2019-06-28 13:44:44 +00:00
# beacon_chain
2024-01-06 14:26:56 +00:00
# Copyright (c) 2018-2024 Status Research & Development GmbH
2019-06-28 13:44:44 +00:00
# Licensed and distributed under either of
2019-11-25 15:30:02 +00:00
# * MIT license (license terms in the root directory or at https://opensource.org/licenses/MIT).
# * Apache v2 license (license terms in the root directory or at https://www.apache.org/licenses/LICENSE-2.0).
2019-06-28 13:44:44 +00:00
# at your option. This file may not be copied, modified, or distributed except according to those terms.
2024-02-18 01:16:49 +00:00
{. push raises : [ ] . }
2019-06-28 13:44:44 +00:00
# State transition - block processing, as described in
2024-02-22 02:42:57 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.4.0-beta.7/specs/phase0/beacon-chain.md#block-processing
2024-03-14 06:26:36 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.4.0/specs/altair/beacon-chain.md#block-processing
2024-05-09 05:03:10 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.5.0-alpha.2/specs/bellatrix/beacon-chain.md#block-processing
# https://github.com/ethereum/consensus-specs/blob/v1.5.0-alpha.2/specs/capella/beacon-chain.md#block-processing
2024-03-14 06:26:36 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.4.0/specs/deneb/beacon-chain.md#block-processing
2024-04-28 09:15:03 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.5.0-alpha.1/specs/electra/beacon-chain.md#block-processing
2019-06-28 13:44:44 +00:00
#
# The entry point is `process_block` which is at the bottom of this file.
#
2020-11-04 21:52:47 +00:00
# General notes about the code:
2019-06-28 13:44:44 +00:00
# * Weird styling - the sections taken from the spec use python styling while
# the others use NEP-1 - helps grepping identifiers in spec
2020-11-04 21:52:47 +00:00
# * When updating the code, add TODO sections to mark where there are clear
# improvements to be made - other than that, keep things similar to spec unless
# motivated by security or performance considerations
2019-06-28 13:44:44 +00:00
2019-12-04 10:49:59 +00:00
import
2021-08-18 18:57:58 +00:00
chronicles , metrics ,
.. / extras ,
2023-03-23 09:47:04 +00:00
. / datatypes / [ phase0 , altair , bellatrix , deneb ] ,
" . " / [ beaconstate , eth2_merkleization , helpers , validator , signatures ] ,
kzg4844 / kzg_abi , kzg4844 / kzg_ex
2019-06-28 13:44:44 +00:00
2022-12-08 16:21:53 +00:00
from std / algorithm import fill , sorted
from std / sequtils import count , filterIt , mapIt
2022-10-27 06:29:24 +00:00
from . / datatypes / capella import
2022-11-21 07:44:49 +00:00
BeaconState , MAX_WITHDRAWALS_PER_PAYLOAD , SignedBLSToExecutionChange ,
Withdrawal
2024-04-25 08:41:17 +00:00
from . / datatypes / electra import PendingPartialWithdrawal
2022-10-27 06:29:24 +00:00
2021-08-12 13:08:20 +00:00
export extras , phase0 , altair
2024-01-20 11:19:47 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.4.0-beta.6/specs/phase0/beacon-chain.md#block-header
2020-07-03 17:03:14 +00:00
func process_block_header * (
2023-05-09 18:16:49 +00:00
state : var ForkyBeaconState , blck : SomeForkyBeaconBlock ,
flags : UpdateFlags , cache : var StateCache ) : Result [ void , cstring ] =
2019-06-28 13:44:44 +00:00
# Verify that the slots match
if not ( blck . slot = = state . slot ) :
2020-07-03 17:03:14 +00:00
return err ( " process_block_header: slot mismatch " )
2019-06-28 13:44:44 +00:00
2020-05-19 14:37:29 +00:00
# Verify that the block is newer than latest block header
if not ( blck . slot > state . latest_block_header . slot ) :
2020-07-03 17:03:14 +00:00
return err ( " process_block_header: block not newer than latest block header " )
2020-05-19 14:37:29 +00:00
2020-03-14 21:54:45 +00:00
# Verify that proposer index is the correct index
2023-01-11 12:29:21 +00:00
let proposer_index = get_beacon_proposer_index ( state , cache ) . valueOr :
2020-07-03 17:03:14 +00:00
return err ( " process_block_header: proposer missing " )
2020-03-14 21:54:45 +00:00
2023-01-11 12:29:21 +00:00
if not ( blck . proposer_index = = proposer_index ) :
2020-07-03 17:03:14 +00:00
return err ( " process_block_header: proposer index incorrect " )
2020-03-14 21:54:45 +00:00
2019-06-28 13:44:44 +00:00
# Verify that the parent matches
2020-06-18 05:56:47 +00:00
if not ( blck . parent_root = = hash_tree_root ( state . latest_block_header ) ) :
2020-07-03 17:03:14 +00:00
return err ( " process_block_header: previous block root mismatch " )
2019-06-28 13:44:44 +00:00
2020-09-01 07:49:55 +00:00
# Verify proposer is not slashed
2022-05-30 13:30:42 +00:00
if state . validators . item ( blck . proposer_index ) . slashed :
2020-09-01 07:49:55 +00:00
return err ( " process_block_header: proposer slashed " )
2020-03-14 21:54:45 +00:00
# Cache current block as the new latest block
2019-06-28 13:44:44 +00:00
state . latest_block_header = BeaconBlockHeader (
slot : blck . slot ,
2020-03-14 21:54:45 +00:00
proposer_index : blck . proposer_index ,
2019-06-28 13:44:44 +00:00
parent_root : blck . parent_root ,
2019-07-15 12:57:18 +00:00
# state_root: zeroed, overwritten in the next `process_slot` call
2019-06-28 13:44:44 +00:00
body_root : hash_tree_root ( blck . body ) ,
)
2020-07-03 17:03:14 +00:00
ok ( )
2019-06-28 13:44:44 +00:00
2020-07-03 17:03:14 +00:00
func ` xor ` [ T : array ] ( a , b : T ) : T =
2020-05-28 16:34:59 +00:00
for i in 0 .. < result . len :
result [ i ] = a [ i ] xor b [ i ]
2024-01-20 11:19:47 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.4.0-beta.6/specs/phase0/beacon-chain.md#randao
2019-09-04 13:57:18 +00:00
proc process_randao (
2023-05-09 18:16:49 +00:00
state : var ForkyBeaconState , body : SomeForkyBeaconBlockBody ,
flags : UpdateFlags , cache : var StateCache ) : Result [ void , cstring ] =
2019-06-28 13:44:44 +00:00
let
2023-01-11 12:29:21 +00:00
proposer_index = get_beacon_proposer_index ( state , cache ) . valueOr :
return err ( " process_randao: proposer index missing, probably along with any active validators " )
2019-12-04 10:49:59 +00:00
2020-05-26 05:04:24 +00:00
# Verify RANDAO reveal
2022-09-28 01:15:10 +00:00
let epoch = state . get_current_epoch ( )
2019-06-28 13:44:44 +00:00
2022-12-19 13:11:12 +00:00
if skipBlsValidation notin flags and body . randao_reveal isnot TrustedSig :
2023-01-11 12:29:21 +00:00
let proposer_pubkey = state . validators . item ( proposer_index ) . pubkey
2020-06-16 05:45:04 +00:00
2022-09-28 01:15:10 +00:00
# `state_transition.makeBeaconBlock` ensures this is run with a trusted
# signature, but unless the full skipBlsValidation is specified, RANDAO
# epoch signatures still have to be verified.
2020-06-16 05:45:04 +00:00
if not verify_epoch_signature (
state . fork , state . genesis_validators_root , epoch , proposer_pubkey ,
2022-12-19 13:11:12 +00:00
body . randao_reveal ) :
2021-04-08 10:11:04 +00:00
return err ( " process_randao: invalid epoch signature " )
2019-06-28 13:44:44 +00:00
2023-03-27 14:41:22 +00:00
# Mix in RANDAO reveal
2019-06-28 13:44:44 +00:00
let
2019-09-04 13:57:18 +00:00
mix = get_randao_mix ( state , epoch )
2020-06-16 12:16:43 +00:00
rr = eth2digest ( body . randao_reveal . toRaw ( ) ) . data
2019-06-28 13:44:44 +00:00
2022-05-30 13:30:42 +00:00
state . randao_mixes . mitem ( epoch mod EPOCHS_PER_HISTORICAL_VECTOR ) . data =
2020-05-28 16:34:59 +00:00
mix . data xor rr
2019-06-28 13:44:44 +00:00
2021-04-08 10:11:04 +00:00
ok ( )
2019-06-28 13:44:44 +00:00
2024-01-20 11:19:47 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.4.0-beta.6/specs/phase0/beacon-chain.md#eth1-data
2023-05-09 18:16:49 +00:00
func process_eth1_data (
state : var ForkyBeaconState ,
body : SomeForkyBeaconBlockBody ) : Result [ void , cstring ] =
2021-04-08 10:11:04 +00:00
if not state . eth1_data_votes . add body . eth1_data :
# Count is reset in process_final_updates, so this should never happen
return err ( " process_eth1_data: no more room for eth1 data " )
2020-05-28 16:34:59 +00:00
2020-07-26 18:55:48 +00:00
if state . eth1_data_votes . asSeq . count ( body . eth1_data ) . uint64 * 2 >
SLOTS_PER_ETH1_VOTING_PERIOD :
2019-07-01 09:42:37 +00:00
state . eth1_data = body . eth1_data
2021-04-08 10:11:04 +00:00
ok ( )
2019-06-28 13:44:44 +00:00
2024-01-20 11:19:47 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.4.0-beta.6/specs/phase0/beacon-chain.md#is_slashable_validator
2019-06-28 13:44:44 +00:00
func is_slashable_validator ( validator : Validator , epoch : Epoch ) : bool =
# Check if ``validator`` is slashable.
( not validator . slashed ) and
( validator . activation_epoch < = epoch ) and
( epoch < validator . withdrawable_epoch )
2024-01-20 11:19:47 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.4.0-beta.6/specs/phase0/beacon-chain.md#proposer-slashings
2020-09-24 17:05:49 +00:00
proc check_proposer_slashing * (
2021-12-29 02:50:49 +00:00
state : ForkyBeaconState , proposer_slashing : SomeProposerSlashing ,
2020-12-16 14:36:02 +00:00
flags : UpdateFlags ) :
2022-05-23 23:39:08 +00:00
Result [ ValidatorIndex , cstring ] =
2020-03-14 21:54:45 +00:00
let
header_1 = proposer_slashing . signed_header_1 . message
header_2 = proposer_slashing . signed_header_2 . message
# Verify header slots match
if not ( header_1 . slot = = header_2 . slot ) :
2020-09-24 17:05:49 +00:00
return err ( " check_proposer_slashing: slot mismatch " )
2019-09-10 15:29:46 +00:00
2020-03-14 21:54:45 +00:00
# Verify header proposer indices match
if not ( header_1 . proposer_index = = header_2 . proposer_index ) :
2020-09-24 17:05:49 +00:00
return err ( " check_proposer_slashing: proposer indices mismatch " )
2020-03-14 21:54:45 +00:00
# Verify the headers are different
if not ( header_1 ! = header_2 ) :
2020-09-24 17:05:49 +00:00
return err ( " check_proposer_slashing: headers not different " )
2019-09-10 15:29:46 +00:00
2020-03-14 21:54:45 +00:00
# Verify the proposer is slashable
2022-05-23 23:39:08 +00:00
if header_1 . proposer_index > = state . validators . lenu64 :
return err ( " check_proposer_slashing: invalid proposer index " )
2022-05-30 13:30:42 +00:00
let proposer = unsafeAddr state . validators [ header_1 . proposer_index ]
performance fixes (#2259)
* performance fixes
* don't mark tree cache as dirty on read-only List accesses
* store only blob in memory for keys and signatures, parse blob lazily
* compare public keys by blob instead of parsing / converting to raw
* compare Eth2Digest using non-constant-time comparison
* avoid some unnecessary validator copying
This branch will in particular speed up deposit processing which has
been slowing down block replay.
Pre (mainnet, 1600 blocks):
```
All time are ms
Average, StdDev, Min, Max, Samples, Test
Validation is turned off meaning that no BLS operations are performed
3450.269, 0.000, 3450.269, 3450.269, 1, Initialize DB
0.417, 0.822, 0.036, 21.098, 1400, Load block from database
16.521, 0.000, 16.521, 16.521, 1, Load state from database
27.906, 50.846, 8.104, 1507.633, 1350, Apply block
52.617, 37.029, 20.640, 135.938, 50, Apply epoch block
```
Post:
```
3502.715, 0.000, 3502.715, 3502.715, 1, Initialize DB
0.080, 0.560, 0.035, 21.015, 1400, Load block from database
17.595, 0.000, 17.595, 17.595, 1, Load state from database
15.706, 11.028, 8.300, 107.537, 1350, Apply block
33.217, 12.622, 17.331, 60.580, 50, Apply epoch block
```
* more perf fixes
* load EpochRef cache into StateCache more aggressively
* point out security concern with public key cache
* reuse proposer index from state when processing block
* avoid genericAssign in a few more places
* don't parse key when signature is unparseable
* fix `==` overload for Eth2Digest
* preallocate validator list when getting active validators
* speed up proposer index calculation a little bit
* reuse cache when replaying blocks in ncli_db
* avoid a few more copying loops
```
Average, StdDev, Min, Max, Samples, Test
Validation is turned off meaning that no BLS operations are performed
3279.158, 0.000, 3279.158, 3279.158, 1, Initialize DB
0.072, 0.357, 0.035, 13.400, 1400, Load block from database
17.295, 0.000, 17.295, 17.295, 1, Load state from database
5.918, 9.896, 0.198, 98.028, 1350, Apply block
15.888, 10.951, 7.902, 39.535, 50, Apply epoch block
0.000, 0.000, 0.000, 0.000, 0, Database block store
```
* clear full balance cache before processing rewards and penalties
```
All time are ms
Average, StdDev, Min, Max, Samples, Test
Validation is turned off meaning that no BLS operations are performed
3947.901, 0.000, 3947.901, 3947.901, 1, Initialize DB
0.124, 0.506, 0.026, 202.370, 363345, Load block from database
97.614, 0.000, 97.614, 97.614, 1, Load state from database
0.186, 0.188, 0.012, 99.561, 357262, Advance slot, non-epoch
14.161, 5.966, 1.099, 395.511, 11524, Advance slot, epoch
1.372, 4.170, 0.017, 276.401, 363345, Apply block, no slot processing
0.000, 0.000, 0.000, 0.000, 0, Database block store
```
2021-01-25 12:04:18 +00:00
if not is_slashable_validator ( proposer [ ] , get_current_epoch ( state ) ) :
2020-09-24 17:05:49 +00:00
return err ( " check_proposer_slashing: slashed proposer " )
2019-09-10 15:29:46 +00:00
2020-03-14 21:54:45 +00:00
# Verify signatures
2020-03-05 12:52:10 +00:00
if skipBlsValidation notin flags :
2020-09-24 17:05:49 +00:00
for signed_header in [ proposer_slashing . signed_header_1 ,
2019-12-16 18:08:50 +00:00
proposer_slashing . signed_header_2 ] :
2020-06-16 05:45:04 +00:00
if not verify_block_signature (
state . fork , state . genesis_validators_root , signed_header . message . slot ,
2021-06-01 11:13:40 +00:00
signed_header . message , proposer [ ] . pubkey ,
signed_header . signature ) :
2020-09-24 17:05:49 +00:00
return err ( " check_proposer_slashing: invalid signature " )
2019-09-10 15:29:46 +00:00
2022-05-23 23:39:08 +00:00
# Verified above against state.validators
ValidatorIndex . init ( header_1 . proposer_index )
2019-09-10 15:29:46 +00:00
2021-11-05 07:34:34 +00:00
proc check_proposer_slashing * (
2023-05-09 18:16:49 +00:00
state : var ForkedHashedBeaconState , proposer_slashing : SomeProposerSlashing ,
2022-05-23 23:39:08 +00:00
flags : UpdateFlags ) : Result [ ValidatorIndex , cstring ] =
2021-11-05 07:34:34 +00:00
withState ( state ) :
2022-08-31 00:29:03 +00:00
check_proposer_slashing ( forkyState . data , proposer_slashing , flags )
2021-11-05 07:34:34 +00:00
2024-01-20 11:19:47 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.4.0-beta.6/specs/phase0/beacon-chain.md#proposer-slashings
2020-09-24 17:05:49 +00:00
proc process_proposer_slashing * (
2021-11-05 07:34:34 +00:00
cfg : RuntimeConfig , state : var ForkyBeaconState ,
Implement split preset/config support (#2710)
* Implement split preset/config support
This is the initial bulk refactor to introduce runtime config values in
a number of places, somewhat replacing the existing mechanism of loading
network metadata.
It still needs more work, this is the initial refactor that introduces
runtime configuration in some of the places that need it.
The PR changes the way presets and constants work, to match the spec. In
particular, a "preset" now refers to the compile-time configuration
while a "cfg" or "RuntimeConfig" is the dynamic part.
A single binary can support either mainnet or minimal, but not both.
Support for other presets has been removed completely (can be readded,
in case there's need).
There's a number of outstanding tasks:
* `SECONDS_PER_SLOT` still needs fixing
* loading custom runtime configs needs redoing
* checking constants against YAML file
* yeerongpilly support
`build/nimbus_beacon_node --network=yeerongpilly --discv5:no --log-level=DEBUG`
* load fork epoch from config
* fix fork digest sent in status
* nicer error string for request failures
* fix tools
* one more
* fixup
* fixup
* fixup
* use "standard" network definition folder in local testnet
Files are loaded from their standard locations, including genesis etc,
to conform to the format used in the `eth2-networks` repo.
