nimbus-eth2/beacon_chain/era_db.nim

428 lines
14 KiB
Nim
Raw Permalink Normal View History

era: load blocks and states (#3394) * era: load blocks and states Era files contain finalized history and can be thought of as an alternative source for block and state data that allows clients to avoid syncing this information from the P2P network - the P2P network is then used to "top up" the client with the most recent data. They can be freely shared in the community via whatever means (http, torrent, etc) and serve as a permanent cold store of consensus data (and, after the merge, execution data) for history buffs and bean counters alike. This PR gently introduces support for loading blocks and states in two cases: block requests from rest/p2p and frontfilling when doing checkpoint sync. The era files are used as a secondary source if the information is not found in the database - compared to the database, there are a few key differences: * the database stores the block indexed by block root while the era file indexes by slot - the former is used only in rest, while the latter is used both by p2p and rest. * when loading blocks from era files, the root is no longer trivially available - if it is needed, it must either be computed (slow) or cached (messy) - the good news is that for p2p requests, it is not needed * in era files, "framed" snappy encoding is used while in the database we store unframed snappy - for p2p2 requests, the latter requires recompression while the former could avoid it * front-filling is the process of using era files to replace backfilling - in theory this front-filling could happen from any block and front-fills with gaps could also be entertained, but our backfilling algorithm cannot take advantage of this because there's no (simple) way to tell it to "skip" a range. * front-filling, as implemented, is a bit slow (10s to load mainnet): we load the full BeaconState for every era to grab the roots of the blocks - it would be better to partially load the state - as such, it would also be good to be able to partially decompress snappy blobs * lookups from REST via root are served by first looking up a block summary in the database, then using the slot to load the block data from the era file - however, there needs to be an option to create the summary table from era files to fully support historical queries To test this, `ncli_db` has an era file exporter: the files it creates should be placed in an `era` folder next to `db` in the data directory. What's interesting in particular about this setup is that `db` remains as the source of truth for security purposes - it stores the latest synced head root which in turn determines where a node "starts" its consensus participation - the era directory however can be freely shared between nodes / people without any (significant) security implications, assuming the era files are consistent / not broken. There's lots of future improvements to be had: * we can drop the in-memory `BlockRef` index almost entirely - at this point, resident memory usage of Nimbus should drop to a cool 500-600 mb * we could serve era files via REST trivially: this would drop backfill times to whatever time it takes to download the files - unlike the current implementation that downloads block by block, downloading an era at a time almost entirely cuts out request overhead * we can "reasonably" recreate detailed state history from almost any point in time, turning an O(slot) process into O(1) effectively - we'll still need caches and indices to do this with sufficient efficiency for the rest api, but at least it cuts the whole process down to minutes instead of hours, for arbitrary points in time * CI: ignore failures with Nim-1.6 (temporary) * test fixes Co-authored-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
2022-03-23 08:58:17 +00:00
# Copyright (c) 2018-2022 Status Research & Development GmbH
# Licensed and distributed under either of
# * MIT license (license terms in the root directory or at https://opensource.org/licenses/MIT).
# * Apache v2 license (license terms in the root directory or at https://www.apache.org/licenses/LICENSE-2.0).
# at your option. This file may not be copied, modified, or distributed except according to those terms.
import
std/os,
stew/results, snappy, taskpools,
../ncli/e2store, eth/keys,
era: load blocks and states (#3394) * era: load blocks and states Era files contain finalized history and can be thought of as an alternative source for block and state data that allows clients to avoid syncing this information from the P2P network - the P2P network is then used to "top up" the client with the most recent data. They can be freely shared in the community via whatever means (http, torrent, etc) and serve as a permanent cold store of consensus data (and, after the merge, execution data) for history buffs and bean counters alike. This PR gently introduces support for loading blocks and states in two cases: block requests from rest/p2p and frontfilling when doing checkpoint sync. The era files are used as a secondary source if the information is not found in the database - compared to the database, there are a few key differences: * the database stores the block indexed by block root while the era file indexes by slot - the former is used only in rest, while the latter is used both by p2p and rest. * when loading blocks from era files, the root is no longer trivially available - if it is needed, it must either be computed (slow) or cached (messy) - the good news is that for p2p requests, it is not needed * in era files, "framed" snappy encoding is used while in the database we store unframed snappy - for p2p2 requests, the latter requires recompression while the former could avoid it * front-filling is the process of using era files to replace backfilling - in theory this front-filling could happen from any block and front-fills with gaps could also be entertained, but our backfilling algorithm cannot take advantage of this because there's no (simple) way to tell it to "skip" a range. * front-filling, as implemented, is a bit slow (10s to load mainnet): we load the full BeaconState for every era to grab the roots of the blocks - it would be better to partially load the state - as such, it would also be good to be able to partially decompress snappy blobs * lookups from REST via root are served by first looking up a block summary in the database, then using the slot to load the block data from the era file - however, there needs to be an option to create the summary table from era files to fully support historical queries To test this, `ncli_db` has an era file exporter: the files it creates should be placed in an `era` folder next to `db` in the data directory. What's interesting in particular about this setup is that `db` remains as the source of truth for security purposes - it stores the latest synced head root which in turn determines where a node "starts" its consensus participation - the era directory however can be freely shared between nodes / people without any (significant) security implications, assuming the era files are consistent / not broken. There's lots of future improvements to be had: * we can drop the in-memory `BlockRef` index almost entirely - at this point, resident memory usage of Nimbus should drop to a cool 500-600 mb * we could serve era files via REST trivially: this would drop backfill times to whatever time it takes to download the files - unlike the current implementation that downloads block by block, downloading an era at a time almost entirely cuts out request overhead * we can "reasonably" recreate detailed state history from almost any point in time, turning an O(slot) process into O(1) effectively - we'll still need caches and indices to do this with sufficient efficiency for the rest api, but at least it cuts the whole process down to minutes instead of hours, for arbitrary points in time * CI: ignore failures with Nim-1.6 (temporary) * test fixes Co-authored-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
2022-03-23 08:58:17 +00:00
./spec/datatypes/[altair, bellatrix, phase0],
./spec/[beaconstate, forks, signatures_batch],
era: load blocks and states (#3394) * era: load blocks and states Era files contain finalized history and can be thought of as an alternative source for block and state data that allows clients to avoid syncing this information from the P2P network - the P2P network is then used to "top up" the client with the most recent data. They can be freely shared in the community via whatever means (http, torrent, etc) and serve as a permanent cold store of consensus data (and, after the merge, execution data) for history buffs and bean counters alike. This PR gently introduces support for loading blocks and states in two cases: block requests from rest/p2p and frontfilling when doing checkpoint sync. The era files are used as a secondary source if the information is not found in the database - compared to the database, there are a few key differences: * the database stores the block indexed by block root while the era file indexes by slot - the former is used only in rest, while the latter is used both by p2p and rest. * when loading blocks from era files, the root is no longer trivially available - if it is needed, it must either be computed (slow) or cached (messy) - the good news is that for p2p requests, it is not needed * in era files, "framed" snappy encoding is used while in the database we store unframed snappy - for p2p2 requests, the latter requires recompression while the former could avoid it * front-filling is the process of using era files to replace backfilling - in theory this front-filling could happen from any block and front-fills with gaps could also be entertained, but our backfilling algorithm cannot take advantage of this because there's no (simple) way to tell it to "skip" a range. * front-filling, as implemented, is a bit slow (10s to load mainnet): we load the full BeaconState for every era to grab the roots of the blocks - it would be better to partially load the state - as such, it would also be good to be able to partially decompress snappy blobs * lookups from REST via root are served by first looking up a block summary in the database, then using the slot to load the block data from the era file - however, there needs to be an option to create the summary table from era files to fully support historical queries To test this, `ncli_db` has an era file exporter: the files it creates should be placed in an `era` folder next to `db` in the data directory. What's interesting in particular about this setup is that `db` remains as the source of truth for security purposes - it stores the latest synced head root which in turn determines where a node "starts" its consensus participation - the era directory however can be freely shared between nodes / people without any (significant) security implications, assuming the era files are consistent / not broken. There's lots of future improvements to be had: * we can drop the in-memory `BlockRef` index almost entirely - at this point, resident memory usage of Nimbus should drop to a cool 500-600 mb * we could serve era files via REST trivially: this would drop backfill times to whatever time it takes to download the files - unlike the current implementation that downloads block by block, downloading an era at a time almost entirely cuts out request overhead * we can "reasonably" recreate detailed state history from almost any point in time, turning an O(slot) process into O(1) effectively - we'll still need caches and indices to do this with sufficient efficiency for the rest api, but at least it cuts the whole process down to minutes instead of hours, for arbitrary points in time * CI: ignore failures with Nim-1.6 (temporary) * test fixes Co-authored-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
2022-03-23 08:58:17 +00:00
./consensus_object_pools/block_dag # TODO move to somewhere else to avoid circular deps
export results, forks, e2store
type
EraFile* = ref object
handle: Opt[IoHandle]
era: load blocks and states (#3394) * era: load blocks and states Era files contain finalized history and can be thought of as an alternative source for block and state data that allows clients to avoid syncing this information from the P2P network - the P2P network is then used to "top up" the client with the most recent data. They can be freely shared in the community via whatever means (http, torrent, etc) and serve as a permanent cold store of consensus data (and, after the merge, execution data) for history buffs and bean counters alike. This PR gently introduces support for loading blocks and states in two cases: block requests from rest/p2p and frontfilling when doing checkpoint sync. The era files are used as a secondary source if the information is not found in the database - compared to the database, there are a few key differences: * the database stores the block indexed by block root while the era file indexes by slot - the former is used only in rest, while the latter is used both by p2p and rest. * when loading blocks from era files, the root is no longer trivially available - if it is needed, it must either be computed (slow) or cached (messy) - the good news is that for p2p requests, it is not needed * in era files, "framed" snappy encoding is used while in the database we store unframed snappy - for p2p2 requests, the latter requires recompression while the former could avoid it * front-filling is the process of using era files to replace backfilling - in theory this front-filling could happen from any block and front-fills with gaps could also be entertained, but our backfilling algorithm cannot take advantage of this because there's no (simple) way to tell it to "skip" a range. * front-filling, as implemented, is a bit slow (10s to load mainnet): we load the full BeaconState for every era to grab the roots of the blocks - it would be better to partially load the state - as such, it would also be good to be able to partially decompress snappy blobs * lookups from REST via root are served by first looking up a block summary in the database, then using the slot to load the block data from the era file - however, there needs to be an option to create the summary table from era files to fully support historical queries To test this, `ncli_db` has an era file exporter: the files it creates should be placed in an `era` folder next to `db` in the data directory. What's interesting in particular about this setup is that `db` remains as the source of truth for security purposes - it stores the latest synced head root which in turn determines where a node "starts" its consensus participation - the era directory however can be freely shared between nodes / people without any (significant) security implications, assuming the era files are consistent / not broken. There's lots of future improvements to be had: * we can drop the in-memory `BlockRef` index almost entirely - at this point, resident memory usage of Nimbus should drop to a cool 500-600 mb * we could serve era files via REST trivially: this would drop backfill times to whatever time it takes to download the files - unlike the current implementation that downloads block by block, downloading an era at a time almost entirely cuts out request overhead * we can "reasonably" recreate detailed state history from almost any point in time, turning an O(slot) process into O(1) effectively - we'll still need caches and indices to do this with sufficient efficiency for the rest api, but at least it cuts the whole process down to minutes instead of hours, for arbitrary points in time * CI: ignore failures with Nim-1.6 (temporary) * test fixes Co-authored-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
