* Update docu
* Update Aristo/Kvt constructor prototype
why:
Previous version used an `enum` value to indicate what backend is to
be used. This was replaced by using the backend object type.
* Rewrite `hikeUp()` return code into `Result[Hike,(Hike,AristoError)]`
why:
Better code maintenance. Previously, the `Hike` object was returned. It
had an internal error field so partial success was also available on
a failure. This error field has been removed.
* Use `openArray[byte]` rather than `Blob` in functions prototypes
* Provide synchronised multi instance transactions
why:
The `CoreDB` object was geared towards the legacy DB which used a single
transaction for the key-value backend DB. Different state roots are
provided by the backend database, so all instances work directly on the
same backend.
Aristo db instances have different in-memory mappings (aka different
state roots) and the transactions are on top of there mappings. So each
instance might run different transactions.
Multi instance transactions are a compromise to converge towards the
legacy behaviour. The synchronised transactions span over all instances
available at the time when base transaction was opened. Instances
created later are unaffected.
* Provide key-value pair database iterator
why:
Needed in `CoreDB` for `replicate()` emulation
also:
Some update of internal code
* Extend API (i.e. prototype variants)
why:
Needed for `CoreDB` geared towards the legacy backend which has a more
basic API than Aristo.
* Reorg of distributed backend access
details:
Now handled via API provided in `aristo_desc`.
* Rename `checkCache()` => `checkTop()`
why:
Better naming for top layer cache checker
also:
Provide cascaded fifos checker
* Provide `eq` directive for finding filter by exact filter ID (think block number)
* Some code beautification (for better code reading)
* State root reposition and reorg
details:
Repositioning is supported by forking a new descriptor. Reorg is then
accomplished by writing this forked state on the backend database.
* Set scheduler state as part of the backend descriptor
details:
Moved type definitions `QidLayoutRef` and `QidSchedRef` to
`desc_structural.nim` so that it shares the same folder as
`desc_backend.nim`
* Automatic filter queue table initialisation in backend
details:
Scheduler can be tweaked or completely disabled
* Updated backend unit tests
details:
+ some code clean up/beautification, reads better now
+ disabled persistent filters so that there is no automated filter
management which will be implemented next
* Prettify/update unit tests source code
details:
Mostly replacing the `check()` paradigm by `xCheck()`
* Somewhat simplified backend type management
why:
Backend objects are labelled with a `BackendType` symbol where the
`BackendVoid` label is implicitly assumed for a `nil` backend object
reference.
To make it easier, a `kind()` function is used now applicable to
`nil` references as well.
* Fix DB storage layout for filter objects
why:
Need to store the filter ID with the object
* Implement reverse [] index on fifo
why:
An integer index argument on `[]` retrieves the QueueID (label) of the
fifo item while a QueueID argument on `[]` retrieves the index (so
it is inverse to the former variant).
* Provide iterator over filters as fifo
why:
This iterator goes along the cascased fifo structure (i.e. in
historical order)
* Add backwards index `[]` operator into fifo
also:
Need another maintenance instruction: The last overflow queue must
irrevocably delete some item in order to make space for a new one.
* Add re-org scheduler
details:
Generates instructions how to extract and merge some leading entries
* Add filter ID selector
details:
This allows to find the next filter now newer that a given filter ID
* Message update
* Rename FilterID => QueueID
why:
The current usage does not identify a particular filter but uses it as
storage tag to manage it on the database (to be organised in a set of
FIFOs or queues.)
* Split `aristo_filter` source into sub-files
why:
Make space for filter management API
* Store filter queue IDs in pairs on the backend
why:
Any pair will will describe a FIFO accessed by bottom/top IDs
* Reorg some source file names
why:
The "aristo_" prefix for make local/private files is tedious to
use, so removed.
* Implement filter slot scheduler
details:
Filters will be stored on the database on cascaded FIFOs. When a FIFO
queue is full, some filter items are bundled together and stored on the
next FIFO.
* Removed dedicated transcoder tests
why:
will implicitely be provided by other tests:
+ encode/write -> hashify -> test_tx
+ decode/read -> merge raw nodes -> test_tx
+ de/blobfiy -> backend operations, taext_tx, test_backend, test_filter
* Clarify how the vertex ID generator state is accessed from the backend
why:
This state is a list of unused vertex IDs. It was just stored somewhere
on the backend which details were exposed when iterating over some
sub-table(s).
As there will be more such single information records, an admin
sub-tables has been defined (formerly ID generator table) with dedicated
access keys and type. Also, the iterator over the single ID generator
state item has been removed. It must be accessed via the `get()`
interface.