* fix launch scripts, allow unknown config values
* fix base config of rest test
* cleanups
* bundle mainnet config using common loader
* fix spec links and names
* only include supported preset in binary
* drop yeerongpilly, add altair-devnet-0, support boot_enr.yaml
2021-07-12 13:01:38 +00:00
proposer_slashing : SomeProposerSlashing , flags : UpdateFlags ,
2024-04-02 12:18:40 +00:00
exit_queue_info : ExitQueueInfo , cache : var StateCache ) :
Result [ ( Gwei , ExitQueueInfo ) , cstring ] =
2022-05-23 23:39:08 +00:00
let proposer_index = ? check_proposer_slashing ( state , proposer_slashing , flags )
2024-04-02 12:18:40 +00:00
slash_validator ( cfg , state , proposer_index , exit_queue_info , cache )
2019-09-10 15:29:46 +00:00
2024-01-20 11:19:47 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.4.0-beta.6/specs/phase0/beacon-chain.md#is_slashable_attestation_data
2021-06-03 09:42:25 +00:00
func is_slashable_attestation_data (
2019-06-28 13:44:44 +00:00
data_1 : AttestationData , data_2 : AttestationData ) : bool =
## Check if ``data_1`` and ``data_2`` are slashable according to Casper FFG
## rules.
# Double vote
2019-07-02 21:14:55 +00:00
( data_1 ! = data_2 and data_1 . target . epoch = = data_2 . target . epoch ) or
2019-06-28 13:44:44 +00:00
# Surround vote
2019-07-02 21:14:55 +00:00
( data_1 . source . epoch < data_2 . source . epoch and
data_2 . target . epoch < data_1 . target . epoch )
2019-06-28 13:44:44 +00:00
2024-01-20 11:19:47 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.4.0-beta.6/specs/phase0/beacon-chain.md#attester-slashings
2020-09-24 17:05:49 +00:00
proc check_attester_slashing * (
2024-04-25 08:41:17 +00:00
state : ForkyBeaconState ,
2024-04-29 02:19:10 +00:00
attester_slashing : SomeAttesterSlashing | electra . AttesterSlashing |
electra . TrustedAttesterSlashing ,
2024-04-25 08:41:17 +00:00
flags : UpdateFlags ) : Result [ seq [ ValidatorIndex ] , cstring ] =
2020-07-03 17:03:14 +00:00
let
attestation_1 = attester_slashing . attestation_1
attestation_2 = attester_slashing . attestation_2
2019-06-28 13:44:44 +00:00
2020-07-03 17:03:14 +00:00
if not is_slashable_attestation_data (
attestation_1 . data , attestation_2 . data ) :
return err ( " Attester slashing: surround or double vote check failed " )
2019-06-28 13:44:44 +00:00
2020-08-13 13:47:06 +00:00
if not is_valid_indexed_attestation ( state , attestation_1 , flags ) . isOk ( ) :
2020-07-03 17:03:14 +00:00
return err ( " Attester slashing: invalid attestation 1 " )
2019-06-28 13:44:44 +00:00
2020-08-13 13:47:06 +00:00
if not is_valid_indexed_attestation ( state , attestation_2 , flags ) . isOk ( ) :
2020-07-03 17:03:14 +00:00
return err ( " Attester slashing: invalid attestation 2 " )
2020-09-24 17:05:49 +00:00
var slashed_indices : seq [ ValidatorIndex ]
2020-07-03 17:03:14 +00:00
2021-10-20 11:36:38 +00:00
let attesting_indices_2 = toHashSet ( attestation_2 . attesting_indices . asSeq )
for index in sorted ( filterIt (
attestation_1 . attesting_indices . asSeq , it in attesting_indices_2 ) ,
system . cmp ) :
2020-07-03 17:03:14 +00:00
if is_slashable_validator (
2022-05-30 13:30:42 +00:00
state . validators [ index ] , get_current_epoch ( state ) ) :
2022-05-23 23:39:08 +00:00
slashed_indices . add ValidatorIndex . init ( index ) . expect (
" checked by is_valid_indexed_attestation " )
2020-09-24 17:05:49 +00:00
if slashed_indices . len = = 0 :
2020-07-03 17:03:14 +00:00
return err ( " Attester slashing: Trying to slash participant(s) twice " )
2020-09-24 17:05:49 +00:00
ok slashed_indices
2024-04-22 09:00:38 +00:00
proc check_attester_slashing * (
state : var ForkedHashedBeaconState ,
2024-04-29 02:19:10 +00:00
attester_slashing : SomeAttesterSlashing | electra . AttesterSlashing |
electra . TrustedAttesterSlashing ,
2024-04-22 09:00:38 +00:00
flags : UpdateFlags ) : Result [ seq [ ValidatorIndex ] , cstring ] =
withState ( state ) :
check_attester_slashing ( forkyState . data , attester_slashing , flags )
2024-01-20 11:19:47 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.4.0-beta.6/specs/phase0/beacon-chain.md#attester-slashings
2020-09-24 17:05:49 +00:00
proc process_attester_slashing * (
Implement split preset/config support (#2710)
* Implement split preset/config support
This is the initial bulk refactor to introduce runtime config values in
a number of places, somewhat replacing the existing mechanism of loading
network metadata.
It still needs more work, this is the initial refactor that introduces
runtime configuration in some of the places that need it.
The PR changes the way presets and constants work, to match the spec. In
particular, a "preset" now refers to the compile-time configuration
while a "cfg" or "RuntimeConfig" is the dynamic part.
A single binary can support either mainnet or minimal, but not both.
Support for other presets has been removed completely (can be readded,
in case there's need).
There's a number of outstanding tasks:
* `SECONDS_PER_SLOT` still needs fixing
* loading custom runtime configs needs redoing
* checking constants against YAML file
* yeerongpilly support
`build/nimbus_beacon_node --network=yeerongpilly --discv5:no --log-level=DEBUG`
* load fork epoch from config
* fix fork digest sent in status
* nicer error string for request failures
* fix tools
* one more
* fixup
* fixup
* fixup
* use "standard" network definition folder in local testnet
Files are loaded from their standard locations, including genesis etc,
to conform to the format used in the `eth2-networks` repo.
* fix launch scripts, allow unknown config values
* fix base config of rest test
* cleanups
* bundle mainnet config using common loader
* fix spec links and names
* only include supported preset in binary
* drop yeerongpilly, add altair-devnet-0, support boot_enr.yaml
2021-07-12 13:01:38 +00:00
cfg : RuntimeConfig ,
2021-11-05 07:34:34 +00:00
state : var ForkyBeaconState ,
2024-04-29 02:19:10 +00:00
attester_slashing : SomeAttesterSlashing | electra . AttesterSlashing |
electra . TrustedAttesterSlashing ,
Implement split preset/config support (#2710)
* Implement split preset/config support
This is the initial bulk refactor to introduce runtime config values in
a number of places, somewhat replacing the existing mechanism of loading
network metadata.
It still needs more work, this is the initial refactor that introduces
runtime configuration in some of the places that need it.
The PR changes the way presets and constants work, to match the spec. In
particular, a "preset" now refers to the compile-time configuration
while a "cfg" or "RuntimeConfig" is the dynamic part.
A single binary can support either mainnet or minimal, but not both.
Support for other presets has been removed completely (can be readded,
in case there's need).
There's a number of outstanding tasks:
* `SECONDS_PER_SLOT` still needs fixing
* loading custom runtime configs needs redoing
* checking constants against YAML file
* yeerongpilly support
`build/nimbus_beacon_node --network=yeerongpilly --discv5:no --log-level=DEBUG`
* load fork epoch from config
* fix fork digest sent in status
* nicer error string for request failures
* fix tools
* one more
* fixup
* fixup
* fixup
* use "standard" network definition folder in local testnet
Files are loaded from their standard locations, including genesis etc,
to conform to the format used in the `eth2-networks` repo.
* fix launch scripts, allow unknown config values
* fix base config of rest test
* cleanups
* bundle mainnet config using common loader
* fix spec links and names
* only include supported preset in binary
* drop yeerongpilly, add altair-devnet-0, support boot_enr.yaml
2021-07-12 13:01:38 +00:00
flags : UpdateFlags ,
2024-04-02 12:18:40 +00:00
exit_queue_info : ExitQueueInfo , cache : var StateCache
) : Result [ ( Gwei , ExitQueueInfo ) , cstring ] =
2022-05-23 23:39:08 +00:00
let slashed_attesters =
? check_attester_slashing ( state , attester_slashing , flags )
2020-09-24 17:05:49 +00:00
2024-04-02 12:18:40 +00:00
var
proposer_reward : Gwei
cur_exit_queue_info = exit_queue_info
2024-03-04 17:00:46 +00:00
2022-05-23 23:39:08 +00:00
for index in slashed_attesters :
2024-04-02 12:18:40 +00:00
doAssert strictVerification notin flags or
2024-04-03 01:45:57 +00:00
cur_exit_queue_info = = get_state_exit_queue_info ( state )
2024-04-02 12:18:40 +00:00
let ( new_proposer_reward , new_exit_queue_info ) = ? slash_validator (
cfg , state , index , cur_exit_queue_info , cache )
proposer_reward + = new_proposer_reward
cur_exit_queue_info = new_exit_queue_info
Implement split preset/config support (#2710)
* Implement split preset/config support
This is the initial bulk refactor to introduce runtime config values in
a number of places, somewhat replacing the existing mechanism of loading
network metadata.
It still needs more work, this is the initial refactor that introduces
runtime configuration in some of the places that need it.
The PR changes the way presets and constants work, to match the spec. In
particular, a "preset" now refers to the compile-time configuration
while a "cfg" or "RuntimeConfig" is the dynamic part.
A single binary can support either mainnet or minimal, but not both.
Support for other presets has been removed completely (can be readded,
in case there's need).
There's a number of outstanding tasks:
* `SECONDS_PER_SLOT` still needs fixing
* loading custom runtime configs needs redoing
* checking constants against YAML file
* yeerongpilly support
`build/nimbus_beacon_node --network=yeerongpilly --discv5:no --log-level=DEBUG`
* load fork epoch from config
* fix fork digest sent in status
* nicer error string for request failures
* fix tools
* one more
* fixup
* fixup
* fixup
* use "standard" network definition folder in local testnet
Files are loaded from their standard locations, including genesis etc,
to conform to the format used in the `eth2-networks` repo.
* fix launch scripts, allow unknown config values
* fix base config of rest test
* cleanups
* bundle mainnet config using common loader
* fix spec links and names
* only include supported preset in binary
* drop yeerongpilly, add altair-devnet-0, support boot_enr.yaml
2021-07-12 13:01:38 +00:00
2024-04-02 12:18:40 +00:00
ok ( ( proposer_reward , cur_exit_queue_info ) )
Implement split preset/config support (#2710)
* Implement split preset/config support
This is the initial bulk refactor to introduce runtime config values in
a number of places, somewhat replacing the existing mechanism of loading
network metadata.
It still needs more work, this is the initial refactor that introduces
runtime configuration in some of the places that need it.
The PR changes the way presets and constants work, to match the spec. In
particular, a "preset" now refers to the compile-time configuration
while a "cfg" or "RuntimeConfig" is the dynamic part.
A single binary can support either mainnet or minimal, but not both.
Support for other presets has been removed completely (can be readded,
in case there's need).
There's a number of outstanding tasks:
* `SECONDS_PER_SLOT` still needs fixing
* loading custom runtime configs needs redoing
* checking constants against YAML file
* yeerongpilly support
`build/nimbus_beacon_node --network=yeerongpilly --discv5:no --log-level=DEBUG`
* load fork epoch from config
* fix fork digest sent in status
* nicer error string for request failures
* fix tools
* one more
* fixup
* fixup
* fixup
* use "standard" network definition folder in local testnet
Files are loaded from their standard locations, including genesis etc,
to conform to the format used in the `eth2-networks` repo.
* fix launch scripts, allow unknown config values
* fix base config of rest test
* cleanups
* bundle mainnet config using common loader
* fix spec links and names
* only include supported preset in binary
* drop yeerongpilly, add altair-devnet-0, support boot_enr.yaml
2021-07-12 13:01:38 +00:00
2022-05-23 23:39:08 +00:00
func findValidatorIndex * ( state : ForkyBeaconState , pubkey : ValidatorPubKey ) :
Opt [ ValidatorIndex ] =
2021-12-29 02:50:49 +00:00
# This linear scan is unfortunate, but should be fairly fast as we do a simple
# byte comparison of the key. The alternative would be to build a Table, but
# given that each block can hold no more than 16 deposits, it's slower to
# build the table and use it for lookups than to scan it like this.
# Once we have a reusable, long-lived cache, this should be revisited
2024-02-20 04:34:57 +00:00
#
# For deposit processing purposes, two broad cases exist, either
#
# (a) someone has deposited all 32 required ETH as a single transaction,
# in which case the index doesn't yet exist so the search order does
# not matter so long as it's generally in an order memory controller
# prefetching can predict; or
#
# (b) the deposit has been split into multiple parts, typically not far
# apart from each other, such that on average one would expect this
# validator index to be nearer the maximal than minimal index.
#
# countdown() infinite-loops if the lower bound with uint32 is 0, so
# shift indices by 1, which avoids triggering unsigned wraparound.
for vidx in countdown ( state . validators . len . uint32 , 1 ) :
if state . validators . asSeq [ vidx - 1 ] . pubkey = = pubkey :
return Opt [ ValidatorIndex ] . ok ( ( vidx - 1 ) . ValidatorIndex )
2021-12-29 02:50:49 +00:00
2024-03-07 23:38:24 +00:00
from " .. " / bloomfilter import
PubkeyBloomFilter , constructBloomFilter , incl , mightContain
2024-04-26 07:18:44 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.5.0-alpha.0/specs/phase0/beacon-chain.md#deposits
# https://github.com/ethereum/consensus-specs/blob/v1.5.0-alpha.0/specs/electra/beacon-chain.md#updated--apply_deposit
2024-04-26 12:39:09 +00:00
proc apply_deposit (
2024-03-07 23:38:24 +00:00
cfg : RuntimeConfig , state : var ForkyBeaconState ,
2024-04-26 12:39:09 +00:00
bloom_filter : var PubkeyBloomFilter , deposit_data : DepositData ,
flags : UpdateFlags ) : Result [ void , cstring ] =
Implement split preset/config support (#2710)
* Implement split preset/config support
This is the initial bulk refactor to introduce runtime config values in
a number of places, somewhat replacing the existing mechanism of loading
network metadata.
It still needs more work, this is the initial refactor that introduces
runtime configuration in some of the places that need it.
The PR changes the way presets and constants work, to match the spec. In
particular, a "preset" now refers to the compile-time configuration
while a "cfg" or "RuntimeConfig" is the dynamic part.
A single binary can support either mainnet or minimal, but not both.
Support for other presets has been removed completely (can be readded,
in case there's need).
There's a number of outstanding tasks:
* `SECONDS_PER_SLOT` still needs fixing
* loading custom runtime configs needs redoing
* checking constants against YAML file
* yeerongpilly support
`build/nimbus_beacon_node --network=yeerongpilly --discv5:no --log-level=DEBUG`
* load fork epoch from config
* fix fork digest sent in status
* nicer error string for request failures
* fix tools
* one more
* fixup
* fixup
* fixup
* use "standard" network definition folder in local testnet
Files are loaded from their standard locations, including genesis etc,
to conform to the format used in the `eth2-networks` repo.
* fix launch scripts, allow unknown config values
* fix base config of rest test
* cleanups
* bundle mainnet config using common loader
* fix spec links and names
* only include supported preset in binary
* drop yeerongpilly, add altair-devnet-0, support boot_enr.yaml
2021-07-12 13:01:38 +00:00
let
2024-04-26 12:39:09 +00:00
pubkey = deposit_data . pubkey
amount = deposit_data . amount
2024-03-07 23:38:24 +00:00
index =
if bloom_filter . mightContain ( pubkey ) :
findValidatorIndex ( state , pubkey )
else :
Opt . none ( ValidatorIndex )
Implement split preset/config support (#2710)
* Implement split preset/config support
This is the initial bulk refactor to introduce runtime config values in
a number of places, somewhat replacing the existing mechanism of loading
network metadata.
It still needs more work, this is the initial refactor that introduces
runtime configuration in some of the places that need it.
The PR changes the way presets and constants work, to match the spec. In
particular, a "preset" now refers to the compile-time configuration
while a "cfg" or "RuntimeConfig" is the dynamic part.
A single binary can support either mainnet or minimal, but not both.
Support for other presets has been removed completely (can be readded,
in case there's need).
There's a number of outstanding tasks:
* `SECONDS_PER_SLOT` still needs fixing
* loading custom runtime configs needs redoing
* checking constants against YAML file
* yeerongpilly support
`build/nimbus_beacon_node --network=yeerongpilly --discv5:no --log-level=DEBUG`
* load fork epoch from config
* fix fork digest sent in status
* nicer error string for request failures
* fix tools
* one more
* fixup
* fixup
* fixup
* use "standard" network definition folder in local testnet
Files are loaded from their standard locations, including genesis etc,
to conform to the format used in the `eth2-networks` repo.
* fix launch scripts, allow unknown config values
* fix base config of rest test
* cleanups
* bundle mainnet config using common loader
* fix spec links and names
* only include supported preset in binary
* drop yeerongpilly, add altair-devnet-0, support boot_enr.yaml
2021-07-12 13:01:38 +00:00
2022-05-23 23:39:08 +00:00
if index . isSome ( ) :
Implement split preset/config support (#2710)
* Implement split preset/config support
This is the initial bulk refactor to introduce runtime config values in
a number of places, somewhat replacing the existing mechanism of loading
network metadata.
It still needs more work, this is the initial refactor that introduces
runtime configuration in some of the places that need it.
The PR changes the way presets and constants work, to match the spec. In
particular, a "preset" now refers to the compile-time configuration
while a "cfg" or "RuntimeConfig" is the dynamic part.
A single binary can support either mainnet or minimal, but not both.
Support for other presets has been removed completely (can be readded,
in case there's need).
There's a number of outstanding tasks:
* `SECONDS_PER_SLOT` still needs fixing
* loading custom runtime configs needs redoing
* checking constants against YAML file
* yeerongpilly support
`build/nimbus_beacon_node --network=yeerongpilly --discv5:no --log-level=DEBUG`
* load fork epoch from config
* fix fork digest sent in status
* nicer error string for request failures
* fix tools
* one more
* fixup
* fixup
* fixup
* use "standard" network definition folder in local testnet
Files are loaded from their standard locations, including genesis etc,
to conform to the format used in the `eth2-networks` repo.