2022-03-23 08:58:17 +00:00
stateIdx: Index
blockIdx: Index
EraDB* = ref object
## The Era database manages a collection of era files that together make up
## a linear history of beacon chain data.
cfg: RuntimeConfig
path: string
genesis_validators_root: Eth2Digest
files: seq[EraFile]
proc open*(_: type EraFile, name: string): Result[EraFile, string] =
era: load blocks and states (#3394) * era: load blocks and states Era files contain finalized history and can be thought of as an alternative source for block and state data that allows clients to avoid syncing this information from the P2P network - the P2P network is then used to "top up" the client with the most recent data. They can be freely shared in the community via whatever means (http, torrent, etc) and serve as a permanent cold store of consensus data (and, after the merge, execution data) for history buffs and bean counters alike. This PR gently introduces support for loading blocks and states in two cases: block requests from rest/p2p and frontfilling when doing checkpoint sync. The era files are used as a secondary source if the information is not found in the database - compared to the database, there are a few key differences: * the database stores the block indexed by block root while the era file indexes by slot - the former is used only in rest, while the latter is used both by p2p and rest. * when loading blocks from era files, the root is no longer trivially available - if it is needed, it must either be computed (slow) or cached (messy) - the good news is that for p2p requests, it is not needed * in era files, "framed" snappy encoding is used while in the database we store unframed snappy - for p2p2 requests, the latter requires recompression while the former could avoid it * front-filling is the process of using era files to replace backfilling - in theory this front-filling could happen from any block and front-fills with gaps could also be entertained, but our backfilling algorithm cannot take advantage of this because there's no (simple) way to tell it to "skip" a range. * front-filling, as implemented, is a bit slow (10s to load mainnet): we load the full BeaconState for every era to grab the roots of the blocks - it would be better to partially load the state - as such, it would also be good to be able to partially decompress snappy blobs * lookups from REST via root are served by first looking up a block summary in the database, then using the slot to load the block data from the era file - however, there needs to be an option to create the summary table from era files to fully support historical queries To test this, `ncli_db` has an era file exporter: the files it creates should be placed in an `era` folder next to `db` in the data directory. What's interesting in particular about this setup is that `db` remains as the source of truth for security purposes - it stores the latest synced head root which in turn determines where a node "starts" its consensus participation - the era directory however can be freely shared between nodes / people without any (significant) security implications, assuming the era files are consistent / not broken. There's lots of future improvements to be had: * we can drop the in-memory `BlockRef` index almost entirely - at this point, resident memory usage of Nimbus should drop to a cool 500-600 mb * we could serve era files via REST trivially: this would drop backfill times to whatever time it takes to download the files - unlike the current implementation that downloads block by block, downloading an era at a time almost entirely cuts out request overhead * we can "reasonably" recreate detailed state history from almost any point in time, turning an O(slot) process into O(1) effectively - we'll still need caches and indices to do this with sufficient efficiency for the rest api, but at least it cuts the whole process down to minutes instead of hours, for arbitrary points in time * CI: ignore failures with Nim-1.6 (temporary) * test fixes Co-authored-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
2022-03-23 08:58:17 +00:00
var
f = Opt[IoHandle].ok(? openFile(name, {OpenFlags.Read}).mapErr(ioErrorMsg))
era: load blocks and states (#3394) * era: load blocks and states Era files contain finalized history and can be thought of as an alternative source for block and state data that allows clients to avoid syncing this information from the P2P network - the P2P network is then used to "top up" the client with the most recent data. They can be freely shared in the community via whatever means (http, torrent, etc) and serve as a permanent cold store of consensus data (and, after the merge, execution data) for history buffs and bean counters alike. This PR gently introduces support for loading blocks and states in two cases: block requests from rest/p2p and frontfilling when doing checkpoint sync. The era files are used as a secondary source if the information is not found in the database - compared to the database, there are a few key differences: * the database stores the block indexed by block root while the era file indexes by slot - the former is used only in rest, while the latter is used both by p2p and rest. * when loading blocks from era files, the root is no longer trivially available - if it is needed, it must either be computed (slow) or cached (messy) - the good news is that for p2p requests, it is not needed * in era files, "framed" snappy encoding is used while in the database we store unframed snappy - for p2p2 requests, the latter requires recompression while the former could avoid it * front-filling is the process of using era files to replace backfilling - in theory this front-filling could happen from any block and front-fills with gaps could also be entertained, but our backfilling algorithm cannot take advantage of this because there's no (simple) way to tell it to "skip" a range. * front-filling, as implemented, is a bit slow (10s to load mainnet): we load the full BeaconState for every era to grab the roots of the blocks - it would be better to partially load the state - as such, it would also be good to be able to partially decompress snappy blobs * lookups from REST via root are served by first looking up a block summary in the database, then using the slot to load the block data from the era file - however, there needs to be an option to create the summary table from era files to fully support historical queries To test this, `ncli_db` has an era file exporter: the files it creates should be placed in an `era` folder next to `db` in the data directory. What's interesting in particular about this setup is that `db` remains as the source of truth for security purposes - it stores the latest synced head root which in turn determines where a node "starts" its consensus participation - the era directory however can be freely shared between nodes / people without any (significant) security implications, assuming the era files are consistent / not broken. There's lots of future improvements to be had: * we can drop the in-memory `BlockRef` index almost entirely - at this point, resident memory usage of Nimbus should drop to a cool 500-600 mb * we could serve era files via REST trivially: this would drop backfill times to whatever time it takes to download the files - unlike the current implementation that downloads block by block, downloading an era at a time almost entirely cuts out request overhead * we can "reasonably" recreate detailed state history from almost any point in time, turning an O(slot) process into O(1) effectively - we'll still need caches and indices to do this with sufficient efficiency for the rest api, but at least it cuts the whole process down to minutes instead of hours, for arbitrary points in time * CI: ignore failures with Nim-1.6 (temporary) * test fixes Co-authored-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
2022-03-23 08:58:17 +00:00
defer:
if f.isSome(): discard closeFile(f[])
# Indices can be found at the end of each era file - we only support
# single-era files for now
? f[].setFilePos(0, SeekPosition.SeekEnd).mapErr(ioErrorMsg)
# Last in the file is the state index
let
stateIdxPos = ? f[].findIndexStartOffset()
? f[].setFilePos(stateIdxPos, SeekPosition.SeekCurrent).mapErr(ioErrorMsg)
let
stateIdx = ? f[].readIndex()
if stateIdx.offsets.len() != 1:
return err("State index length invalid")
? f[].setFilePos(stateIdxPos, SeekPosition.SeekCurrent).mapErr(ioErrorMsg)
# The genesis era file does not contain a block index
let blockIdx = if stateIdx.startSlot > 0:
let
blockIdxPos = ? f[].findIndexStartOffset()
? f[].setFilePos(blockIdxPos, SeekPosition.SeekCurrent).mapErr(ioErrorMsg)
let idx = ? f[].readIndex()
if idx.offsets.lenu64() != SLOTS_PER_HISTORICAL_ROOT:
return err("Block index length invalid")
idx
else:
Index()
let res = EraFile(handle: f, stateIdx: stateIdx, blockIdx: blockIdx)
era: load blocks and states (#3394) * era: load blocks and states Era files contain finalized history and can be thought of as an alternative source for block and state data that allows clients to avoid syncing this information from the P2P network - the P2P network is then used to "top up" the client with the most recent data. They can be freely shared in the community via whatever means (http, torrent, etc) and serve as a permanent cold store of consensus data (and, after the merge, execution data) for history buffs and bean counters alike. This PR gently introduces support for loading blocks and states in two cases: block requests from rest/p2p and frontfilling when doing checkpoint sync. The era files are used as a secondary source if the information is not found in the database - compared to the database, there are a few key differences: * the database stores the block indexed by block root while the era file indexes by slot - the former is used only in rest, while the latter is used both by p2p and rest. * when loading blocks from era files, the root is no longer trivially available - if it is needed, it must either be computed (slow) or cached (messy) - the good news is that for p2p requests, it is not needed * in era files, "framed" snappy encoding is used while in the database we store unframed snappy - for p2p2 requests, the latter requires recompression while the former could avoid it * front-filling is the process of using era files to replace backfilling - in theory this front-filling could happen from any block and front-fills with gaps could also be entertained, but our backfilling algorithm cannot take advantage of this because there's no (simple) way to tell it to "skip" a range. * front-filling, as implemented, is a bit slow (10s to load mainnet): we load the full BeaconState for every era to grab the roots of the blocks - it would be better to partially load the state - as such, it would also be good to be able to partially decompress snappy blobs * lookups from REST via root are served by first looking up a block summary in the database, then using the slot to load the block data from the era file - however, there needs to be an option to create the summary table from era files to fully support historical queries To test this, `ncli_db` has an era file exporter: the files it creates should be placed in an `era` folder next to `db` in the data directory. What's interesting in particular about this setup is that `db` remains as the source of truth for security purposes - it stores the latest synced head root which in turn determines where a node "starts" its consensus participation - the era directory however can be freely shared between nodes / people without any (significant) security implications, assuming the era files are consistent / not broken. There's lots of future improvements to be had: * we can drop the in-memory `BlockRef` index almost entirely - at this point, resident memory usage of Nimbus should drop to a cool 500-600 mb * we could serve era files via REST trivially: this would drop backfill times to whatever time it takes to download the files - unlike the current implementation that downloads block by block, downloading an era at a time almost entirely cuts out request overhead * we can "reasonably" recreate detailed state history from almost any point in time, turning an O(slot) process into O(1) effectively - we'll still need caches and indices to do this with sufficient efficiency for the rest api, but at least it cuts the whole process down to minutes instead of hours, for arbitrary points in time * CI: ignore failures with Nim-1.6 (temporary) * test fixes Co-authored-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
2022-03-23 08:58:17 +00:00
reset(f)
ok res
