alias, streamlining where subnets are computed, avoiding the need to pass around the number of active validators * Move some of the subnet handling code to eth2_network * Use BitArray throughout for subnet handling
2021-05-10 07:13:36 +00:00
subnet, true).waitFor().isErr
remove attestation/aggregate queue (#2519) With the introduction of batching and lazy attestation aggregation, it no longer makes sense to enqueue attestations between the signature check and adding them to the attestation pool - this only takes up valuable CPU without any real benefit. * add successfully validated attestations to attestion pool directly * avoid copying participant list around for single-vote attestations, pass single validator index instead * release decompressed gossip memory earlier, specially during async message validation * use cooked signatures in a few more places to avoid reloads and errors * remove some Defect-raising versions of signature-loading * release decompressed data memory before validating message
2021-04-26 20:39:44 +00:00
block:
var broken = att_1_0
broken.signature.blob[0] += 1
pool[].nextAttestationEpoch.setLen(0) # reset for test
check:
# Invalid signature
validateAttestation(
pool, batchCrypto, broken, beaconTime, subnet, true).waitFor().
error()[0] == ValidationResult.Reject
block:
var broken = att_1_0
broken.signature.blob[5] += 1
pool[].nextAttestationEpoch.setLen(0) # reset for test
# One invalid, one valid (batched)
let
fut_1_0 = validateAttestation(
pool, batchCrypto, broken, beaconTime, subnet, true)
fut_1_1 = validateAttestation(
pool, batchCrypto, att_1_1, beaconTime, subnet, true)
check:
fut_1_0.waitFor().error()[0] == ValidationResult.Reject
fut_1_1.waitFor().isOk()
block:
var broken = att_1_0
# This shouldn't deserialize, which is a different way to break it
broken.signature.blob = default(type broken.signature.blob)
pool[].nextAttestationEpoch.setLen(0) # reset for test
# One invalid, one valid (batched)
let
fut_1_0 = validateAttestation(
pool, batchCrypto, broken, beaconTime, subnet, true)
fut_1_1 = validateAttestation(
pool, batchCrypto, att_1_1, beaconTime, subnet, true)
check:
fut_1_0.waitFor().error()[0] == ValidationResult.Reject
fut_1_1.waitFor().isOk()
handle duplicate pubkeys in sync committee (#2902) When sync committee message handling was introduced in #2830, the edge case of the same validator being selected multiple times as part of a sync subcommittee was not covered. Not handling that edge case makes sync contributions have a lower-than-expected participation rate as each sync validator is only counted up through once per subcommittee. This patch ensures that this edge case is properly covered.
2021-09-28 07:44:20 +00:00
suite "Gossip validation - Extra": # Not based on preset config
test "validateSyncCommitteeMessage":
const num_validators = SLOTS_PER_EPOCH
harden sync sub committee selection (#2965) * harden sync sub committee selection also turn it into an iterator * fix test and warning
2021-10-07 13:19:47 +00:00
let
handle duplicate pubkeys in sync committee (#2902) When sync committee message handling was introduced in #2830, the edge case of the same validator being selected multiple times as part of a sync subcommittee was not covered. Not handling that edge case makes sync contributions have a lower-than-expected participation rate as each sync validator is only counted up through once per subcommittee. This patch ensures that this edge case is properly covered.
2021-09-28 07:44:20 +00:00
cfg = block:
var cfg = defaultRuntimeConfig
cfg.ALTAIR_FORK_EPOCH = (GENESIS_EPOCH + 1).Epoch
cfg
batch-verify sync messages for a small perf boost (#3151) * batch-verify sync messages for a small perf boost Generally reuses the same structure as attestation and aggregate verification * normalize `signatures` and `signature_batch` to use the same pattern of verification * normalize parameter names, order etc for signature stuff in general * avoid calling `blsSign` directly - instead, go through `signatures` consistently
2021-12-09 12:56:54 +00:00
taskpool = Taskpool.new()
quarantine = newClone(Quarantine.init())
batchCrypto = BatchCrypto.new(keys.newRng(), eager = proc(): bool = false, taskpool)
var
verifier = BatchVerifier(rng: keys.newRng(), taskpool: Taskpool.new())
handle duplicate pubkeys in sync committee (#2902) When sync committee message handling was introduced in #2830, the edge case of the same validator being selected multiple times as part of a sync subcommittee was not covered. Not handling that edge case makes sync contributions have a lower-than-expected participation rate as each sync validator is only counted up through once per subcommittee. This patch ensures that this edge case is properly covered.
