`updateOk` is obsolete and always set to true - callers should not have
to care about this detail
also take the opportunity to clean up storage root naming
* switch to Nim v2.0.12
* fix LruCache capitalization for styleCheck
* KzgProof/KzgCommitment for styleCheck
* TxEip4844 for styleCheck
* styleCheck issues in nimbus/beacon/payload_conv.nim
* ENode for styleCheck
* isOk for styleCheck
* some more styleCheck fixes
* more styleCheck fixes
---------
Co-authored-by: jangko <jangko128@gmail.com>
This is a minimal set of changes to make things work with the new types
in nim-eth - this is the minimal PR that merely resolves
incompatibilities while the full change set would include more cleanup
and migration.
* bump metrics
* Remove cruft
* Cosmetics, update some logging, noise control
* Renamed `CoreDb` function `hasKey` => `hasKeyRc` and provided `hasKey`
why:
Currently, `hasKey` returns a `Result[]` rather than a `bool` which
is what one would expect from a function prototype of this name.
This was a bit of an annoyance and cost unnecessary attention.
* Provide portal proof functions in `aristo_api`
why:
So it can be fully supported by `CoreDb`
* Fix prototype in `kvt_api`
* Fix node constructor for account leafs with storage trees
* Provide simple path check based on portal proof functionality
* Provide portal proof functionality in `CoreDb`
* Update TODO list
* Update config for Ledger and CoreDb
why:
Prepare for tracer which depends on the API jump table (as well as
the profiler.) The API jump table is now enabled in unit/integration
test mode piggybacking on the `unittest2DisableParamFiltering`
compiler flag or on an extra compiler flag `dbjapi_enabled`.
* No deed for error field in `NodeRef`
why:
Was opnly needed by proof nodes pre-loader which will be re-implemented
* Cosmetics
* Extract `CoreDb` constructor helpers from `base.nim` into separate module
why:
This makes it easier to avoid circular imports.
* Extract `Ledger` constructor helpers from `base.nim` into separate module
why:
Move `accounts_ledger.nim` file to sub-folder `backend`. That way the
layout resembles that of the `core_db`.
* Updates and corrections
* Extract `CoreDb` configuration from `base.nim` into separate module
why:
This makes it easier to avoid circular imports, in particular
when the capture journal (aka tracer) is revived.
* Extract `Ledger` configuration from `base.nim` into separate module
why:
This makes it easier to avoid circular imports (if any.)
also:
Move `accounts_ledger.nim` file to sub-folder `backend`. That way the
layout resembles that of the `core_db`.
* Rename `newKvt()` -> `ctx.getKvt()`
why:
Clean up legacy shortcut. Also, the `KVT` returned is not instantiated
but refers to the shared `KVT` that resides in a context which is a
generalisation of an in-memory database fork. The function `ctx`
retrieves the default context.
* Rename `newTransaction()` -> `ctx.newTransaction()`
why:
Clean up legacy shortcut. The transaction is applied to a context as a
generalisation of an in-memory database fork. The function `ctx`
retrieves the default context.
* Rename `getColumn(CtGeneric)` -> `getGeneric()`
why:
No more a list of well known sub-tries needed, a single one is enough.
In fact, `getColumn()` did only support a single sub-tree by now.
* Reduce TODO list
* CoreDb: Merged all sub-descriptors into `base_desc` module
* Dissolve `aristo_db/common_desc.nim`
* No need to export `Aristo` methods in `CoreDb`
* Resolve/tighten methods in `aristo_db` sub-moduled
why:
So they can be straihgt implemented into the `base` module
* Moved/re-implemented `KVT` methods into `base` module
* Moved/re-implemented `MPT` methods into `base` module
* Moved/re-implemented account methods into `base` module
* Moved/re-implemented `CTX` methods into `base` module
* Moved/re-implemented `handler_{aristo,kvt}` into `aristo_db` module
* Moved/re-implemented `TX` methods into `base` module
* Moved/re-implemented base methods into `base` module
* Replaced `toAristoSavedStateBlockNumber()` by proper base method
why:
Was the last for keeping reason for keeping low level backend access
methods
* Remove dedicated low level access to `Aristo` backend
why:
Not needed anymore, for debugging the descriptors can be accessed
directly
also:
some clean up stuff
* Re-factor `CoreDb` descriptor layout and adjust base methods
* Moved/re-implemented iterators into `base_iterator*` modules
* Update docu
* Use simpler schema when writing transactions, receipts, and withdrawals
Using MPT not only slow but also take up more spaces than needed.