* fix launch scripts, allow unknown config values
* fix base config of rest test
* cleanups
* bundle mainnet config using common loader
* fix spec links and names
* only include supported preset in binary
* drop yeerongpilly, add altair-devnet-0, support boot_enr.yaml
2021-07-12 13:01:38 +00:00
# Increase balance by deposit amount
2024-04-26 07:18:44 +00:00
when typeof ( state ) . kind < ConsensusFork . Electra :
increase_balance ( state , index . get ( ) , amount )
else :
2024-05-14 09:19:24 +00:00
debugComment " check hashlist add return "
2024-04-26 07:18:44 +00:00
discard state . pending_balance_deposits . add PendingBalanceDeposit (
index : index . get . uint64 , amount : amount ) # [Modified in Electra:EIP-7251]
# Check if valid deposit switch to compounding credentials
if is_compounding_withdrawal_credential (
2024-04-26 12:39:09 +00:00
deposit_data . withdrawal_credentials ) and
2024-04-26 07:18:44 +00:00
has_eth1_withdrawal_credential ( state . validators . item ( index . get ) ) and
2024-04-26 12:39:09 +00:00
verify_deposit_signature ( cfg , deposit_data ) :
2024-04-26 07:18:44 +00:00
switch_to_compounding_validator ( state , index . get )
Implement split preset/config support (#2710)
* Implement split preset/config support
This is the initial bulk refactor to introduce runtime config values in
a number of places, somewhat replacing the existing mechanism of loading
network metadata.
It still needs more work, this is the initial refactor that introduces
runtime configuration in some of the places that need it.
The PR changes the way presets and constants work, to match the spec. In
particular, a "preset" now refers to the compile-time configuration
while a "cfg" or "RuntimeConfig" is the dynamic part.
A single binary can support either mainnet or minimal, but not both.
Support for other presets has been removed completely (can be readded,
in case there's need).
There's a number of outstanding tasks:
* `SECONDS_PER_SLOT` still needs fixing
* loading custom runtime configs needs redoing
* checking constants against YAML file
* yeerongpilly support
`build/nimbus_beacon_node --network=yeerongpilly --discv5:no --log-level=DEBUG`
* load fork epoch from config
* fix fork digest sent in status
* nicer error string for request failures
* fix tools
* one more
* fixup
* fixup
* fixup
* use "standard" network definition folder in local testnet
Files are loaded from their standard locations, including genesis etc,
to conform to the format used in the `eth2-networks` repo.
* fix launch scripts, allow unknown config values
* fix base config of rest test
* cleanups
* bundle mainnet config using common loader
* fix spec links and names
* only include supported preset in binary
* drop yeerongpilly, add altair-devnet-0, support boot_enr.yaml
2021-07-12 13:01:38 +00:00
else :
# Verify the deposit signature (proof of possession) which is not checked
# by the deposit contract
2024-04-26 12:39:09 +00:00
if verify_deposit_signature ( cfg , deposit_data ) :
Implement split preset/config support (#2710)
* Implement split preset/config support
This is the initial bulk refactor to introduce runtime config values in
a number of places, somewhat replacing the existing mechanism of loading
network metadata.
It still needs more work, this is the initial refactor that introduces
runtime configuration in some of the places that need it.
The PR changes the way presets and constants work, to match the spec. In
particular, a "preset" now refers to the compile-time configuration
while a "cfg" or "RuntimeConfig" is the dynamic part.
A single binary can support either mainnet or minimal, but not both.
Support for other presets has been removed completely (can be readded,
in case there's need).
There's a number of outstanding tasks:
* `SECONDS_PER_SLOT` still needs fixing
* loading custom runtime configs needs redoing
* checking constants against YAML file
* yeerongpilly support
`build/nimbus_beacon_node --network=yeerongpilly --discv5:no --log-level=DEBUG`
* load fork epoch from config
* fix fork digest sent in status
* nicer error string for request failures
* fix tools
* one more
* fixup
* fixup
* fixup
* use "standard" network definition folder in local testnet
Files are loaded from their standard locations, including genesis etc,
to conform to the format used in the `eth2-networks` repo.
* fix launch scripts, allow unknown config values
* fix base config of rest test
* cleanups
* bundle mainnet config using common loader
* fix spec links and names
* only include supported preset in binary
* drop yeerongpilly, add altair-devnet-0, support boot_enr.yaml
2021-07-12 13:01:38 +00:00
# New validator! Add validator and balance entries
2024-04-26 07:18:44 +00:00
if not state . validators . add (
2024-04-26 12:39:09 +00:00
get_validator_from_deposit ( state , deposit_data ) ) :
return err ( " apply_deposit: too many validators " )
2024-04-26 07:18:44 +00:00
let initial_balance =
when typeof ( state ) . kind > = ConsensusFork . Electra :
0 . Gwei
else :
amount
if not state . balances . add ( initial_balance ) :
Implement split preset/config support (#2710)
* Implement split preset/config support
This is the initial bulk refactor to introduce runtime config values in
a number of places, somewhat replacing the existing mechanism of loading
network metadata.
It still needs more work, this is the initial refactor that introduces
runtime configuration in some of the places that need it.
The PR changes the way presets and constants work, to match the spec. In
particular, a "preset" now refers to the compile-time configuration
while a "cfg" or "RuntimeConfig" is the dynamic part.
A single binary can support either mainnet or minimal, but not both.
Support for other presets has been removed completely (can be readded,
in case there's need).
There's a number of outstanding tasks:
* `SECONDS_PER_SLOT` still needs fixing
* loading custom runtime configs needs redoing
* checking constants against YAML file
* yeerongpilly support
`build/nimbus_beacon_node --network=yeerongpilly --discv5:no --log-level=DEBUG`
* load fork epoch from config
* fix fork digest sent in status
* nicer error string for request failures
* fix tools
* one more
* fixup
* fixup
* fixup
* use "standard" network definition folder in local testnet
Files are loaded from their standard locations, including genesis etc,
to conform to the format used in the `eth2-networks` repo.
* fix launch scripts, allow unknown config values
* fix base config of rest test
* cleanups
* bundle mainnet config using common loader
* fix spec links and names
* only include supported preset in binary
* drop yeerongpilly, add altair-devnet-0, support boot_enr.yaml
2021-07-12 13:01:38 +00:00
static : doAssert state . balances . maxLen = = state . validators . maxLen
raiseAssert " adding validator succeeded, so should balances "
2024-04-25 08:41:17 +00:00
when typeof ( state ) . kind > = ConsensusFork . Altair :
Implement split preset/config support (#2710)
* Implement split preset/config support
This is the initial bulk refactor to introduce runtime config values in
a number of places, somewhat replacing the existing mechanism of loading
network metadata.
It still needs more work, this is the initial refactor that introduces
runtime configuration in some of the places that need it.
The PR changes the way presets and constants work, to match the spec. In
particular, a "preset" now refers to the compile-time configuration
while a "cfg" or "RuntimeConfig" is the dynamic part.
A single binary can support either mainnet or minimal, but not both.
Support for other presets has been removed completely (can be readded,
in case there's need).
There's a number of outstanding tasks:
* `SECONDS_PER_SLOT` still needs fixing
* loading custom runtime configs needs redoing
* checking constants against YAML file
* yeerongpilly support
`build/nimbus_beacon_node --network=yeerongpilly --discv5:no --log-level=DEBUG`
* load fork epoch from config
* fix fork digest sent in status
* nicer error string for request failures
* fix tools
* one more
* fixup
* fixup
* fixup
* use "standard" network definition folder in local testnet
Files are loaded from their standard locations, including genesis etc,
to conform to the format used in the `eth2-networks` repo.
* fix launch scripts, allow unknown config values
* fix base config of rest test
* cleanups
* bundle mainnet config using common loader
* fix spec links and names
* only include supported preset in binary
* drop yeerongpilly, add altair-devnet-0, support boot_enr.yaml
2021-07-12 13:01:38 +00:00
if not state . previous_epoch_participation . add ( ParticipationFlags ( 0 ) ) :
2024-04-26 12:39:09 +00:00
return err ( " apply_deposit: too many validators (previous_epoch_participation) " )
Implement split preset/config support (#2710)
* Implement split preset/config support
This is the initial bulk refactor to introduce runtime config values in
a number of places, somewhat replacing the existing mechanism of loading
network metadata.
It still needs more work, this is the initial refactor that introduces
runtime configuration in some of the places that need it.
The PR changes the way presets and constants work, to match the spec. In
particular, a "preset" now refers to the compile-time configuration
while a "cfg" or "RuntimeConfig" is the dynamic part.
A single binary can support either mainnet or minimal, but not both.
Support for other presets has been removed completely (can be readded,
in case there's need).
There's a number of outstanding tasks:
* `SECONDS_PER_SLOT` still needs fixing
* loading custom runtime configs needs redoing
* checking constants against YAML file
* yeerongpilly support
`build/nimbus_beacon_node --network=yeerongpilly --discv5:no --log-level=DEBUG`
* load fork epoch from config
* fix fork digest sent in status
* nicer error string for request failures
* fix tools
* one more
* fixup
* fixup
* fixup
* use "standard" network definition folder in local testnet
Files are loaded from their standard locations, including genesis etc,
to conform to the format used in the `eth2-networks` repo.
* fix launch scripts, allow unknown config values
* fix base config of rest test
* cleanups
* bundle mainnet config using common loader
* fix spec links and names
* only include supported preset in binary
* drop yeerongpilly, add altair-devnet-0, support boot_enr.yaml
2021-07-12 13:01:38 +00:00
if not state . current_epoch_participation . add ( ParticipationFlags ( 0 ) ) :
2024-04-26 12:39:09 +00:00
return err ( " apply_deposit: too many validators (current_epoch_participation) " )
Implement split preset/config support (#2710)
* Implement split preset/config support
This is the initial bulk refactor to introduce runtime config values in
a number of places, somewhat replacing the existing mechanism of loading
network metadata.
It still needs more work, this is the initial refactor that introduces
runtime configuration in some of the places that need it.
The PR changes the way presets and constants work, to match the spec. In
particular, a "preset" now refers to the compile-time configuration
while a "cfg" or "RuntimeConfig" is the dynamic part.
A single binary can support either mainnet or minimal, but not both.
Support for other presets has been removed completely (can be readded,
in case there's need).
There's a number of outstanding tasks:
* `SECONDS_PER_SLOT` still needs fixing
* loading custom runtime configs needs redoing
* checking constants against YAML file
* yeerongpilly support
`build/nimbus_beacon_node --network=yeerongpilly --discv5:no --log-level=DEBUG`
* load fork epoch from config
* fix fork digest sent in status
* nicer error string for request failures
* fix tools
* one more
* fixup
* fixup
* fixup
* use "standard" network definition folder in local testnet
Files are loaded from their standard locations, including genesis etc,
to conform to the format used in the `eth2-networks` repo.
* fix launch scripts, allow unknown config values
* fix base config of rest test
* cleanups
* bundle mainnet config using common loader
* fix spec links and names
* only include supported preset in binary
* drop yeerongpilly, add altair-devnet-0, support boot_enr.yaml
2021-07-12 13:01:38 +00:00
if not state . inactivity_scores . add ( 0 'u64 ) :
2024-04-26 12:39:09 +00:00
return err ( " apply_deposit: too many validators (inactivity_scores) " )
2024-04-26 07:18:44 +00:00
when typeof ( state ) . kind > = ConsensusFork . Electra :
2024-05-14 09:19:24 +00:00
debugComment " check hashlist add return "
Implement split preset/config support (#2710)
* Implement split preset/config support
This is the initial bulk refactor to introduce runtime config values in
a number of places, somewhat replacing the existing mechanism of loading
network metadata.
It still needs more work, this is the initial refactor that introduces
runtime configuration in some of the places that need it.
The PR changes the way presets and constants work, to match the spec. In
particular, a "preset" now refers to the compile-time configuration
while a "cfg" or "RuntimeConfig" is the dynamic part.
A single binary can support either mainnet or minimal, but not both.
Support for other presets has been removed completely (can be readded,
in case there's need).
There's a number of outstanding tasks:
* `SECONDS_PER_SLOT` still needs fixing
* loading custom runtime configs needs redoing
* checking constants against YAML file
* yeerongpilly support
`build/nimbus_beacon_node --network=yeerongpilly --discv5:no --log-level=DEBUG`
* load fork epoch from config
* fix fork digest sent in status
* nicer error string for request failures
* fix tools
* one more
* fixup
* fixup
* fixup
* use "standard" network definition folder in local testnet
Files are loaded from their standard locations, including genesis etc,
to conform to the format used in the `eth2-networks` repo.
* fix launch scripts, allow unknown config values
* fix base config of rest test
* cleanups
* bundle mainnet config using common loader
* fix spec links and names
* only include supported preset in binary
* drop yeerongpilly, add altair-devnet-0, support boot_enr.yaml
2021-07-12 13:01:38 +00:00
2024-04-26 07:18:44 +00:00
# [New in Electra:EIP7251]
discard state . pending_balance_deposits . add PendingBalanceDeposit (
index : state . validators . lenu64 - 1 , amount : amount )
Implement split preset/config support (#2710)
* Implement split preset/config support
This is the initial bulk refactor to introduce runtime config values in
a number of places, somewhat replacing the existing mechanism of loading
network metadata.
It still needs more work, this is the initial refactor that introduces
runtime configuration in some of the places that need it.
The PR changes the way presets and constants work, to match the spec. In
particular, a "preset" now refers to the compile-time configuration
while a "cfg" or "RuntimeConfig" is the dynamic part.
A single binary can support either mainnet or minimal, but not both.
Support for other presets has been removed completely (can be readded,
in case there's need).
There's a number of outstanding tasks:
* `SECONDS_PER_SLOT` still needs fixing
* loading custom runtime configs needs redoing
* checking constants against YAML file
* yeerongpilly support
`build/nimbus_beacon_node --network=yeerongpilly --discv5:no --log-level=DEBUG`
* load fork epoch from config
* fix fork digest sent in status
* nicer error string for request failures
* fix tools
* one more
* fixup
* fixup
* fixup
* use "standard" network definition folder in local testnet
Files are loaded from their standard locations, including genesis etc,
to conform to the format used in the `eth2-networks` repo.
* fix launch scripts, allow unknown config values
* fix base config of rest test
* cleanups
* bundle mainnet config using common loader
* fix spec links and names
* only include supported preset in binary
* drop yeerongpilly, add altair-devnet-0, support boot_enr.yaml
2021-07-12 13:01:38 +00:00
doAssert state . validators . len = = state . balances . len
2024-03-07 23:38:24 +00:00
bloom_filter . incl pubkey
Implement split preset/config support (#2710)
* Implement split preset/config support
This is the initial bulk refactor to introduce runtime config values in
a number of places, somewhat replacing the existing mechanism of loading
network metadata.
It still needs more work, this is the initial refactor that introduces
runtime configuration in some of the places that need it.
The PR changes the way presets and constants work, to match the spec. In
particular, a "preset" now refers to the compile-time configuration
while a "cfg" or "RuntimeConfig" is the dynamic part.
A single binary can support either mainnet or minimal, but not both.
Support for other presets has been removed completely (can be readded,
in case there's need).
There's a number of outstanding tasks:
* `SECONDS_PER_SLOT` still needs fixing
* loading custom runtime configs needs redoing
* checking constants against YAML file
* yeerongpilly support
`build/nimbus_beacon_node --network=yeerongpilly --discv5:no --log-level=DEBUG`
* load fork epoch from config
* fix fork digest sent in status
* nicer error string for request failures
* fix tools
* one more
* fixup
* fixup
* fixup
* use "standard" network definition folder in local testnet
Files are loaded from their standard locations, including genesis etc,
to conform to the format used in the `eth2-networks` repo.
* fix launch scripts, allow unknown config values
* fix base config of rest test
* cleanups
* bundle mainnet config using common loader
* fix spec links and names
* only include supported preset in binary
* drop yeerongpilly, add altair-devnet-0, support boot_enr.yaml
2021-07-12 13:01:38 +00:00
else :
# Deposits may come with invalid signatures - in that case, they are not
# turned into a validator but still get processed to keep the deposit
# index correct
trace " Skipping deposit with invalid signature " ,
2024-04-26 12:39:09 +00:00
deposit = shortLog ( deposit_data )
2020-09-24 17:05:49 +00:00
2020-07-03 17:03:14 +00:00
ok ( )
2019-09-10 22:03:06 +00:00
2024-04-26 12:39:09 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.5.0-alpha.0/specs/phase0/beacon-chain.md#deposits
proc process_deposit * (
cfg : RuntimeConfig , state : var ForkyBeaconState ,
bloom_filter : var PubkeyBloomFilter , deposit : Deposit , flags : UpdateFlags ) :
Result [ void , cstring ] =
## Process an Eth1 deposit, registering a validator or increasing its balance.
# Verify the Merkle branch
if not is_valid_merkle_branch (
hash_tree_root ( deposit . data ) ,
deposit . proof ,
DEPOSIT_CONTRACT_TREE_DEPTH + 1 , # Add 1 for the `List` length mix-in
state . eth1_deposit_index ,
state . eth1_data . deposit_root ,
) :
return err ( " process_deposit: deposit Merkle validation failed " )
# Deposits must be processed in order
state . eth1_deposit_index + = 1
apply_deposit ( cfg , state , bloom_filter , deposit . data , flags )
2024-04-28 09:15:03 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.5.0-alpha.0/specs/electra/beacon-chain.md#new-process_deposit_receipt
func process_deposit_receipt * (
cfg : RuntimeConfig , state : var electra . BeaconState ,
bloom_filter : var PubkeyBloomFilter , deposit_receipt : DepositReceipt ,
flags : UpdateFlags ) : Result [ void , cstring ] =
# Set deposit receipt start index
if state . deposit_receipts_start_index = =
UNSET_DEPOSIT_RECEIPTS_START_INDEX :
state . deposit_receipts_start_index = deposit_receipt . index
apply_deposit (
cfg , state , bloom_filter , DepositData (
pubkey : deposit_receipt . pubkey ,
withdrawal_credentials : deposit_receipt . withdrawal_credentials ,
amount : deposit_receipt . amount ,
signature : deposit_receipt . signature ) , flags )
2024-04-18 01:00:04 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.4.0/specs/phase0/beacon-chain.md#voluntary-exits
2024-04-17 03:51:16 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.4.0/specs/deneb/beacon-chain.md#modified-process_voluntary_exit
2024-04-25 08:41:17 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.5.0-alpha.0/specs/electra/beacon-chain.md#updated-process_voluntary_exit
2020-09-24 17:05:49 +00:00
proc check_voluntary_exit * (
Implement split preset/config support (#2710)
* Implement split preset/config support
This is the initial bulk refactor to introduce runtime config values in
a number of places, somewhat replacing the existing mechanism of loading
network metadata.