2021-09-28 07:44:20 +00:00
dag = block:
batch-verify sync messages for a small perf boost (#3151) * batch-verify sync messages for a small perf boost Generally reuses the same structure as attestation and aggregate verification * normalize `signatures` and `signature_batch` to use the same pattern of verification * normalize parameter names, order etc for signature stuff in general * avoid calling `blsSign` directly - instead, go through `signatures` consistently
2021-12-09 12:56:54 +00:00
let
Validator monitoring (#2925) Validator monitoring based on and mostly compatible with the implementation in Lighthouse - tracks additional logs and metrics for specified validators so as to stay on top on performance. The implementation works more or less the following way: * Validator pubkeys are singled out for monitoring - these can be running on the node or not * For every action that the validator takes, we record steps in the process such as messages being seen on the network or published in the API * When the dust settles at the end of an epoch, we report the information from one epoch before that, which coincides with the balances being updated - this is a tradeoff between being correct (waiting for finalization) and providing relevant information in a timely manner)
2021-12-20 19:20:31 +00:00
validatorMonitor = newClone(ValidatorMonitor.init())
dag = ChainDAGRef.init(
cfg, makeTestDB(num_validators), validatorMonitor, {})
handle duplicate pubkeys in sync committee (#2902) When sync committee message handling was introduced in #2830, the edge case of the same validator being selected multiple times as part of a sync subcommittee was not covered. Not handling that edge case makes sync contributions have a lower-than-expected participation rate as each sync validator is only counted up through once per subcommittee. This patch ensures that this edge case is properly covered.
2021-09-28 07:44:20 +00:00
var cache = StateCache()
for blck in makeTestBlocks(
ncli_db: add putState, putBlock (#3096) * ncli_db: add putState, putBlock These tools allow modifying an existing nimbus database for the purpose of recovery or reorg, moving the head, tail and genesis to arbitrary points. * remove potentially expensive `putState` in `BeaconStateDB` * introduce `latest_block_root` which computes the root of the latest applied block from the `latest_block_header` field (instead of passing it in separately) * avoid some unnecessary BeaconState copies during init * discover https://github.com/nim-lang/Nim/issues/19094 * prefer `HashedBeaconState` in a few places to avoid recomputing state root * fetch latest block root from state when creating blocks * harden `get_beacon_proposer_index` against invalid slots and document * move random spec function tests to `test_spec.nim` * avoid unnecessary state root computation before block proposal
2021-11-18 12:02:43 +00:00
dag.headState.data, cache, int(SLOTS_PER_EPOCH), false, cfg = cfg):
harden sync sub committee selection (#2965) * harden sync sub committee selection also turn it into an iterator * fix test and warning
2021-10-07 13:19:47 +00:00
let added =
handle duplicate pubkeys in sync committee (#2902) When sync committee message handling was introduced in #2830, the edge case of the same validator being selected multiple times as part of a sync subcommittee was not covered. Not handling that edge case makes sync contributions have a lower-than-expected participation rate as each sync validator is only counted up through once per subcommittee. This patch ensures that this edge case is properly covered.