Aristo will remove older tries and only keep the last block tries.
Using simpler schema will avoid those problems.
* Rename getTransaction to getTransactionByIndex
* Normalised storage tree addressing in function prototypes
detail:
Argument list is always `<db> <account-path> <slot-path> ..` with
both path arguments as `openArray[]`
* Remove cruft
* CoreDb internally Use full account paths rather than addresses
* Update API logging
* Use hashed account address only in prototypes
why:
This avoids unnecessary repeated hashing of the same account address.
The burden of doing that is upon the application. In the case here,
the ledger caches all kinds of stuff anyway so it is common sense to
exploit that for account address hashes.
caveat:
Using `openArray[byte]` argument types for hashed accounts is inherently
fragile. In non-release mode, a length verification `doAssert` is
enabled by default.
* No accPath in data record (use `AristoAccount` as `CoreDbAccount`)
* Remove now unused `eAddr` field from ledger `AccountRef` type
why:
Is duplicate of lookup key
* Avoid merging the account record/statement in the ledger twice.
* Tighten `CoreDb` API for accounts
why:
Apart from cruft, the way to fetch the accounts state root via a
`CoreDbColRef` record was unnecessarily complicated.
* Extend `CoreDb` API for accounts to cover storage tries
why:
In future, this will make the notion of column objects obsolete. Storage
trees will then be indexed by the account address rather than the vertex
ID equivalent like a `CoreDbColRef`.
* Apply new/extended accounts API to ledger and tests
details:
This makes the `distinct_ledger` module obsolete
* Remove column object constructors
why:
They were needed as an abstraction of MPT sub-trees including storage
trees. Now, storage trees are handled by the account (e.g. via address)
they belong to and all other trees can be identified by a constant well
known vertex ID. So there is no need for column objects anymore.
Still there are some left-over column object methods wnich will be
removed next.
* Remove `serialise()` and `PayloadRef` from default Aristo API
why:
Not needed. `PayloadRef` was used for unstructured/unknown payload
formats (account or blob) and `serialise()` was used for decodng
`PayloadRef`. Now it is known in advance what the payload looks
like.
* Added query function `hasStorageData()` whether a storage area exists
why:
Useful for supporting `slotStateEmpty()` of the `CoreDb` API
* In the `Ledger` replace `storage.stateEmpty()` by `slotStateEmpty()`
* On Aristo, hide the storage root/vertex ID in the `PayloadRef`
why:
The storage vertex ID is fully controlled by Aristo while the
`AristoAccount` object is controlled by the application. With the
storage root part of the `AristoAccount` object, there was a useless
administrative burden to keep that storage root field up to date.
* Remove cruft, update comments etc.
* Update changed MPT access paradigms
why:
Fixes verified proxy tests
* Fluffy cosmetics
An instance of `CoreDbMptRef` is created for and stored in every account
- when we are processing blocks and have many accounts in memory, this
closure environment takes up hundreds of mb of memory (around block 5M,
it is the 4:th largest memory consumer!) - incidentally, this also
removes a circular reference in the setup that causes the
`AristoCodeDbMptRef` to linger in memory much longer than it
has to which is the core reason why it takes so much.
The real solution here is to remove the methods indirection entirely,
but this PR provides relief until that has been done.
Similar treatment is given to some of the other core api functions to
avoid circulars there too.
It is common for many accounts to share the same code - at the database
level, code is stored by hash meaning only one copy exists per unique
program but when loaded in memory, a copy is made for each account.