It still needs more work, this is the initial refactor that introduces
runtime configuration in some of the places that need it.
The PR changes the way presets and constants work, to match the spec. In
particular, a "preset" now refers to the compile-time configuration
while a "cfg" or "RuntimeConfig" is the dynamic part.
A single binary can support either mainnet or minimal, but not both.
Support for other presets has been removed completely (can be readded,
in case there's need).
There's a number of outstanding tasks:
* `SECONDS_PER_SLOT` still needs fixing
* loading custom runtime configs needs redoing
* checking constants against YAML file
* yeerongpilly support
`build/nimbus_beacon_node --network=yeerongpilly --discv5:no --log-level=DEBUG`
* load fork epoch from config
* fix fork digest sent in status
* nicer error string for request failures
* fix tools
* one more
* fixup
* fixup
* fixup
* use "standard" network definition folder in local testnet
Files are loaded from their standard locations, including genesis etc,
to conform to the format used in the `eth2-networks` repo.
* fix launch scripts, allow unknown config values
* fix base config of rest test
* cleanups
* bundle mainnet config using common loader
* fix spec links and names
* only include supported preset in binary
* drop yeerongpilly, add altair-devnet-0, support boot_enr.yaml
2021-07-12 13:01:38 +00:00
cfg : RuntimeConfig ,
2021-11-05 07:34:34 +00:00
state : ForkyBeaconState ,
2021-01-25 18:45:48 +00:00
signed_voluntary_exit : SomeSignedVoluntaryExit ,
2022-05-23 23:39:08 +00:00
flags : UpdateFlags ) : Result [ ValidatorIndex , cstring ] =
2019-09-10 00:14:03 +00:00
2019-12-16 18:08:50 +00:00
let voluntary_exit = signed_voluntary_exit . message
2020-07-26 18:55:48 +00:00
if voluntary_exit . validator_index > = state . validators . lenu64 :
2022-01-31 11:57:16 +00:00
return err ( " Exit: invalid validator index " )
2019-06-28 13:44:44 +00:00
2022-05-30 13:30:42 +00:00
let validator = unsafeAddr state . validators [ voluntary_exit . validator_index ]
2019-06-28 13:44:44 +00:00
2019-09-10 00:14:03 +00:00
# Verify the validator is active
performance fixes (#2259)
* performance fixes
* don't mark tree cache as dirty on read-only List accesses
* store only blob in memory for keys and signatures, parse blob lazily
* compare public keys by blob instead of parsing / converting to raw
* compare Eth2Digest using non-constant-time comparison
* avoid some unnecessary validator copying
This branch will in particular speed up deposit processing which has
been slowing down block replay.
Pre (mainnet, 1600 blocks):
```
All time are ms
Average, StdDev, Min, Max, Samples, Test
Validation is turned off meaning that no BLS operations are performed
3450.269, 0.000, 3450.269, 3450.269, 1, Initialize DB
0.417, 0.822, 0.036, 21.098, 1400, Load block from database
16.521, 0.000, 16.521, 16.521, 1, Load state from database
27.906, 50.846, 8.104, 1507.633, 1350, Apply block
52.617, 37.029, 20.640, 135.938, 50, Apply epoch block
```
Post:
```
3502.715, 0.000, 3502.715, 3502.715, 1, Initialize DB
0.080, 0.560, 0.035, 21.015, 1400, Load block from database
17.595, 0.000, 17.595, 17.595, 1, Load state from database
15.706, 11.028, 8.300, 107.537, 1350, Apply block
33.217, 12.622, 17.331, 60.580, 50, Apply epoch block
```
* more perf fixes
* load EpochRef cache into StateCache more aggressively
* point out security concern with public key cache
* reuse proposer index from state when processing block
* avoid genericAssign in a few more places
* don't parse key when signature is unparseable
* fix `==` overload for Eth2Digest
* preallocate validator list when getting active validators
* speed up proposer index calculation a little bit
* reuse cache when replaying blocks in ncli_db
* avoid a few more copying loops
```
Average, StdDev, Min, Max, Samples, Test
Validation is turned off meaning that no BLS operations are performed
3279.158, 0.000, 3279.158, 3279.158, 1, Initialize DB
0.072, 0.357, 0.035, 13.400, 1400, Load block from database
17.295, 0.000, 17.295, 17.295, 1, Load state from database
5.918, 9.896, 0.198, 98.028, 1350, Apply block
15.888, 10.951, 7.902, 39.535, 50, Apply epoch block
0.000, 0.000, 0.000, 0.000, 0, Database block store
```
* clear full balance cache before processing rewards and penalties
```
All time are ms
Average, StdDev, Min, Max, Samples, Test
Validation is turned off meaning that no BLS operations are performed
3947.901, 0.000, 3947.901, 3947.901, 1, Initialize DB
0.124, 0.506, 0.026, 202.370, 363345, Load block from database
97.614, 0.000, 97.614, 97.614, 1, Load state from database
0.186, 0.188, 0.012, 99.561, 357262, Advance slot, non-epoch
14.161, 5.966, 1.099, 395.511, 11524, Advance slot, epoch
1.372, 4.170, 0.017, 276.401, 363345, Apply block, no slot processing
0.000, 0.000, 0.000, 0.000, 0, Database block store
```
2021-01-25 12:04:18 +00:00
if not is_active_validator ( validator [ ] , get_current_epoch ( state ) ) :
2022-01-31 11:57:16 +00:00
return err ( " Exit: validator not active " )
2019-06-28 13:44:44 +00:00
2020-07-08 20:36:26 +00:00
# Verify exit has not been initiated
performance fixes (#2259)
* performance fixes
* don't mark tree cache as dirty on read-only List accesses
* store only blob in memory for keys and signatures, parse blob lazily
* compare public keys by blob instead of parsing / converting to raw
* compare Eth2Digest using non-constant-time comparison
* avoid some unnecessary validator copying
This branch will in particular speed up deposit processing which has
been slowing down block replay.
Pre (mainnet, 1600 blocks):
```
All time are ms
Average, StdDev, Min, Max, Samples, Test
Validation is turned off meaning that no BLS operations are performed
3450.269, 0.000, 3450.269, 3450.269, 1, Initialize DB
0.417, 0.822, 0.036, 21.098, 1400, Load block from database
16.521, 0.000, 16.521, 16.521, 1, Load state from database
27.906, 50.846, 8.104, 1507.633, 1350, Apply block
52.617, 37.029, 20.640, 135.938, 50, Apply epoch block
```
Post:
```
3502.715, 0.000, 3502.715, 3502.715, 1, Initialize DB
0.080, 0.560, 0.035, 21.015, 1400, Load block from database
17.595, 0.000, 17.595, 17.595, 1, Load state from database
15.706, 11.028, 8.300, 107.537, 1350, Apply block
33.217, 12.622, 17.331, 60.580, 50, Apply epoch block
```
* more perf fixes
* load EpochRef cache into StateCache more aggressively
* point out security concern with public key cache
* reuse proposer index from state when processing block
* avoid genericAssign in a few more places
* don't parse key when signature is unparseable
* fix `==` overload for Eth2Digest
* preallocate validator list when getting active validators
* speed up proposer index calculation a little bit
* reuse cache when replaying blocks in ncli_db
* avoid a few more copying loops
```
Average, StdDev, Min, Max, Samples, Test
Validation is turned off meaning that no BLS operations are performed
3279.158, 0.000, 3279.158, 3279.158, 1, Initialize DB
0.072, 0.357, 0.035, 13.400, 1400, Load block from database
17.295, 0.000, 17.295, 17.295, 1, Load state from database
5.918, 9.896, 0.198, 98.028, 1350, Apply block
15.888, 10.951, 7.902, 39.535, 50, Apply epoch block
0.000, 0.000, 0.000, 0.000, 0, Database block store
```
* clear full balance cache before processing rewards and penalties
```
All time are ms
Average, StdDev, Min, Max, Samples, Test
Validation is turned off meaning that no BLS operations are performed
3947.901, 0.000, 3947.901, 3947.901, 1, Initialize DB
0.124, 0.506, 0.026, 202.370, 363345, Load block from database
97.614, 0.000, 97.614, 97.614, 1, Load state from database
0.186, 0.188, 0.012, 99.561, 357262, Advance slot, non-epoch
14.161, 5.966, 1.099, 395.511, 11524, Advance slot, epoch
1.372, 4.170, 0.017, 276.401, 363345, Apply block, no slot processing
0.000, 0.000, 0.000, 0.000, 0, Database block store
```
2021-01-25 12:04:18 +00:00
if validator [ ] . exit_epoch ! = FAR_FUTURE_EPOCH :
2022-01-31 11:57:16 +00:00
return err ( " Exit: validator has exited " )
2019-06-28 13:44:44 +00:00
2020-07-03 17:03:14 +00:00
# Exits must specify an epoch when they become valid; they are not valid
# before then
2019-12-16 18:08:50 +00:00
if not ( get_current_epoch ( state ) > = voluntary_exit . epoch ) :
2022-01-31 11:57:16 +00:00
return err ( " Exit: exit epoch not passed " )
2019-06-28 13:44:44 +00:00
2019-09-10 00:14:03 +00:00
# Verify the validator has been active long enough
performance fixes (#2259)
* performance fixes
* don't mark tree cache as dirty on read-only List accesses
* store only blob in memory for keys and signatures, parse blob lazily
* compare public keys by blob instead of parsing / converting to raw
* compare Eth2Digest using non-constant-time comparison
* avoid some unnecessary validator copying
This branch will in particular speed up deposit processing which has
been slowing down block replay.
Pre (mainnet, 1600 blocks):
```
All time are ms
Average, StdDev, Min, Max, Samples, Test
Validation is turned off meaning that no BLS operations are performed
3450.269, 0.000, 3450.269, 3450.269, 1, Initialize DB
0.417, 0.822, 0.036, 21.098, 1400, Load block from database
16.521, 0.000, 16.521, 16.521, 1, Load state from database
27.906, 50.846, 8.104, 1507.633, 1350, Apply block
52.617, 37.029, 20.640, 135.938, 50, Apply epoch block
```
Post:
```
3502.715, 0.000, 3502.715, 3502.715, 1, Initialize DB
0.080, 0.560, 0.035, 21.015, 1400, Load block from database
17.595, 0.000, 17.595, 17.595, 1, Load state from database
15.706, 11.028, 8.300, 107.537, 1350, Apply block
33.217, 12.622, 17.331, 60.580, 50, Apply epoch block
```
* more perf fixes
* load EpochRef cache into StateCache more aggressively
* point out security concern with public key cache
* reuse proposer index from state when processing block
* avoid genericAssign in a few more places
* don't parse key when signature is unparseable
* fix `==` overload for Eth2Digest
* preallocate validator list when getting active validators
* speed up proposer index calculation a little bit
* reuse cache when replaying blocks in ncli_db
* avoid a few more copying loops
```
Average, StdDev, Min, Max, Samples, Test
Validation is turned off meaning that no BLS operations are performed
3279.158, 0.000, 3279.158, 3279.158, 1, Initialize DB
0.072, 0.357, 0.035, 13.400, 1400, Load block from database
17.295, 0.000, 17.295, 17.295, 1, Load state from database
5.918, 9.896, 0.198, 98.028, 1350, Apply block
15.888, 10.951, 7.902, 39.535, 50, Apply epoch block
0.000, 0.000, 0.000, 0.000, 0, Database block store
```
* clear full balance cache before processing rewards and penalties
```
All time are ms
Average, StdDev, Min, Max, Samples, Test
Validation is turned off meaning that no BLS operations are performed
3947.901, 0.000, 3947.901, 3947.901, 1, Initialize DB
0.124, 0.506, 0.026, 202.370, 363345, Load block from database
97.614, 0.000, 97.614, 97.614, 1, Load state from database
0.186, 0.188, 0.012, 99.561, 357262, Advance slot, non-epoch
14.161, 5.966, 1.099, 395.511, 11524, Advance slot, epoch
1.372, 4.170, 0.017, 276.401, 363345, Apply block, no slot processing
0.000, 0.000, 0.000, 0.000, 0, Database block store
```
2021-01-25 12:04:18 +00:00
if not ( get_current_epoch ( state ) > = validator [ ] . activation_epoch +
Implement split preset/config support (#2710)
* Implement split preset/config support
This is the initial bulk refactor to introduce runtime config values in
a number of places, somewhat replacing the existing mechanism of loading
network metadata.
It still needs more work, this is the initial refactor that introduces
runtime configuration in some of the places that need it.
The PR changes the way presets and constants work, to match the spec. In
particular, a "preset" now refers to the compile-time configuration
while a "cfg" or "RuntimeConfig" is the dynamic part.
A single binary can support either mainnet or minimal, but not both.
Support for other presets has been removed completely (can be readded,
in case there's need).
There's a number of outstanding tasks:
* `SECONDS_PER_SLOT` still needs fixing
* loading custom runtime configs needs redoing
* checking constants against YAML file
* yeerongpilly support
`build/nimbus_beacon_node --network=yeerongpilly --discv5:no --log-level=DEBUG`
* load fork epoch from config
* fix fork digest sent in status
* nicer error string for request failures
* fix tools
* one more
* fixup
* fixup
* fixup
* use "standard" network definition folder in local testnet
Files are loaded from their standard locations, including genesis etc,
to conform to the format used in the `eth2-networks` repo.
* fix launch scripts, allow unknown config values
* fix base config of rest test
* cleanups
* bundle mainnet config using common loader
* fix spec links and names
* only include supported preset in binary
* drop yeerongpilly, add altair-devnet-0, support boot_enr.yaml
2021-07-12 13:01:38 +00:00
cfg . SHARD_COMMITTEE_PERIOD ) :
2022-01-31 11:57:16 +00:00
return err ( " Exit: not in validator set long enough " )
2019-06-28 13:44:44 +00:00
2024-04-25 08:41:17 +00:00
when typeof ( state ) . kind > = ConsensusFork . Electra :
# Only exit validator if it has no pending withdrawals in the queue
2024-05-14 09:19:24 +00:00
debugComment " truncating "
2024-04-25 08:41:17 +00:00
if not ( get_pending_balance_to_withdraw (
state , voluntary_exit . validator_index . ValidatorIndex ) = = 0 . Gwei ) :
return err ( " Exit: still has pending withdrawals " )
2019-09-10 00:14:03 +00:00
# Verify signature
2020-03-05 12:52:10 +00:00
if skipBlsValidation notin flags :
fix EIP-7044 implementation when using batch verification (#5953)
In #5120, EIP-7044 support got added to the state transition function to
force `CAPELLA_FORK_VERSION` to be used when validiting `VoluntaryExit`
messages, irrespective of their `epoch`.
In #5637, similar logic was added when batch verifying BLS signatures,
which is used during gossip validation (libp2p gossipsub, and req/resp).
However, that logic did not match the one introduced in #5120, and only
uses `CAPELLA_FORK_VERSION` when a `VoluntaryExit`'s `epoch` was set to
a value `>= CAPELLA_FORK_EPOCH`. Otherwise, `BELLATRIX_FORK_VERSION`
would still be used when validating `VoluntaryExit`, e.g., with `epoch`
set to `0`, as is the case in this Holesky block:
- https://holesky.beaconcha.in/slot/1076985#voluntary-exits
Extracting the correct logic from #5120 into a function, and reusing it
when verifying BLS signatures fixes this issue, and also leverages the
exhaustive EF test suite that covers the (correct) #5120 logic.
This fix only affects networks that have EIP-7044 applied (post-Deneb).
Without the fix, Deneb blocks with a `VoluntaryExit` with `epoch` set to
`< CAPELLA_FORK_EPOCH` incorrectly fail to validate despite being valid.
Incorrect blocks that contain a malicious `VoluntaryExit` with `epoch`
set to `< CAPELLA_FORK_EPOCH` and signed using `BELLATRIX_FORK_VERSION`
_would_ pass the BLS verification stage, but subsequently fail the state
transition logic. Such blocks would still correctly be labeled invalid.
2024-02-25 14:25:26 +00:00
const consensusFork = typeof ( state ) . kind
let voluntary_exit_fork = consensusFork . voluntary_exit_signature_fork (
state . fork , cfg . CAPELLA_FORK_VERSION )
2020-06-16 05:45:04 +00:00
if not verify_voluntary_exit_signature (
fix EIP-7044 implementation when using batch verification (#5953)
In #5120, EIP-7044 support got added to the state transition function to
force `CAPELLA_FORK_VERSION` to be used when validiting `VoluntaryExit`
messages, irrespective of their `epoch`.
In #5637, similar logic was added when batch verifying BLS signatures,
which is used during gossip validation (libp2p gossipsub, and req/resp).
However, that logic did not match the one introduced in #5120, and only
uses `CAPELLA_FORK_VERSION` when a `VoluntaryExit`'s `epoch` was set to
a value `>= CAPELLA_FORK_EPOCH`. Otherwise, `BELLATRIX_FORK_VERSION`
would still be used when validating `VoluntaryExit`, e.g., with `epoch`
set to `0`, as is the case in this Holesky block:
- https://holesky.beaconcha.in/slot/1076985#voluntary-exits
Extracting the correct logic from #5120 into a function, and reusing it
when verifying BLS signatures fixes this issue, and also leverages the
exhaustive EF test suite that covers the (correct) #5120 logic.
This fix only affects networks that have EIP-7044 applied (post-Deneb).
Without the fix, Deneb blocks with a `VoluntaryExit` with `epoch` set to
`< CAPELLA_FORK_EPOCH` incorrectly fail to validate despite being valid.
Incorrect blocks that contain a malicious `VoluntaryExit` with `epoch`
set to `< CAPELLA_FORK_EPOCH` and signed using `BELLATRIX_FORK_VERSION`
_would_ pass the BLS verification stage, but subsequently fail the state
transition logic. Such blocks would still correctly be labeled invalid.
2024-02-25 14:25:26 +00:00
voluntary_exit_fork , state . genesis_validators_root , voluntary_exit ,
performance fixes (#2259)
* performance fixes
* don't mark tree cache as dirty on read-only List accesses
* store only blob in memory for keys and signatures, parse blob lazily
* compare public keys by blob instead of parsing / converting to raw
* compare Eth2Digest using non-constant-time comparison
* avoid some unnecessary validator copying
This branch will in particular speed up deposit processing which has
been slowing down block replay.