era: load blocks and states (#3394) * era: load blocks and states Era files contain finalized history and can be thought of as an alternative source for block and state data that allows clients to avoid syncing this information from the P2P network - the P2P network is then used to "top up" the client with the most recent data. They can be freely shared in the community via whatever means (http, torrent, etc) and serve as a permanent cold store of consensus data (and, after the merge, execution data) for history buffs and bean counters alike. This PR gently introduces support for loading blocks and states in two cases: block requests from rest/p2p and frontfilling when doing checkpoint sync. The era files are used as a secondary source if the information is not found in the database - compared to the database, there are a few key differences: * the database stores the block indexed by block root while the era file indexes by slot - the former is used only in rest, while the latter is used both by p2p and rest. * when loading blocks from era files, the root is no longer trivially available - if it is needed, it must either be computed (slow) or cached (messy) - the good news is that for p2p requests, it is not needed * in era files, "framed" snappy encoding is used while in the database we store unframed snappy - for p2p2 requests, the latter requires recompression while the former could avoid it * front-filling is the process of using era files to replace backfilling - in theory this front-filling could happen from any block and front-fills with gaps could also be entertained, but our backfilling algorithm cannot take advantage of this because there's no (simple) way to tell it to "skip" a range. * front-filling, as implemented, is a bit slow (10s to load mainnet): we load the full BeaconState for every era to grab the roots of the blocks - it would be better to partially load the state - as such, it would also be good to be able to partially decompress snappy blobs * lookups from REST via root are served by first looking up a block summary in the database, then using the slot to load the block data from the era file - however, there needs to be an option to create the summary table from era files to fully support historical queries To test this, `ncli_db` has an era file exporter: the files it creates should be placed in an `era` folder next to `db` in the data directory. What's interesting in particular about this setup is that `db` remains as the source of truth for security purposes - it stores the latest synced head root which in turn determines where a node "starts" its consensus participation - the era directory however can be freely shared between nodes / people without any (significant) security implications, assuming the era files are consistent / not broken. There's lots of future improvements to be had: * we can drop the in-memory `BlockRef` index almost entirely - at this point, resident memory usage of Nimbus should drop to a cool 500-600 mb * we could serve era files via REST trivially: this would drop backfill times to whatever time it takes to download the files - unlike the current implementation that downloads block by block, downloading an era at a time almost entirely cuts out request overhead * we can "reasonably" recreate detailed state history from almost any point in time, turning an O(slot) process into O(1) effectively - we'll still need caches and indices to do this with sufficient efficiency for the rest api, but at least it cuts the whole process down to minutes instead of hours, for arbitrary points in time * CI: ignore failures with Nim-1.6 (temporary) * test fixes Co-authored-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
2022-03-23 08:58:17 +00:00
proc close(f: EraFile) =
if f.handle.isSome():
discard closeFile(f.handle.get())
reset(f.handle)
era: load blocks and states (#3394) * era: load blocks and states Era files contain finalized history and can be thought of as an alternative source for block and state data that allows clients to avoid syncing this information from the P2P network - the P2P network is then used to "top up" the client with the most recent data. They can be freely shared in the community via whatever means (http, torrent, etc) and serve as a permanent cold store of consensus data (and, after the merge, execution data) for history buffs and bean counters alike. This PR gently introduces support for loading blocks and states in two cases: block requests from rest/p2p and frontfilling when doing checkpoint sync. The era files are used as a secondary source if the information is not found in the database - compared to the database, there are a few key differences: * the database stores the block indexed by block root while the era file indexes by slot - the former is used only in rest, while the latter is used both by p2p and rest. * when loading blocks from era files, the root is no longer trivially available - if it is needed, it must either be computed (slow) or cached (messy) - the good news is that for p2p requests, it is not needed * in era files, "framed" snappy encoding is used while in the database we store unframed snappy - for p2p2 requests, the latter requires recompression while the former could avoid it * front-filling is the process of using era files to replace backfilling - in theory this front-filling could happen from any block and front-fills with gaps could also be entertained, but our backfilling algorithm cannot take advantage of this because there's no (simple) way to tell it to "skip" a range. * front-filling, as implemented, is a bit slow (10s to load mainnet): we load the full BeaconState for every era to grab the roots of the blocks - it would be better to partially load the state - as such, it would also be good to be able to partially decompress snappy blobs * lookups from REST via root are served by first looking up a block summary in the database, then using the slot to load the block data from the era file - however, there needs to be an option to create the summary table from era files to fully support historical queries To test this, `ncli_db` has an era file exporter: the files it creates should be placed in an `era` folder next to `db` in the data directory. What's interesting in particular about this setup is that `db` remains as the source of truth for security purposes - it stores the latest synced head root which in turn determines where a node "starts" its consensus participation - the era directory however can be freely shared between nodes / people without any (significant) security implications, assuming the era files are consistent / not broken. There's lots of future improvements to be had: * we can drop the in-memory `BlockRef` index almost entirely - at this point, resident memory usage of Nimbus should drop to a cool 500-600 mb * we could serve era files via REST trivially: this would drop backfill times to whatever time it takes to download the files - unlike the current implementation that downloads block by block, downloading an era at a time almost entirely cuts out request overhead * we can "reasonably" recreate detailed state history from almost any point in time, turning an O(slot) process into O(1) effectively - we'll still need caches and indices to do this with sufficient efficiency for the rest api, but at least it cuts the whole process down to minutes instead of hours, for arbitrary points in time * CI: ignore failures with Nim-1.6 (temporary) * test fixes Co-authored-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
2022-03-23 08:58:17 +00:00
proc getBlockSZ*(
f: EraFile, slot: Slot, bytes: var seq[byte]): Result[void, string] =
era: load blocks and states (#3394) * era: load blocks and states Era files contain finalized history and can be thought of as an alternative source for block and state data that allows clients to avoid syncing this information from the P2P network - the P2P network is then used to "top up" the client with the most recent data. They can be freely shared in the community via whatever means (http, torrent, etc) and serve as a permanent cold store of consensus data (and, after the merge, execution data) for history buffs and bean counters alike. This PR gently introduces support for loading blocks and states in two cases: block requests from rest/p2p and frontfilling when doing checkpoint sync. The era files are used as a secondary source if the information is not found in the database - compared to the database, there are a few key differences: * the database stores the block indexed by block root while the era file indexes by slot - the former is used only in rest, while the latter is used both by p2p and rest. * when loading blocks from era files, the root is no longer trivially available - if it is needed, it must either be computed (slow) or cached (messy) - the good news is that for p2p requests, it is not needed * in era files, "framed" snappy encoding is used while in the database we store unframed snappy - for p2p2 requests, the latter requires recompression while the former could avoid it * front-filling is the process of using era files to replace backfilling - in theory this front-filling could happen from any block and front-fills with gaps could also be entertained, but our backfilling algorithm cannot take advantage of this because there's no (simple) way to tell it to "skip" a range. * front-filling, as implemented, is a bit slow (10s to load mainnet): we load the full BeaconState for every era to grab the roots of the blocks - it would be better to partially load the state - as such, it would also be good to be able to partially decompress snappy blobs * lookups from REST via root are served by first looking up a block summary in the database, then using the slot to load the block data from the era file - however, there needs to be an option to create the summary table from era files to fully support historical queries To test this, `ncli_db` has an era file exporter: the files it creates should be placed in an `era` folder next to `db` in the data directory. What's interesting in particular about this setup is that `db` remains as the source of truth for security purposes - it stores the latest synced head root which in turn determines where a node "starts" its consensus participation - the era directory however can be freely shared between nodes / people without any (significant) security implications, assuming the era files are consistent / not broken. There's lots of future improvements to be had: * we can drop the in-memory `BlockRef` index almost entirely - at this point, resident memory usage of Nimbus should drop to a cool 500-600 mb * we could serve era files via REST trivially: this would drop backfill times to whatever time it takes to download the files - unlike the current implementation that downloads block by block, downloading an era at a time almost entirely cuts out request overhead * we can "reasonably" recreate detailed state history from almost any point in time, turning an O(slot) process into O(1) effectively - we'll still need caches and indices to do this with sufficient efficiency for the rest api, but at least it cuts the whole process down to minutes instead of hours, for arbitrary points in time * CI: ignore failures with Nim-1.6 (temporary) * test fixes Co-authored-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
2022-03-23 08:58:17 +00:00
## Get a snappy-frame-compressed version of the block data - may overwrite
## `bytes` on error
##
## Sets `bytes` to an empty seq and returns success if there is no block at
## the given slot, according to the index
era: load blocks and states (#3394) * era: load blocks and states Era files contain finalized history and can be thought of as an alternative source for block and state data that allows clients to avoid syncing this information from the P2P network - the P2P network is then used to "top up" the client with the most recent data. They can be freely shared in the community via whatever means (http, torrent, etc) and serve as a permanent cold store of consensus data (and, after the merge, execution data) for history buffs and bean counters alike. This PR gently introduces support for loading blocks and states in two cases: block requests from rest/p2p and frontfilling when doing checkpoint sync. The era files are used as a secondary source if the information is not found in the database - compared to the database, there are a few key differences: * the database stores the block indexed by block root while the era file indexes by slot - the former is used only in rest, while the latter is used both by p2p and rest. * when loading blocks from era files, the root is no longer trivially available - if it is needed, it must either be computed (slow) or cached (messy) - the good news is that for p2p requests, it is not needed * in era files, "framed" snappy encoding is used while in the database we store unframed snappy - for p2p2 requests, the latter requires recompression while the former could avoid it * front-filling is the process of using era files to replace backfilling - in theory this front-filling could happen from any block and front-fills with gaps could also be entertained, but our backfilling algorithm cannot take advantage of this because there's no (simple) way to tell it to "skip" a range. * front-filling, as implemented, is a bit slow (10s to load mainnet): we load the full BeaconState for every era to grab the roots of the blocks - it would be better to partially load the state - as such, it would also be good to be able to partially decompress snappy blobs * lookups from REST via root are served by first looking up a block summary in the database, then using the slot to load the block data from the era file - however, there needs to be an option to create the summary table from era files to fully support historical queries To test this, `ncli_db` has an era file exporter: the files it creates should be placed in an `era` folder next to `db` in the data directory. What's interesting in particular about this setup is that `db` remains as the source of truth for security purposes - it stores the latest synced head root which in turn determines where a node "starts" its consensus participation - the era directory however can be freely shared between nodes / people without any (significant) security implications, assuming the era files are consistent / not broken. There's lots of future improvements to be had: * we can drop the in-memory `BlockRef` index almost entirely - at this point, resident memory usage of Nimbus should drop to a cool 500-600 mb * we could serve era files via REST trivially: this would drop backfill times to whatever time it takes to download the files - unlike the current implementation that downloads block by block, downloading an era at a time almost entirely cuts out request overhead * we can "reasonably" recreate detailed state history from almost any point in time, turning an O(slot) process into O(1) effectively - we'll still need caches and indices to do this with sufficient efficiency for the rest api, but at least it cuts the whole process down to minutes instead of hours, for arbitrary points in time * CI: ignore failures with Nim-1.6 (temporary) * test fixes Co-authored-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
2022-03-23 08:58:17 +00:00
# Block content for the blocks of an era is found in the file for the _next_
# era
doAssert not isNil(f) and f[].handle.isSome