Further, every time we execute the code, it must be scanned for invalid
jump destinations which slows down EVM exeuction.
Finally, the extcodesize call causes code to be loaded even if only the
size is needed.
This PR improves on all these points by introducing a shared
CodeBytesRef type whose code section is immutable and that can be shared
between accounts. Further, a dedicated `len` API call is added so that
the EXTCODESIZE opcode can operate without polluting the GC and code
cache, for cases where only the size is requested - rocksdb will in this
case cache the code itself in the row cache meaning that lookup of the
code itself remains fast when length is asked for first.
With 16k code entries, there's a 90% hit rate which goes up to 99%
during the 2.3M attack - the cache significantly lowers memory
consumption and execution time not only during this event but across the
board.
* CoreDb: remove PHK tries
why:
There is no general use anymore for an MPT with a pre-hashed key. It
was used to resemble the `SecureHexaryTrie` logic from the legacy DB.
The only pace where this is needed is the `Leger` which uses a
a distinct MPT version anyway (see `distinct_ledgers.nim`.)
* Rename `CoreDx*` -> `CoreDb*`
why:
The naming `CoreDx*` was used to differentiate the new CoreDb API from
the legacy API which had descriptors named `CoreDb*`.
* Remove unused `merge*()` functions (for production)
details:
Some functionality moved to test suite
* Make sure that only `AccountData` leaf type is exactly used on VertexID(1)
* clean up payload type
* Provide dedicated functions for merging accounts and storage trees
why:
Storage trees are always linked to an account, so there is no need
for an application to fiddle about (e.e. creating, re-cycling) with
storage tree vertex IDs.
* CoreDb: Disable tracer functionality
why:
Must be updated to accommodate new/changed `Aristo` functions.
* CoreDb: Use new `mergeXXX()` functions
why:
Makes explicit vertex ID management obsolete for creating new
storage trees.
* Remove `mergePayload()` and other cruft from API, `aristo_merge`, etc.
* clean up merge functions
details:
The merge implementation `mergePayloadImpl()` does not need to be super
generic anymore as all the edge cases are covered by the specialised
functions `mergeAccountPayload()`, `mergeGenericData()`, and
`mergeStorageData()`.
* No tracer available at the moment, so disable offending tests
The state root computation here is one of the major hotspots in block
processing - in the cases the code only needs to know if it's empty or
not, it can be done a lot faster.
Adding a separate function for this looks fragile and should probably be
revisited.
* Fix initialiser
why:
Possible crash (app profiling, tracer etc.)
* Update column family options processing
why:
Same for kvt as for aristo
* Move `AristoDbDualRocks` backend type to the test suite
why:
So it is not available for production
* Fix typos in API jump table
why:
Used for tracing and app profiling only. Needed some update
* Purged CoreDb legacy API
why:
Not needed anymore, was transitionary and disabled.
* Rename `flush` argument to `eradicate` in a DB close context
why:
The word `eradicate` leaves no doubt what is meant
* Rename `stoFlush()` -> `stoDelete()`
* Rename `core_apps_newapi` -> `core_apps` (not so new anymore)
* Bump nim-eth, nim-web3, nimbus-eth2
- Replace std.Option with results.Opt
- Fields name changes
* More fixes
* Fix Portal stream async raises and portal testnet Opt usage
* Bump eth + nimbus-eth2 + more fixes related to eth_types changes
* Fix in utp test app and nimbus-eth2 bump
* Fix test_blockchain_json rebase conflict
* Fix EVMC block_timestamp conversion plus commentary
---------
Co-authored-by: kdeme <kim.demey@gmail.com>
* bump rockdb
* Rename `KVT` objects related to filters according to `Aristo` naming
details:
filter* => delta*
roFilter => balancer
* Compulsory error handling if `persistent()` fails
* Add return code to `reCentre()`
why:
Might eventually fail if re-centring is blocked. Some logic will be
added in subsequent patch sets.
* Add column families from earlier session to rocksdb in opening procedure
why:
All previously used CFs must be declared when re-opening an existing
database.