2021-09-28 07:44:20 +00:00
case blck.kind
of BeaconBlockFork.Phase0:
const nilCallback = OnPhase0BlockAdded(nil)
Backfill support for ChainDAG (#3171) In the ChainDAG, 3 block pointers are kept: genesis, tail and head. This PR adds one more block pointer: the backfill block which represents the block that has been backfilled so far. When doing a checkpoint sync, a random block is given as starting point - this is the tail block, and we require that the tail block has a corresponding state. When backfilling, we end up with blocks without corresponding states, hence we cannot use `tail` as a backfill pointer - there is no state. Nonetheless, we need to keep track of where we are in the backfill process between restarts, such that we can answer GetBeaconBlocksByRange requests. This PR adds the basic support for backfill handling - it needs to be integrated with backfill sync, and the REST API needs to be adjusted to take advantage of the new backfilled blocks when responding to certain requests. Future work will also enable moving the tail in either direction: * pruning means moving the tail forward in time and removing states * backwards means recreating past states from genesis, such that intermediate states are recreated step by step all the way to the tail - at that point, tail, genesis and backfill will match up. * backfilling is done when backfill != genesis - later, this will be the WSS checkpoint instead
2021-12-13 13:36:06 +00:00
dag.addHeadBlock(verifier, blck.phase0Data, nilCallback)
handle duplicate pubkeys in sync committee (#2902) When sync committee message handling was introduced in #2830, the edge case of the same validator being selected multiple times as part of a sync subcommittee was not covered. Not handling that edge case makes sync contributions have a lower-than-expected participation rate as each sync validator is only counted up through once per subcommittee. This patch ensures that this edge case is properly covered.
2021-09-28 07:44:20 +00:00
of BeaconBlockFork.Altair:
const nilCallback = OnAltairBlockAdded(nil)
Backfill support for ChainDAG (#3171) In the ChainDAG, 3 block pointers are kept: genesis, tail and head. This PR adds one more block pointer: the backfill block which represents the block that has been backfilled so far. When doing a checkpoint sync, a random block is given as starting point - this is the tail block, and we require that the tail block has a corresponding state. When backfilling, we end up with blocks without corresponding states, hence we cannot use `tail` as a backfill pointer - there is no state. Nonetheless, we need to keep track of where we are in the backfill process between restarts, such that we can answer GetBeaconBlocksByRange requests. This PR adds the basic support for backfill handling - it needs to be integrated with backfill sync, and the REST API needs to be adjusted to take advantage of the new backfilled blocks when responding to certain requests. Future work will also enable moving the tail in either direction: * pruning means moving the tail forward in time and removing states * backwards means recreating past states from genesis, such that intermediate states are recreated step by step all the way to the tail - at that point, tail, genesis and backfill will match up. * backfilling is done when backfill != genesis - later, this will be the WSS checkpoint instead
2021-12-13 13:36:06 +00:00
dag.addHeadBlock(verifier, blck.altairData, nilCallback)
handle duplicate pubkeys in sync committee (#2902) When sync committee message handling was introduced in #2830, the edge case of the same validator being selected multiple times as part of a sync subcommittee was not covered. Not handling that edge case makes sync contributions have a lower-than-expected participation rate as each sync validator is only counted up through once per subcommittee. This patch ensures that this edge case is properly covered.
2021-09-28 07:44:20 +00:00
of BeaconBlockFork.Merge:
const nilCallback = OnMergeBlockAdded(nil)
Backfill support for ChainDAG (#3171) In the ChainDAG, 3 block pointers are kept: genesis, tail and head. This PR adds one more block pointer: the backfill block which represents the block that has been backfilled so far. When doing a checkpoint sync, a random block is given as starting point - this is the tail block, and we require that the tail block has a corresponding state. When backfilling, we end up with blocks without corresponding states, hence we cannot use `tail` as a backfill pointer - there is no state. Nonetheless, we need to keep track of where we are in the backfill process between restarts, such that we can answer GetBeaconBlocksByRange requests. This PR adds the basic support for backfill handling - it needs to be integrated with backfill sync, and the REST API needs to be adjusted to take advantage of the new backfilled blocks when responding to certain requests. Future work will also enable moving the tail in either direction: * pruning means moving the tail forward in time and removing states * backwards means recreating past states from genesis, such that intermediate states are recreated step by step all the way to the tail - at that point, tail, genesis and backfill will match up. * backfilling is done when backfill != genesis - later, this will be the WSS checkpoint instead
2021-12-13 13:36:06 +00:00
dag.addHeadBlock(verifier, blck.mergeData, nilCallback)
handle duplicate pubkeys in sync committee (#2902) When sync committee message handling was introduced in #2830, the edge case of the same validator being selected multiple times as part of a sync subcommittee was not covered. Not handling that edge case makes sync contributions have a lower-than-expected participation rate as each sync validator is only counted up through once per subcommittee. This patch ensures that this edge case is properly covered.