* Remove trailing space from file name
why:
fixes windows bail out
* Remove concept of empty/blind filters
why:
Not needed. A non-existent filter is is coded as a nil reference.
* Slightly generalised backend iterators
why:
* VertexID as key for the ID generator state makes no sense
* there will be more tables addressed by non-VertexID keys
* Store serialised/blobified vertices on memory backend
why:
This is more in line with the RocksDB backend so more appropriate
for testing when comparing behaviour. For a speedy memory database,
a backend-less variant should be used.
* Drop the `Aristo` prefix from names `AristoLayerRef`, etc.
* Suppress compiler warning
why:
duplicate imports
* Add filter serialisation transcoder
why:
Will be used as storage format
* Fix hashing algorithm
why:
Particular case where a sub-tree is on the backend, linked by an
Extension vertex to the top level.
* Update backend verification to report `dirty` top layer
* Implement distributed merge of backend filters
* Implement distributed backend access management
details:
Implemented and tested as described in chapter 5 of the `README.md`
file.
* Renamed type `NoneBackendRef` => `VoidBackendRef`
* Clarify names: `BE=filter+backend` and `UBE=backend (unfiltered)`
why:
Most functions used full names as `getVtxUnfilteredBackend()` or
`getKeyBackend()`. After defining abbreviations (and its meaning) it
seems easier to use `getVtxUBE()` and `getKeyBE()`.
* Integrate `hashify()` process into transaction logic
why:
Is now transparent unless explicitly controlled.
details:
Cache changes imply setting a `dirty` flag which in turn triggers
`hashify()` processing in transaction and `pack()` directives.
* Removed `aristo_tx.exec()` directive
why:
Inconsistent implementation, functionality will be provided with a
different paradigm.
* Provide deep copy for each transaction layer
why:
Localising changes. Selective deep copy was just overlooked.
* Generalise vertex ID generator state reorg function `vidReorg()`
why:
makes it somewhat easier to handle when saving layers.
* Provide dummy back end descriptor `NoneBackendRef`
* Optional read-only filter between backend and transaction cache
why:
Some staging area for accumulating changes to the backend DB. This
will eventually be an access layer for emulating a backend with
multiple/historic state roots.
* Re-factor `persistent()` with filter between backend/tx-cache => `stow()`
why:
The filter provides an abstraction from the physically stored data on
disk. So, there can be several MPT instances using the same disk data
with different state roots. Of course, all the MPT instances should
not differ too much for practical reasons :).
TODO:
Filter administration tools need to be provided.
* Misc fixes
detail:
* Fix de-serialisation for account leafs
* Update node recovery from unit tests
* Remove `LegacyAccount` from `PayloadRef` object
why:
Legacy accounts use a hash key as storage root which is detrimental
to the working of the Aristo database which uses a vertex ID.
* Dissolve `hashify_helper` into `aristo_utils` and `aristo_transcode`
why:
Functions are of general interest so they should live in first level
code files.
* Added left/right iterators over leaf nodes
* Some helper/wrapper functions that might be useful
why:
For the main tree with root vertex ID 1, the leaf nodes hold the
account data. These accounts may link to sub trees the storage root
node ID of which must be registered here. There is no reverse key
lookup on the backend.
note:
These definitions are experimental. Also, there are some tests missing
for validating Payload data conversions.
* Slightly tighten some self-check conditions
* Redefined the database descriptor object as reference (to the object)
why:
The upcoming transaction wrapper will work with a database reference
rather than the object itself
* Append state before `save()` to the Aristo descriptor
why:
This stae was previously returned by the function. Appending it to
a field of the Aristo descriptor seems easier to handle.
* Fix missing branch checks in transcoder
why:
Symmetry problem. `Blobify()` allowed for encoding degenerate branch
vertices while `Deblobify()` rejected decoding wrongly encoded data.
* Update memory backend so that it rejects storing bogus vertices.
why:
Error behaviour made similar to the rocks DB backend.
