nimbus-eth1/nimbus/opcode_values.nim

# Nimbus
# Copyright (c) 2018 Status Research & Development GmbH
# Licensed under either of
#  * Apache License, version 2.0, ([LICENSE-APACHE](LICENSE-APACHE) or http://www.apache.org/licenses/LICENSE-2.0)
#  * MIT license ([LICENSE-MIT](LICENSE-MIT) or http://opensource.org/licenses/MIT)
# at your option. This file may not be copied, modified, or distributed except according to those terms.

import ./utils/macros_gen_opcodes

fill_enum_holes:
  type
    # Yellow Paper Appendix H - https://ethereum.github.io/yellowpaper/paper.pdf
    # Special notes from Yellow Paper:
    #   - Signed values are treated as two’s complement signed 256-bit integers.
    #   - When −2^255 is negated, there is an overflow
    #   - For addmod and mulmod, intermediate computations are not subject to the 2^256 modulo.
    #     Nimbus authors note:
    #        - This means that we can't naively do (Uint256 + Uint256) mod uint256,
    #          because the intermediate sum (or multiplication) might roll over if
    #          intermediate result is greater or equal 2^256

    Op* {.pure.} = enum
      # 0s: Stop and Arithmetic Operations
      Stop =           0x00, # Halts execution.
      Add =            0x01, # Addition operation.
      Mul =            0x02, # Multiplication operation.
      Sub =            0x03, # Subtraction operation.
      Div =            0x04, # Integer division operation.
      Sdiv =           0x05, # Signed integer division operation (truncated).
      Mod =            0x06, # Modulo remainder operation.
      Smod =           0x07, # Signed modulo remainder operation.
      Addmod =         0x08, # Modulo addition operation.
      Mulmod =         0x09, # Modulo multiplication operation.
      Exp =            0x0A, # Exponential operation
      SignExtend =     0x0B, # Extend length of two’s complement signed integer.

      # 10s: Comparison & Bitwise Logic Operations
      Lt =             0x10, # Less-than comparison.
      Gt =             0x11, # Greater-than comparison.
      Slt =            0x12, # Signed less-than comparison.
      Sgt =            0x13, # Signed greater-than comparison.
      Eq =             0x14, # Equality comparison.
      IsZero =         0x15, # Simple not operator. (Note: real Yellow Paper description)
      And =            0x16, # Bitwise AND operation.
      Or =             0x17, # Bitwise OR operation.
      Xor =            0x18, # Bitwise XOR operation.
      Not =            0x19, # Bitwise NOT operation.
      Byte =           0x1A, # Retrieve single byte from word.

      # 20s: SHA3
      Sha3 =           0x20, # Compute Keccak-256 hash.

      # 30s: Environmental Information
      Address =        0x30, # Get address of currently executing account.
      Balance =        0x31, # Get balance of the given account.
      Origin =         0x32, # Get execution origination address.
      Caller =         0x33, # Get caller address.
      CallValue =      0x34, # Get deposited value by the instruction/transaction responsible for this execution.
      CallDataLoad =   0x35, # Get input data of current environment.
      CallDataSize =   0x36, # Get size of input data in current environment.
      CallDataCopy =   0x37, # Copy input data in current environment to memory.
      CodeSize =       0x38, # Get size of code running in current environment.
      CodeCopy =       0x39, # Copy code running in current environment to memory.
      GasPrice =       0x3a, # Get price of gas in current environment.
      ExtCodeSize =    0x3b, # Get size of an account's code
      ExtCodeCopy =    0x3c, # Copy an account's code to memory.
      ReturnDataSize = 0x3d, # Get size of output data from the previous call from the current environment.
      ReturnDataCopy = 0x3e, # Copy output data from the previous call to memory.

      # 40s: Block Information
      Blockhash =      0x40, # Get the hash of one of the 256 most recent complete blocks.
      Coinbase =       0x41, # Get the block's beneficiary address.
      Timestamp =      0x42, # Get the block's timestamp.
      Number =         0x43, # Get the block's number.
      Difficulty =     0x44, # Get the block's difficulty.
      GasLimit =       0x45, # Get the block's gas limit.

      # 50s: Stack, Memory, Storage and Flow Operations
      Pop =            0x50, # Remove item from stack.
      Mload =          0x51, # Load word from memory.
      Mstore =         0x52, # Save word to memory.
      Mstore8 =        0x53, # Save byte to memory.
      Sload =          0x54, # Load word from storage.
      Sstore =         0x55, # Save word to storage.
      Jump =           0x56, # Alter the program counter.
      JumpI =          0x57, # Conditionally alter the program counter.
      Pc =             0x58, # Get the value of the program counter prior to the increment corresponding to this instruction.
      Msize =          0x59, # Get the size of active memory in bytes.
      Gas =            0x5a, # Get the amount of available gas, including the corresponding reduction for the cost of this instruction.
      JumpDest =       0x5b, # Mark a valid destination for jumps. This operation has no effect on machine state during execution.

      # 60s & 70s: Push Operations.
      Push1 =          0x60, # Place 1-byte item on stack.
      Push2 =          0x61, # Place 2-byte item on stack.
      Push3,
      Push4,
      Push5,
      Push6,
      Push7,
      Push8,
      Push9,
      Push10,
      Push11,
      Push12,
      Push13,
      Push14,
      Push15,
      Push16,
      Push17,
      Push18,
      Push19,
      Push20,
      Push21,
      Push22,
      Push23,
      Push24,
      Push25,
      Push26,
      Push27,
      Push28,
      Push29,
      Push30,
      Push31,
      Push32 =          0x7f, # Place 32-byte (full word) item on stack.

      # 80s: Duplication Operations
      Dup1 =           0x80, # Duplicate 1st stack item.
      Dup2 =           0x81, # Duplicate 2nd stack item.
      Dup3,
      Dup4,
      Dup5,
      Dup6,
      Dup7,
      Dup8,
      Dup9,
      Dup10,
      Dup11,
      Dup12,
      Dup13,
      Dup14,
      Dup15,
      Dup16 =          0x8f, # Duplicate 16th stack item.

      # 90s: Exchange Operations
      Swap1 =          0x90, # Exchange 1st and 2nd stack items.
      Swap2 =          0x91, # Exchange 1st and 3rd stack items.
      Swap3,
      Swap4,
      Swap5,
      Swap6,
      Swap7,
      Swap8,
      Swap9,
      Swap10,
      Swap11,
      Swap12,
      Swap13,
      Swap14,
      Swap15,
      Swap16 =         0x9f, # Exchange 1st and 17th stack items.

      # a0s: Logging Operations
      Log0 =           0xa0, # Append log record with no topics.
      Log1 =           0xa1, # Append log record with one topics.
      Log2,
      Log3,
      Log4 =           0xa4, # Append log record with four topics.

      # f0s: System operations
      Create =         0xf0, # Create a new account with associated code.
      Call =           0xf1, # Message-call into an account.
      CallCode =       0xf2, # Message-call into this account with an alternative account's code.
      Return =         0xf3, # Halt execution returning output data.
      DelegateCall =   0xf4, # Message-call into this account with an alternative account's code, but persisting the current values for sender and value.
      StaticCall =     0xfa, # Static message-call into an account.
      Revert =         0xfd, # Halt execution reverting state changes but returning data and remaining gas.
      Invalid =        0xfe, # Designated invalid instruction.
      SelfDestruct =   0xff  # Halt execution and register account for later deletion.