Pre (mainnet, 1600 blocks):
```
All time are ms
Average, StdDev, Min, Max, Samples, Test
Validation is turned off meaning that no BLS operations are performed
3450.269, 0.000, 3450.269, 3450.269, 1, Initialize DB
0.417, 0.822, 0.036, 21.098, 1400, Load block from database
16.521, 0.000, 16.521, 16.521, 1, Load state from database
27.906, 50.846, 8.104, 1507.633, 1350, Apply block
52.617, 37.029, 20.640, 135.938, 50, Apply epoch block
```
Post:
```
3502.715, 0.000, 3502.715, 3502.715, 1, Initialize DB
0.080, 0.560, 0.035, 21.015, 1400, Load block from database
17.595, 0.000, 17.595, 17.595, 1, Load state from database
15.706, 11.028, 8.300, 107.537, 1350, Apply block
33.217, 12.622, 17.331, 60.580, 50, Apply epoch block
```
* more perf fixes
* load EpochRef cache into StateCache more aggressively
* point out security concern with public key cache
* reuse proposer index from state when processing block
* avoid genericAssign in a few more places
* don't parse key when signature is unparseable
* fix `==` overload for Eth2Digest
* preallocate validator list when getting active validators
* speed up proposer index calculation a little bit
* reuse cache when replaying blocks in ncli_db
* avoid a few more copying loops
```
Average, StdDev, Min, Max, Samples, Test
Validation is turned off meaning that no BLS operations are performed
3279.158, 0.000, 3279.158, 3279.158, 1, Initialize DB
0.072, 0.357, 0.035, 13.400, 1400, Load block from database
17.295, 0.000, 17.295, 17.295, 1, Load state from database
5.918, 9.896, 0.198, 98.028, 1350, Apply block
15.888, 10.951, 7.902, 39.535, 50, Apply epoch block
0.000, 0.000, 0.000, 0.000, 0, Database block store
```
* clear full balance cache before processing rewards and penalties
```
All time are ms
Average, StdDev, Min, Max, Samples, Test
Validation is turned off meaning that no BLS operations are performed
3947.901, 0.000, 3947.901, 3947.901, 1, Initialize DB
0.124, 0.506, 0.026, 202.370, 363345, Load block from database
97.614, 0.000, 97.614, 97.614, 1, Load state from database
0.186, 0.188, 0.012, 99.561, 357262, Advance slot, non-epoch
14.161, 5.966, 1.099, 395.511, 11524, Advance slot, epoch
1.372, 4.170, 0.017, 276.401, 363345, Apply block, no slot processing
0.000, 0.000, 0.000, 0.000, 0, Database block store
```
2021-01-25 12:04:18 +00:00
validator [ ] . pubkey , signed_voluntary_exit . signature ) :
2022-01-31 11:57:16 +00:00
return err ( " Exit: invalid signature " )
2019-06-28 13:44:44 +00:00
2022-05-23 23:39:08 +00:00
# Checked above
ValidatorIndex . init ( voluntary_exit . validator_index )
2019-06-28 13:44:44 +00:00
2021-11-05 07:34:34 +00:00
proc check_voluntary_exit * (
2023-05-09 18:16:49 +00:00
cfg : RuntimeConfig , state : ForkedHashedBeaconState ,
signed_voluntary_exit : SomeSignedVoluntaryExit ,
2022-05-23 23:39:08 +00:00
flags : UpdateFlags ) : Result [ ValidatorIndex , cstring ] =
2021-11-05 07:34:34 +00:00
withState ( state ) :
2022-08-31 11:29:34 +00:00
check_voluntary_exit ( cfg , forkyState . data , signed_voluntary_exit , flags )
2021-11-05 07:34:34 +00:00
2024-02-22 02:42:57 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.4.0-beta.7/specs/phase0/beacon-chain.md#voluntary-exits
2024-04-25 08:41:17 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.5.0-alpha.0/specs/electra/beacon-chain.md#updated-process_voluntary_exit
2020-09-24 17:05:49 +00:00
proc process_voluntary_exit * (
Implement split preset/config support (#2710)
* Implement split preset/config support
This is the initial bulk refactor to introduce runtime config values in
a number of places, somewhat replacing the existing mechanism of loading
network metadata.
It still needs more work, this is the initial refactor that introduces
runtime configuration in some of the places that need it.
The PR changes the way presets and constants work, to match the spec. In
particular, a "preset" now refers to the compile-time configuration
while a "cfg" or "RuntimeConfig" is the dynamic part.
A single binary can support either mainnet or minimal, but not both.
Support for other presets has been removed completely (can be readded,
in case there's need).
There's a number of outstanding tasks:
* `SECONDS_PER_SLOT` still needs fixing
* loading custom runtime configs needs redoing
* checking constants against YAML file
* yeerongpilly support
`build/nimbus_beacon_node --network=yeerongpilly --discv5:no --log-level=DEBUG`
* load fork epoch from config
* fix fork digest sent in status
* nicer error string for request failures
* fix tools
* one more
* fixup
* fixup
* fixup
* use "standard" network definition folder in local testnet
Files are loaded from their standard locations, including genesis etc,
to conform to the format used in the `eth2-networks` repo.
* fix launch scripts, allow unknown config values
* fix base config of rest test
* cleanups
* bundle mainnet config using common loader
* fix spec links and names
* only include supported preset in binary
* drop yeerongpilly, add altair-devnet-0, support boot_enr.yaml
2021-07-12 13:01:38 +00:00
cfg : RuntimeConfig ,
2021-11-05 07:34:34 +00:00
state : var ForkyBeaconState ,
2021-01-25 18:45:48 +00:00
signed_voluntary_exit : SomeSignedVoluntaryExit ,
2024-04-02 12:18:40 +00:00
flags : UpdateFlags , exit_queue_info : ExitQueueInfo ,
cache : var StateCache ) : Result [ ExitQueueInfo , cstring ] =
2022-05-23 23:39:08 +00:00
let exited_validator =
? check_voluntary_exit ( cfg , state , signed_voluntary_exit , flags )
2024-04-02 12:18:40 +00:00
ok ( ? initiate_validator_exit (
cfg , state , exited_validator , exit_queue_info , cache ) )
2020-09-24 17:05:49 +00:00
2023-01-19 22:00:40 +00:00
proc process_bls_to_execution_change * (
2024-02-26 02:38:21 +00:00
cfg : RuntimeConfig ,
state : var ( capella . BeaconState | deneb . BeaconState | electra . BeaconState ) ,
2023-01-19 22:00:40 +00:00
signed_address_change : SignedBLSToExecutionChange ) : Result [ void , cstring ] =
2023-02-17 13:35:12 +00:00
? check_bls_to_execution_change (
cfg . genesisFork , state , signed_address_change , { } )
2023-01-19 22:00:40 +00:00
let address_change = signed_address_change . message
var withdrawal_credentials =
state . validators . item ( address_change . validator_index ) . withdrawal_credentials
2022-11-07 18:37:48 +00:00
withdrawal_credentials . data [ 0 ] = ETH1_ADDRESS_WITHDRAWAL_PREFIX
withdrawal_credentials . data . fill ( 1 , 11 , 0 )
withdrawal_credentials . data [ 12 .. 31 ] =
address_change . to_execution_address . data
state . validators . mitem ( address_change . validator_index ) . withdrawal_credentials =
withdrawal_credentials
ok ( )
2024-04-16 18:09:39 +00:00
# https://github.com/ethereum/consensus-specs/blob/94a0b6c581f2809aa8aca4ef7ee6fbb63f9d74e9/specs/electra/beacon-chain.md#new-process_execution_layer_exit
2024-04-18 07:30:01 +00:00
func process_execution_layer_withdrawal_request (
2024-04-16 18:09:39 +00:00
cfg : RuntimeConfig , state : var electra . BeaconState ,
2024-04-18 07:30:01 +00:00
execution_layer_withdrawal_request : ExecutionLayerWithdrawalRequest ,
exit_queue_info : ExitQueueInfo , cache : var StateCache ) :
Result [ ExitQueueInfo , cstring ] =
2024-04-16 18:09:39 +00:00
# Verify pubkey exists
let
2024-04-18 07:30:01 +00:00
pubkey_to_exit = execution_layer_withdrawal_request . validator_pubkey
2024-04-16 18:09:39 +00:00
validator_index = findValidatorIndex ( state , pubkey_to_exit ) . valueOr :
2024-04-18 07:30:01 +00:00
return err ( " process_execution_layer_withdrawal_request: unknown index for validator pubkey " )
2024-04-16 18:09:39 +00:00
validator = state . validators . item ( validator_index )
# Verify withdrawal credentials
let
is_execution_address = validator . has_eth1_withdrawal_credential
is_correct_source_address =
validator . withdrawal_credentials . data . toOpenArray ( 12 , 31 ) = =
2024-04-18 07:30:01 +00:00
execution_layer_withdrawal_request . source_address . data
2024-04-16 18:09:39 +00:00
if not ( is_execution_address and is_correct_source_address ) :
2024-04-18 07:30:01 +00:00
return err ( " process_execution_layer_withdrawal_request: not both execution address and correct source address " )
2024-04-16 18:09:39 +00:00
# Verify the validator is active
if not is_active_validator ( validator , get_current_epoch ( state ) ) :
2024-04-18 07:30:01 +00:00
return err ( " process_execution_layer_withdrawal_request: not active validator " )
2024-04-16 18:09:39 +00:00
# Verify exit has not been initiated
if validator . exit_epoch ! = FAR_FUTURE_EPOCH :
2024-04-18 07:30:01 +00:00
return err ( " process_execution_layer_withdrawal_request: validator exit already initiated " )
2024-04-16 18:09:39 +00:00
# Verify the validator has been active long enough
if get_current_epoch ( state ) < validator . activation_epoch + cfg . SHARD_COMMITTEE_PERIOD :
2024-04-18 07:30:01 +00:00
return err ( " process_execution_layer_withdrawal_request: validator not active long enough " )
2024-04-16 18:09:39 +00:00
# Initiate exit
ok ( ? initiate_validator_exit (
cfg , state , validator_index , exit_queue_info , cache ) )
2024-04-28 09:15:03 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.5.0-alpha.0/specs/electra/beacon-chain.md#consolidations
proc process_consolidation * (
cfg : RuntimeConfig , state : var electra . BeaconState ,
signed_consolidation : SignedConsolidation | TrustedSignedConsolidation ,
cache : var StateCache ) : Result [ void , cstring ] =
# If the pending consolidations queue is full, no consolidations are allowed
# in the block
if not ( lenu64 ( state . pending_consolidations ) < PENDING_CONSOLIDATIONS_LIMIT ) :
return err ( " Consolidation: too many pending consolidations already " )
# If there is too little available consolidation churn limit, no
# consolidations are allowed in the block
if not ( get_consolidation_churn_limit ( cfg , state , cache ) >
static ( MIN_ACTIVATION_BALANCE . Gwei ) ) :
return err ( " Consolidation: insufficient available consolidation churn limit " )
let consolidation = signed_consolidation . message
# Verify that source != target, so a consolidation cannot be used as an exit.
if not ( consolidation . source_index ! = consolidation . target_index ) :
return err ( " Consolidation: a consolidation cannot be used as an exit " )
let
source_validator = addr state . validators . mitem ( consolidation . source_index )
target_validator = state . validators . item ( consolidation . target_index )
# Verify the source and the target are active
let current_epoch = get_current_epoch ( state )
if not is_active_validator ( source_validator [ ] , current_epoch ) :
return err ( " Consolidation: source validator not active " )
if not is_active_validator ( target_validator , current_epoch ) :
return err ( " Consolidation: target validator not active " )
# Verify exits for source and target have not been initiated
if not ( source_validator [ ] . exit_epoch = = FAR_FUTURE_EPOCH ) :
return err ( " Consolidation: exit for source validator already initiated " )
if not ( target_validator . exit_epoch = = FAR_FUTURE_EPOCH ) :
return err ( " Consolidation: exit for target validator already initiated " )
# Consolidations must specify an epoch when they become valid; they are not
# valid before then
if not ( current_epoch > = consolidation . epoch ) :
return err ( " Consolidation: consolidation not valid before specified epoch " )
# Verify the source and the target have Execution layer withdrawal credentials
if not has_execution_withdrawal_credential ( source_validator [ ] ) :
return err ( " Consolidation: source doesn ' t have execution layer withdrawal credentials " )
if not has_execution_withdrawal_credential ( target_validator ) :
return err ( " Consolidation: target doesn ' t have execution layer withdrawal credentials " )
# Verify the same withdrawal address
if not ( source_validator [ ] . withdrawal_credentials . data . toOpenArray ( 12 , 31 ) = =
target_validator . withdrawal_credentials . data . toOpenArray ( 12 , 31 ) ) :
return err ( " Consolidation: source and target don ' t have same withdrawal address " )
2024-05-14 11:51:06 +00:00
debugComment " this is per spec, near-verbatim, but Nimbus generally factors this out into spec/signatures.nim. so, create verify_consolidation_signature infra there, call here "
2024-04-28 09:15:03 +00:00
# Verify consolidation is signed by the source and the target
let
domain = compute_domain (
DOMAIN_CONSOLIDATION , cfg . GENESIS_FORK_VERSION ,
genesis_validators_root = state . genesis_validators_root )
signing_root = compute_signing_root ( consolidation , domain )
pubkeys = [ source_validator [ ] . pubkey , target_validator . pubkey ]
2024-05-14 11:51:06 +00:00
debugComment " as a good example, this trustedsig hack typically/should live in spec/signatures.nim "
2024-04-28 09:15:03 +00:00
when not ( signed_consolidation . signature is TrustedSig ) :
if not blsFastAggregateVerify (
pubkeys , signing_root . data , signed_consolidation . signature ) :
return err ( " Consolidation: invalid signature " )
# Initiate source validator exit and append pending consolidation
source_validator [ ] . exit_epoch = compute_consolidation_epoch_and_update_churn (
cfg , state , source_validator [ ] . effective_balance , cache )
source_validator [ ] . withdrawable_epoch =
source_validator [ ] . exit_epoch + cfg . MIN_VALIDATOR_WITHDRAWABILITY_DELAY
2024-05-14 11:51:06 +00:00
debugComment " check HashList add return value "
2024-04-28 09:15:03 +00:00
discard state . pending_consolidations . add ( PendingConsolidation (
source_index : consolidation . source_index ,
target_index : consolidation . target_index
) )
ok ( )
2024-03-04 17:00:46 +00:00
type
# https://ethereum.github.io/beacon-APIs/?urls.primaryName=v2.5.0#/Rewards/getBlockRewards
BlockRewards * = object
attestations * : Gwei
sync_aggregate * : Gwei
proposer_slashings * : Gwei
attester_slashings * : Gwei
2024-01-20 11:19:47 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.4.0-beta.6/specs/phase0/beacon-chain.md#operations
2023-12-05 02:34:45 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.4.0-beta.5/specs/capella/beacon-chain.md#modified-process_operations
2024-04-28 09:15:03 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.5.0-alpha.1/specs/electra/beacon-chain.md#modified-process_operations
proc process_operations (
cfg : RuntimeConfig , state : var ForkyBeaconState ,
body : SomeForkyBeaconBlockBody , base_reward_per_increment : Gwei ,
flags : UpdateFlags , cache : var StateCache ) : Result [ BlockRewards , cstring ] =
2020-05-22 15:52:07 +00:00
# Verify that outstanding deposits are processed up to the maximum number of
# deposits
2024-04-28 09:15:03 +00:00
when typeof ( body ) . kind > = ConsensusFork . Electra :
# Disable former deposit mechanism once all prior deposits are processed
let
eth1_deposit_index_limit =
min ( state . eth1_data . deposit_count , state . deposit_receipts_start_index )
req_deposits =
if state . eth1_deposit_index < eth1_deposit_index_limit :
min (
MAX_DEPOSITS , eth1_deposit_index_limit - state . eth1_deposit_index )
else :
0
else :
let req_deposits = min (
MAX_DEPOSITS , state . eth1_data . deposit_count - state . eth1_deposit_index )
2021-07-06 06:19:06 +00:00
2020-08-21 13:34:14 +00:00
if state . eth1_data . deposit_count < state . eth1_deposit_index or
body . deposits . lenu64 ! = req_deposits :
2020-07-03 17:03:14 +00:00
return err ( " incorrect number of deposits " )
2020-05-22 15:52:07 +00:00
2024-03-04 17:00:46 +00:00
var operations_rewards : BlockRewards
2024-04-02 12:18:40 +00:00
# It costs a full validator set scan to construct these values; only do so if
# there will be some kind of exit.
var exit_queue_info =
if body . proposer_slashings . len + body . attester_slashings . len +
body . voluntary_exits . len > 0 :
2024-04-03 01:45:57 +00:00
get_state_exit_queue_info ( state )
2024-04-02 12:18:40 +00:00
else :
default ( ExitQueueInfo ) # not used
Implement split preset/config support (#2710)
* Implement split preset/config support
This is the initial bulk refactor to introduce runtime config values in
a number of places, somewhat replacing the existing mechanism of loading
network metadata.
It still needs more work, this is the initial refactor that introduces
runtime configuration in some of the places that need it.
The PR changes the way presets and constants work, to match the spec. In
particular, a "preset" now refers to the compile-time configuration
while a "cfg" or "RuntimeConfig" is the dynamic part.
A single binary can support either mainnet or minimal, but not both.
Support for other presets has been removed completely (can be readded,
in case there's need).
There's a number of outstanding tasks:
* `SECONDS_PER_SLOT` still needs fixing
* loading custom runtime configs needs redoing
* checking constants against YAML file
* yeerongpilly support
`build/nimbus_beacon_node --network=yeerongpilly --discv5:no --log-level=DEBUG`
* load fork epoch from config
* fix fork digest sent in status
* nicer error string for request failures
* fix tools
* one more
* fixup
* fixup
* fixup
* use "standard" network definition folder in local testnet
Files are loaded from their standard locations, including genesis etc,
to conform to the format used in the `eth2-networks` repo.