era: load blocks and states (#3394) * era: load blocks and states Era files contain finalized history and can be thought of as an alternative source for block and state data that allows clients to avoid syncing this information from the P2P network - the P2P network is then used to "top up" the client with the most recent data. They can be freely shared in the community via whatever means (http, torrent, etc) and serve as a permanent cold store of consensus data (and, after the merge, execution data) for history buffs and bean counters alike. This PR gently introduces support for loading blocks and states in two cases: block requests from rest/p2p and frontfilling when doing checkpoint sync. The era files are used as a secondary source if the information is not found in the database - compared to the database, there are a few key differences: * the database stores the block indexed by block root while the era file indexes by slot - the former is used only in rest, while the latter is used both by p2p and rest. * when loading blocks from era files, the root is no longer trivially available - if it is needed, it must either be computed (slow) or cached (messy) - the good news is that for p2p requests, it is not needed * in era files, "framed" snappy encoding is used while in the database we store unframed snappy - for p2p2 requests, the latter requires recompression while the former could avoid it * front-filling is the process of using era files to replace backfilling - in theory this front-filling could happen from any block and front-fills with gaps could also be entertained, but our backfilling algorithm cannot take advantage of this because there's no (simple) way to tell it to "skip" a range. * front-filling, as implemented, is a bit slow (10s to load mainnet): we load the full BeaconState for every era to grab the roots of the blocks - it would be better to partially load the state - as such, it would also be good to be able to partially decompress snappy blobs * lookups from REST via root are served by first looking up a block summary in the database, then using the slot to load the block data from the era file - however, there needs to be an option to create the summary table from era files to fully support historical queries To test this, `ncli_db` has an era file exporter: the files it creates should be placed in an `era` folder next to `db` in the data directory. What's interesting in particular about this setup is that `db` remains as the source of truth for security purposes - it stores the latest synced head root which in turn determines where a node "starts" its consensus participation - the era directory however can be freely shared between nodes / people without any (significant) security implications, assuming the era files are consistent / not broken. There's lots of future improvements to be had: * we can drop the in-memory `BlockRef` index almost entirely - at this point, resident memory usage of Nimbus should drop to a cool 500-600 mb * we could serve era files via REST trivially: this would drop backfill times to whatever time it takes to download the files - unlike the current implementation that downloads block by block, downloading an era at a time almost entirely cuts out request overhead * we can "reasonably" recreate detailed state history from almost any point in time, turning an O(slot) process into O(1) effectively - we'll still need caches and indices to do this with sufficient efficiency for the rest api, but at least it cuts the whole process down to minutes instead of hours, for arbitrary points in time * CI: ignore failures with Nim-1.6 (temporary) * test fixes Co-authored-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
2022-03-23 08:58:17 +00:00
let
pos = f[].blockIdx.offsets[slot - f[].blockIdx.startSlot]
if pos == 0:
bytes = @[]
return ok()
era: load blocks and states (#3394) * era: load blocks and states Era files contain finalized history and can be thought of as an alternative source for block and state data that allows clients to avoid syncing this information from the P2P network - the P2P network is then used to "top up" the client with the most recent data. They can be freely shared in the community via whatever means (http, torrent, etc) and serve as a permanent cold store of consensus data (and, after the merge, execution data) for history buffs and bean counters alike. This PR gently introduces support for loading blocks and states in two cases: block requests from rest/p2p and frontfilling when doing checkpoint sync. The era files are used as a secondary source if the information is not found in the database - compared to the database, there are a few key differences: * the database stores the block indexed by block root while the era file indexes by slot - the former is used only in rest, while the latter is used both by p2p and rest. * when loading blocks from era files, the root is no longer trivially available - if it is needed, it must either be computed (slow) or cached (messy) - the good news is that for p2p requests, it is not needed * in era files, "framed" snappy encoding is used while in the database we store unframed snappy - for p2p2 requests, the latter requires recompression while the former could avoid it * front-filling is the process of using era files to replace backfilling - in theory this front-filling could happen from any block and front-fills with gaps could also be entertained, but our backfilling algorithm cannot take advantage of this because there's no (simple) way to tell it to "skip" a range. * front-filling, as implemented, is a bit slow (10s to load mainnet): we load the full BeaconState for every era to grab the roots of the blocks - it would be better to partially load the state - as such, it would also be good to be able to partially decompress snappy blobs * lookups from REST via root are served by first looking up a block summary in the database, then using the slot to load the block data from the era file - however, there needs to be an option to create the summary table from era files to fully support historical queries To test this, `ncli_db` has an era file exporter: the files it creates should be placed in an `era` folder next to `db` in the data directory. What's interesting in particular about this setup is that `db` remains as the source of truth for security purposes - it stores the latest synced head root which in turn determines where a node "starts" its consensus participation - the era directory however can be freely shared between nodes / people without any (significant) security implications, assuming the era files are consistent / not broken. There's lots of future improvements to be had: * we can drop the in-memory `BlockRef` index almost entirely - at this point, resident memory usage of Nimbus should drop to a cool 500-600 mb * we could serve era files via REST trivially: this would drop backfill times to whatever time it takes to download the files - unlike the current implementation that downloads block by block, downloading an era at a time almost entirely cuts out request overhead * we can "reasonably" recreate detailed state history from almost any point in time, turning an O(slot) process into O(1) effectively - we'll still need caches and indices to do this with sufficient efficiency for the rest api, but at least it cuts the whole process down to minutes instead of hours, for arbitrary points in time * CI: ignore failures with Nim-1.6 (temporary) * test fixes Co-authored-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
2022-03-23 08:58:17 +00:00
? f[].handle.get().setFilePos(pos, SeekPosition.SeekBegin).mapErr(ioErrorMsg)
era: load blocks and states (#3394) * era: load blocks and states Era files contain finalized history and can be thought of as an alternative source for block and state data that allows clients to avoid syncing this information from the P2P network - the P2P network is then used to "top up" the client with the most recent data. They can be freely shared in the community via whatever means (http, torrent, etc) and serve as a permanent cold store of consensus data (and, after the merge, execution data) for history buffs and bean counters alike. This PR gently introduces support for loading blocks and states in two cases: block requests from rest/p2p and frontfilling when doing checkpoint sync. The era files are used as a secondary source if the information is not found in the database - compared to the database, there are a few key differences: * the database stores the block indexed by block root while the era file indexes by slot - the former is used only in rest, while the latter is used both by p2p and rest. * when loading blocks from era files, the root is no longer trivially available - if it is needed, it must either be computed (slow) or cached (messy) - the good news is that for p2p requests, it is not needed * in era files, "framed" snappy encoding is used while in the database we store unframed snappy - for p2p2 requests, the latter requires recompression while the former could avoid it * front-filling is the process of using era files to replace backfilling - in theory this front-filling could happen from any block and front-fills with gaps could also be entertained, but our backfilling algorithm cannot take advantage of this because there's no (simple) way to tell it to "skip" a range. * front-filling, as implemented, is a bit slow (10s to load mainnet): we load the full BeaconState for every era to grab the roots of the blocks - it would be better to partially load the state - as such, it would also be good to be able to partially decompress snappy blobs * lookups from REST via root are served by first looking up a block summary in the database, then using the slot to load the block data from the era file - however, there needs to be an option to create the summary table from era files to fully support historical queries To test this, `ncli_db` has an era file exporter: the files it creates should be placed in an `era` folder next to `db` in the data directory. What's interesting in particular about this setup is that `db` remains as the source of truth for security purposes - it stores the latest synced head root which in turn determines where a node "starts" its consensus participation - the era directory however can be freely shared between nodes / people without any (significant) security implications, assuming the era files are consistent / not broken. There's lots of future improvements to be had: * we can drop the in-memory `BlockRef` index almost entirely - at this point, resident memory usage of Nimbus should drop to a cool 500-600 mb * we could serve era files via REST trivially: this would drop backfill times to whatever time it takes to download the files - unlike the current implementation that downloads block by block, downloading an era at a time almost entirely cuts out request overhead * we can "reasonably" recreate detailed state history from almost any point in time, turning an O(slot) process into O(1) effectively - we'll still need caches and indices to do this with sufficient efficiency for the rest api, but at least it cuts the whole process down to minutes instead of hours, for arbitrary points in time * CI: ignore failures with Nim-1.6 (temporary) * test fixes Co-authored-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
2022-03-23 08:58:17 +00:00
let header = ? f[].handle.get().readRecord(bytes)
era: load blocks and states (#3394) * era: load blocks and states Era files contain finalized history and can be thought of as an alternative source for block and state data that allows clients to avoid syncing this information from the P2P network - the P2P network is then used to "top up" the client with the most recent data. They can be freely shared in the community via whatever means (http, torrent, etc) and serve as a permanent cold store of consensus data (and, after the merge, execution data) for history buffs and bean counters alike. This PR gently introduces support for loading blocks and states in two cases: block requests from rest/p2p and frontfilling when doing checkpoint sync. The era files are used as a secondary source if the information is not found in the database - compared to the database, there are a few key differences: * the database stores the block indexed by block root while the era file indexes by slot - the former is used only in rest, while the latter is used both by p2p and rest. * when loading blocks from era files, the root is no longer trivially available - if it is needed, it must either be computed (slow) or cached (messy) - the good news is that for p2p requests, it is not needed * in era files, "framed" snappy encoding is used while in the database we store unframed snappy - for p2p2 requests, the latter requires recompression while the former could avoid it * front-filling is the process of using era files to replace backfilling - in theory this front-filling could happen from any block and front-fills with gaps could also be entertained, but our backfilling algorithm cannot take advantage of this because there's no (simple) way to tell it to "skip" a range. * front-filling, as implemented, is a bit slow (10s to load mainnet): we load the full BeaconState for every era to grab the roots of the blocks - it would be better to partially load the state - as such, it would also be good to be able to partially decompress snappy blobs * lookups from REST via root are served by first looking up a block summary in the database, then using the slot to load the block data from the era file - however, there needs to be an option to create the summary table from era files to fully support historical queries To test this, `ncli_db` has an era file exporter: the files it creates should be placed in an `era` folder next to `db` in the data directory. What's interesting in particular about this setup is that `db` remains as the source of truth for security purposes - it stores the latest synced head root which in turn determines where a node "starts" its consensus participation - the era directory however can be freely shared between nodes / people without any (significant) security implications, assuming the era files are consistent / not broken. There's lots of future improvements to be had: * we can drop the in-memory `BlockRef` index almost entirely - at this point, resident memory usage of Nimbus should drop to a cool 500-600 mb * we could serve era files via REST trivially: this would drop backfill times to whatever time it takes to download the files - unlike the current implementation that downloads block by block, downloading an era at a time almost entirely cuts out request overhead * we can "reasonably" recreate detailed state history from almost any point in time, turning an O(slot) process into O(1) effectively - we'll still need caches and indices to do this with sufficient efficiency for the rest api, but at least it cuts the whole process down to minutes instead of hours, for arbitrary points in time * CI: ignore failures with Nim-1.6 (temporary) * test fixes Co-authored-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