2021-09-28 07:44:20 +00:00
check: added.isOk()
move quarantine outside of chaindag (#3124) * move quarantine outside of chaindag The quarantine has been part of the ChainDAG for the longest time, but this design has a few issues: * the function in which blocks are verified and added to the dag becomes reentrant and therefore difficult to reason about - we're currently using a stateful flag to work around it * quarantined blocks bypass the processing queue leading to a processing stampede * the quarantine flow is unsuitable for orphaned attestations - these should also should be quarantined eventually Instead of processing the quarantine inside ChainDAG, this PR moves re-queueing to `block_processor` which already is responsible for dealing with follow-up work when a block is added to the dag This sets the stage for keeping attestations in the quarantine as well. Also: * make `BlockError` `{.pure.}` * avoid use of `ValidationResult` in block clearance (that's for gossip)
2021-12-06 09:49:01 +00:00
dag.updateHead(added[], quarantine[])
handle duplicate pubkeys in sync committee (#2902) When sync committee message handling was introduced in #2830, the edge case of the same validator being selected multiple times as part of a sync subcommittee was not covered. Not handling that edge case makes sync contributions have a lower-than-expected participation rate as each sync validator is only counted up through once per subcommittee. This patch ensures that this edge case is properly covered.
2021-09-28 07:44:20 +00:00
dag
altair fork handling cleanups (#3050) * fix stack overflow crash in REST/debug/getStateV2 * introduce `ForkyXxx` for generic type matching of `Xxx` across branches (SomeHashedBeaconState -> ForkyHashedBeaconState et al) - `Some` is already used for other types of type classes * consolidate function naming in BeaconChainDB, use some generics * import `forks.nim` from other spec modules and move `Forked*` helpers around to resolve circular imports * remove `ForkedBeaconState`, use `ForkedHashedBeaconState` throughout (less data shuffling between the types) * fix several cases of states being stored on stack in tests, causing random failures on some platforms * remove reading json support from ncli - this should be ported to the rest json reading instead (doesn't currently work because stack sizes)
2021-11-05 07:34:34 +00:00
state = assignClone(dag.headState.data.altairData)
Bugfix: Avoid the aggregation of duplicate signatures when creating sync committee contributions
2021-11-04 18:22:24 +00:00
slot = state[].data.slot
handle duplicate pubkeys in sync committee (#2902) When sync committee message handling was introduced in #2830, the edge case of the same validator being selected multiple times as part of a sync subcommittee was not covered. Not handling that edge case makes sync contributions have a lower-than-expected participation rate as each sync validator is only counted up through once per subcommittee. This patch ensures that this edge case is properly covered.