* Make sure that leaf vertex IDs are not repurposed
why:
This makes it easier to record leaf node changes
* Update error return code for next()/right() traversal
why:
Returning offending vertex ID (besides error code) helps debugging
* Update Merkle hasher for deleted nodes
why:
Not implemented, yet
also:
Provide cache & backend consistency check functions. This was
partly re-implemented from `hashifyCheck()`
* Simplify some unit tests
* Fix delete function
why:
Was conceptually wrong
* Added missing deferred cleanup directive to sub-test functions
why:
Rocksdb keeps the files locked for a short while leading to errors. This
was previously solved my using different db sub-directories
* Provide vertex deep-copy function globally.
why:
is just handy
* Avoid unnecessary vertex caching when merging proof nodes
also:
Run all merge tests on the rocksdb backend
Previously, proof node tests were run without backend
* Fix vertex ID generator state handling for rocksdb backend
why:
* Key error in walk iterator
* Needs to be loaded when opening the database
* Use non-zero sub-table prefixes for rocksdb
why:
Handy for debugging
* Fix error code for missing key on rocksdb backend
why:
Previously returned `VOID_HASH_KEY` rather than `GetKeyNotFound`
* Explicitly copy vertex data between internal table and function/result argument
why:
Function argument or return reference may still refer to the same data
object.
* Updated error symbols
why:
Error symbol names for the hike module now start with the prefix `Hike`.
* Write back modified branch node into local top layer cache
why:
With the backend available, the source of the branch node references
might not be the top layer cache. So any change must be explicitely
recorded.
* Generalised Aristo DB constructor for any type of backend
details:
* Records to be deleted are represented as key-void (rather than
key-value) pairs by the put-function arguments
* Allow direct driver access, iterators as example implementation and
for testing.
* Provide backend storage interface
details:
Stores the top layer onto backend tables
* Implemented Rocks DB backend
details:
Transaction based `put()` functionality
Iterators (based on direct RocksDB access)
* Fix include
why:
Eth67 not default yet so that got missed
* Rename `LeafKey` => `LeafTie`
why:
Name is a pen picture of what this object is for. Also, it avoids the
ubiquitous term `key`.
* Provided `getOrVoid()` wrapper for `getOrDefault()`
also:
Provide `isValid()` syntactic sugar for `.isNil.not`, `!= 0` etc.
Reorg descriptor source, split into sub-sources
* Bundled `NodeKey` objects with root ID and called it `HashLabel`
why:
`NodeKey` (aka repurposed Hash265) objects are unique only within a
particular sub-trie (e.g. storage slots) which are kept separated
(i.e non-interleaved) by design. This is not applied to the backend
as the map VertexID->NodeKey labelling the nodes needs not be injective.
For the in-memory database (transaction) layers, the injective map
VertexID->(VertexID,NodeKey) is used where the first field of the image
tuple is the root ID of the sub-trie the `NodeKey` object is valid. So
identical storage tries for different accounts can be represented.
* Exclude some storage tests
why:
These test running on external dumps slipped through. The particular
dumps were reported earlier as somehow dodgy.
This was changed in `#1457` but having a second look, the change on
hexary_interpolate.nim(350) might be incorrect.
* Redesign `Aristo DB` descriptor for transaction based layers
why:
Previous descriptor layout made it cumbersome to push/pop
database delta layers.
The new architecture keeps each layer with the full delta set
relative to the database backend.
* Keep root ID as part of the `Patricia Trie` leaf path
why;
That way, forests are supported
* Keep vertex ID generator state with each db-layer
why:
The vertex ID generator state is part of the difference to the below
layer
* Move otherwise unused source to test directory
* Add Merkle hash generator
also:
* Verification facility for debugging
* Empty Merkle key hashes encoded as `EMPTY_ROOT_HASH`
details:
1. Merging a leaf vertex merges a `Patricia Trie` path (while
adding/modiying vertices) and adds a leaf node with payload
2. Merging a Merkel node merges a single vertex to the `Patricia Trie`
and registers merkel hashes
3. Action 2 can be used before action 1 in order to construct a
Merkel proof as required for handling `snap/1` data.
4. Unit tests show that action 3 is benign for now :)
* Cosmetics, renamed fields (eVtx, bVtx) -> (eVid, bVid)
* Multilayered delta architecture for Aristo DB
details:
Any VertexID or data retrieval needs to go down the rabbit hole and
fetch/get/manipulate the bottom layer -- even without explicit
backend.
* Direct reference to backend from top-level layer
why:
Some services as the vid management needs to be synchronised among all
layers. So access is optimised.
* Experimental MP-trie
why:
Deleting records is a infeasible with the current structure
* Added vertex ID recycling management
Todo:
Provide some unit tests
* DB layout update
why:
Main news is the separation of `Merkel` hashes into an extra table.
details:
The code fragments cover conversion between compact MPT records and
Aristo DB records as well as some rudimentary cache handling for
the `Merkel` hashes (i.e. the extra table entries.)
todo:
Add some simple unit test for the descriptor record (currently used
for vertex ID management, only.)
* Updated vertex ID recycling management
details:
added simple unit tests (mainly testing ABI)
* docu update
Jordan Hrycaj