2022-03-23 08:58:17 +00:00
if header.typ != SnappyBeaconBlock:
return err("Invalid era file: didn't find block at index position")
ok()
proc getBlockSSZ*(
f: EraFile, slot: Slot, bytes: var seq[byte]): Result[void, string] =
era: load blocks and states (#3394) * era: load blocks and states Era files contain finalized history and can be thought of as an alternative source for block and state data that allows clients to avoid syncing this information from the P2P network - the P2P network is then used to "top up" the client with the most recent data. They can be freely shared in the community via whatever means (http, torrent, etc) and serve as a permanent cold store of consensus data (and, after the merge, execution data) for history buffs and bean counters alike. This PR gently introduces support for loading blocks and states in two cases: block requests from rest/p2p and frontfilling when doing checkpoint sync. The era files are used as a secondary source if the information is not found in the database - compared to the database, there are a few key differences: * the database stores the block indexed by block root while the era file indexes by slot - the former is used only in rest, while the latter is used both by p2p and rest. * when loading blocks from era files, the root is no longer trivially available - if it is needed, it must either be computed (slow) or cached (messy) - the good news is that for p2p requests, it is not needed * in era files, "framed" snappy encoding is used while in the database we store unframed snappy - for p2p2 requests, the latter requires recompression while the former could avoid it * front-filling is the process of using era files to replace backfilling - in theory this front-filling could happen from any block and front-fills with gaps could also be entertained, but our backfilling algorithm cannot take advantage of this because there's no (simple) way to tell it to "skip" a range. * front-filling, as implemented, is a bit slow (10s to load mainnet): we load the full BeaconState for every era to grab the roots of the blocks - it would be better to partially load the state - as such, it would also be good to be able to partially decompress snappy blobs * lookups from REST via root are served by first looking up a block summary in the database, then using the slot to load the block data from the era file - however, there needs to be an option to create the summary table from era files to fully support historical queries To test this, `ncli_db` has an era file exporter: the files it creates should be placed in an `era` folder next to `db` in the data directory. What's interesting in particular about this setup is that `db` remains as the source of truth for security purposes - it stores the latest synced head root which in turn determines where a node "starts" its consensus participation - the era directory however can be freely shared between nodes / people without any (significant) security implications, assuming the era files are consistent / not broken. There's lots of future improvements to be had: * we can drop the in-memory `BlockRef` index almost entirely - at this point, resident memory usage of Nimbus should drop to a cool 500-600 mb * we could serve era files via REST trivially: this would drop backfill times to whatever time it takes to download the files - unlike the current implementation that downloads block by block, downloading an era at a time almost entirely cuts out request overhead * we can "reasonably" recreate detailed state history from almost any point in time, turning an O(slot) process into O(1) effectively - we'll still need caches and indices to do this with sufficient efficiency for the rest api, but at least it cuts the whole process down to minutes instead of hours, for arbitrary points in time * CI: ignore failures with Nim-1.6 (temporary) * test fixes Co-authored-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
2022-03-23 08:58:17 +00:00
var tmp: seq[byte]
? f.getBlockSZ(slot, tmp)
era: load blocks and states (#3394) * era: load blocks and states Era files contain finalized history and can be thought of as an alternative source for block and state data that allows clients to avoid syncing this information from the P2P network - the P2P network is then used to "top up" the client with the most recent data. They can be freely shared in the community via whatever means (http, torrent, etc) and serve as a permanent cold store of consensus data (and, after the merge, execution data) for history buffs and bean counters alike. This PR gently introduces support for loading blocks and states in two cases: block requests from rest/p2p and frontfilling when doing checkpoint sync. The era files are used as a secondary source if the information is not found in the database - compared to the database, there are a few key differences: * the database stores the block indexed by block root while the era file indexes by slot - the former is used only in rest, while the latter is used both by p2p and rest. * when loading blocks from era files, the root is no longer trivially available - if it is needed, it must either be computed (slow) or cached (messy) - the good news is that for p2p requests, it is not needed * in era files, "framed" snappy encoding is used while in the database we store unframed snappy - for p2p2 requests, the latter requires recompression while the former could avoid it * front-filling is the process of using era files to replace backfilling - in theory this front-filling could happen from any block and front-fills with gaps could also be entertained, but our backfilling algorithm cannot take advantage of this because there's no (simple) way to tell it to "skip" a range. * front-filling, as implemented, is a bit slow (10s to load mainnet): we load the full BeaconState for every era to grab the roots of the blocks - it would be better to partially load the state - as such, it would also be good to be able to partially decompress snappy blobs * lookups from REST via root are served by first looking up a block summary in the database, then using the slot to load the block data from the era file - however, there needs to be an option to create the summary table from era files to fully support historical queries To test this, `ncli_db` has an era file exporter: the files it creates should be placed in an `era` folder next to `db` in the data directory. What's interesting in particular about this setup is that `db` remains as the source of truth for security purposes - it stores the latest synced head root which in turn determines where a node "starts" its consensus participation - the era directory however can be freely shared between nodes / people without any (significant) security implications, assuming the era files are consistent / not broken. There's lots of future improvements to be had: * we can drop the in-memory `BlockRef` index almost entirely - at this point, resident memory usage of Nimbus should drop to a cool 500-600 mb * we could serve era files via REST trivially: this would drop backfill times to whatever time it takes to download the files - unlike the current implementation that downloads block by block, downloading an era at a time almost entirely cuts out request overhead * we can "reasonably" recreate detailed state history from almost any point in time, turning an O(slot) process into O(1) effectively - we'll still need caches and indices to do this with sufficient efficiency for the rest api, but at least it cuts the whole process down to minutes instead of hours, for arbitrary points in time * CI: ignore failures with Nim-1.6 (temporary) * test fixes Co-authored-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
2022-03-23 08:58:17 +00:00
try:
bytes = decodeFramed(tmp)
era: load blocks and states (#3394) * era: load blocks and states Era files contain finalized history and can be thought of as an alternative source for block and state data that allows clients to avoid syncing this information from the P2P network - the P2P network is then used to "top up" the client with the most recent data. They can be freely shared in the community via whatever means (http, torrent, etc) and serve as a permanent cold store of consensus data (and, after the merge, execution data) for history buffs and bean counters alike. This PR gently introduces support for loading blocks and states in two cases: block requests from rest/p2p and frontfilling when doing checkpoint sync. The era files are used as a secondary source if the information is not found in the database - compared to the database, there are a few key differences: * the database stores the block indexed by block root while the era file indexes by slot - the former is used only in rest, while the latter is used both by p2p and rest. * when loading blocks from era files, the root is no longer trivially available - if it is needed, it must either be computed (slow) or cached (messy) - the good news is that for p2p requests, it is not needed * in era files, "framed" snappy encoding is used while in the database we store unframed snappy - for p2p2 requests, the latter requires recompression while the former could avoid it * front-filling is the process of using era files to replace backfilling - in theory this front-filling could happen from any block and front-fills with gaps could also be entertained, but our backfilling algorithm cannot take advantage of this because there's no (simple) way to tell it to "skip" a range. * front-filling, as implemented, is a bit slow (10s to load mainnet): we load the full BeaconState for every era to grab the roots of the blocks - it would be better to partially load the state - as such, it would also be good to be able to partially decompress snappy blobs * lookups from REST via root are served by first looking up a block summary in the database, then using the slot to load the block data from the era file - however, there needs to be an option to create the summary table from era files to fully support historical queries To test this, `ncli_db` has an era file exporter: the files it creates should be placed in an `era` folder next to `db` in the data directory. What's interesting in particular about this setup is that `db` remains as the source of truth for security purposes - it stores the latest synced head root which in turn determines where a node "starts" its consensus participation - the era directory however can be freely shared between nodes / people without any (significant) security implications, assuming the era files are consistent / not broken. There's lots of future improvements to be had: * we can drop the in-memory `BlockRef` index almost entirely - at this point, resident memory usage of Nimbus should drop to a cool 500-600 mb * we could serve era files via REST trivially: this would drop backfill times to whatever time it takes to download the files - unlike the current implementation that downloads block by block, downloading an era at a time almost entirely cuts out request overhead * we can "reasonably" recreate detailed state history from almost any point in time, turning an O(slot) process into O(1) effectively - we'll still need caches and indices to do this with sufficient efficiency for the rest api, but at least it cuts the whole process down to minutes instead of hours, for arbitrary points in time * CI: ignore failures with Nim-1.6 (temporary) * test fixes Co-authored-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
2022-03-23 08:58:17 +00:00
ok()
except CatchableError as exc:
err(exc.msg)
proc getStateSZ*(
f: EraFile, slot: Slot, bytes: var seq[byte]): Result[void, string] =
## Get a snappy-frame-compressed version of the state data - may overwrite
## `bytes` on error
## https://github.com/google/snappy/blob/8dd58a519f79f0742d4c68fbccb2aed2ddb651e8/framing_format.txt#L34
doAssert not isNil(f) and f[].handle.isSome
# TODO consider multi-era files
if f[].stateIdx.startSlot != slot:
return err("State not found in era file")
let pos = f[].stateIdx.offsets[0]
if pos == 0:
return err("No state at given slot")
? f[].handle.get().setFilePos(pos, SeekPosition.SeekBegin).mapErr(ioErrorMsg)
let header = ? f[].handle.get().readRecord(bytes)
if header.typ != SnappyBeaconState:
return err("Invalid era file: didn't find state at index position")
ok()
proc getStateSSZ*(
f: EraFile, slot: Slot, bytes: var seq[byte],
partial: Opt[int] = default(Opt[int])): Result[void, string] =
var tmp: seq[byte]
? f.getStateSZ(slot, tmp)
let
len = uncompressedLenFramed(tmp).valueOr:
return err("Cannot read uncompressed length, era file corrupt?")
wanted =
if partial.isSome():
min(len, partial.get().uint64 + maxUncompressedFrameDataLen - 1)
else: len
bytes = newSeqUninitialized[byte](wanted)
let (_, written) = uncompressFramed(tmp, bytes).valueOr:
return err("State failed to decompress, era file corrupt?")