2021-09-28 07:44:20 +00:00
Better REST/RPC error messages (#3046) * Better REST/RPC error messages * homogenise block logging (root first) * homegenise message verification pipeline (verify in `gossip_verification`, act in `eth2_processor`) * use `subcommitteeIdx` consistently * log each sent contribution * fix block_sim * fix block topic * don't recalc root on gossip block validation * move position loop into sync pool
2021-11-05 15:39:47 +00:00
subcommitteeIdx = 0.SyncSubcommitteeIndex
Bugfix: Avoid the aggregation of duplicate signatures when creating sync committee contributions
2021-11-04 18:22:24 +00:00
syncCommittee = @(dag.syncCommitteeParticipants(slot))
Better REST/RPC error messages (#3046) * Better REST/RPC error messages * homogenise block logging (root first) * homegenise message verification pipeline (verify in `gossip_verification`, act in `eth2_processor`) * use `subcommitteeIdx` consistently * log each sent contribution * fix block_sim * fix block topic * don't recalc root on gossip block validation * move position loop into sync pool
2021-11-05 15:39:47 +00:00
subcommittee = toSeq(syncCommittee.syncSubcommittee(subcommitteeIdx))
Speed up altair block processing 2x (#3115) * Speed up altair block processing >2x Like #3089, this PR drastially speeds up historical REST queries and other long state replays. * cache sync committee validator indices * use ~80mb less memory for validator pubkey mappings * batch-verify sync aggregate signature (fixes #2985) * document sync committee hack with head block vs sync message block * add batch signature verification failure tests Before: ``` ../env.sh nim c -d:release -r ncli_db --db:mainnet_0/db bench --start-slot:-1000 All time are ms Average, StdDev, Min, Max, Samples, Test Validation is turned off meaning that no BLS operations are performed 5830.675, 0.000, 5830.675, 5830.675, 1, Initialize DB 0.481, 1.878, 0.215, 59.167, 981, Load block from database 8422.566, 0.000, 8422.566, 8422.566, 1, Load state from database 6.996, 1.678, 0.042, 14.385, 969, Advance slot, non-epoch 93.217, 8.318, 84.192, 122.209, 32, Advance slot, epoch 20.513, 23.665, 11.510, 201.561, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` After: ``` 7081.422, 0.000, 7081.422, 7081.422, 1, Initialize DB 0.553, 2.122, 0.175, 66.692, 981, Load block from database 5439.446, 0.000, 5439.446, 5439.446, 1, Load state from database 6.829, 1.575, 0.043, 12.156, 969, Advance slot, non-epoch 94.716, 2.749, 88.395, 100.026, 32, Advance slot, epoch 11.636, 23.766, 4.889, 205.250, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` * add comment
2021-11-24 12:43:50 +00:00
index = subcommittee[0]
expectedCount = subcommittee.count(index)
pubkey = state[].data.validators[index].pubkey
Implementation of the Keymanager API (BETA) https://github.com/ethereum/keymanager-APIs
2021-12-22 12:37:31 +00:00
keystoreData = KeystoreData(kind: KeystoreKind.Local,
privateKey: MockPrivKeys[index])
validator = AttachedValidator(pubkey: pubkey,
kind: ValidatorKind.Local, data: keystoreData, index: some(index))
Remote signing client/server. (#3077)
2021-11-30 01:20:21 +00:00
resMsg = waitFor signSyncCommitteeMessage(
batch-verify sync messages for a small perf boost (#3151) * batch-verify sync messages for a small perf boost Generally reuses the same structure as attestation and aggregate verification * normalize `signatures` and `signature_batch` to use the same pattern of verification * normalize parameter names, order etc for signature stuff in general * avoid calling `blsSign` directly - instead, go through `signatures` consistently
2021-12-09 12:56:54 +00:00
validator, state[].data.fork, state[].data.genesis_validators_root, slot,
state[].root)
Remote signing client/server. (#3077)
2021-11-30 01:20:21 +00:00
msg = resMsg.get()
handle duplicate pubkeys in sync committee (#2902) When sync committee message handling was introduced in #2830, the edge case of the same validator being selected multiple times as part of a sync subcommittee was not covered. Not handling that edge case makes sync contributions have a lower-than-expected participation rate as each sync validator is only counted up through once per subcommittee. This patch ensures that this edge case is properly covered.
