Nimbus: an Ethereum Execution Client for Resource-Restricted Devices https://status-im.github.io/nimbus-eth1/
Go to file
Jordan Hrycaj 91e24e3581
collected wisdom after working with hive/docker (#669)
2021-05-18 16:38:35 +01:00
.github/workflows CI: Skip GitHub actions for `hive_integration` files 2021-04-27 21:43:51 +03:00
.vscode vscode: add default build task 2018-08-22 21:43:22 -06:00
doc Update Nimbus - An Ethereum 2.0 Sharding Client_xt.md 2018-05-28 10:44:12 -07:00
docker first step into hive integration, fixes Dockerfile 2021-02-14 18:26:46 +07:00
examples Nimbus-Grafana-dashboard.json: gauge panel fix 2019-10-02 19:02:06 +02:00
hive_integration collected wisdom after working with hive/docker (#669) 2021-05-18 16:38:35 +01:00
nimbus add more query fields and resolvers to graphql api 2021-05-18 07:32:03 +07:00
nix Remove -linkshared & update Nix file to be consistent 2019-11-27 11:06:58 +01:00
premix eip2718: test_blockchain_json pass test 2021-05-15 18:09:35 +07:00
stateless fixes path pointing to eth_tests 2021-01-06 21:45:48 +07:00
tests add more query fields and resolvers to graphql api 2021-05-18 07:32:03 +07:00
vendor bump nim-eth submodule 2021-05-17 11:14:33 +07:00
wrappers Bump nim-eth and nim-chronos and fix exception effects 2021-04-02 19:55:21 +02:00
.appveyor.yml Remove wakunode and waku rpc code from repository 2020-05-07 20:49:14 +03:00
.gitignore CI: use MSYS2 on Windows 2021-04-09 17:19:40 +07:00
.gitmodules add submodules: graphql and toml-serialization 2021-04-22 11:29:42 +07:00
.travis.yml Remove wakunode and waku rpc code from repository 2020-05-07 20:49:14 +03:00
BlockchainTests.md fixes EIP2929 CALL opCode 2021-01-14 23:22:28 +07:00
GeneralStateTests.md fixes EIP2929 CALL opCode 2021-01-14 23:22:28 +07:00
LICENSE-APACHEv2 Update README badges and add dual-license header 2018-04-06 16:52:10 +02:00
LICENSE-MIT Update README badges and add dual-license header 2018-04-06 16:52:10 +02:00
Makefile provide experimental op handler switch -d:lowmem:1 for low memory C compiler 2021-04-28 15:24:14 +03:00
PersistBlockTests.md Add PersistBlockTest for block 1352922, fixes #363 2019-08-14 20:56:57 +02:00
PrecompileTests.md update tests logs 2021-05-17 11:14:33 +07:00
README.md provide experimental op handler switch -d:lowmem:1 for low memory C compiler 2021-04-28 15:24:14 +03:00
TracerTests.md update test logs 2019-01-06 14:27:06 +01:00
TransactionTests.md update tx tests json fixtures 2020-02-20 09:02:20 +02:00
azure-pipelines.yml Nim-1.2.6-RC1 (#524) 2020-07-30 14:10:22 +02:00
config.nims Limit stack size on Windows like other targets 2021-04-30 01:00:31 +01:00
default.nix Add nix recipe to build Nimbus wrappers 2019-11-19 11:02:00 +00:00
env.sh bump submodules 2019-08-24 21:12:43 +02:00
newBlockchainTests.md update tests logs 2021-05-17 11:14:33 +07:00
newGeneralStateTests.md update tests logs 2021-05-17 11:14:33 +07:00
nimbus.nimble Limit stack size on Windows like other targets 2021-04-30 01:00:31 +01:00
run-nimbus-sync Sync: Use stable nodekey/enode to accelerate sync testing 2021-04-29 21:25:26 +01:00
witnessBuilderBC.md update tests logs 2021-05-17 11:14:33 +07:00
witnessBuilderGST.md update tests logs 2021-05-17 11:14:33 +07:00

README.md

Nimbus: an Ethereum 2.0 Sharding Client for Resource-Restricted Devices

Build Status (Azure Pipelines) Build Status (Travis) License: Apache License: MIT Stability: experimental Github action

Discord: Nimbus Gitter: #status-im/nimbus Status: #nimbus-general

Rationale

Nimbus: an Ethereum 2.0 Sharding Client. The code in this repository is currently focusing on Ethereum 1.0 feature parity, while all 2.0 research and development is happening in parallel in nimbus-eth2.

Development Updates

To keep up to date with changes and development progress, follow the Nimbus blog.