* fix launch scripts, allow unknown config values
* fix base config of rest test
* cleanups
* bundle mainnet config using common loader
* fix spec links and names
* only include supported preset in binary
* drop yeerongpilly, add altair-devnet-0, support boot_enr.yaml
2021-07-12 13:01:38 +00:00
for op in body . proposer_slashings :
2024-04-02 12:18:40 +00:00
let ( proposer_slashing_reward , new_exit_queue_info ) =
? process_proposer_slashing ( cfg , state , op , flags , exit_queue_info , cache )
operations_rewards . proposer_slashings + = proposer_slashing_reward
exit_queue_info = new_exit_queue_info
Implement split preset/config support (#2710)
* Implement split preset/config support
This is the initial bulk refactor to introduce runtime config values in
a number of places, somewhat replacing the existing mechanism of loading
network metadata.
It still needs more work, this is the initial refactor that introduces
runtime configuration in some of the places that need it.
The PR changes the way presets and constants work, to match the spec. In
particular, a "preset" now refers to the compile-time configuration
while a "cfg" or "RuntimeConfig" is the dynamic part.
A single binary can support either mainnet or minimal, but not both.
Support for other presets has been removed completely (can be readded,
in case there's need).
There's a number of outstanding tasks:
* `SECONDS_PER_SLOT` still needs fixing
* loading custom runtime configs needs redoing
* checking constants against YAML file
* yeerongpilly support
`build/nimbus_beacon_node --network=yeerongpilly --discv5:no --log-level=DEBUG`
* load fork epoch from config
* fix fork digest sent in status
* nicer error string for request failures
* fix tools
* one more
* fixup
* fixup
* fixup
* use "standard" network definition folder in local testnet
Files are loaded from their standard locations, including genesis etc,
to conform to the format used in the `eth2-networks` repo.
* fix launch scripts, allow unknown config values
* fix base config of rest test
* cleanups
* bundle mainnet config using common loader
* fix spec links and names
* only include supported preset in binary
* drop yeerongpilly, add altair-devnet-0, support boot_enr.yaml
2021-07-12 13:01:38 +00:00
for op in body . attester_slashings :
2024-04-28 09:15:03 +00:00
let ( attester_slashing_reward , new_exit_queue_info ) =
? process_attester_slashing ( cfg , state , op , flags , exit_queue_info , cache )
operations_rewards . attester_slashings + = attester_slashing_reward
exit_queue_info = new_exit_queue_info
Implement split preset/config support (#2710)
* Implement split preset/config support
This is the initial bulk refactor to introduce runtime config values in
a number of places, somewhat replacing the existing mechanism of loading
network metadata.
It still needs more work, this is the initial refactor that introduces
runtime configuration in some of the places that need it.
The PR changes the way presets and constants work, to match the spec. In
particular, a "preset" now refers to the compile-time configuration
while a "cfg" or "RuntimeConfig" is the dynamic part.
A single binary can support either mainnet or minimal, but not both.
Support for other presets has been removed completely (can be readded,
in case there's need).
There's a number of outstanding tasks:
* `SECONDS_PER_SLOT` still needs fixing
* loading custom runtime configs needs redoing
* checking constants against YAML file
* yeerongpilly support
`build/nimbus_beacon_node --network=yeerongpilly --discv5:no --log-level=DEBUG`
* load fork epoch from config
* fix fork digest sent in status
* nicer error string for request failures
* fix tools
* one more
* fixup
* fixup
* fixup
* use "standard" network definition folder in local testnet
Files are loaded from their standard locations, including genesis etc,
to conform to the format used in the `eth2-networks` repo.
* fix launch scripts, allow unknown config values
* fix base config of rest test
* cleanups
* bundle mainnet config using common loader
* fix spec links and names
* only include supported preset in binary
* drop yeerongpilly, add altair-devnet-0, support boot_enr.yaml
2021-07-12 13:01:38 +00:00
for op in body . attestations :
2024-03-04 17:00:46 +00:00
operations_rewards . attestations + =
? process_attestation ( state , op , flags , base_reward_per_increment , cache )
2024-03-07 23:38:24 +00:00
if body . deposits . len > 0 :
let bloom_filter = constructBloomFilter ( state . validators . asSeq )
for op in body . deposits :
? process_deposit ( cfg , state , bloom_filter [ ] , op , flags )
Implement split preset/config support (#2710)
* Implement split preset/config support
This is the initial bulk refactor to introduce runtime config values in
a number of places, somewhat replacing the existing mechanism of loading
network metadata.
It still needs more work, this is the initial refactor that introduces
runtime configuration in some of the places that need it.
The PR changes the way presets and constants work, to match the spec. In
particular, a "preset" now refers to the compile-time configuration
while a "cfg" or "RuntimeConfig" is the dynamic part.
A single binary can support either mainnet or minimal, but not both.
Support for other presets has been removed completely (can be readded,
in case there's need).
There's a number of outstanding tasks:
* `SECONDS_PER_SLOT` still needs fixing
* loading custom runtime configs needs redoing
* checking constants against YAML file
* yeerongpilly support
`build/nimbus_beacon_node --network=yeerongpilly --discv5:no --log-level=DEBUG`
* load fork epoch from config
* fix fork digest sent in status
* nicer error string for request failures
* fix tools
* one more
* fixup
* fixup
* fixup
* use "standard" network definition folder in local testnet
Files are loaded from their standard locations, including genesis etc,
to conform to the format used in the `eth2-networks` repo.
* fix launch scripts, allow unknown config values
* fix base config of rest test
* cleanups
* bundle mainnet config using common loader
* fix spec links and names
* only include supported preset in binary
* drop yeerongpilly, add altair-devnet-0, support boot_enr.yaml
2021-07-12 13:01:38 +00:00
for op in body . voluntary_exits :
2024-04-02 12:18:40 +00:00
exit_queue_info = ? process_voluntary_exit (
cfg , state , op , flags , exit_queue_info , cache )
2023-09-27 15:10:28 +00:00
when typeof ( body ) . kind > = ConsensusFork . Capella :
2023-05-09 17:24:02 +00:00
for op in body . bls_to_execution_changes :
? process_bls_to_execution_change ( cfg , state , op )
2020-05-22 15:52:07 +00:00
2024-04-28 09:15:03 +00:00
# [New in Electra:EIP7002:EIP7251]
when typeof ( body ) . kind > = ConsensusFork . Electra :
for op in body . execution_payload . withdrawal_requests :
discard ? process_execution_layer_withdrawal_request (
cfg , state , op , default ( ExitQueueInfo ) , cache )
for op in body . execution_payload . deposit_receipts :
2024-05-14 11:51:06 +00:00
debugComment " combine with previous bloom filter construction "
2024-04-28 09:15:03 +00:00
let bloom_filter = constructBloomFilter ( state . validators . asSeq )
? process_deposit_receipt ( cfg , state , bloom_filter [ ] , op , { } )
for op in body . consolidations :
? process_consolidation ( cfg , state , op , cache )
2024-03-04 17:00:46 +00:00
ok ( operations_rewards )
2019-09-10 00:14:03 +00:00
2024-03-14 06:26:36 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.4.0/specs/altair/beacon-chain.md#sync-aggregate-processing
2021-12-29 02:50:49 +00:00
func get_participant_reward * ( total_active_balance : Gwei ) : Gwei =
let
total_active_increments =
2024-03-19 13:22:07 +00:00
total_active_balance div EFFECTIVE_BALANCE_INCREMENT . Gwei
2021-12-29 02:50:49 +00:00
total_base_rewards =
2023-05-09 18:16:49 +00:00
get_base_reward_per_increment ( total_active_balance ) *
total_active_increments
2021-12-29 02:50:49 +00:00
max_participant_rewards =
2023-05-09 18:16:49 +00:00
total_base_rewards * SYNC_REWARD_WEIGHT div
WEIGHT_DENOMINATOR div SLOTS_PER_EPOCH
2022-01-17 12:58:33 +00:00
max_participant_rewards div SYNC_COMMITTEE_SIZE
2021-12-29 02:50:49 +00:00
2024-03-14 06:26:36 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.4.0/specs/altair/beacon-chain.md#sync-aggregate-processing
2021-12-29 02:50:49 +00:00
func get_proposer_reward * ( participant_reward : Gwei ) : Gwei =
participant_reward * PROPOSER_WEIGHT div ( WEIGHT_DENOMINATOR - PROPOSER_WEIGHT )
2024-03-14 06:26:36 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.4.0/specs/altair/beacon-chain.md#sync-aggregate-processing
2021-06-14 17:42:46 +00:00
proc process_sync_aggregate * (
2022-12-06 12:40:13 +00:00
state : var ( altair . BeaconState | bellatrix . BeaconState |
2024-02-26 02:38:21 +00:00
capella . BeaconState | deneb . BeaconState | electra . BeaconState ) ,
2022-01-13 13:46:08 +00:00
sync_aggregate : SomeSyncAggregate , total_active_balance : Gwei ,
2024-03-04 17:00:46 +00:00
flags : UpdateFlags , cache : var StateCache ) : Result [ Gwei , cstring ] =
2023-06-17 06:00:01 +00:00
if strictVerification in flags and state . slot > 1 . Slot :
template sync_committee_bits ( ) : auto = sync_aggregate . sync_committee_bits
let num_active_participants = countOnes ( sync_committee_bits ) . uint64
if num_active_participants * 3 < static ( sync_committee_bits . len * 2 ) :
fatal " Low sync committee participation " ,
slot = state . slot , num_active_participants
quit 1
2021-05-28 15:25:58 +00:00
# Verify sync committee aggregate signature signing over the previous slot
# block root
2022-01-13 13:46:08 +00:00
when sync_aggregate . sync_committee_signature isnot TrustedSig :
speed up epoch processing 6x+ (#3089)
* speed up epoch processing 6x+
This change above all helps contain long replay times on epoch change, reorg
and deep history inspection via REST/RPC
* most effective balances don't actually change due to MAX_EFFECTIVE_BALANCE
* ditto for inactivity scores
* avoid signature check for trusted sync aggregates
pre:
```
./ncli_db --db:mainnet_0/db bench --start-slot=-3200
All time are ms
Average, StdDev, Min, Max, Samples, Test
Validation is turned off meaning that no BLS operations are performed
3468.621, 0.000, 3468.621, 3468.621, 1, Initialize DB
0.357, 0.938, 0.171, 52.752, 3155, Load block from database
15691.471, 0.000, 15691.471, 15691.471, 1, Load state from database
6.100, 9.469, 0.033, 526.816, 3101, Advance slot, non-epoch
579.131, 9.523, 566.936, 610.328, 100, Advance slot, epoch
18.551, 16.317, 12.664, 136.668, 3155, Apply block, no slot processing
0.000, 0.000, 0.000, 0.000, 0, Database load
0.000, 0.000, 0.000, 0.000, 0, Database store
```
post:
```
Average, StdDev, Min, Max, Samples, Test
Validation is turned off meaning that no BLS operations are performed
3488.541, 0.000, 3488.541, 3488.541, 1, Initialize DB
0.369, 1.123, 0.183, 63.208, 3155, Load block from database
13430.642, 0.000, 13430.642, 13430.642, 1, Load state from database
6.522, 1.721, 0.034, 36.708, 3101, Advance slot, non-epoch
89.074, 3.162, 83.573, 101.436, 100, Advance slot, epoch
18.325, 18.346, 13.005, 145.040, 3155, Apply block, no slot processing
0.000, 0.000, 0.000, 0.000, 0, Database load
0.000, 0.000, 0.000, 0.000, 0, Database store
```
* Update beacon_chain/spec/state_transition_block.nim
Co-authored-by: zah <zahary@gmail.com>
* avoid copying validator data in accessor
```
5291.227, 0.000, 5291.227, 5291.227, 1, Initialize DB
0.436, 0.928, 0.138, 51.438, 3155, Load block from database
11962.826, 0.000, 11962.826, 11962.826, 1, Load state from database
6.477, 1.675, 0.037, 34.174, 3101, Advance slot, non-epoch
76.633, 3.705, 71.106, 98.085, 100, Advance slot, epoch
18.301, 18.593, 13.208, 149.153, 3155, Apply block, no slot processing
0.000, 0.000, 0.000, 0.000, 0, Database load
0.000, 0.000, 0.000, 0.000, 0, Database store
```
* work around compiler bug
Co-authored-by: zah <zahary@gmail.com>
2021-11-11 19:24:29 +00:00
var participant_pubkeys : seq [ ValidatorPubKey ]
Speed up altair block processing 2x (#3115)
* Speed up altair block processing >2x
Like #3089, this PR drastially speeds up historical REST queries and
other long state replays.
* cache sync committee validator indices
* use ~80mb less memory for validator pubkey mappings
* batch-verify sync aggregate signature (fixes #2985)
* document sync committee hack with head block vs sync message block
* add batch signature verification failure tests
Before:
```
../env.sh nim c -d:release -r ncli_db --db:mainnet_0/db bench --start-slot:-1000
All time are ms
Average, StdDev, Min, Max, Samples, Test
Validation is turned off meaning that no BLS operations are performed
5830.675, 0.000, 5830.675, 5830.675, 1, Initialize DB
0.481, 1.878, 0.215, 59.167, 981, Load block from database
8422.566, 0.000, 8422.566, 8422.566, 1, Load state from database
6.996, 1.678, 0.042, 14.385, 969, Advance slot, non-epoch
93.217, 8.318, 84.192, 122.209, 32, Advance slot, epoch
20.513, 23.665, 11.510, 201.561, 981, Apply block, no slot processing
0.000, 0.000, 0.000, 0.000, 0, Database load
0.000, 0.000, 0.000, 0.000, 0, Database store
```
After:
```
7081.422, 0.000, 7081.422, 7081.422, 1, Initialize DB
0.553, 2.122, 0.175, 66.692, 981, Load block from database
5439.446, 0.000, 5439.446, 5439.446, 1, Load state from database
6.829, 1.575, 0.043, 12.156, 969, Advance slot, non-epoch
94.716, 2.749, 88.395, 100.026, 32, Advance slot, epoch
11.636, 23.766, 4.889, 205.250, 981, Apply block, no slot processing
0.000, 0.000, 0.000, 0.000, 0, Database load
0.000, 0.000, 0.000, 0.000, 0, Database store
```
* add comment
2021-11-24 12:43:50 +00:00
for i in 0 .. < state . current_sync_committee . pubkeys . len :
2022-01-13 13:46:08 +00:00
if sync_aggregate . sync_committee_bits [ i ] :
2022-05-30 13:30:42 +00:00
participant_pubkeys . add state . current_sync_committee . pubkeys . data [ i ]
2021-05-28 15:25:58 +00:00
Speed up altair block processing 2x (#3115)
* Speed up altair block processing >2x
Like #3089, this PR drastially speeds up historical REST queries and
other long state replays.
* cache sync committee validator indices
* use ~80mb less memory for validator pubkey mappings
* batch-verify sync aggregate signature (fixes #2985)
* document sync committee hack with head block vs sync message block
* add batch signature verification failure tests
Before:
```
../env.sh nim c -d:release -r ncli_db --db:mainnet_0/db bench --start-slot:-1000
All time are ms
Average, StdDev, Min, Max, Samples, Test
Validation is turned off meaning that no BLS operations are performed
5830.675, 0.000, 5830.675, 5830.675, 1, Initialize DB
0.481, 1.878, 0.215, 59.167, 981, Load block from database
8422.566, 0.000, 8422.566, 8422.566, 1, Load state from database
6.996, 1.678, 0.042, 14.385, 969, Advance slot, non-epoch
93.217, 8.318, 84.192, 122.209, 32, Advance slot, epoch
20.513, 23.665, 11.510, 201.561, 981, Apply block, no slot processing
0.000, 0.000, 0.000, 0.000, 0, Database load
0.000, 0.000, 0.000, 0.000, 0, Database store
```
After:
```
7081.422, 0.000, 7081.422, 7081.422, 1, Initialize DB
0.553, 2.122, 0.175, 66.692, 981, Load block from database
5439.446, 0.000, 5439.446, 5439.446, 1, Load state from database
6.829, 1.575, 0.043, 12.156, 969, Advance slot, non-epoch
94.716, 2.749, 88.395, 100.026, 32, Advance slot, epoch
11.636, 23.766, 4.889, 205.250, 981, Apply block, no slot processing
0.000, 0.000, 0.000, 0.000, 0, Database load
0.000, 0.000, 0.000, 0.000, 0, Database store
```
* add comment
2021-11-24 12:43:50 +00:00
# p2p-interface message validators check for empty sync committees, so it
# shouldn't run except as part of test suite.
2021-12-09 12:56:54 +00:00
if participant_pubkeys . len = = 0 :
2022-01-13 13:46:08 +00:00
if sync_aggregate . sync_committee_signature ! = ValidatorSig . infinity ( ) :
2021-12-09 12:56:54 +00:00
return err ( " process_sync_aggregate: empty sync aggregates need signature of point at infinity " )
else :
# Empty participants allowed
let
previous_slot = max ( state . slot , Slot ( 1 ) ) - 1
beacon_block_root = get_block_root_at_slot ( state , previous_slot )
if not verify_sync_committee_signature (
state . fork , state . genesis_validators_root , previous_slot ,
beacon_block_root , participant_pubkeys ,
2022-01-13 13:46:08 +00:00
sync_aggregate . sync_committee_signature ) :
2021-12-09 12:56:54 +00:00
return err ( " process_sync_aggregate: invalid signature " )
2021-05-28 15:25:58 +00:00
# Compute participant and proposer rewards
let
2021-12-29 02:50:49 +00:00
participant_reward = get_participant_reward ( total_active_balance )
proposer_reward = state_transition_block . get_proposer_reward ( participant_reward )
2023-01-11 12:29:21 +00:00
proposer_index = get_beacon_proposer_index ( state , cache ) . valueOr :
# We're processing a block, so this can't happen, in theory (!)
return err ( " process_sync_aggregate: no proposer " )
2021-05-28 15:25:58 +00:00
# Apply participant and proposer rewards
Speed up altair block processing 2x (#3115)
* Speed up altair block processing >2x
Like #3089, this PR drastially speeds up historical REST queries and
other long state replays.