* Update `init()` and add rocksdb `reinit()` methods for changing parameters
why:
Opening a set column families (with different open options) must span
at least the ones that are already on disk.
* Provide write-trigger-event interface into `Aristo` backend
why:
This allows to save data from a guest application (think `KVT`) to
get synced with the write cycle so the guest and `Aristo` save all
atomically.
* Use `KVT` with new column family interface from `Aristo`
* Remove obsolete guest interface
* Implement `KVT` piggyback on `Aristo` backend
* CoreDb: Add separate `KVT`/`Aristo` backend mode for debugging
* Remove `rocks_db` import from `persist()` function
why:
Some systems (i.p `fluffy` and friends) use the `Aristo` memory
backend emulation and do not link against rocksdb when building the
application. So this should fix that problem.
* CoreDb: Remove crufty second/off-site KVT
why:
Was used to allow late `Clique` to store directly to disk
* CoreDb: Remove prune flag related functionality
why:
Is completely legacy stuff
* CoreDb: Remove dependence on legacy API (tests unsupported yet)
why:
Does not fully support Aristo
* Re-factoring `state_db` using new API
details:
Only minimum changes needed to compile `nimbus`
* Update tests and aux modules
* Turn off legacy API and remove `distinct_tries`
comment:
The legacy API has now cruft status, will be removed soon
* Fix copyright years
* Update rpc for verified proxy
---------
Co-authored-by: Jacek Sieka <jacek@status.im>
* Aristo: Allow to define/set `FilterID` for journal filter records
why:
After some changes, the `FilterID` is isomorphic to the `BlockNumber`
scalar (well, the first 2^64 entries of a `BlockNumber`.)
The needed change for `FilterID` is that the `FilterID(0)` value is
valid part of the `FilterID` scalar. A non-valid `FilterID` entry is
represented by `none(FilterID)`.
* Aristo: Split off function `persist()` as persistent version of `stow()`
why:
In production, `stow(persistent=false,..)` is currently unused. So,
using `persist()` rather than `stow(persistent=true,..)` improves
readability and is better to maintain.
* CoreDb+Aristo: Store block numbers in journal records
why:
This makes journal records searchable by block numbers
* Aristo: Rename some journal related functions
why:
The name *journal* is more appropriate to api functions than something
with *fifo* or *filter*.
* CoreDb+Aristo: Update last/oldest journal state retrieval
* CoreDb+Aristo: Register block number with state root in journal
why:
No need anymore for extra lookup table `stRootToBlockNum` which maps
a storage root -> block number.
* Aristo: Remove unused function `getFilUbe()` from api
* CoreDb: Remove now unused virtual table `stRootToBlockNum`
why:
Was used to map a state root to a block number. This functionality
is now embedded into the recovery journal backend.
* Turn of API tracking (will fail on `fluffy`)
* Code cosmetics
* Aristo+Kvt: Fix api wrappers
why:
Api setup killed the backend descriptor when backend mapping was
disabled.
* Aristo: Implement masked profiling entries
why:
Database backend should be listed but not counted in tally
* CoreDb: Simplify backend() methods
why:
DBMS backend access Was provided very early and over engineered. Now
there are only two backend machines, one for `Kvt` and the other one
for an `Mpt` available only via new API.
* CoreDb: Code cleanup regarding descriptor types
* CoreDb: Refactor/redefine `persistent()` methods
why:
There were `persistent()` methods for any type of caching storage
facilities `Kvt`, `Mpt`, `Phk`, and `Acc`. Now there is only a single
`persistent()` method storing all facilities in tandem (similar to
how transactions work.)
For non shared `Kvt` tables, there is now an extra storage method
`saveOffSite()`.
* CoreDb lingo update: `trie` becomes `column`
why:
Notion of a `trie` is pretty much hidden by the new `CoreDb` api.
Revealed are sort of database columns for accounts an storage data,
any of which have an internal state represented by a Keccack hash.
So a `trie` or `MPT` becomes a `column` and a `rootHash` becomes a
column state.
