The reverse slot hash mechanism causes quite a bit of database traffic
but is broadly not useful except for iterating the storage of an
account, something that a validator never does (it's used by the
tracers).
This flag adds one more thing that is not stored in the database, to be
explored more comprehensively when designing full, validator and archive
modes with different pruning options in the future.
`ldb` says this is 60gb of data (!):
```
ldb --db=. --ignore_unknown_options --column_family=KvtGen approxsize
--hex --from=0x05
--to=0x05ffffffffffffffffffffffffffffffffffffffffffffff
66488353954
```
* Move snap un-dumpers to aristo unit test folder
why:
The only place where it is used, now to test the database against
legacy snap sync dump samples.
While the details of the dumped data have mostly outlived their purpuse,
its use as **entropy** data thrown against `Aristo` has still been
useful to find/debug tricky DB problems.
* Remove cruft
* `nimbus-eth1-blobs` not used anymore as test data source
* Extract sub-tree deletion functions into separate sub-modules
* Move/rename `aristo_desc.accLruSize` => `aristo_constants.ACC_LRU_SIZE`
* Lazily delete sub-trees
why:
This gives some control of the memory used to keep the deleted vertices
in the cached layers. For larger sub-trees, keys and vertices might be
on the persistent backend to a large extend. This would pull an amount
of extra information from the backend into the cached layer.
For lazy deleting it is enough to remember sub-trees by a small set of
(at most 16) sub-roots to be processed when storing persistent data.
Marking the tree root deleted immediately allows to let most of the code
base work as before.
* Comments and cosmetics
* No need to import all for `Aristo` here
* Kludge to make `chronicle` usage in sub-modules work with `fluffy`
why:
That `fluffy` would not run with any logging in `core_deb` is a problem
I have known for a while. Up to now, logging was only used for debugging.
With the current `Aristo` PR, there are cases where logging might be
wanted but this works only if `chronicles` runs without the
`json[dynamic]` sinks.
So this should be re-visited.
* More of a kludge
* Provide portal proof functions in `aristo_api`
why:
So it can be fully supported by `CoreDb`
* Fix prototype in `kvt_api`
* Fix node constructor for account leafs with storage trees
* Provide simple path check based on portal proof functionality
* Provide portal proof functionality in `CoreDb`
* Update TODO list
* Extracted `test_tx.testTxMergeProofAndKvpList()` => separate file
* Fix serialiser
why:
Typo lead to duplicate rlp-encoded nodes in chain
* Remove cruft
* Implemnt portal proof nodes generators `partXxxTwig()`
* Add unit test for portal proof nodes generator `partAccountTwig()`
* Cosmetics
* Simplify serialiser return code format
* Fix proof generator for extension nodes
why:
Code was simply bonkers, not detected before the unit tests were
adapted to check for just this.
* Implemented portal proof nodes verifier `partUntwig()`
* Cosmetics
* Fix `testutp` cli poblem
* Implement partial trees
why:
This is currently needed for unit tests to pre-load the database
with test data similar to `proof` node pre-load.
The basic features for `snap-sync` boundary proofs are available
as well for future use. What is missing is the final proof verification
and a complete storage data load/merge function (stub is available.)
* Cosmetics, clean up
* Aristo: Merge `delta_siblings` module into `deltaPersistent()`
* Aristo: Add `isEmpty()` for canonical checking whether a layer is empty
* Aristo: Merge `LayerDeltaRef` into `LayerObj`
why:
No need to maintain nested object refs anymore. Previously the
`LayerDeltaRef` object had a companion `LayerFinalRef` which held
non-delta layer information.
* Kvt: Merge `LayerDeltaRef` into `LayerRef`
why:
No need to maintain nested object refs (as with `Aristo`)
* Kvt: Re-write balancer logic similar to `Aristo`
why:
Although `Kvt` was a cheap copy of `Aristo` it sort of got out of
sync and the balancer code was wrong.