2021-09-28 07:44:20 +00:00
syncCommitteeMsgPool = newClone(SyncCommitteeMsgPool.init())
batch-verify sync messages for a small perf boost (#3151) * batch-verify sync messages for a small perf boost Generally reuses the same structure as attestation and aggregate verification * normalize `signatures` and `signature_batch` to use the same pattern of verification * normalize parameter names, order etc for signature stuff in general * avoid calling `blsSign` directly - instead, go through `signatures` consistently
2021-12-09 12:56:54 +00:00
res = waitFor validateSyncCommitteeMessage(
avoid SyncCommitteMsgPool copy (#3185) introduced by batch verification, when verifiers were made async
2021-12-11 15:39:24 +00:00
dag, batchCrypto, syncCommitteeMsgPool, msg, subcommitteeIdx,
Bugfix: Avoid the aggregation of duplicate signatures when creating sync committee contributions
2021-11-04 18:22:24 +00:00
slot.toBeaconTime(), true)
Better REST/RPC error messages (#3046) * Better REST/RPC error messages * homogenise block logging (root first) * homegenise message verification pipeline (verify in `gossip_verification`, act in `eth2_processor`) * use `subcommitteeIdx` consistently * log each sent contribution * fix block_sim * fix block topic * don't recalc root on gossip block validation * move position loop into sync pool
2021-11-05 15:39:47 +00:00
(positions, cookedSig) = res.get()
Cleanups (#3123) Renames and cleanups split out from the validator monitoring branch, so as to reduce conflict area vs other PR:s * add constants for expected message timing * name validators after the messages they validate, mostly, to make grepping easier * unify field naming of EpochInfo across forks to make cross-fork code easier
2021-11-25 12:20:36 +00:00
syncCommitteeMsgPool[].addSyncCommitteeMessage(
Better REST/RPC error messages (#3046) * Better REST/RPC error messages * homogenise block logging (root first) * homegenise message verification pipeline (verify in `gossip_verification`, act in `eth2_processor`) * use `subcommitteeIdx` consistently * log each sent contribution * fix block_sim * fix block topic * don't recalc root on gossip block validation * move position loop into sync pool
2021-11-05 15:39:47 +00:00
msg.slot,
msg.beacon_block_root,
msg.validator_index,
cookedSig,
subcommitteeIdx,
positions)
let
handle duplicate pubkeys in sync committee (#2902) When sync committee message handling was introduced in #2830, the edge case of the same validator being selected multiple times as part of a sync subcommittee was not covered. Not handling that edge case makes sync contributions have a lower-than-expected participation rate as each sync validator is only counted up through once per subcommittee. This patch ensures that this edge case is properly covered.
2021-09-28 07:44:20 +00:00
contribution = block:
Better REST/RPC error messages (#3046) * Better REST/RPC error messages * homogenise block logging (root first) * homegenise message verification pipeline (verify in `gossip_verification`, act in `eth2_processor`) * use `subcommitteeIdx` consistently * log each sent contribution * fix block_sim * fix block topic * don't recalc root on gossip block validation * move position loop into sync pool
2021-11-05 15:39:47 +00:00
var contribution = (ref SignedContributionAndProof)()
handle duplicate pubkeys in sync committee (#2902) When sync committee message handling was introduced in #2830, the edge case of the same validator being selected multiple times as part of a sync subcommittee was not covered. Not handling that edge case makes sync contributions have a lower-than-expected participation rate as each sync validator is only counted up through once per subcommittee. This patch ensures that this edge case is properly covered.