Building & Testing

We currently do not guarantee that Nimbus will work on Windows.

Prerequisites

  • RocksDB
  • PCRE
  • GNU Make, Bash and the usual POSIX utilities. Git 2.9.4 or newer.

On Windows, a precompiled DLL collection download is available through the fetch-dlls Makefile target: (Windows instructions).

# MacOS with Homebrew
brew install rocksdb pcre

# Fedora
dnf install rocksdb-devel pcre pcre-devel

# Debian and Ubuntu
sudo apt-get install librocksdb-dev libpcre3-dev

# Arch (AUR)
pakku -S rocksdb pcre-static

rocksdb can also be installed by following their instructions.

Obtaining the prerequisites through the Nix package manager

Experimental

Users of the Nix package manager can install all prerequisites simply by running:

nix-shell default.nix

Build & Develop

POSIX-compatible OS

# The first `make` invocation will update all Git submodules.
# You'll run `make update` after each `git pull`, in the future, to keep those submodules up to date.
make nimbus

# See available command line options
build/nimbus --help

# Start syncing with mainnet
build/nimbus

# Update to latest version
git pull
make update

# Run tests
make test

To run a command that might use binaries from the Status Nim fork:

./env.sh bash # start a new interactive shell with the right env vars set
which nim
nim --version

# or without starting a new interactive shell:
./env.sh which nim
./env.sh nim --version

Our Wiki provides additional helpful information for debugging individual test cases and for pairing Nimbus with a locally running copy of Geth.

Windows

(Experimental support!)

Install Mingw-w64 for your architecture using the "MinGW-W64 Online Installer" (first link under the directory listing). Run it and select your architecture in the setup menu ("i686" on 32-bit, "x86_64" on 64-bit), set the threads to "win32" and the exceptions to "dwarf" on 32-bit and "seh" on 64-bit. Change the installation directory to "C:\mingw-w64" and add it to your system PATH in "My Computer"/"This PC" -> Properties -> Advanced system settings -> Environment Variables -> Path -> Edit -> New -> C:\mingw-w64\mingw64\bin (it's "C:\mingw-w64\mingw32\bin" on 32-bit)

Install Git for Windows and use a "Git Bash" shell to clone and build Nimbus.

If you don't want to compile RocksDB and SQLite separately, you can fetch pre-compiled DLLs with:

mingw32-make fetch-dlls # this will place the right DLLs for your architecture in the "build/" directory

You can now follow those instructions in the previous section by replacing make with mingw32-make (regardless of your 32-bit or 64-bit architecture):

mingw32-make nimbus # build the Nimbus binary
mingw32-make test # run the test suite
# etc.

Raspberry PI

Experimental The code can be compiled on a Raspberry PI:

  • Raspberry PI 3b+
  • 64gb SD Card (less might work too, but the default recommended 4-8GB will probably be too small)
  • Rasbian Buster Lite - Lite version is enough to get going and will save some disk space!

Assuming you're working with a freshly written image:


# Start by increasing swap size to 2gb:
sudo vi /etc/dphys-swapfile
# Set CONF_SWAPSIZE=2048
# :wq
sudo reboot

# Install prerequisites
sudo apt-get install git libgflags-dev libsnappy-dev

mkdir status
cd status

# Install rocksdb
git clone https://github.com/facebook/rocksdb.git
cd rocksdb
make shared_lib
sudo make install
cd..

# Raspberry pi doesn't include /usr/local/lib in library search path - need to add
export LD_LIBRARY_PATH=/usr/local/lib:$LD_LIBRARY_PATH

git clone https://github.com/status-im/nimbus.git

cd nimbus

# Follow instructions above!

Android

Experimental Code can be compiled and run on Android devices

Environment setup
  • Install the Termux app from FDroid or the Google Play store
  • Install a PRoot of your choice following the instructions for your preferred distribution. Note, the Ubuntu PRoot is known to contain all Nimbus prerequisites compiled on Arm64 architecture (common architecture for Android devices). Depending on the distribution, it may require effort beyond the scope of this guide to get all prerequisites.

Assuming Ubuntu PRoot is used

# Install prerequisites
apt install librocksdb-dev libpcre3-dev

# Clone repo and build Nimbus just like above
git clone https://github.com/status-im/nimbus.git

cd nimbus

make

make nimbus

build/nimbus

Experimental make variables

Apart from standard make flags (see link in the next chapter), the following make variables can be set to control which version of a virtual engine is compiled. The variables are listed with decreasing priority (in case of doubt, the lower prioritised variable is ignored when the higher on is available.)