* cache sync committee validator indices
* use ~80mb less memory for validator pubkey mappings
* batch-verify sync aggregate signature (fixes #2985)
* document sync committee hack with head block vs sync message block
* add batch signature verification failure tests
Before:
```
../env.sh nim c -d:release -r ncli_db --db:mainnet_0/db bench --start-slot:-1000
All time are ms
Average, StdDev, Min, Max, Samples, Test
Validation is turned off meaning that no BLS operations are performed
5830.675, 0.000, 5830.675, 5830.675, 1, Initialize DB
0.481, 1.878, 0.215, 59.167, 981, Load block from database
8422.566, 0.000, 8422.566, 8422.566, 1, Load state from database
6.996, 1.678, 0.042, 14.385, 969, Advance slot, non-epoch
93.217, 8.318, 84.192, 122.209, 32, Advance slot, epoch
20.513, 23.665, 11.510, 201.561, 981, Apply block, no slot processing
0.000, 0.000, 0.000, 0.000, 0, Database load
0.000, 0.000, 0.000, 0.000, 0, Database store
```
After:
```
7081.422, 0.000, 7081.422, 7081.422, 1, Initialize DB
0.553, 2.122, 0.175, 66.692, 981, Load block from database
5439.446, 0.000, 5439.446, 5439.446, 1, Load state from database
6.829, 1.575, 0.043, 12.156, 969, Advance slot, non-epoch
94.716, 2.749, 88.395, 100.026, 32, Advance slot, epoch
11.636, 23.766, 4.889, 205.250, 981, Apply block, no slot processing
0.000, 0.000, 0.000, 0.000, 0, Database load
0.000, 0.000, 0.000, 0.000, 0, Database store
```
* add comment
2021-11-24 12:43:50 +00:00
let indices = get_sync_committee_cache ( state , cache ) . current_sync_committee
2021-05-28 15:25:58 +00:00
2021-06-14 17:42:46 +00:00
for i in 0 .. < min (
2021-10-13 14:24:36 +00:00
state . current_sync_committee . pubkeys . len ,
2022-01-13 13:46:08 +00:00
sync_aggregate . sync_committee_bits . len ) :
Speed up altair block processing 2x (#3115)
* Speed up altair block processing >2x
Like #3089, this PR drastially speeds up historical REST queries and
other long state replays.
* cache sync committee validator indices
* use ~80mb less memory for validator pubkey mappings
* batch-verify sync aggregate signature (fixes #2985)
* document sync committee hack with head block vs sync message block
* add batch signature verification failure tests
Before:
```
../env.sh nim c -d:release -r ncli_db --db:mainnet_0/db bench --start-slot:-1000
All time are ms
Average, StdDev, Min, Max, Samples, Test
Validation is turned off meaning that no BLS operations are performed
5830.675, 0.000, 5830.675, 5830.675, 1, Initialize DB
0.481, 1.878, 0.215, 59.167, 981, Load block from database
8422.566, 0.000, 8422.566, 8422.566, 1, Load state from database
6.996, 1.678, 0.042, 14.385, 969, Advance slot, non-epoch
93.217, 8.318, 84.192, 122.209, 32, Advance slot, epoch
20.513, 23.665, 11.510, 201.561, 981, Apply block, no slot processing
0.000, 0.000, 0.000, 0.000, 0, Database load
0.000, 0.000, 0.000, 0.000, 0, Database store
```
After:
```
7081.422, 0.000, 7081.422, 7081.422, 1, Initialize DB
0.553, 2.122, 0.175, 66.692, 981, Load block from database
5439.446, 0.000, 5439.446, 5439.446, 1, Load state from database
6.829, 1.575, 0.043, 12.156, 969, Advance slot, non-epoch
94.716, 2.749, 88.395, 100.026, 32, Advance slot, epoch
11.636, 23.766, 4.889, 205.250, 981, Apply block, no slot processing
0.000, 0.000, 0.000, 0.000, 0, Database load
0.000, 0.000, 0.000, 0.000, 0, Database store
```
* add comment
2021-11-24 12:43:50 +00:00
let participant_index = indices [ i ]
2022-01-13 13:46:08 +00:00
if sync_aggregate . sync_committee_bits [ i ] :
2021-10-13 14:24:36 +00:00
increase_balance ( state , participant_index , participant_reward )
2023-01-11 12:29:21 +00:00
increase_balance ( state , proposer_index , proposer_reward )
2021-05-28 15:25:58 +00:00
else :
2021-10-13 14:24:36 +00:00
decrease_balance ( state , participant_index , participant_reward )
2021-05-28 15:25:58 +00:00
2024-03-04 17:00:46 +00:00
ok ( proposer_reward )
2021-05-28 15:25:58 +00:00
2023-04-21 18:52:43 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.3.0/specs/bellatrix/beacon-chain.md#process_execution_payload
2021-09-27 14:22:58 +00:00
proc process_execution_payload * (
2022-10-27 06:29:24 +00:00
state : var bellatrix . BeaconState , payload : bellatrix . ExecutionPayload ,
notify_new_payload : bellatrix . ExecutePayload ) : Result [ void , cstring ] =
2023-05-25 07:55:00 +00:00
# Verify consistency of the parent hash with respect to the previous
# execution payload header
2021-12-14 21:02:29 +00:00
if is_merge_transition_complete ( state ) :
2021-09-27 14:22:58 +00:00
if not ( payload . parent_hash = =
state . latest_execution_payload_header . block_hash ) :
return err ( " process_execution_payload: payload and state parent hash mismatch " )
2022-03-03 16:08:14 +00:00
# Verify prev_randao
if not ( payload . prev_randao = = get_randao_mix ( state , get_current_epoch ( state ) ) ) :
2021-09-27 14:22:58 +00:00
return err ( " process_execution_payload: payload and state randomness mismatch " )
# Verify timestamp
if not ( payload . timestamp = = compute_timestamp_at_slot ( state , state . slot ) ) :
return err ( " process_execution_payload: invalid timestamp " )
# Verify the execution payload is valid
2022-02-01 07:31:53 +00:00
if not notify_new_payload ( payload ) :
2021-09-27 14:22:58 +00:00
return err ( " process_execution_payload: execution payload invalid " )
# Cache execution payload header
2022-10-27 06:29:24 +00:00
state . latest_execution_payload_header = bellatrix . ExecutionPayloadHeader (
2021-09-27 14:22:58 +00:00
parent_hash : payload . parent_hash ,
2022-01-03 12:22:56 +00:00
fee_recipient : payload . fee_recipient ,
2021-09-27 14:22:58 +00:00
state_root : payload . state_root ,
2021-12-09 11:18:38 +00:00
receipts_root : payload . receipts_root ,
2021-09-27 14:22:58 +00:00
logs_bloom : payload . logs_bloom ,
2022-03-03 16:08:14 +00:00
prev_randao : payload . prev_randao ,
2021-09-27 14:22:58 +00:00
block_number : payload . block_number ,
gas_limit : payload . gas_limit ,
gas_used : payload . gas_used ,
timestamp : payload . timestamp ,
base_fee_per_gas : payload . base_fee_per_gas ,
block_hash : payload . block_hash ,
2022-01-03 12:22:56 +00:00
extra_data : payload . extra_data ,
2021-09-27 14:22:58 +00:00
transactions_root : hash_tree_root ( payload . transactions ) )
ok ( )
2023-05-09 18:16:49 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.3.0/specs/capella/beacon-chain.md#modified-process_execution_payload
2022-10-27 06:29:24 +00:00
proc process_execution_payload * (
state : var capella . BeaconState , payload : capella . ExecutionPayload ,
notify_new_payload : capella . ExecutePayload ) : Result [ void , cstring ] =
2023-05-09 18:16:49 +00:00
# Verify consistency of the parent hash with respect to the previous
# execution payload header
2023-05-25 07:55:00 +00:00
if not ( payload . parent_hash = =
state . latest_execution_payload_header . block_hash ) :
return err ( " process_execution_payload: payload and state parent hash mismatch " )
2022-10-27 06:29:24 +00:00
# Verify prev_randao
if not ( payload . prev_randao = = get_randao_mix ( state , get_current_epoch ( state ) ) ) :
return err ( " process_execution_payload: payload and state randomness mismatch " )
# Verify timestamp
if not ( payload . timestamp = = compute_timestamp_at_slot ( state , state . slot ) ) :
return err ( " process_execution_payload: invalid timestamp " )
# Verify the execution payload is valid
if not notify_new_payload ( payload ) :
return err ( " process_execution_payload: execution payload invalid " )
# Cache execution payload header
state . latest_execution_payload_header = capella . ExecutionPayloadHeader (
parent_hash : payload . parent_hash ,
fee_recipient : payload . fee_recipient ,
state_root : payload . state_root ,
receipts_root : payload . receipts_root ,
logs_bloom : payload . logs_bloom ,
prev_randao : payload . prev_randao ,
block_number : payload . block_number ,
gas_limit : payload . gas_limit ,
gas_used : payload . gas_used ,
timestamp : payload . timestamp ,
base_fee_per_gas : payload . base_fee_per_gas ,
block_hash : payload . block_hash ,
extra_data : payload . extra_data ,
transactions_root : hash_tree_root ( payload . transactions ) ,
withdrawals_root : hash_tree_root ( payload . withdrawals ) ) # [New in Capella]
ok ( )
2023-05-25 07:55:00 +00:00
# TODO workaround for https://github.com/nim-lang/Nim/issues/18095
# copy of datatypes/deneb.nim
type SomeDenebBeaconBlockBody =
deneb . BeaconBlockBody | deneb . SigVerifiedBeaconBlockBody |
deneb . TrustedBeaconBlockBody
2023-05-09 18:16:49 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.3.0/specs/deneb/beacon-chain.md#process_execution_payload
2022-12-06 12:40:13 +00:00
proc process_execution_payload * (
2023-05-25 07:55:00 +00:00
state : var deneb . BeaconState , body : SomeDenebBeaconBlockBody ,
2023-02-22 13:10:00 +00:00
notify_new_payload : deneb . ExecutePayload ) : Result [ void , cstring ] =
2023-05-25 07:55:00 +00:00
template payload : auto = body . execution_payload
2023-05-09 18:16:49 +00:00
# Verify consistency of the parent hash with respect to the previous
# execution payload header
2023-05-25 07:55:00 +00:00
if not ( payload . parent_hash = =
state . latest_execution_payload_header . block_hash ) :
return err ( " process_execution_payload: payload and state parent hash mismatch " )
2022-12-06 12:40:13 +00:00
# Verify prev_randao
if not ( payload . prev_randao = = get_randao_mix ( state , get_current_epoch ( state ) ) ) :
return err ( " process_execution_payload: payload and state randomness mismatch " )
# Verify timestamp
if not ( payload . timestamp = = compute_timestamp_at_slot ( state , state . slot ) ) :
return err ( " process_execution_payload: invalid timestamp " )
2023-05-25 07:55:00 +00:00
# [New in Deneb] Verify commitments are under limit
if not ( lenu64 ( body . blob_kzg_commitments ) < = MAX_BLOBS_PER_BLOCK ) :
return err ( " process_execution_payload: too many KZG commitments " )
2022-12-06 12:40:13 +00:00
# Verify the execution payload is valid
if not notify_new_payload ( payload ) :
return err ( " process_execution_payload: execution payload invalid " )
# Cache execution payload header
2023-02-22 13:10:00 +00:00
state . latest_execution_payload_header = deneb . ExecutionPayloadHeader (
2022-12-06 12:40:13 +00:00
parent_hash : payload . parent_hash ,
fee_recipient : payload . fee_recipient ,
state_root : payload . state_root ,
receipts_root : payload . receipts_root ,
logs_bloom : payload . logs_bloom ,
prev_randao : payload . prev_randao ,
block_number : payload . block_number ,
gas_limit : payload . gas_limit ,
gas_used : payload . gas_used ,
timestamp : payload . timestamp ,
base_fee_per_gas : payload . base_fee_per_gas ,
block_hash : payload . block_hash ,
extra_data : payload . extra_data ,
transactions_root : hash_tree_root ( payload . transactions ) ,
2023-03-11 00:28:19 +00:00
withdrawals_root : hash_tree_root ( payload . withdrawals ) ,
2023-08-02 22:07:57 +00:00
blob_gas_used : payload . blob_gas_used , # [New in Deneb]
excess_blob_gas : payload . excess_blob_gas ) # [New in Deneb]
2022-12-06 12:40:13 +00:00
ok ( )
2024-02-26 02:38:21 +00:00
# TODO workaround for https://github.com/nim-lang/Nim/issues/18095
# copy of datatypes/electra.nim
type SomeElectraBeaconBlockBody =
electra . BeaconBlockBody | electra . SigVerifiedBeaconBlockBody |
electra . TrustedBeaconBlockBody
2024-04-26 16:02:15 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.5.0-alpha.0/specs/electra/beacon-chain.md#modified-process_execution_payload
2024-02-26 02:38:21 +00:00
proc process_execution_payload * (
state : var electra . BeaconState , body : SomeElectraBeaconBlockBody ,
notify_new_payload : electra . ExecutePayload ) : Result [ void , cstring ] =
template payload : auto = body . execution_payload
# Verify consistency of the parent hash with respect to the previous
# execution payload header
if not ( payload . parent_hash = =
state . latest_execution_payload_header . block_hash ) :
return err ( " process_execution_payload: payload and state parent hash mismatch " )
# Verify prev_randao
if not ( payload . prev_randao = = get_randao_mix ( state , get_current_epoch ( state ) ) ) :
return err ( " process_execution_payload: payload and state randomness mismatch " )
# Verify timestamp
if not ( payload . timestamp = = compute_timestamp_at_slot ( state , state . slot ) ) :
return err ( " process_execution_payload: invalid timestamp " )
# [New in Deneb] Verify commitments are under limit
if not ( lenu64 ( body . blob_kzg_commitments ) < = MAX_BLOBS_PER_BLOCK ) :
return err ( " process_execution_payload: too many KZG commitments " )
# Verify the execution payload is valid
if not notify_new_payload ( payload ) :
return err ( " process_execution_payload: execution payload invalid " )
# Cache execution payload header
state . latest_execution_payload_header = electra . ExecutionPayloadHeader (
parent_hash : payload . parent_hash ,
fee_recipient : payload . fee_recipient ,
state_root : payload . state_root ,
receipts_root : payload . receipts_root ,
logs_bloom : payload . logs_bloom ,
prev_randao : payload . prev_randao ,
block_number : payload . block_number ,
gas_limit : payload . gas_limit ,
gas_used : payload . gas_used ,
timestamp : payload . timestamp ,
base_fee_per_gas : payload . base_fee_per_gas ,
block_hash : payload . block_hash ,
extra_data : payload . extra_data ,
transactions_root : hash_tree_root ( payload . transactions ) ,
withdrawals_root : hash_tree_root ( payload . withdrawals ) ,
blob_gas_used : payload . blob_gas_used ,
2024-04-26 16:02:15 +00:00
excess_blob_gas : payload . excess_blob_gas ,
deposit_receipts_root :
hash_tree_root ( payload . deposit_receipts ) , # [New in Electra:EIP6110]
withdrawal_requests_root :
hash_tree_root ( payload . withdrawal_requests ) ) # [New in Electra:EIP7002:EIP7251]
2024-02-26 02:38:21 +00:00
ok ( )
2024-05-09 05:03:10 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.5.0-alpha.2/specs/capella/beacon-chain.md#new-process_withdrawals
2022-10-27 06:29:24 +00:00
func process_withdrawals * (
2024-02-26 02:38:21 +00:00
state : var ( capella . BeaconState | deneb . BeaconState | electra . BeaconState ) ,
payload : capella . ExecutionPayload | deneb . ExecutionPayload |
electra . ExecutionPayload ) :
2022-10-27 06:29:24 +00:00
Result [ void , cstring ] =
2022-11-21 07:44:49 +00:00
let expected_withdrawals = get_expected_withdrawals ( state )
if not ( len ( payload . withdrawals ) = = len ( expected_withdrawals ) ) :
return err ( " process_withdrawals: different numbers of payload and expected withdrawals " )
for i in 0 .. < len ( expected_withdrawals ) :
if expected_withdrawals [ i ] ! = payload . withdrawals [ i ] :
return err ( " process_withdrawals: mismatched expected and payload withdrawal " )
let validator_index =
ValidatorIndex . init ( expected_withdrawals [ i ] . validator_index ) . valueOr :
return err ( " process_withdrawals: invalid validator index " )
decrease_balance (
state , validator_index , expected_withdrawals [ i ] . amount )
2022-12-15 01:51:06 +00:00
# Update the next withdrawal index if this block contained withdrawals
if len ( expected_withdrawals ) ! = 0 :
2022-11-21 07:44:49 +00:00
let latest_withdrawal = expected_withdrawals [ ^ 1 ]
state . next_withdrawal_index = WithdrawalIndex ( latest_withdrawal . index + 1 )
2022-12-15 01:51:06 +00:00
# Update the next validator index to start the next withdrawal sweep
if len ( expected_withdrawals ) = = MAX_WITHDRAWALS_PER_PAYLOAD :
# Next sweep starts after the latest withdrawal's validator index
2022-11-21 07:44:49 +00:00
let next_validator_index =
2022-12-15 01:51:06 +00:00
( expected_withdrawals [ ^ 1 ] . validator_index + 1 ) mod
lenu64 ( state . validators )
state . next_withdrawal_validator_index = next_validator_index
else :
# Advance sweep by the max length of the sweep if there was not a full set
# of withdrawals
let next_index =
state . next_withdrawal_validator_index +
MAX_VALIDATORS_PER_WITHDRAWALS_SWEEP
let next_validator_index = next_index mod lenu64 ( state . validators )
2022-11-21 07:44:49 +00:00
state . next_withdrawal_validator_index = next_validator_index
2022-10-27 06:29:24 +00:00
ok ( )
2024-04-25 08:41:17 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.5.0-alpha.0/specs/electra/beacon-chain.md#new-process_execution_layer_withdrawal_request
func process_execution_layer_withdrawal_request * (
cfg : RuntimeConfig , state : var electra . BeaconState ,
execution_layer_withdrawal_request : ExecutionLayerWithdrawalRequest ,
cache : var StateCache ) =
let
amount = execution_layer_withdrawal_request . amount
is_full_exit_request = amount = = static ( FULL_EXIT_REQUEST_AMOUNT . Gwei )
# If partial withdrawal queue is full, only full exits are processed
if lenu64 ( state . pending_partial_withdrawals ) = =
PENDING_PARTIAL_WITHDRAWALS_LIMIT and not is_full_exit_request :
return
let
request_pubkey = execution_layer_withdrawal_request . validator_pubkey
index = findValidatorIndex ( state , request_pubkey ) . valueOr :
return
validator = state . validators . item ( index )
# Verify withdrawal credentials
let
has_correct_credential = has_execution_withdrawal_credential ( validator )
is_correct_source_address =
validator . withdrawal_credentials . data . toOpenArray ( 12 , 31 ) = =
execution_layer_withdrawal_request . source_address . data
if not ( has_correct_credential and is_correct_source_address ) :
return
# Verify the validator is active
if not is_active_validator ( validator , get_current_epoch ( state ) ) :
return
# Verify exit has not been initiated
if validator . exit_epoch ! = FAR_FUTURE_EPOCH :
return
# Verify the validator has been active long enough
if get_current_epoch ( state ) <
validator . activation_epoch + cfg . SHARD_COMMITTEE_PERIOD :
return
let pending_balance_to_withdraw =
get_pending_balance_to_withdraw ( state , index )
if is_full_exit_request :
# Only exit validator if it has no pending withdrawals in the queue
if pending_balance_to_withdraw = = 0 . Gwei :
if initiate_validator_exit ( cfg , state , index , default ( ExitQueueInfo ) ,
cache ) . isErr ( ) :
return
return
let
has_sufficient_effective_balance =
validator . effective_balance > = static ( MIN_ACTIVATION_BALANCE . Gwei )
has_excess_balance = state . balances . item ( index ) >
static ( MIN_ACTIVATION_BALANCE . Gwei ) + pending_balance_to_withdraw
# Only allow partial withdrawals with compounding withdrawal credentials
if has_compounding_withdrawal_credential ( validator ) and
has_sufficient_effective_balance and has_excess_balance :
let
to_withdraw = min (
state . balances . item ( index ) - static ( MIN_ACTIVATION_BALANCE . Gwei ) -
pending_balance_to_withdraw ,
amount
)
exit_queue_epoch =
compute_exit_epoch_and_update_churn ( cfg , state , to_withdraw , cache )
withdrawable_epoch =
Epoch ( exit_queue_epoch + cfg . MIN_VALIDATOR_WITHDRAWABILITY_DELAY )
2024-04-29 02:19:10 +00:00
# In theory can fail, but failing/early returning here is indistinguishable
2024-04-25 08:41:17 +00:00
discard state . pending_partial_withdrawals . add ( PendingPartialWithdrawal (
index : index . uint64 ,
amount : to_withdraw ,
withdrawable_epoch : withdrawable_epoch ,
) )
2024-03-14 06:26:36 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.4.0/specs/deneb/beacon-chain.md#kzg_commitment_to_versioned_hash
2023-06-10 05:39:10 +00:00
func kzg_commitment_to_versioned_hash * (
2023-05-09 19:51:36 +00:00
kzg_commitment : KzgCommitment ) : VersionedHash =
2024-03-14 06:26:36 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.4.0/specs/deneb/beacon-chain.md#blob
2022-12-08 02:07:41 +00:00
const VERSIONED_HASH_VERSION_KZG = 0x01 'u 8
var res : VersionedHash
res [ 0 ] = VERSIONED_HASH_VERSION_KZG
res [ 1 .. 31 ] = eth2digest ( kzg_commitment ) . data . toOpenArray ( 1 , 31 )
res
2024-01-15 15:53:34 +00:00
proc validate_blobs * (
expected_kzg_commitments : seq [ KzgCommitment ] , blobs : seq [ KzgBlob ] ,
proofs : seq [ KzgProof ] ) : Result [ void , string ] =
2023-09-19 22:13:58 +00:00
let res = verifyProofs ( blobs , expected_kzg_commitments , proofs ) . valueOr :
2024-01-15 15:53:34 +00:00
return err ( " validate_blobs proof verification error: " & error ( ) )
2023-09-19 22:13:58 +00:00
if not res :
2024-01-15 15:53:34 +00:00
return err ( " validate_blobs proof verification failed " )
2023-01-04 12:34:15 +00:00
ok ( )
2021-05-28 15:25:58 +00:00
# TODO workaround for https://github.com/nim-lang/Nim/issues/18095
# copy of datatypes/phase0.nim
type SomePhase0Block =
phase0 . BeaconBlock | phase0 . SigVerifiedBeaconBlock | phase0 . TrustedBeaconBlock
proc process_block * (
Implement split preset/config support (#2710)
* Implement split preset/config support
This is the initial bulk refactor to introduce runtime config values in
a number of places, somewhat replacing the existing mechanism of loading
network metadata.
