# Nimbus - Services available to EVM code that is run for a transaction # # Copyright (c) 2019-2023 Status Research & Development GmbH # Licensed under either of # * Apache License, version 2.0, ([LICENSE-APACHE](LICENSE-APACHE) or http://www.apache.org/licenses/LICENSE-2.0) # * MIT license ([LICENSE-MIT](LICENSE-MIT) or http://opensource.org/licenses/MIT) # at your option. This file may not be copied, modified, or distributed except according to those terms. #{.push raises: [].} import times, stint, chronicles, eth/common/eth_types, ../db/ledger, ../common/[evmforks, common], ".."/[vm_state, vm_computation, vm_internals, vm_gas_costs], ./host_types, ./host_trace, ./host_call_nested proc setupTxContext(host: TransactionHost) = # Conversion issues: # # `txContext.tx_gas_price` is 256-bit, but `vmState.txGasPrice` is 64-bit # signed (`GasInt`), and in reality it tends to be a fairly small integer, # usually < 16 bits. Our EVM truncates whatever it gets blindly to 64-bit # anyway. Largest ever so far may be 100,000,000. # https://medium.com/amberdata/most-expensive-transaction-in-ethereum-blockchain-history-99d9a30d8e02 # # `txContext.block_number` is 64-bit signed. This is actually too small for # the Nimbus `BlockNumber` type which is 256-bit (for now), so we truncate # the other way. # # `txContext.chain_id` is 256-bit, but `vmState.chaindb.config.chainId` is # 64-bit or 32-bit depending on the target CPU architecture (Nim `uint`). # Our EVM truncates whatever it gets blindly to 64-bit or 32-bit. # # No conversion required with the other fields: # # `txContext.tx_origin` and `txContext.block_coinbase` are 20-byte Ethereum # addresses, no issues with these. # # `txContext.block_timestamp` is 64-bit signed. `vmState.timestamp.toUnix` # is from Nim `std/times` and returns `int64` so this matches. (It's # overkill that we store a full seconds and nanoseconds object in # `vmState.timestamp` though.) # # `txContext.block_gas_limit` is 64-bit signed (EVMC assumes # [EIP-1985](https://eips.ethereum.org/EIPS/eip-1985) although it's not # officially accepted), and `vmState.gasLimit` is too (`GasInt`). # # `txContext.block_prev_randao` is 256-bit, and this one can genuinely take # values over much of the 256-bit range. let vmState = host.vmState host.txContext.tx_gas_price = vmState.txCtx.gasPrice.u256.toEvmc host.txContext.tx_origin = vmState.txCtx.origin.toEvmc # vmState.coinbase now unused host.txContext.block_coinbase = vmState.blockCtx.coinbase.toEvmc # vmState.blockNumber now unused host.txContext.block_number = (vmState.blockNumber .truncate(typeof(host.txContext.block_number))) # vmState.timestamp now unused host.txContext.block_timestamp = cast[int64](vmState.blockCtx.timestamp) # vmState.gasLimit now unused host.txContext.block_gas_limit = vmState.blockCtx.gasLimit # vmState.difficulty now unused host.txContext.chain_id = vmState.com.chainId.uint.u256.toEvmc host.txContext.block_base_fee = vmState.blockCtx.fee.get(0.u256).toEvmc if vmState.txCtx.versionedHashes.len > 0: type BlobHashPtr = typeof host.txContext.blob_hashes host.txContext.blob_hashes = cast[BlobHashPtr](vmState.txCtx.versionedHashes[0].addr) else: host.txContext.blob_hashes = nil host.txContext.blob_hashes_count= vmState.txCtx.versionedHashes.len.csize_t host.txContext.blob_base_fee = vmState.txCtx.blobBaseFee.toEvmc # Most host functions do `flip256` in `evmc_host_glue`, but due to this # result being cached, it's better to do `flip256` when filling the cache. host.txContext.tx_gas_price = flip256(host.txContext.tx_gas_price) host.txContext.chain_id = flip256(host.txContext.chain_id) host.txContext.block_base_fee = flip256(host.txContext.block_base_fee) host.txContext.blob_base_fee = flip256(host.txContext.blob_base_fee) # EIP-4399 # Transfer block randomness to difficulty OPCODE let difficulty = vmState.difficultyOrPrevRandao.toEvmc host.txContext.block_prev_randao = flip256(difficulty) host.cachedTxContext = true const use_evmc_glue = defined(evmc_enabled) # When using the EVMC binary interface, each of the functions below is wrapped # in another function that converts types to be compatible with the binary # interface, and the functions below are not called directly. The conversions # mostly just cast between byte-compatible types, so to avoid a redundant call # layer, make the functions below `{.inline.