* prefer the spec-derived name where possible
* don't pass stateRoot to LedgerRef and friends (it doesn't do anything)
* add deprecation warning in graphql - it needs updating to use
forkedchain instead
* blocks can be bigger than the default 1mb when json-rpc-encoded - this
happens on sepolia for example
* json-rpc bump improves debug logging and fixes a number of bugs
* json-serialization bump fixes a crash on invalid arrays in json data
At some point, it would probably be better to compute the maximum block
size from actual block constraints, though this is somewhat tricky and
depends on gas limits etc. Until then, 16mb should be plenty.
With this, sepolia can be synced :)
* partial commit
* fixes
* remove converters too
* revert changes on nimbus_verified_proxy
* revert changes in converter
* revert changes(re-xport) in rpc_types
* update copyright year
* replace types in other binaries
* chain config bug
* fix rebase conflict imcomplete buffer
* fix more rebase buffers
* remove ditto types and converters
* fix the tests
* update copyright year
* fix: rpc can't serve blocks in db
* shift db access to forkedchainref
* cleanup
* kurtosis test fix, should fail + eth_getTransactionReceipt
* remove kurtosis not + cleanup
* alter CI check to pass
* optimize impl
* cleanup
* fix loop case
This is a minimal set of changes to make things work with the new types
in nim-eth - this is the minimal PR that merely resolves
incompatibilities while the full change set would include more cleanup
and migration.
* ForkedChainRef.forkchoice: Skip newBase calculation and skip chain finalization if finalizedHash is zero
* Fix ForkedChainRef.forkChoice: do nothing if headHash is the same with cursorHash
* Fix stupid bug in engine API FCU when calling ForkedChainRef.forkChoice
* Wire RPC server API to nimbus RPC manager
* Add test case
* Use default(Hash256) in ForkedChainRef
* Wiring ForkedChainRef to other components
- Disable majority of hive simulators
- Only enable pyspec_sim for the moment
- The pyspec_sim is using a smaller RPC service wired to ForkedChainRef
- The RPC service will gradually grow
* Addressing PR review
* Fix test_beacon/setup_env
* Enable consensus_sim (#2441)
* Enable consensus_sim
* Remove isFile check
* Enable Engine API jwt auth tests and exchange cap tests
* Enable engine api in build_sim.sh
* Wire ForkedChainRef to Engine API newPayload
* Wire Engine API getBodies to ForkedChainRef
* Wire Engine API api_forkchoice to ForkedChainRef
* Wire more RPC methods to ForkedChainRef
* Implement eth_syncing
* Implement eth_call and eth_getlogs
* TxPool: simplify smartHead
* Fix smartHead usage
* Fix txpool headDiff
* Remove hasBlockHeader and use headerExists
* Addressing review
* remove some redundant EH
* avoid pessimising move (introduces a copy in this case!)
* shift less data around when reading era files (reduces stack usage)
* Rename `newKvt()` -> `ctx.getKvt()`
why:
Clean up legacy shortcut. Also, the `KVT` returned is not instantiated
but refers to the shared `KVT` that resides in a context which is a
generalisation of an in-memory database fork. The function `ctx`
retrieves the default context.
* Rename `newTransaction()` -> `ctx.newTransaction()`
why:
Clean up legacy shortcut. The transaction is applied to a context as a
generalisation of an in-memory database fork. The function `ctx`
retrieves the default context.
* Rename `getColumn(CtGeneric)` -> `getGeneric()`
why:
No more a list of well known sub-tries needed, a single one is enough.
In fact, `getColumn()` did only support a single sub-tree by now.
* Reduce TODO list
* Use simpler schema when writing transactions, receipts, and withdrawals
Using MPT not only slow but also take up more spaces than needed.
Aristo will remove older tries and only keep the last block tries.
Using simpler schema will avoid those problems.
* Rename getTransaction to getTransactionByIndex
* Simplify txpool baseFeeGet
- Avoid using toEVMFork because we are not in EVM
- Rename `isLondon` to `isLondonOrLater`
* Remove timestamp from isLondonOrLater
It is common for many accounts to share the same code - at the database
level, code is stored by hash meaning only one copy exists per unique
program but when loaded in memory, a copy is made for each account.
Further, every time we execute the code, it must be scanned for invalid
jump destinations which slows down EVM exeuction.
Finally, the extcodesize call causes code to be loaded even if only the
size is needed.
This PR improves on all these points by introducing a shared
CodeBytesRef type whose code section is immutable and that can be shared
between accounts. Further, a dedicated `len` API call is added so that
the EXTCODESIZE opcode can operate without polluting the GC and code
cache, for cases where only the size is requested - rocksdb will in this
case cache the code itself in the row cache meaning that lookup of the
code itself remains fast when length is asked for first.
With 16k code entries, there's a 90% hit rate which goes up to 99%
during the 2.3M attack - the cache significantly lowers memory
consumption and execution time not only during this event but across the
board.
* Remove AccountStateDB
AccountStateDB should no longer be used.
It's usage have been reduce to read only operations.
Replace it with LedgerRef to reduce maintenance burden.