* Update iterator over forked peers
why:
Yield additional field `isLast` indicating that the last iteration
cycle was approached.
* Optimise balancer calculation.
why:
One can often avoid providing a new object containing the merge of two
layers for the balancer. This avoids copying tables. In some cases this
is replaced by `hasKey()` look ups though. One uses one of the two
to combine and merges the other into the first.
Of course, this needs some checks for making sure that none of the
components to merge is eventually shared with something else.
* Fix copyright year
* Remove `chunkedMpt` from `persistent()`/`stow()` function
why:
Proof-mode code was removed with PR #2445 and needs to be re-designed.
* Remove unused `beStateRoot` argument from `deltaMerge()`
* Update/drastically simplify `txStow()`
why:
Got rid of many boundary conditions
details:
Many pre-conditions have changed. In particular, previous versions
used the account state (hash) which was conveniently available and
checked it against the backend in order to find out whether there
was something to do, at all. Currently, only an empty set of all
tables in the delta layer has the balancer update ignored.
Notable changes are:
* no check against account state (see above)
* balancer filters have no hash signature (some legacy stuff left over
from journals)
* no (shap sync) proof data which made the generation of the a top layer
more complex
* Cosmetics, cruft removal
* Update unit test file & function name
why:
Was legacy module
Our need is only a baseline tx pool gasLimit calculator.
If need we can expand it in the future.
But for now, a simple but understandable tx pool is more important.
* Imported/rebase from `no-ext`, PR #2485
Store extension nodes together with the branch
Extension nodes must be followed by a branch - as such, it makes sense
to store the two together both in the database and in memory:
* fewer reads, writes and updates to traverse the tree
* simpler logic for maintaining the node structure
* less space used, both memory and storage, because there are fewer
nodes overall
There is also a downside: hashes can no longer be cached for an
extension - instead, only the extension+branch hash can be cached - this
seems like a fine tradeoff since computing it should be fast.
TODO: fix commented code
* Fix merge functions and `toNode()`
* Update `merkleSignCommit()` prototype
why:
Result is always a 32bit hash
* Update short Merkle hash key generation
details:
Ethereum reference MPTs use Keccak hashes as node links if the size of
an RLP encoded node is at least 32 bytes. Otherwise, the RLP encoded
node value is used as a pseudo node link (rather than a hash.) This is
specified in the yellow paper, appendix D.
Different to the `Aristo` implementation, the reference MPT would not
store such a node on the key-value database. Rather the RLP encoded node value is stored instead of a node link in a parent node
is stored as a node link on the parent database.
Only for the root hash, the top level node is always referred to by the
hash.
* Fix/update `Extension` sections
why:
Were commented out after removal of a dedicated `Extension` type which
left the system disfunctional.
* Clean up unused error codes
* Update unit tests
* Update docu
---------
Co-authored-by: Jacek Sieka <jacek@status.im>
The Vertex type unifies branches, extensions and leaves into a single
memory area where the larges member is the branch (128 bytes + overhead) -
the payloads we have are all smaller than 128 thus wrapping them in an
extra layer of `ref` is wasteful from a memory usage perspective.
Further, the ref:s must be visited during the M&S phase of garbage
collection - since we keep millions of these, many of them
short-lived, this takes up significant CPU time.
```
Function CPU Time: Total CPU Time: Self Module Function (Full) Source File Start Address
system::markStackAndRegisters 10.0% 4.922s nimbus system::markStackAndRegisters(var<system::GcHeap>).constprop.0 gc.nim 0x701230`
```
* Extract `CoreDb` constructor helpers from `base.nim` into separate module
why:
This makes it easier to avoid circular imports.
* Extract `Ledger` constructor helpers from `base.nim` into separate module
why:
Move `accounts_ledger.nim` file to sub-folder `backend`. That way the
layout resembles that of the `core_db`.
* Updates and corrections
* Extract `CoreDb` configuration from `base.nim` into separate module
why:
This makes it easier to avoid circular imports, in particular
when the capture journal (aka tracer) is revived.