}` when wrapped in this way. when use_evmc_glue: {.push inline.} proc accountExists(host: TransactionHost, address: HostAddress): bool {.show.} = if host.vmState.fork >= FkSpurious: not host.vmState.readOnlyStateDB.isDeadAccount(address) else: host.vmState.readOnlyStateDB.accountExists(address) # TODO: Why is `address` an argument in `getStorage`, `setStorage` and # `selfDestruct`, if an EVM is only allowed to do these things to its own # contract account and the host always knows which account? proc getStorage(host: TransactionHost, address: HostAddress, key: HostKey): HostValue {.show.} = host.vmState.readOnlyStateDB.getStorage(address, key) proc setStorageStatus(host: TransactionHost, address: HostAddress, key: HostKey, newVal: HostValue): EvmcStorageStatus {.show.} = let db = host.vmState.readOnlyStateDB currentVal = db.getStorage(address, key) if currentVal == newVal: return EVMC_STORAGE_ASSIGNED host.vmState.mutateStateDB: db.setStorage(address, key, newVal) # https://eips.ethereum.org/EIPS/eip-1283 let originalVal = db.getCommittedStorage(address, key) if originalVal == currentVal: if originalVal.isZero: return EVMC_STORAGE_ADDED # !is_zero(original_val) if newVal.isZero: return EVMC_STORAGE_DELETED else: return EVMC_STORAGE_MODIFIED # originalVal != currentVal if originalVal.isZero.not: if currentVal.isZero: if originalVal == newVal: return EVMC_STORAGE_DELETED_RESTORED else: return EVMC_STORAGE_DELETED_ADDED # !is_zero(current_val) if newVal.isZero: return EVMC_STORAGE_MODIFIED_DELETED # !is_zero(new_val) if originalVal == newVal: return EVMC_STORAGE_MODIFIED_RESTORED else: return EVMC_STORAGE_ASSIGNED # is_zero(original_val) if originalVal == newVal: return EVMC_STORAGE_ADDED_DELETED else: return EVMC_STORAGE_ASSIGNED proc setStorage(host: TransactionHost, address: HostAddress, key: HostKey, newVal: HostValue): EvmcStorageStatus {.show.} = let status = setStorageStatus(host, address, key, newVal) fork = host.vmState.fork refund = SstoreCost[fork][status].gasRefund if refund != 0: # TODO: Refund depends on `Computation` at the moment. host.computation.gasMeter.refundGas(refund) status proc getBalance(host: TransactionHost, address: HostAddress): HostBalance {.show.} = host.vmState.readOnlyStateDB.getBalance(address) proc getCodeSize(host: TransactionHost, address: HostAddress): HostSize {.show.} = # TODO: Check this `HostSize`, it was copied as `uint` from other code. # Note: Old `evmc_host` uses `getCode(address).len` instead. host.vmState.readOnlyStateDB.getCodeSize(address).HostSize proc getCodeHash(host: TransactionHost, address: HostAddress): HostHash {.show.} = let db = host.vmState.readOnlyStateDB # TODO: Copied from `Computation`, but check if that code is wrong with # `FkSpurious`, as it has different calls from `accountExists` above. if not db.accountExists(address) or db.isEmptyAccount(address): default(HostHash) else: db.getCodeHash(address) proc copyCode(host: TransactionHost, address: HostAddress, code_offset: HostSize, buffer_data: ptr byte, buffer_size: HostSize): HostSize {.show.