  • ENABLE_EVMC=1
    Enable mostly EVMC compliant wrapper around the native nim VM

  • ENABLE_VM2LOWMEM=1
    Enable new re-factored version of the native nim VM. This version is not optimised and coded in a way so that low memory compilers can handle it (observed on 32 bit windows 7.)

  • ENABLE_VM2=1
    Enable new re-factored version of the native nim VM.

For these variables, using <variable>=0 is ignored and <variable>=2 has the same effect as <variable>=1 (ditto for other numbers.)

Development tips

Interesting Make variables and targets are documented in the nimbus-build-system repo.

  • you can switch the DB backend with a Nim compiler define: -d:nimbus_db_backend=... where the (case-insensitive) value is one of "rocksdb" (the default), "sqlite", "lmdb"

  • the Premix debugging tools are documented separately

  • you can control the Makefile's verbosity with the V variable (defaults to 0):

make V=1 # verbose
make V=2 test # even more verbose
make LOG_LEVEL=DEBUG nimbus # this is the default
make LOG_LEVEL=TRACE nimbus # log everything
  • pass arbitrary parameters to the Nim compiler:
make NIMFLAGS="-d:release"
  • if you want to use SSH keys with GitHub (also handles submodules):
make github-ssh
  • force a Nim compiler rebuild:
rm vendor/Nim/bin/nim
make -j8 build-nim

Git submodule workflow

Working on a dependency:

cd vendor/nim-chronicles
git checkout -b mybranch
# make some changes
git status
git commit -a
git push origin mybranch
# create a GitHub PR and wait for it to be approved and merged
git checkout master
git pull
git branch -d mybranch
# realise that the merge was done without "--no-ff"
git branch -D mybranch
# update the submodule's commit in the superproject
cd ../..
git status
git add vendor/nim-chronicles
git commit

It's important that you only update the submodule commit after it's available upstream.

You might want to do this on a new branch of the superproject, so you can make a GitHub PR for it and see the CI test results.

Don't update all Git submodules at once, just because you found the relevant Git command or make target. You risk updating submodules to other people's latest commits when they are not ready to be used in the superproject.

Adding the submodule "https://github.com/status-im/foo" to "vendor/foo":

vendor/nimbus-build-system/scripts/add_submodule.sh status-im/foo
# or
./env.sh add_submodule status-im/foo
# want to place it in "vendor/bar" instead?
./env.sh add_submodule status-im/foo vendor/bar

Removing the submodule "vendor/bar":

git submodule deinit -f -- vendor/bar
git rm -f vendor/bar

Checking out older commits, either to bisect something or to reproduce an older build:

git checkout <commit hash here>
make clean
make -j8 update

Running a dependency's test suite using nim instead of nimble (which cannot be convinced not to run a dependency check, thus clashing with our jury-rigged "vendor/.nimble/pkgs"):

cd vendor/nim-rocksdb
../nimbus-build-system/scripts/nimble.sh test
# or
../../env.sh nimble test

Metric visualisation

Install Prometheus and Grafana. On Gentoo, it's emerge prometheus grafana-bin.

# build Nimbus
make nimbus
# the Prometheus daemon will create its data dir in the current dir, so give it its own directory
mkdir ../my_metrics
# copy the basic config file over there
cp -a examples/prometheus.yml ../my_metrics/
# start Prometheus in a separate terminal
cd ../my_metrics
prometheus --config.file=prometheus.yml # loads ./prometheus.yml, writes metric data to ./data
# start a fresh Nimbus sync and export metrics
rm -rf ~/.cache/nimbus/db; ./build/nimbus --prune:archive --metricsServer

Start the Grafana server. On Gentoo it's /etc/init.d/grafana start. Go to http://localhost:3000, log in with admin:admin and change the password.

Add Prometheus as a data source. The default address of http://localhost:9090 is OK, but Grafana 6.3.5 will not apply that semitransparent default you see in the form field, unless you click on it.

Create a new dashboard. Click on its default title in the upper left corner ("New Dashboard"). In the new page, click "Import dashboard" in the right column and upload "examples/Nimbus-Grafana-dashboard.json".

In the main panel, there's a hidden button used to assign metrics to the left or right Y-axis - it's the coloured line on the left of the metric name, in the graph legend.

To see a single metric, click on its name in the legend. Click it again to go back to the combined view. To edit a panel, click on its title and select "Edit".

Obligatory screenshot.

Troubleshooting

Report any errors you encounter, please, if not already documented!

  • Turn it off and on again:
make clean
make update

License

Licensed and distributed under either of

or

at your option. These files may not be copied, modified, or distributed except according to those terms.