* Extract `Ledger` configuration from `base.nim` into separate module
why:
This makes it easier to avoid circular imports (if any.)
also:
Move `accounts_ledger.nim` file to sub-folder `backend`. That way the
layout resembles that of the `core_db`.
* Rename `newKvt()` -> `ctx.getKvt()`
why:
Clean up legacy shortcut. Also, the `KVT` returned is not instantiated
but refers to the shared `KVT` that resides in a context which is a
generalisation of an in-memory database fork. The function `ctx`
retrieves the default context.
* Rename `newTransaction()` -> `ctx.newTransaction()`
why:
Clean up legacy shortcut. The transaction is applied to a context as a
generalisation of an in-memory database fork. The function `ctx`
retrieves the default context.
* Rename `getColumn(CtGeneric)` -> `getGeneric()`
why:
No more a list of well known sub-tries needed, a single one is enough.
In fact, `getColumn()` did only support a single sub-tree by now.
* Reduce TODO list
Introduce a new `StoData` payload type similar to `AccountData`
* slightly more efficient storage format
* typed api
* fewer seqs
* fix encoding docs - it wasn't rlp after all :)
The state and account MPT:s currenty share key space in the database
based on that vertex id:s are assigned essentially randomly, which means
that when two adjacent slot values from the same contract are accessed,
they might reside at large distance from each other.
Here, we prefix each vertex id by its root causing them to be sorted
together thus bringing all data belonging to a particular contract
closer together - the same effect also happens for the main state MPT
whose nodes now end up clustered together more tightly.
In the future, the prefix given to the storage keys can also be used to
perform range operations such as reading all the storage at once and/or
deleting an account with a batch operation.
Notably, parts of the API already supported this rooting concept while
parts didn't - this PR makes the API consistent by always working with a
root+vid.
* CoreDb: Merged all sub-descriptors into `base_desc` module
* Dissolve `aristo_db/common_desc.nim`
* No need to export `Aristo` methods in `CoreDb`
* Resolve/tighten methods in `aristo_db` sub-moduled
why:
So they can be straihgt implemented into the `base` module
* Moved/re-implemented `KVT` methods into `base` module
* Moved/re-implemented `MPT` methods into `base` module
* Moved/re-implemented account methods into `base` module
* Moved/re-implemented `CTX` methods into `base` module
* Moved/re-implemented `handler_{aristo,kvt}` into `aristo_db` module
* Moved/re-implemented `TX` methods into `base` module
* Moved/re-implemented base methods into `base` module
* Replaced `toAristoSavedStateBlockNumber()` by proper base method
why:
Was the last for keeping reason for keeping low level backend access
methods
* Remove dedicated low level access to `Aristo` backend
why:
Not needed anymore, for debugging the descriptors can be accessed
directly
also:
some clean up stuff
* Re-factor `CoreDb` descriptor layout and adjust base methods
* Moved/re-implemented iterators into `base_iterator*` modules
* Update docu
* Update some docu
* Resolve obsolete compile time option
why:
Not optional anymore
* Update checks
why:
The notion of what constitutes a valid `Aristo` db has changed due to
(even more) lazy calculating Merkle hash keys.
* Disable redundant unit test for production
* Use simpler schema when writing transactions, receipts, and withdrawals
Using MPT not only slow but also take up more spaces than needed.
Aristo will remove older tries and only keep the last block tries.
Using simpler schema will avoid those problems.
* Rename getTransaction to getTransactionByIndex
1. test_state_db and test_ledger -> test_ledger.
They are the same thing now.
2. stack, memory, code_stream, gas_meter, misc,
overflow -> test_evm_support.
They are small tests and fall into the same area.
* Remove `dirty` set from structural objects
why:
Not used anymore, the tree is dirty by default.
* Rename `aristo_hashify` -> `aristo_compute`
* Remove cruft, update comments, cosmetics, etc.