ok()
proc verify*(f: EraFile, cfg: RuntimeConfig): Result[Eth2Digest, string] =
## Verify that an era file is internally consistent, returning the state root
## Verification is dominated by block signature checks - about 4-10s on
## decent hardware.
# We'll load the full state and compute its root - then we'll load the blocks
# and make sure that they match the state and that their signatures check out
let
startSlot = f.stateIdx.startSlot
era = startSlot.era
var
taskpool = Taskpool.new()
verifier = BatchVerifier(rng: keys.newRng(), taskpool: taskpool)
var tmp: seq[byte]
? f.getStateSSZ(startSlot, tmp)
let
state =
try: newClone(readSszForkedHashedBeaconState(cfg, tmp))
except CatchableError as exc:
return err("Unable to read state: " & exc.msg)
if era > 0:
var sigs: seq[SignatureSet]
for slot in (era - 1).start_slot()..<era.start_slot():
? f.getBlockSSZ(slot, tmp)
# TODO verify that missing blocks correspond to "repeated" block roots
# in state.block_roots - how to do this for "initial" empty slots in
# the era?
if tmp.len > 0:
let
blck =
try: newClone(readSszForkedSignedBeaconBlock(cfg, tmp))
except CatchableError as exc:
return err("Unable to read block: " & exc.msg)
if getForkedBlockField(blck[], slot) != slot:
return err("Block slot does not match era index")
if blck[].root !=
state[].get_block_root_at_slot(getForkedBlockField(blck[], slot)):
return err("Block does not match state")
let
proposer = getForkedBlockField(blck[], proposer_index)
key = withState(state[]):
if proposer >= forkyState.data.validators.lenu64:
return err("Invalid proposer in block")
forkyState.data.validators.item(proposer).pubkey
cooked = key.load()
sig = blck[].signature.load()
if cooked.isNone():
return err("Cannot load proposer key")
if sig.isNone():
return err("Cannot load block signature")
if slot == GENESIS_SLOT:
if blck[].signature != default(type(blck[].signature)):
return err("Genesis slot signature not empty")
else:
# Batch-verification more than doubles total verification speed
sigs.add block_signature_set(
getStateField(state[], fork),
getStateField(state[], genesis_validators_root), slot, blck[].root,
cooked.get(), sig.get())
if not batchVerify(verifier, sigs):
return err("Invalid block signature")
ok(getStateRoot(state[]))
proc getEraFile(
db: EraDB, historical_roots: openArray[Eth2Digest], era: Era):
Result[EraFile, string] =
for f in db.files:
if f.stateIdx.startSlot.era == era:
return ok(f)
let
eraRoot = eraRoot(
db.genesis_validators_root, historical_roots, era).valueOr:
return err("Era outside of known history")
name = eraFileName(db.cfg, era, eraRoot)
f = ? EraFile.open(db.path / name)
if db.files.len > 16: # TODO LRU
close(db.files[0])
db.files.delete(0)
db.files.add(f)
ok(f)
proc getBlockSZ*(
db: EraDB, historical_roots: openArray[Eth2Digest], slot: Slot,
bytes: var seq[byte]): Result[void, string] =
## Get a snappy-frame-compressed version of the block data - may overwrite
## `bytes` on error
##
## Sets `bytes` to an empty seq and returns success if there is no block at
## the given slot, according to the index
# Block content for the blocks of an era is found in the file for the _next_
# era
let
f = ? db.getEraFile(historical_roots, slot.era + 1)
f.getBlockSZ(slot, bytes)
proc getBlockSSZ*(
db: EraDB, historical_roots: openArray[Eth2Digest], slot: Slot,
bytes: var seq[byte]): Result[void, string] =
let
f = ? db.getEraFile(historical_roots, slot.era + 1)
f.getBlockSSZ(slot, bytes)
era: load blocks and states (#3394) * era: load blocks and states Era files contain finalized history and can be thought of as an alternative source for block and state data that allows clients to avoid syncing this information from the P2P network - the P2P network is then used to "top up" the client with the most recent data. They can be freely shared in the community via whatever means (http, torrent, etc) and serve as a permanent cold store of consensus data (and, after the merge, execution data) for history buffs and bean counters alike. This PR gently introduces support for loading blocks and states in two cases: block requests from rest/p2p and frontfilling when doing checkpoint sync. The era files are used as a secondary source if the information is not found in the database - compared to the database, there are a few key differences: * the database stores the block indexed by block root while the era file indexes by slot - the former is used only in rest, while the latter is used both by p2p and rest. * when loading blocks from era files, the root is no longer trivially available - if it is needed, it must either be computed (slow) or cached (messy) - the good news is that for p2p requests, it is not needed * in era files, "framed" snappy encoding is used while in the database we store unframed snappy - for p2p2 requests, the latter requires recompression while the former could avoid it * front-filling is the process of using era files to replace backfilling - in theory this front-filling could happen from any block and front-fills with gaps could also be entertained, but our backfilling algorithm cannot take advantage of this because there's no (simple) way to tell it to "skip" a range. * front-filling, as implemented, is a bit slow (10s to load mainnet): we load the full BeaconState for every era to grab the roots of the blocks - it would be better to partially load the state - as such, it would also be good to be able to partially decompress snappy blobs * lookups from REST via root are served by first looking up a block summary in the database, then using the slot to load the block data from the era file - however, there needs to be an option to create the summary table from era files to fully support historical queries To test this, `ncli_db` has an era file exporter: the files it creates should be placed in an `era` folder next to `db` in the data directory. What's interesting in particular about this setup is that `db` remains as the source of truth for security purposes - it stores the latest synced head root which in turn determines where a node "starts" its consensus participation - the era directory however can be freely shared between nodes / people without any (significant) security implications, assuming the era files are consistent / not broken. There's lots of future improvements to be had: * we can drop the in-memory `BlockRef` index almost entirely - at this point, resident memory usage of Nimbus should drop to a cool 500-600 mb * we could serve era files via REST trivially: this would drop backfill times to whatever time it takes to download the files - unlike the current implementation that downloads block by block, downloading an era at a time almost entirely cuts out request overhead * we can "reasonably" recreate detailed state history from almost any point in time, turning an O(slot) process into O(1) effectively - we'll still need caches and indices to do this with sufficient efficiency for the rest api, but at least it cuts the whole process down to minutes instead of hours, for arbitrary points in time * CI: ignore failures with Nim-1.6 (temporary) * test fixes Co-authored-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
2022-03-23 08:58:17 +00:00
proc getBlock*(
db: EraDB, historical_roots: openArray[Eth2Digest], slot: Slot,
root: Opt[Eth2Digest], T: type ForkyTrustedSignedBeaconBlock): Opt[T] =
var tmp: seq[byte]
? db.getBlockSSZ(historical_roots, slot, tmp).mapErr(proc(x: auto) = discard)
result.ok(default(T))
try:
readSszBytes(tmp, result.get(), updateRoot = root.isNone)
if root.isSome():
result.get().root = root.get()
except CatchableError as exc:
result.err()
proc getStateSZ*(
db: EraDB, historical_roots: openArray[Eth2Digest], slot: Slot,
bytes: var seq[byte]):
Result[void, string] =
## Get a snappy-frame-compressed version of the state data - may overwrite
## `bytes` on error
## https://github.com/google/snappy/blob/8dd58a519f79f0742d4c68fbccb2aed2ddb651e8/framing_format.txt#L34
# Block content for the blocks of an era is found in the file for the _next_
# era
let
f = ? db.getEraFile(historical_roots, slot.era)
f.getStateSZ(slot, bytes)
era: load blocks and states (#3394) * era: load blocks and states Era files contain finalized history and can be thought of as an alternative source for block and state data that allows clients to avoid syncing this information from the P2P network - the P2P network is then used to "top up" the client with the most recent data. They can be freely shared in the community via whatever means (http, torrent, etc) and serve as a permanent cold store of consensus data (and, after the merge, execution data) for history buffs and bean counters alike. This PR gently introduces support for loading blocks and states in two cases: block requests from rest/p2p and frontfilling when doing checkpoint sync. The era files are used as a secondary source if the information is not found in the database - compared to the database, there are a few key differences: * the database stores the block indexed by block root while the era file indexes by slot - the former is used only in rest, while the latter is used both by p2p and rest. * when loading blocks from era files, the root is no longer trivially available - if it is needed, it must either be computed (slow) or cached (messy) - the good news is that for p2p requests, it is not needed * in era files, "framed" snappy encoding is used while in the database we store unframed snappy - for p2p2 requests, the latter requires recompression while the former could avoid it * front-filling is the process of using era files to replace backfilling - in theory this front-filling could happen from any block and front-fills with gaps could also be entertained, but our backfilling algorithm cannot take advantage of this because there's no (simple) way to tell it to "skip" a range. * front-filling, as implemented, is a bit slow (10s to load mainnet): we load the full BeaconState for every era to grab the roots of the blocks - it would be better to partially load the state - as such, it would also be good to be able to partially decompress snappy blobs * lookups from REST via root are served by first looking up a block summary in the database, then using the slot to load the block data from the era file - however, there needs to be an option to create the summary table from era files to fully support historical queries To test this, `ncli_db` has an era file exporter: the files it creates should be placed in an `era` folder next to `db` in the data directory. What's interesting in particular about this setup is that `db` remains as the source of truth for security purposes - it stores the latest synced head root which in turn determines where a node "starts" its consensus participation - the era directory however can be freely shared between nodes / people without any (significant) security implications, assuming the era files are consistent / not broken. There's lots of future improvements to be had: * we can drop the in-memory `BlockRef` index almost entirely - at this point, resident memory usage of Nimbus should drop to a cool 500-600 mb * we could serve era files via REST trivially: this would drop backfill times to whatever time it takes to download the files - unlike the current implementation that downloads block by block, downloading an era at a time almost entirely cuts out request overhead * we can "reasonably" recreate detailed state history from almost any point in time, turning an O(slot) process into O(1) effectively - we'll still need caches and indices to do this with sufficient efficiency for the rest api, but at least it cuts the whole process down to minutes instead of hours, for arbitrary points in time * CI: ignore failures with Nim-1.6 (temporary) * test fixes Co-authored-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
2022-03-23 08:58:17 +00:00
proc getStateSSZ*(
db: EraDB, historical_roots: openArray[Eth2Digest], slot: Slot,
bytes: var seq[byte], partial = Opt[int].err()): Result[void, string] =
let
f = ? db.getEraFile(historical_roots, slot.era)