* Aristo: rename backend filed `filters` => `journal`
* Update full sync logging
details:
+ Disable eth handler noise while syncing
+ Log journal depth (if available)
* Fix copyright year
* Fix cruft and unwanted imports
* Remove cruft
* Docu/code cosmetics
* Aristo: Update `forkBase()`
why:
Was not up to the job
* Update/correct tracer for running against `Aristo`
details:
This patch makes sure that before creating a new `BaseVMState` the
`CoreDb` context is adjusted to accommodate for the state root that
is passed to the `BaseVMState` constructor.
* CpreDb+legacy: Always return current context with `ctxFromTx()`
why:
There was an experimental setting trying to find the node with the
proper setting in the KVT (not the hexary tie layer) which currently
does not work reliable, probably due to `Ledger` caching effects.
* Aristo: Provide descriptor fork based on search in transaction stack
details:
Try to find the tx that has a particular pair `(vertex-id,hash-key)`,
and by extension try filter and backend if the former fails.
* Cleanup & docu
* CoreDb+Aristo: Implement context re-position to earlier in-memory state
why:
It is a easy way to explore how there can be concurrent access to the
same backend storage DB with different view states. This one can access
an earlier state from the transaction stack.
* CoreDb+Aristo: Populate tracer stubs with real functionality
* Update `tracer.nim` to new API
why:
Legacy API does not sufficiently support `Aristo`
* Fix logging problems in tracer
details:
Debug logging turned off by default
* Fix function prototypes
* Add Copyright header
* Add tables import
why:
For older compiler versions on CI
* CoreDb+Aristo: Fix handler code
* Aristo+Kvt: Remove cruft
* Aristo+Kvt: The function `forkTop()` always provides a single transaction
why:
Previously it provided a single squashed tx only if there were any. Now
it will provide a blind one if there were none.
* Fix Copyright header
* CoreDb+Ledger: Update logging
why:
Use symbol `api` rather than `ctx` because the latter will be used
as name for particular objects
* CoreDb: Remove cruft
* CoreDb: Remove `TxID` support
why:
It is nowhere used and ugly implemented. The upcoming context layer
will be a cleaner alternative to use, instead should this particular
functionality be needed.
* CoreDb: Rearrange base methods in source code for better reading
* CoreDb+Aristo: Update API closures for better reading & maintenance
* CoreDb: Implement context layer for MPT
why:
On `Aristo` the context layer allows to manage different views on
the same backend database. This is an abstraction of the legacy
hexary trie which can be localised on a particular root nose.
details:
The `ctx` context provides the state (equiv. to state root) of the
database for MPT and account descriptors.
* Fix Copyright headers
* Aristo+Kvt: Fix backend `dup()` function in api setup
why:
Backend object is subject to an inheritance cascade which was not
taken care of, before. Only the base object was duplicated.
* Kvt: Simplify DB clone/peers management
* Aristo: Simplify DB clone/peers management
* Aristo: Adjust unit test for working with memory DB only
why:
This currently causes some memory corruption persumably in the
`libc` background layer.
* CoredDb+Kvt: Simplify API for KVT
why:
Simplified storage models (was over engineered) for better performance
and code maintenance.
* CoredDb+Aristo: Simplify API for `Aristo`
why:
Only single database state needed here. Accessing a similar state will
be implemented from outside this module using a context layer. This
gives better performance and improves code maintenance.
* Fix Copyright headers
* CoreDb: Turn off API tracking
why:
CI would ot go through. Was accidentally turned on.
* Aristo: Remove cruft
* Prettifying profile statistics printing & source code cosmetics
* Aristo/Kvt: API tools update
* CoreDb: Corrections, mostly API related
* CoreDb: Changed the tracer `logDb()` result
why:
Only the key-value table is used from the logger database
* CoreDb: Update legacy tracer
why:
The `contains()` directive did not correspond to `0 < get().len`
also:
Copy `CoreDb` meta settings like `trackLegaApi`, `trackNewApi`, etc. to
overlay tracer descriptor
* CoreDb: Extend/update tracer API
why:
Get ready for accommodating `Aristo` tracer
* Fix missing import
why:
Some CI compilers might have (cached?) a different NIM patch level
* Ditto
* Aristo/Kvt: Provide function hooks APIs
why:
These APIs can be used for installing tracers, profiling functoinality,
and other niceties on the databases.