} = # We must handle edge cases carefully to prevent overflows. `len` is signed # type `int`, but `code_offset` and `buffer_size` are _unsigned_, and may # have large values (deliberately if attacked) that exceed the range of `int`. # # Comparing signed and unsigned types is _unsafe_: A type-conversion will # take place which breaks the comparison for some values. So here we use # explicit type-conversions, always compare the same types, and always # convert towards the type that cannot truncate because preceding checks have # been used to reduce the possible value range. # # Note, when there is no code, `getCode` result is empty `seq`. It was `nil` # when the DB was first implemented, due to Nim language changes since then. var code: seq[byte] = host.vmState.readOnlyStateDB.getCode(address) var safe_len: int = code.len # It's safe to assume >= 0. if code_offset >= safe_len.HostSize: return 0 let safe_offset = code_offset.int safe_len = safe_len - safe_offset if buffer_size < safe_len.HostSize: safe_len = buffer_size.int if safe_len > 0: copyMem(buffer_data, code[safe_offset].addr, safe_len) return safe_len.HostSize proc selfDestruct(host: TransactionHost, address, beneficiary: HostAddress) {.show.} = host.vmState.mutateStateDB: let localBalance = db.getBalance(address) if host.vmState.fork >= FkCancun: # Zeroing contract balance except beneficiary # is the same address db.subBalance(address, localBalance) # Transfer to beneficiary db.addBalance(beneficiary, localBalance) db.selfDestruct6780(address) else: # Transfer to beneficiary db.addBalance(beneficiary, localBalance) db.selfDestruct(address) template call(host: TransactionHost, msg: EvmcMessage): EvmcResult = # `call` is special. The C stack usage must be kept small for deeply nested # EVM calls. To ensure small stack, `{.show.}` must be handled at # `host_call_nested`, not here, and this function must use `template` to # inline at Nim level (same for `callEvmcNested`). `{.inline.}` is not good # enough. Due to object return it ends up using a lot more stack. host.callEvmcNested(msg) proc getTxContext(host: TransactionHost): EvmcTxContext {.show.} = if not host.cachedTxContext: host.setupTxContext() return host.txContext proc getBlockHash(host: TransactionHost, number: HostBlockNumber): HostHash {.show.} = # TODO: Clean up the different messy block number types. host.vmState.getAncestorHash(number.toBlockNumber) proc emitLog(host: TransactionHost, address: HostAddress, data: ptr byte, data_size: HostSize, topics: ptr HostTopic, topics_count: HostSize) {.show.} = var log: Log # Note, this assumes the EVM ensures `data_size` and `topics_count` cannot be # unreasonably large values. Largest `topics_count` should be 4 according to # EVMC documentation, but we won't restrict it here. if topics_count > 0: let topicsArray = cast[ptr UncheckedArray[HostTopic]](topics) let count = topics_count.int log.topics = newSeq[Topic](count) for i in 0 ..< count: log.topics[i] = topicsArray[i] if (data_size > 0): log.data = newSeq[byte](data_size.int) copyMem(log.data[0].addr, data, data_size.int) log.address = address host.vmState.stateDB.addlogEntry(log) proc accessAccount(host: TransactionHost, address: HostAddress): EvmcAccessStatus {.show.} = host.vmState.mutateStateDB: if not db.inAccessList(address): db.accessList(address) return EVMC_ACCESS_COLD else: return EVMC_ACCESS_WARM proc accessStorage(host: TransactionHost, address: HostAddress, key: HostKey): EvmcAccessStatus {.show.} = host.vmState.mutateStateDB: if not db.inAccessList(address, key): db.accessList(address, key) return EVMC_ACCESS_COLD else: return EVMC_ACCESS_WARM proc getTransientStorage(host: TransactionHost, address: HostAddress, key: HostKey): HostValue {.show.} = host.vmState.readOnlyStateDB.getTransientStorage(address, key) proc setTransientStorage(host: TransactionHost, address: HostAddress, key: HostKey, newVal: HostValue) {.show.} = host.vmState.mutateStateDB: db.setTransientStorage(address, key, newVal) when use_evmc_glue: {.pop: inline.} const included_from_host_services = true include ./evmc_host_glue else: export accountExists, getStorage, storage, getBalance, getCodeSize, getCodeHash, copyCode, selfDestruct, getTxContext, call, getBlockHash, emitLog