It still needs more work, this is the initial refactor that introduces
runtime configuration in some of the places that need it.
The PR changes the way presets and constants work, to match the spec. In
particular, a "preset" now refers to the compile-time configuration
while a "cfg" or "RuntimeConfig" is the dynamic part.
A single binary can support either mainnet or minimal, but not both.
Support for other presets has been removed completely (can be readded,
in case there's need).
There's a number of outstanding tasks:
* `SECONDS_PER_SLOT` still needs fixing
* loading custom runtime configs needs redoing
* checking constants against YAML file
* yeerongpilly support
`build/nimbus_beacon_node --network=yeerongpilly --discv5:no --log-level=DEBUG`
* load fork epoch from config
* fix fork digest sent in status
* nicer error string for request failures
* fix tools
* one more
* fixup
* fixup
* fixup
* use "standard" network definition folder in local testnet
Files are loaded from their standard locations, including genesis etc,
to conform to the format used in the `eth2-networks` repo.
* fix launch scripts, allow unknown config values
* fix base config of rest test
* cleanups
* bundle mainnet config using common loader
* fix spec links and names
* only include supported preset in binary
* drop yeerongpilly, add altair-devnet-0, support boot_enr.yaml
2021-07-12 13:01:38 +00:00
cfg : RuntimeConfig ,
2021-05-28 15:25:58 +00:00
state : var phase0 . BeaconState , blck : SomePhase0Block , flags : UpdateFlags ,
2024-03-04 17:00:46 +00:00
cache : var StateCache ) : Result [ BlockRewards , cstring ] =
2021-05-28 15:25:58 +00:00
## When there's a new block, we need to verify that the block is sane and
## update the state accordingly - the state is left in an unknown state when
## block application fails (!)
? process_block_header ( state , blck , flags , cache )
? process_randao ( state , blck . body , flags , cache )
? process_eth1_data ( state , blck . body )
2024-03-04 17:00:46 +00:00
ok ( ? process_operations ( cfg , state , blck . body , 0 . Gwei , flags , cache ) )
2021-05-28 15:25:58 +00:00
2024-03-14 06:26:36 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.4.0/specs/altair/beacon-chain.md#block-processing
2021-05-28 15:25:58 +00:00
# TODO workaround for https://github.com/nim-lang/Nim/issues/18095
# copy of datatypes/altair.nim
type SomeAltairBlock =
altair . BeaconBlock | altair . SigVerifiedBeaconBlock | altair . TrustedBeaconBlock
2020-03-15 13:01:37 +00:00
proc process_block * (
Implement split preset/config support (#2710)
* Implement split preset/config support
This is the initial bulk refactor to introduce runtime config values in
a number of places, somewhat replacing the existing mechanism of loading
network metadata.
It still needs more work, this is the initial refactor that introduces
runtime configuration in some of the places that need it.
The PR changes the way presets and constants work, to match the spec. In
particular, a "preset" now refers to the compile-time configuration
while a "cfg" or "RuntimeConfig" is the dynamic part.
A single binary can support either mainnet or minimal, but not both.
Support for other presets has been removed completely (can be readded,
in case there's need).
There's a number of outstanding tasks:
* `SECONDS_PER_SLOT` still needs fixing
* loading custom runtime configs needs redoing
* checking constants against YAML file
* yeerongpilly support
`build/nimbus_beacon_node --network=yeerongpilly --discv5:no --log-level=DEBUG`
* load fork epoch from config
* fix fork digest sent in status
* nicer error string for request failures
* fix tools
* one more
* fixup
* fixup
* fixup
* use "standard" network definition folder in local testnet
Files are loaded from their standard locations, including genesis etc,
to conform to the format used in the `eth2-networks` repo.
* fix launch scripts, allow unknown config values
* fix base config of rest test
* cleanups
* bundle mainnet config using common loader
* fix spec links and names
* only include supported preset in binary
* drop yeerongpilly, add altair-devnet-0, support boot_enr.yaml
2021-07-12 13:01:38 +00:00
cfg : RuntimeConfig ,
2021-05-28 15:25:58 +00:00
state : var altair . BeaconState , blck : SomeAltairBlock , flags : UpdateFlags ,
2024-03-04 17:00:46 +00:00
cache : var StateCache ) : Result [ BlockRewards , cstring ] =
2019-06-28 13:44:44 +00:00
## When there's a new block, we need to verify that the block is sane and
2020-11-02 17:34:23 +00:00
## update the state accordingly - the state is left in an unknown state when
## block application fails (!)
2019-10-21 08:11:54 +00:00
2021-04-08 10:11:04 +00:00
? process_block_header ( state , blck , flags , cache )
? process_randao ( state , blck . body , flags , cache )
? process_eth1_data ( state , blck . body )
2021-10-13 14:24:36 +00:00
let
total_active_balance = get_total_active_balance ( state , cache )
base_reward_per_increment =
get_base_reward_per_increment ( total_active_balance )
2024-03-04 17:00:46 +00:00
var operations_rewards = ? process_operations (
2021-10-13 14:24:36 +00:00
cfg , state , blck . body , base_reward_per_increment , flags , cache )
2024-03-04 17:00:46 +00:00
operations_rewards . sync_aggregate = ? process_sync_aggregate (
2023-06-17 06:00:01 +00:00
state , blck . body . sync_aggregate , total_active_balance ,
flags , cache ) # [New in Altair]
2019-06-28 13:44:44 +00:00
2024-03-04 17:00:46 +00:00
ok ( operations_rewards )
2021-06-04 10:38:00 +00:00
2024-05-09 05:03:10 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.5.0-alpha.2/specs/bellatrix/beacon-chain.md#block-processing
2021-09-27 14:22:58 +00:00
# TODO workaround for https://github.com/nim-lang/Nim/issues/18095
2022-03-23 12:49:54 +00:00
type SomeBellatrixBlock =
2022-01-06 11:25:35 +00:00
bellatrix . BeaconBlock | bellatrix . SigVerifiedBeaconBlock | bellatrix . TrustedBeaconBlock
2021-09-27 14:22:58 +00:00
proc process_block * (
cfg : RuntimeConfig ,
2022-03-23 12:49:54 +00:00
state : var bellatrix . BeaconState , blck : SomeBellatrixBlock ,
2024-03-04 17:00:46 +00:00
flags : UpdateFlags , cache : var StateCache ) : Result [ BlockRewards , cstring ] =
2021-09-27 14:22:58 +00:00
## When there's a new block, we need to verify that the block is sane and
## update the state accordingly - the state is left in an unknown state when
## block application fails (!)
? process_block_header ( state , blck , flags , cache )
if is_execution_enabled ( state , blck . body ) :
? process_execution_payload (
state , blck . body . execution_payload ,
2023-05-09 18:16:49 +00:00
func ( _ : bellatrix . ExecutionPayload ) : bool = true ) # [New in Bellatrix]
2021-09-27 14:22:58 +00:00
? process_randao ( state , blck . body , flags , cache )
? process_eth1_data ( state , blck . body )
2021-10-13 14:24:36 +00:00
let
total_active_balance = get_total_active_balance ( state , cache )
base_reward_per_increment =
get_base_reward_per_increment ( total_active_balance )
2024-03-04 17:00:46 +00:00
var operations_rewards = ? process_operations (
2021-10-13 14:24:36 +00:00
cfg , state , blck . body , base_reward_per_increment , flags , cache )
2024-03-04 17:00:46 +00:00
operations_rewards . sync_aggregate = ? process_sync_aggregate (
2023-06-17 06:00:01 +00:00
state , blck . body . sync_aggregate , total_active_balance , flags , cache )
2021-09-27 14:22:58 +00:00
2024-03-04 17:00:46 +00:00
ok ( operations_rewards )
2022-11-02 16:23:30 +00:00
2023-05-09 18:16:49 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.3.0/specs/capella/beacon-chain.md#block-processing
2022-11-02 16:23:30 +00:00
# TODO workaround for https://github.com/nim-lang/Nim/issues/18095
type SomeCapellaBlock =
capella . BeaconBlock | capella . SigVerifiedBeaconBlock | capella . TrustedBeaconBlock
proc process_block * (
cfg : RuntimeConfig ,
state : var capella . BeaconState , blck : SomeCapellaBlock ,
2024-03-04 17:00:46 +00:00
flags : UpdateFlags , cache : var StateCache ) : Result [ BlockRewards , cstring ] =
2022-11-07 18:37:48 +00:00
## When there's a new block, we need to verify that the block is sane and
## update the state accordingly - the state is left in an unknown state when
## block application fails (!)
? process_block_header ( state , blck , flags , cache )
2023-06-10 05:39:10 +00:00
# Consensus specs v1.4.0 unconditionally assume is_execution_enabled is
# true, but intentionally keep such a check.
2022-11-07 18:37:48 +00:00
if is_execution_enabled ( state , blck . body ) :
2023-05-09 18:16:49 +00:00
? process_withdrawals (
state , blck . body . execution_payload ) # [New in Capella]
2022-11-07 18:37:48 +00:00
? process_execution_payload (
state , blck . body . execution_payload ,
2023-05-09 18:16:49 +00:00
func ( _ : capella . ExecutionPayload ) : bool = true ) # [Modified in Capella]
2022-11-07 18:37:48 +00:00
? process_randao ( state , blck . body , flags , cache )
? process_eth1_data ( state , blck . body )
let
total_active_balance = get_total_active_balance ( state , cache )
base_reward_per_increment =
get_base_reward_per_increment ( total_active_balance )
2024-03-04 17:00:46 +00:00
var operations_rewards = ? process_operations (
2023-01-06 16:28:46 +00:00
cfg , state , blck . body , base_reward_per_increment ,
flags , cache ) # [Modified in Capella]
2024-03-04 17:00:46 +00:00
operations_rewards . sync_aggregate = ? process_sync_aggregate (
2023-06-17 06:00:01 +00:00
state , blck . body . sync_aggregate , total_active_balance , flags , cache )
2022-11-07 18:37:48 +00:00
2024-03-04 17:00:46 +00:00
ok ( operations_rewards )
2022-12-08 02:07:41 +00:00
2023-05-09 18:16:49 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.3.0/specs/deneb/beacon-chain.md#block-processing
2022-12-08 02:07:41 +00:00
# TODO workaround for https://github.com/nim-lang/Nim/issues/18095
2023-03-11 00:28:19 +00:00
type SomeDenebBlock =
2023-02-22 13:10:00 +00:00
deneb . BeaconBlock | deneb . SigVerifiedBeaconBlock | deneb . TrustedBeaconBlock
2022-12-08 02:07:41 +00:00
proc process_block * (
cfg : RuntimeConfig ,
2023-03-11 00:28:19 +00:00
state : var deneb . BeaconState , blck : SomeDenebBlock ,
2024-03-04 17:00:46 +00:00
flags : UpdateFlags , cache : var StateCache ) : Result [ BlockRewards , cstring ] =
2022-12-08 02:07:41 +00:00
## When there's a new block, we need to verify that the block is sane and
## update the state accordingly - the state is left in an unknown state when
## block application fails (!)
? process_block_header ( state , blck , flags , cache )
2023-06-10 05:39:10 +00:00
# Consensus specs v1.4.0 unconditionally assume is_execution_enabled is
# true, but intentionally keep such a check.
2022-12-08 02:07:41 +00:00
if is_execution_enabled ( state , blck . body ) :
? process_withdrawals ( state , blck . body . execution_payload )
? process_execution_payload (
2023-05-25 07:55:00 +00:00
state , blck . body ,
2023-03-02 20:09:24 +00:00
func ( _ : deneb . ExecutionPayload ) : bool = true ) # [Modified in Deneb]
2022-12-08 02:07:41 +00:00
? process_randao ( state , blck . body , flags , cache )
? process_eth1_data ( state , blck . body )
let
total_active_balance = get_total_active_balance ( state , cache )
base_reward_per_increment =
get_base_reward_per_increment ( total_active_balance )
2024-03-04 17:00:46 +00:00
var operations_rewards = ? process_operations (
2022-12-08 02:07:41 +00:00
cfg , state , blck . body , base_reward_per_increment , flags , cache )
2024-03-04 17:00:46 +00:00
operations_rewards . sync_aggregate = ? process_sync_aggregate (
2023-06-17 06:00:01 +00:00
state , blck . body . sync_aggregate , total_active_balance , flags , cache )
2022-12-08 02:07:41 +00:00
2024-03-04 17:00:46 +00:00
ok ( operations_rewards )
2024-02-26 02:38:21 +00:00
2024-04-28 09:15:03 +00:00
# https://github.com/ethereum/consensus-specs/blob/v1.5.0-alpha.1/specs/electra/beacon-chain.md#block-processing
2024-02-26 02:38:21 +00:00
# TODO workaround for https://github.com/nim-lang/Nim/issues/18095
type SomeElectraBlock =
electra . BeaconBlock | electra . SigVerifiedBeaconBlock | electra . TrustedBeaconBlock
proc process_block * (
cfg : RuntimeConfig ,
state : var electra . BeaconState , blck : SomeElectraBlock ,
2024-03-04 17:00:46 +00:00
flags : UpdateFlags , cache : var StateCache ) : Result [ BlockRewards , cstring ] =
2024-02-26 02:38:21 +00:00
## When there's a new block, we need to verify that the block is sane and
## update the state accordingly - the state is left in an unknown state when
## block application fails (!)
? process_block_header ( state , blck , flags , cache )
# Consensus specs v1.4.0 unconditionally assume is_execution_enabled is
# true, but intentionally keep such a check.
if is_execution_enabled ( state , blck . body ) :
? process_withdrawals ( state , blck . body . execution_payload )
? process_execution_payload (
state , blck . body ,
func ( _ : electra . ExecutionPayload ) : bool = true )
? process_randao ( state , blck . body , flags , cache )
? process_eth1_data ( state , blck . body )
let
total_active_balance = get_total_active_balance ( state , cache )
base_reward_per_increment =
get_base_reward_per_increment ( total_active_balance )
2024-04-06 13:11:47 +00:00
var operations_rewards = ? process_operations (
cfg , state , blck . body , base_reward_per_increment , flags , cache )
operations_rewards . sync_aggregate = ? process_sync_aggregate (
2024-02-26 02:38:21 +00:00
state , blck . body . sync_aggregate , total_active_balance , flags , cache )
2024-03-04 17:00:46 +00:00
ok ( operations_rewards )