* Aristo: Provide optional API profiling
details:
It basically is a re-implementation of the `CoreDb` profiling
implementation
* Kvt: Provide optional API profiling similar to `Aristo`
* CoreDb: Re-implementing profiling using `aristo_profile`
* Ledger: Re-implementing profiling using `aristo_profile`
* CoreDb: Update unit tests for maintainability
* update copyright dates
* CoreDb: Test module with additional sample selector cmd line options
* Aristo: Do not automatically remove a storage trie with the account
why:
This is an unnecessary side effect. Rather than using an automatism, a
a storage root must be deleted manually.
* Aristo: Can handle stale storage root vertex IDs as empty IDs.
why:
This is currently needed for the ledger API supporting both, a legacy
and the `Aristo` database backend.
This feature can be disabled at compile time by re-setting the
`LOOSE_STORAGE_TRIE_COUPLING` flag in the `aristo_constants` module.
* CoreDb+Aristo: Flush/delete storage trie when deleting account
why:
On either backend, a deleted account leave a dangling storage trie on
the database.
For consistency nn the legacy backend, storage tries must not be
deleted as they might be shared by several accounts whereas on `Aristo`
they are always unique.
* CoreDb: Improve API and API tracking
why:
Now logs state roots where appropriate
* CoreDb: re-implement `CoreDbVidRef` => `CoreDbTrieRef`
why:
Instead of a root vertex ID wrapper, the purpose of this object type
has been upgrades to a sub-trie prototype.
caveat:
`Aristo` backend not fully functional, yet.
* CoreDb: Update `Aristo` backend
why:
Supports virtual sub-tries
* CoreDb: Account address tracking for `StorageTrie` virtual tries
details:
Supported with API tracking/logging
* CoreDb: Keep account address in payload object
why:
No need to provide extra address argument for `merge()`, also
provides tracking possibility for account debugging.
* Ledger: Update new API for `Aristo` specific storage trie handling
* CoreDb+Ledger: Update unit tests
* Fix copyright headers
* Aristo: Re-phrase `LayerDelta` and `LayerFinal` as object references
why:
Avoids copying in some cases
* Fix copyright header
* Aristo: Verify `leafTie.root` function argument for `merge()` proc
why:
Zero root will lead to inconsistent DB entry
* Aristo: Update failure condition for hash labels compiler `hashify()`
why:
Node need not be rejected as long as links are on the schedule. In
that case, `redo[]` is to become `wff.base[]` at a later stage.
This amends an earlier fix, part of #1952 by also testing against
the target nodes of the `wff.base[]` sets.
* Aristo: Add storage root glue record to `hashify()` schedule
why:
An account leaf node might refer to a non-resolvable storage root ID.
Storage root node chains will end up at the storage root. So the link
`storage-root->account-leaf` needs an extra item in the schedule.
* Aristo: fix error code returned by `fetchPayload()`
details:
Final error code is implied by the error code form the `hikeUp()`
function.
* CoreDb: Discard `createOk` argument in API `getRoot()` function
why:
Not needed for the legacy DB. For the `Arsto` DB, a lazy approach is
implemented where a stprage root node is created on-the-fly.
* CoreDb: Prevent `$$` logging in some cases
why:
Logging the function `$$` is not useful when it is used for internal
use, i.e. retrieving an an error text for logging.
* CoreDb: Add `tryHashFn()` to API for pretty printing
why:
Pretty printing must not change the hashification status for the
`Aristo` DB. So there is an independent API wrapper for getting the
node hash which never updated the hashes.
* CoreDb: Discard `update` argument in API `hash()` function
why:
When calling the API function `hash()`, the latest state is always
wanted. For a version that uses the current state as-is without checking,
the function `tryHash()` was added to the backend.