* Simplify `SavedState` object
why:
The key chaining have become obsolete after extra lazy hashing. There
is some available space for a state hash to be maintained in future.
details:
Accept the legacy `SavedState` object serialisation format for a
while (which will be overwritten by new format.)
* rebased from `github/on-demand-mpt`
ackn:
wip: on-demand mpt construction
Given that actual data is stored in the `Vertex` structure, it's useful
to think of the MPT as a cache for computing roots rather than being a
functional requirement on its own.
This PR engenders this line of thinking by incrementally computing the
MPT only when it's needed, ie when a state (or similar) root is needed.
This has the effect of siginficantly reducing memory usage as well as
improving performance:
* no need for dirty-mpt-node book-keeping
* no need to build complex forest of upcoming hashing work
* only hashes that are functionally needed are ever computed -
intermediate nodes whose MTP root is not observed are never computed /
processed
* Unit test hot fixes
* Unit test hot fixes cont.
(somehow lost that part)
---------
Co-authored-by: Jacek Sieka <jacek@status.im>
* Enable test_txpool by disabling failing cases
Because we cannot use goerli replay to feed the txpool anymore,
we use only a list of transactions.
But some test cases still failing because it requires block state
replay.
* Fix tx info
* Normalised storage tree addressing in function prototypes
detail:
Argument list is always `<db> <account-path> <slot-path> ..` with
both path arguments as `openArray[]`
* Remove cruft
* CoreDb internally Use full account paths rather than addresses
* Update API logging
* Use hashed account address only in prototypes
why:
This avoids unnecessary repeated hashing of the same account address.
The burden of doing that is upon the application. In the case here,
the ledger caches all kinds of stuff anyway so it is common sense to
exploit that for account address hashes.
caveat:
Using `openArray[byte]` argument types for hashed accounts is inherently
fragile. In non-release mode, a length verification `doAssert` is
enabled by default.
* No accPath in data record (use `AristoAccount` as `CoreDbAccount`)
* Remove now unused `eAddr` field from ledger `AccountRef` type
why:
Is duplicate of lookup key
* Avoid merging the account record/statement in the ledger twice.
* Tighten `CoreDb` API for accounts
why:
Apart from cruft, the way to fetch the accounts state root via a
`CoreDbColRef` record was unnecessarily complicated.
* Extend `CoreDb` API for accounts to cover storage tries
why:
In future, this will make the notion of column objects obsolete. Storage
trees will then be indexed by the account address rather than the vertex
ID equivalent like a `CoreDbColRef`.
* Apply new/extended accounts API to ledger and tests
details:
This makes the `distinct_ledger` module obsolete
* Remove column object constructors
why:
They were needed as an abstraction of MPT sub-trees including storage
trees. Now, storage trees are handled by the account (e.g. via address)
they belong to and all other trees can be identified by a constant well
known vertex ID. So there is no need for column objects anymore.
Still there are some left-over column object methods wnich will be
removed next.
* Remove `serialise()` and `PayloadRef` from default Aristo API
why:
Not needed. `PayloadRef` was used for unstructured/unknown payload
formats (account or blob) and `serialise()` was used for decodng
`PayloadRef`. Now it is known in advance what the payload looks
like.
* Added query function `hasStorageData()` whether a storage area exists
why:
Useful for supporting `slotStateEmpty()` of the `CoreDb` API
* In the `Ledger` replace `storage.stateEmpty()` by `slotStateEmpty()`
* On Aristo, hide the storage root/vertex ID in the `PayloadRef`
why:
The storage vertex ID is fully controlled by Aristo while the
`AristoAccount` object is controlled by the application. With the
storage root part of the `AristoAccount` object, there was a useless
administrative burden to keep that storage root field up to date.
* Remove cruft, update comments etc.
* Update changed MPT access paradigms
why:
Fixes verified proxy tests
* Fluffy cosmetics
web3-developer
Jacek Sieka
Jordan Hrycaj
andri lim
tersec