2021-09-28 07:44:20 +00:00
check: syncCommitteeMsgPool[].produceContribution(
Bugfix: Avoid the aggregation of duplicate signatures when creating sync committee contributions
2021-11-04 18:22:24 +00:00
slot, state[].root, subcommitteeIdx,
Better REST/RPC error messages (#3046) * Better REST/RPC error messages * homogenise block logging (root first) * homegenise message verification pipeline (verify in `gossip_verification`, act in `eth2_processor`) * use `subcommitteeIdx` consistently * log each sent contribution * fix block_sim * fix block topic * don't recalc root on gossip block validation * move position loop into sync pool
2021-11-05 15:39:47 +00:00
contribution.message.contribution)
Cleanups (#3123) Renames and cleanups split out from the validator monitoring branch, so as to reduce conflict area vs other PR:s * add constants for expected message timing * name validators after the messages they validate, mostly, to make grepping easier * unify field naming of EpochInfo across forks to make cross-fork code easier
2021-11-25 12:20:36 +00:00
syncCommitteeMsgPool[].addContribution(
Better REST/RPC error messages (#3046) * Better REST/RPC error messages * homogenise block logging (root first) * homegenise message verification pipeline (verify in `gossip_verification`, act in `eth2_processor`) * use `subcommitteeIdx` consistently * log each sent contribution * fix block_sim * fix block topic * don't recalc root on gossip block validation * move position loop into sync pool
2021-11-05 15:39:47 +00:00
contribution[], contribution.message.contribution.signature.load.get)
Remote signing client/server. (#3077)
2021-11-30 01:20:21 +00:00
let signRes = waitFor validator.sign(
Better REST/RPC error messages (#3046) * Better REST/RPC error messages * homogenise block logging (root first) * homegenise message verification pipeline (verify in `gossip_verification`, act in `eth2_processor`) * use `subcommitteeIdx` consistently * log each sent contribution * fix block_sim * fix block topic * don't recalc root on gossip block validation * move position loop into sync pool
2021-11-05 15:39:47 +00:00
contribution, state[].data.fork, state[].data.genesis_validators_root)
Remote signing client/server. (#3077)
2021-11-30 01:20:21 +00:00
doAssert(signRes.isOk())
handle duplicate pubkeys in sync committee (#2902) When sync committee message handling was introduced in #2830, the edge case of the same validator being selected multiple times as part of a sync subcommittee was not covered. Not handling that edge case makes sync contributions have a lower-than-expected participation rate as each sync validator is only counted up through once per subcommittee. This patch ensures that this edge case is properly covered.
2021-09-28 07:44:20 +00:00
contribution
aggregate = syncCommitteeMsgPool[].produceSyncAggregate(state[].root)
check:
expectedCount > 1 # Cover edge case
res.isOk
Better REST/RPC error messages (#3046) * Better REST/RPC error messages * homogenise block logging (root first) * homegenise message verification pipeline (verify in `gossip_verification`, act in `eth2_processor`) * use `subcommitteeIdx` consistently * log each sent contribution * fix block_sim * fix block topic * don't recalc root on gossip block validation * move position loop into sync pool
2021-11-05 15:39:47 +00:00
contribution.message.contribution.aggregation_bits.countOnes == expectedCount
handle duplicate pubkeys in sync committee (#2902) When sync committee message handling was introduced in #2830, the edge case of the same validator being selected multiple times as part of a sync subcommittee was not covered. Not handling that edge case makes sync contributions have a lower-than-expected participation rate as each sync validator is only counted up through once per subcommittee. This patch ensures that this edge case is properly covered.
2021-09-28 07:44:20 +00:00
aggregate.sync_committee_bits.countOnes == expectedCount
Better REST/RPC error messages (#3046) * Better REST/RPC error messages * homogenise block logging (root first) * homegenise message verification pipeline (verify in `gossip_verification`, act in `eth2_processor`) * use `subcommitteeIdx` consistently * log each sent contribution * fix block_sim * fix block topic * don't recalc root on gossip block validation * move position loop into sync pool
2021-11-05 15:39:47 +00:00
# Same message twice should be ignored
validateSyncCommitteeMessage(
avoid SyncCommitteMsgPool copy (#3185) introduced by batch verification, when verifiers were made async
2021-12-11 15:39:24 +00:00
dag, batchCrypto, syncCommitteeMsgPool, msg, subcommitteeIdx,
batch-verify sync messages for a small perf boost (#3151) * batch-verify sync messages for a small perf boost Generally reuses the same structure as attestation and aggregate verification * normalize `signatures` and `signature_batch` to use the same pattern of verification * normalize parameter names, order etc for signature stuff in general * avoid calling `blsSign` directly - instead, go through `signatures` consistently
2021-12-09 12:56:54 +00:00
state[].data.slot.toBeaconTime(), true).waitFor().isErr()