* CoreDb: Update opaque vertex ID objects for the `Aristo` backend
why:
For `Aristo`, vID objects encapsulate a numeric `VertexID`
referencing a vertex (rather than a node hash as used on the
legacy backend.) For storage sub-tries, there might be no initial
vertex known when the descriptor is created. So opaque vertex ID
objects are supported without a valid `VertexID` which will be
initalised on-the-fly when the first item is merged.
* CoreDb: Add pretty printer for opaque vertex ID objects
* Cosmetics, printing profiling data
* CoreDb: Fix segfault in `Aristo` backend when creating MPT descriptor
why:
Missing initialisation error
* CoreDb: Allow MPT to inherit shared context on `Aristo` backend
why:
Creates descriptors with different storage roots for the same
shared `Aristo` DB descriptor.
* Cosmetics, update diagnostic message items for `Aristo` backend
* Fix Copyright year
* Activate `LedgerRef` wrapper for `AccountsCache`
details:
`accounts_cache.nim` methods are indirectly processed by the wrapper
methods from `ledger.nim`.
This works for all sources except `test_state_db.nim` where the source
`accounts_cache.nim` is included (rather than imported) in order to
access objects privy to the very source.
* Provide facility to switch to a preselected `LedgerRef` type
details:
Can be set as suggestion when initialising `CommonRef`
* Update `CoreDb` test suite for better time tracking
details:
+ Allow time logging by pre-defined block intervals
+ Print `CoreDb`/`Ledger`profiling results (if enabled)
* Explicitly use shared `Kvt` table on `Ledger` and `Clique` lookup.
why:
Speeds up lookup time with `Aristo` backend. For writing `Clique` data,
the `Companion` model allows to write `Clique` data past the database
locked by evm transactions.
* Implement `CoreDb` profiling with API tracking
why:
Chasing time spent per APT procs ...
* Implement `Ledger` profiling with API tracking
why:
Chasing time spent per APT procs ...
* Always hashify when commiting or storing
why:
A dirty cache makes no sense when committing
* Make sure that a zero key is created when adding/updating vertices
why:
This is an error fix mainly for edge cases. A typical error was
that the root key got deleted when there were only a few vertices
left on the DB.
* Need all created and changed vertices zero-keyed on the cache
why:
A zero key (i.e. empty Merkle hash) indicates that a vertex key
needs to be updated. This would not be needed immediately after
a merge as there is an actual leaf path on the cache layer. But
after subsequent merge and delete operations this information
might get blurred.
* Re-org hashing algorithm
why:
Apart from errors, the previous implementation was too slow for
two reasons:
+ some control hashes were calculated for debugging (now all
verification is done in `aristo_check` module)
+ the leaf paths stored on the cache are used to build the
labelling (aka hashing) schedule; there paths were accumulated
over successive hash sessions although it is clear that all
keys were generated, already
* Fix copyright year
* Show elapsed times with enabled `CoreDb` API tracking
* Show elapsed times with enabled `LedgerRef` API tracking
* Reorg `CoreDb` auto destructors for `Aristo` DB
why:
While `Aristo` supports some parallelism for concurrent database access,
this comes with a price of management overhead. With a naive approach,
the auto-destructor will slow down execution because the ledger and
evm treat the database in a shared mode where a DB descriptor is just
created and thrown away shortly after.
This is reflected in the `Coredb` abstraction layer above `Aristo`/`Kvt`
where a few `Shared` type descriptors are cached and a shared reference
is returned rather than a disposable new object.
* For `CoreDb` support transaction level tracking
details:
This is mainly an extra for the legacy DB as `Aristo` and `Kvt` support
this already.
Also return an error on the legacy DB backend when `persistent()` is
called while there are transactions pending (the `persistent()` call
does nothing otherwise on the legacy backend.)
* Clear compiler warnings (remove unused variables etc.)
Jacek Sieka
tersec
Jordan Hrycaj
andri lim