era: load blocks and states (#3394) * era: load blocks and states Era files contain finalized history and can be thought of as an alternative source for block and state data that allows clients to avoid syncing this information from the P2P network - the P2P network is then used to "top up" the client with the most recent data. They can be freely shared in the community via whatever means (http, torrent, etc) and serve as a permanent cold store of consensus data (and, after the merge, execution data) for history buffs and bean counters alike. This PR gently introduces support for loading blocks and states in two cases: block requests from rest/p2p and frontfilling when doing checkpoint sync. The era files are used as a secondary source if the information is not found in the database - compared to the database, there are a few key differences: * the database stores the block indexed by block root while the era file indexes by slot - the former is used only in rest, while the latter is used both by p2p and rest. * when loading blocks from era files, the root is no longer trivially available - if it is needed, it must either be computed (slow) or cached (messy) - the good news is that for p2p requests, it is not needed * in era files, "framed" snappy encoding is used while in the database we store unframed snappy - for p2p2 requests, the latter requires recompression while the former could avoid it * front-filling is the process of using era files to replace backfilling - in theory this front-filling could happen from any block and front-fills with gaps could also be entertained, but our backfilling algorithm cannot take advantage of this because there's no (simple) way to tell it to "skip" a range. * front-filling, as implemented, is a bit slow (10s to load mainnet): we load the full BeaconState for every era to grab the roots of the blocks - it would be better to partially load the state - as such, it would also be good to be able to partially decompress snappy blobs * lookups from REST via root are served by first looking up a block summary in the database, then using the slot to load the block data from the era file - however, there needs to be an option to create the summary table from era files to fully support historical queries To test this, `ncli_db` has an era file exporter: the files it creates should be placed in an `era` folder next to `db` in the data directory. What's interesting in particular about this setup is that `db` remains as the source of truth for security purposes - it stores the latest synced head root which in turn determines where a node "starts" its consensus participation - the era directory however can be freely shared between nodes / people without any (significant) security implications, assuming the era files are consistent / not broken. There's lots of future improvements to be had: * we can drop the in-memory `BlockRef` index almost entirely - at this point, resident memory usage of Nimbus should drop to a cool 500-600 mb * we could serve era files via REST trivially: this would drop backfill times to whatever time it takes to download the files - unlike the current implementation that downloads block by block, downloading an era at a time almost entirely cuts out request overhead * we can "reasonably" recreate detailed state history from almost any point in time, turning an O(slot) process into O(1) effectively - we'll still need caches and indices to do this with sufficient efficiency for the rest api, but at least it cuts the whole process down to minutes instead of hours, for arbitrary points in time * CI: ignore failures with Nim-1.6 (temporary) * test fixes Co-authored-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
2022-03-23 08:58:17 +00:00
f.getStateSSZ(slot, bytes)
era: load blocks and states (#3394) * era: load blocks and states Era files contain finalized history and can be thought of as an alternative source for block and state data that allows clients to avoid syncing this information from the P2P network - the P2P network is then used to "top up" the client with the most recent data. They can be freely shared in the community via whatever means (http, torrent, etc) and serve as a permanent cold store of consensus data (and, after the merge, execution data) for history buffs and bean counters alike. This PR gently introduces support for loading blocks and states in two cases: block requests from rest/p2p and frontfilling when doing checkpoint sync. The era files are used as a secondary source if the information is not found in the database - compared to the database, there are a few key differences: * the database stores the block indexed by block root while the era file indexes by slot - the former is used only in rest, while the latter is used both by p2p and rest. * when loading blocks from era files, the root is no longer trivially available - if it is needed, it must either be computed (slow) or cached (messy) - the good news is that for p2p requests, it is not needed * in era files, "framed" snappy encoding is used while in the database we store unframed snappy - for p2p2 requests, the latter requires recompression while the former could avoid it * front-filling is the process of using era files to replace backfilling - in theory this front-filling could happen from any block and front-fills with gaps could also be entertained, but our backfilling algorithm cannot take advantage of this because there's no (simple) way to tell it to "skip" a range. * front-filling, as implemented, is a bit slow (10s to load mainnet): we load the full BeaconState for every era to grab the roots of the blocks - it would be better to partially load the state - as such, it would also be good to be able to partially decompress snappy blobs * lookups from REST via root are served by first looking up a block summary in the database, then using the slot to load the block data from the era file - however, there needs to be an option to create the summary table from era files to fully support historical queries To test this, `ncli_db` has an era file exporter: the files it creates should be placed in an `era` folder next to `db` in the data directory. What's interesting in particular about this setup is that `db` remains as the source of truth for security purposes - it stores the latest synced head root which in turn determines where a node "starts" its consensus participation - the era directory however can be freely shared between nodes / people without any (significant) security implications, assuming the era files are consistent / not broken. There's lots of future improvements to be had: * we can drop the in-memory `BlockRef` index almost entirely - at this point, resident memory usage of Nimbus should drop to a cool 500-600 mb * we could serve era files via REST trivially: this would drop backfill times to whatever time it takes to download the files - unlike the current implementation that downloads block by block, downloading an era at a time almost entirely cuts out request overhead * we can "reasonably" recreate detailed state history from almost any point in time, turning an O(slot) process into O(1) effectively - we'll still need caches and indices to do this with sufficient efficiency for the rest api, but at least it cuts the whole process down to minutes instead of hours, for arbitrary points in time * CI: ignore failures with Nim-1.6 (temporary) * test fixes Co-authored-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
2022-03-23 08:58:17 +00:00
type
PartialBeaconState = object
# The first bytes of a beacon state object are (for now) shared between all
# forks - we exploit this to speed up loading
# Versioning
genesis_time*: uint64
genesis_validators_root*: Eth2Digest
slot*: Slot
fork*: Fork
# History
latest_block_header*: BeaconBlockHeader ##\
## `latest_block_header.state_root == ZERO_HASH` temporarily
block_roots*: HashArray[Limit SLOTS_PER_HISTORICAL_ROOT, Eth2Digest] ##\
## Needed to process attestations, older to newer
proc getPartialState(
db: EraDB, historical_roots: openArray[Eth2Digest], slot: Slot,
output: var PartialBeaconState): bool =
static: doAssert isFixedSize(PartialBeaconState)
const partialBytes = fixedPortionSize(PartialBeaconState)
# TODO we don't need to read all bytes: ideally we could use something like
# faststreams to read uncompressed bytes up to a limit and it would take care
# of reading the minimal number of bytes from disk
var tmp: seq[byte]
if (let e = db.getStateSSZ(
historical_roots, slot, tmp, Opt[int].ok(partialBytes));
e.isErr):
return false
era: load blocks and states (#3394) * era: load blocks and states Era files contain finalized history and can be thought of as an alternative source for block and state data that allows clients to avoid syncing this information from the P2P network - the P2P network is then used to "top up" the client with the most recent data. They can be freely shared in the community via whatever means (http, torrent, etc) and serve as a permanent cold store of consensus data (and, after the merge, execution data) for history buffs and bean counters alike. This PR gently introduces support for loading blocks and states in two cases: block requests from rest/p2p and frontfilling when doing checkpoint sync. The era files are used as a secondary source if the information is not found in the database - compared to the database, there are a few key differences: * the database stores the block indexed by block root while the era file indexes by slot - the former is used only in rest, while the latter is used both by p2p and rest. * when loading blocks from era files, the root is no longer trivially available - if it is needed, it must either be computed (slow) or cached (messy) - the good news is that for p2p requests, it is not needed * in era files, "framed" snappy encoding is used while in the database we store unframed snappy - for p2p2 requests, the latter requires recompression while the former could avoid it * front-filling is the process of using era files to replace backfilling - in theory this front-filling could happen from any block and front-fills with gaps could also be entertained, but our backfilling algorithm cannot take advantage of this because there's no (simple) way to tell it to "skip" a range. * front-filling, as implemented, is a bit slow (10s to load mainnet): we load the full BeaconState for every era to grab the roots of the blocks - it would be better to partially load the state - as such, it would also be good to be able to partially decompress snappy blobs * lookups from REST via root are served by first looking up a block summary in the database, then using the slot to load the block data from the era file - however, there needs to be an option to create the summary table from era files to fully support historical queries To test this, `ncli_db` has an era file exporter: the files it creates should be placed in an `era` folder next to `db` in the data directory. What's interesting in particular about this setup is that `db` remains as the source of truth for security purposes - it stores the latest synced head root which in turn determines where a node "starts" its consensus participation - the era directory however can be freely shared between nodes / people without any (significant) security implications, assuming the era files are consistent / not broken. There's lots of future improvements to be had: * we can drop the in-memory `BlockRef` index almost entirely - at this point, resident memory usage of Nimbus should drop to a cool 500-600 mb * we could serve era files via REST trivially: this would drop backfill times to whatever time it takes to download the files - unlike the current implementation that downloads block by block, downloading an era at a time almost entirely cuts out request overhead * we can "reasonably" recreate detailed state history from almost any point in time, turning an O(slot) process into O(1) effectively - we'll still need caches and indices to do this with sufficient efficiency for the rest api, but at least it cuts the whole process down to minutes instead of hours, for arbitrary points in time * CI: ignore failures with Nim-1.6 (temporary) * test fixes Co-authored-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
2022-03-23 08:58:17 +00:00
try:
readSszBytes(tmp.toOpenArray(0, partialBytes - 1), output)
true
except CatchableError as exc:
# TODO log?
false
iterator getBlockIds*(
db: EraDB, historical_roots: openArray[Eth2Digest], start_slot: Slot): BlockId =
era: load blocks and states (#3394) * era: load blocks and states Era files contain finalized history and can be thought of as an alternative source for block and state data that allows clients to avoid syncing this information from the P2P network - the P2P network is then used to "top up" the client with the most recent data. They can be freely shared in the community via whatever means (http, torrent, etc) and serve as a permanent cold store of consensus data (and, after the merge, execution data) for history buffs and bean counters alike. This PR gently introduces support for loading blocks and states in two cases: block requests from rest/p2p and frontfilling when doing checkpoint sync. The era files are used as a secondary source if the information is not found in the database - compared to the database, there are a few key differences: * the database stores the block indexed by block root while the era file indexes by slot - the former is used only in rest, while the latter is used both by p2p and rest. * when loading blocks from era files, the root is no longer trivially available - if it is needed, it must either be computed (slow) or cached (messy) - the good news is that for p2p requests, it is not needed * in era files, "framed" snappy encoding is used while in the database we store unframed snappy - for p2p2 requests, the latter requires recompression while the former could avoid it * front-filling is the process of using era files to replace backfilling - in theory this front-filling could happen from any block and front-fills with gaps could also be entertained, but our backfilling algorithm cannot take advantage of this because there's no (simple) way to tell it to "skip" a range. * front-filling, as implemented, is a bit slow (10s to load mainnet): we load the full BeaconState for every era to grab the roots of the blocks - it would be better to partially load the state - as such, it would also be good to be able to partially decompress snappy blobs * lookups from REST via root are served by first looking up a block summary in the database, then using the slot to load the block data from the era file - however, there needs to be an option to create the summary table from era files to fully support historical queries To test this, `ncli_db` has an era file exporter: the files it creates should be placed in an `era` folder next to `db` in the data directory. What's interesting in particular about this setup is that `db` remains as the source of truth for security purposes - it stores the latest synced head root which in turn determines where a node "starts" its consensus participation - the era directory however can be freely shared between nodes / people without any (significant) security implications, assuming the era files are consistent / not broken. There's lots of future improvements to be had: * we can drop the in-memory `BlockRef` index almost entirely - at this point, resident memory usage of Nimbus should drop to a cool 500-600 mb * we could serve era files via REST trivially: this would drop backfill times to whatever time it takes to download the files - unlike the current implementation that downloads block by block, downloading an era at a time almost entirely cuts out request overhead * we can "reasonably" recreate detailed state history from almost any point in time, turning an O(slot) process into O(1) effectively - we'll still need caches and indices to do this with sufficient efficiency for the rest api, but at least it cuts the whole process down to minutes instead of hours, for arbitrary points in time * CI: ignore failures with Nim-1.6 (temporary) * test fixes Co-authored-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
2022-03-23 08:58:17 +00:00
var
state = (ref PartialBeaconState)() # avoid stack overflow
slot = start_slot
era: load blocks and states (#3394) * era: load blocks and states Era files contain finalized history and can be thought of as an alternative source for block and state data that allows clients to avoid syncing this information from the P2P network - the P2P network is then used to "top up" the client with the most recent data. They can be freely shared in the community via whatever means (http, torrent, etc) and serve as a permanent cold store of consensus data (and, after the merge, execution data) for history buffs and bean counters alike. This PR gently introduces support for loading blocks and states in two cases: block requests from rest/p2p and frontfilling when doing checkpoint sync. The era files are used as a secondary source if the information is not found in the database - compared to the database, there are a few key differences: * the database stores the block indexed by block root while the era file indexes by slot - the former is used only in rest, while the latter is used both by p2p and rest. * when loading blocks from era files, the root is no longer trivially available - if it is needed, it must either be computed (slow) or cached (messy) - the good news is that for p2p requests, it is not needed * in era files, "framed" snappy encoding is used while in the database we store unframed snappy - for p2p2 requests, the latter requires recompression while the former could avoid it * front-filling is the process of using era files to replace backfilling - in theory this front-filling could happen from any block and front-fills with gaps could also be entertained, but our backfilling algorithm cannot take advantage of this because there's no (simple) way to tell it to "skip" a range. * front-filling, as implemented, is a bit slow (10s to load mainnet): we load the full BeaconState for every era to grab the roots of the blocks - it would be better to partially load the state - as such, it would also be good to be able to partially decompress snappy blobs * lookups from REST via root are served by first looking up a block summary in the database, then using the slot to load the block data from the era file - however, there needs to be an option to create the summary table from era files to fully support historical queries To test this, `ncli_db` has an era file exporter: the files it creates should be placed in an `era` folder next to `db` in the data directory. What's interesting in particular about this setup is that `db` remains as the source of truth for security purposes - it stores the latest synced head root which in turn determines where a node "starts" its consensus participation - the era directory however can be freely shared between nodes / people without any (significant) security implications, assuming the era files are consistent / not broken. There's lots of future improvements to be had: * we can drop the in-memory `BlockRef` index almost entirely - at this point, resident memory usage of Nimbus should drop to a cool 500-600 mb * we could serve era files via REST trivially: this would drop backfill times to whatever time it takes to download the files - unlike the current implementation that downloads block by block, downloading an era at a time almost entirely cuts out request overhead * we can "reasonably" recreate detailed state history from almost any point in time, turning an O(slot) process into O(1) effectively - we'll still need caches and indices to do this with sufficient efficiency for the rest api, but at least it cuts the whole process down to minutes instead of hours, for arbitrary points in time * CI: ignore failures with Nim-1.6 (temporary) * test fixes Co-authored-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
2022-03-23 08:58:17 +00:00
while true:
# `case` ensures we're on a fork for which the `PartialBeaconState`
# definition is consistent
case db.cfg.stateForkAtEpoch(slot.epoch)
of BeaconStateFork.Phase0, BeaconStateFork.Altair, BeaconStateFork.Bellatrix:
let stateSlot = (slot.era() + 1).start_slot()
if not getPartialState(db, historical_roots, stateSlot, state[]):
state = nil # No `return` in iterators
if state == nil:
break
let
x = slot.int mod state[].block_roots.len
for i in x..<state[].block_roots.len():
# TODO these are not actually valid BlockId instances in the case where
# the slot is missing a block - use index to filter..
yield BlockId(root: state[].block_roots.data[i], slot: slot)
era: load blocks and states (#3394) * era: load blocks and states Era files contain finalized history and can be thought of as an alternative source for block and state data that allows clients to avoid syncing this information from the P2P network - the P2P network is then used to "top up" the client with the most recent data. They can be freely shared in the community via whatever means (http, torrent, etc) and serve as a permanent cold store of consensus data (and, after the merge, execution data) for history buffs and bean counters alike. This PR gently introduces support for loading blocks and states in two cases: block requests from rest/p2p and frontfilling when doing checkpoint sync. The era files are used as a secondary source if the information is not found in the database - compared to the database, there are a few key differences: * the database stores the block indexed by block root while the era file indexes by slot - the former is used only in rest, while the latter is used both by p2p and rest. * when loading blocks from era files, the root is no longer trivially available - if it is needed, it must either be computed (slow) or cached (messy) - the good news is that for p2p requests, it is not needed * in era files, "framed" snappy encoding is used while in the database we store unframed snappy - for p2p2 requests, the latter requires recompression while the former could avoid it * front-filling is the process of using era files to replace backfilling - in theory this front-filling could happen from any block and front-fills with gaps could also be entertained, but our backfilling algorithm cannot take advantage of this because there's no (simple) way to tell it to "skip" a range. * front-filling, as implemented, is a bit slow (10s to load mainnet): we load the full BeaconState for every era to grab the roots of the blocks - it would be better to partially load the state - as such, it would also be good to be able to partially decompress snappy blobs * lookups from REST via root are served by first looking up a block summary in the database, then using the slot to load the block data from the era file - however, there needs to be an option to create the summary table from era files to fully support historical queries To test this, `ncli_db` has an era file exporter: the files it creates should be placed in an `era` folder next to `db` in the data directory. What's interesting in particular about this setup is that `db` remains as the source of truth for security purposes - it stores the latest synced head root which in turn determines where a node "starts" its consensus participation - the era directory however can be freely shared between nodes / people without any (significant) security implications, assuming the era files are consistent / not broken. There's lots of future improvements to be had: * we can drop the in-memory `BlockRef` index almost entirely - at this point, resident memory usage of Nimbus should drop to a cool 500-600 mb * we could serve era files via REST trivially: this would drop backfill times to whatever time it takes to download the files - unlike the current implementation that downloads block by block, downloading an era at a time almost entirely cuts out request overhead * we can "reasonably" recreate detailed state history from almost any point in time, turning an O(slot) process into O(1) effectively - we'll still need caches and indices to do this with sufficient efficiency for the rest api, but at least it cuts the whole process down to minutes instead of hours, for arbitrary points in time * CI: ignore failures with Nim-1.6 (temporary) * test fixes Co-authored-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
2022-03-23 08:58:17 +00:00
slot += 1
proc new*(
T: type EraDB, cfg: RuntimeConfig, path: string,
genesis_validators_root: Eth2Digest): EraDB =
EraDB(cfg: cfg, path: path, genesis_validators_root: genesis_validators_root)
era: load blocks and states (#3394) * era: load blocks and states Era files contain finalized history and can be thought of as an alternative source for block and state data that allows clients to avoid syncing this information from the P2P network - the P2P network is then used to "top up" the client with the most recent data. They can be freely shared in the community via whatever means (http, torrent, etc) and serve as a permanent cold store of consensus data (and, after the merge, execution data) for history buffs and bean counters alike. This PR gently introduces support for loading blocks and states in two cases: block requests from rest/p2p and frontfilling when doing checkpoint sync. The era files are used as a secondary source if the information is not found in the database - compared to the database, there are a few key differences: * the database stores the block indexed by block root while the era file indexes by slot - the former is used only in rest, while the latter is used both by p2p and rest. * when loading blocks from era files, the root is no longer trivially available - if it is needed, it must either be computed (slow) or cached (messy) - the good news is that for p2p requests, it is not needed * in era files, "framed" snappy encoding is used while in the database we store unframed snappy - for p2p2 requests, the latter requires recompression while the former could avoid it * front-filling is the process of using era files to replace backfilling - in theory this front-filling could happen from any block and front-fills with gaps could also be entertained, but our backfilling algorithm cannot take advantage of this because there's no (simple) way to tell it to "skip" a range. * front-filling, as implemented, is a bit slow (10s to load mainnet): we load the full BeaconState for every era to grab the roots of the blocks - it would be better to partially load the state - as such, it would also be good to be able to partially decompress snappy blobs * lookups from REST via root are served by first looking up a block summary in the database, then using the slot to load the block data from the era file - however, there needs to be an option to create the summary table from era files to fully support historical queries To test this, `ncli_db` has an era file exporter: the files it creates should be placed in an `era` folder next to `db` in the data directory. What's interesting in particular about this setup is that `db` remains as the source of truth for security purposes - it stores the latest synced head root which in turn determines where a node "starts" its consensus participation - the era directory however can be freely shared between nodes / people without any (significant) security implications, assuming the era files are consistent / not broken. There's lots of future improvements to be had: * we can drop the in-memory `BlockRef` index almost entirely - at this point, resident memory usage of Nimbus should drop to a cool 500-600 mb * we could serve era files via REST trivially: this would drop backfill times to whatever time it takes to download the files - unlike the current implementation that downloads block by block, downloading an era at a time almost entirely cuts out request overhead * we can "reasonably" recreate detailed state history from almost any point in time, turning an O(slot) process into O(1) effectively - we'll still need caches and indices to do this with sufficient efficiency for the rest api, but at least it cuts the whole process down to minutes instead of hours, for arbitrary points in time * CI: ignore failures with Nim-1.6 (temporary) * test fixes Co-authored-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
2022-03-23 08:58:17 +00:00
when isMainModule:
# Testing EraDB gets messy because of the large amounts of data involved:
# this snippet contains some sanity checks for mainnet at least
import
os,
stew/arrayops
let
dbPath =
if os.paramCount() == 1: os.paramStr(1)
else: "era"
db = EraDB.new(
defaultRuntimeConfig, dbPath,
Eth2Digest(
data: array[32, byte].initCopyFrom([byte 0x4b, 0x36, 0x3d, 0xb9])))
historical_roots = [
Eth2Digest(
data: array[32, byte].initCopyFrom([byte 0x40, 0xcf, 0x2f, 0x3c]))]
var got8191 = false
var slot4: Eth2Digest
for bid in db.getBlockIds(historical_roots, Era(0)):
if bid.slot == Slot(1):
doAssert bid.root == Eth2Digest.fromHex(
"0xbacd20f09da907734434f052bd4c9503aa16bab1960e89ea20610d08d064481c")
elif bid.slot == Slot(4):
slot4 = bid.root
elif bid.slot == Slot(5) and bid.root != slot4:
raiseAssert "this slot was skipped, should have same root"
elif bid.slot == Slot(8191):
doAssert bid.root == Eth2Digest.fromHex(
"0x48ea23af46320b0290eae668b0c3e6ae3e0534270f897db0e83a57f51a22baca")
got8191 = true
doAssert db.getBlock(
historical_roots, Slot(1), Opt[Eth2Digest].err(),
phase0.TrustedSignedBeaconBlock).get().root ==
Eth2Digest.fromHex(
"0xbacd20f09da907734434f052bd4c9503aa16bab1960e89ea20610d08d064481c")
doAssert got8191