* remove extra spaces
Co-authored-by: tersec <tersec@users.noreply.github.com>
---------
Co-authored-by: tersec <tersec@users.noreply.github.com>
* Bump nim-eth, nim-web3, nimbus-eth2
- Replace std.Option with results.Opt
- Fields name changes
* More fixes
* Fix Portal stream async raises and portal testnet Opt usage
* Bump eth + nimbus-eth2 + more fixes related to eth_types changes
* Fix in utp test app and nimbus-eth2 bump
* Fix test_blockchain_json rebase conflict
* Fix EVMC block_timestamp conversion plus commentary
---------
Co-authored-by: kdeme <kim.demey@gmail.com>
This PR consolidates the split header-body sequences into a single EthBlock
sequence and cleans up the fallout from that which significantly reduces
block processing overhead during import thanks to less garbage collection
and fewer copies of things all around.
Notably, since the number of headers must always match the number of bodies,
we also get rid of a pointless degree of freedom that in the future could
introduce unnecessary bugs.
* only read header and body from era file
* avoid several unnecessary copies along the block processing way
* simplify signatures, cleaning up unused arguemnts and returns
* use `stew/assign2` in a few strategic places where the generated
nim assignent is slow and add a few `move` to work around poor
analysis in nim 1.6 (will need to be revisited for 2.0)
```
stats-20240607_2223-a814aa0b.csv vs stats-20240608_0714-21c1d0a9.csv
bps_x bps_y tps_x tps_y bpsd tpsd timed
block_number
(498305, 713245] 1,540.52 1,809.73 2,361.58 2775.340189 17.63% 17.63% -14.92%
(713245, 928185] 730.36 865.26 1,715.90 2028.973852 18.01% 18.01% -15.21%
(928185, 1143126] 663.03 789.10 2,529.26 3032.490771 19.79% 19.79% -16.28%
(1143126, 1358066] 393.46 508.05 2,152.50 2777.578119 29.13% 29.13% -22.50%
(1358066, 1573007] 370.88 440.72 2,351.31 2791.896052 18.81% 18.81% -15.80%
(1573007, 1787947] 283.65 335.11 2,068.93 2441.373402 17.60% 17.60% -14.91%
(1787947, 2002888] 287.29 342.11 2,078.39 2474.179448 18.99% 18.99% -15.91%
(2002888, 2217828] 293.38 343.16 2,208.83 2584.77457 17.16% 17.16% -14.61%
(2217828, 2432769] 140.09 167.86 1,081.87 1296.336926 18.82% 18.82% -15.80%
blocks: 1934464, baseline: 3h13m1s, contender: 2h43m47s
bpsd (mean): 19.55%
tpsd (mean): 19.55%
Time (total): -29m13s, -15.14%
```
* Cleanup unneeded stateless and block witness code. Keeping MultiKeys which is used in the eth_getProofsByBlockNumber RPC endpoint which is needed for the Fluffy state network bridge.
* Rename generateWitness flag to collectWitnessData to better describe what the flag does. We only collect the keys of the touched accounts and storage slots but no block witness generation is supported for now.
* Move remaining stateless code into nimbus directory.
* Add vmstate parameter to ChainRef to fix test.
* Exclude *.in from check copyright year
---------
Co-authored-by: jangko <jangko128@gmail.com>
* Remove exception from evm memory
* Remove exception from gas meter
* Remove exception from stack
* Remove exception from precompiles
* Remove exception from gas_costs
* Remove exception from op handlers
* Remove exception from op dispatcher
* Remove exception from call_evm
* Remove exception from EVM
* Fix tools and tests
* Remove exception from EVMC
* fix evmc
* Fix evmc
* Remove remnants of async evm stuff
* Remove superflous error handling
* Proc to func
* Fix errors detected by CI
* Fix EVM op call stack usage
* REmove exception handling from getVmState
* Better error message instead of just doAssert
* Remove unused validation
* Remove superflous catchRaise
* Use results.expect instead of unsafeValue
* CoreDb: Remove crufty second/off-site KVT
why:
Was used to allow late `Clique` to store directly to disk
* CoreDb: Remove prune flag related functionality
why:
Is completely legacy stuff
* CoreDb: Remove dependence on legacy API (tests unsupported yet)
why:
Does not fully support Aristo
* Re-factoring `state_db` using new API
details:
Only minimum changes needed to compile `nimbus`
* Update tests and aux modules
* Turn off legacy API and remove `distinct_tries`
comment:
The legacy API has now cruft status, will be removed soon
* Fix copyright years
* Update rpc for verified proxy
---------
Co-authored-by: Jacek Sieka <jacek@status.im>
* Implement engine_getClientVersionV1
* full git revision string
* Limit GitRevisionString to 8 chars
* Fixes
* Debug windows CI
* debug windows ci
* produce git revision using -C
* try not to delete .git folder in windows ci
* Harden GitRevision procuration
* Add double quotes to git -C param
* Escape sourcePath
* Remove double quotes from git -C param
* Workaround for 0 gas price estimation
The transaction spammer from Kurtosis estimates the gas price of its
transactions using 'eth_gasPrice'. Our implementation returns 0 when
no transactions have been executed yet, not taking into account the
EIP-1559 block base fee. Force a hardcoded minimum for now to unstuck.
* Adjust tests to cover new minimum gas fee
* Skip gas price test
* Introduce wrapper type for EIP-4844 transactions
EIP-4844 blob sidecars are a concept that only exists in the mempool.
After inclusion of a transaction into an execution block, only the
versioned hash within the transaction remains. To improve type safety,
replace the `Transaction.networkPayload` member with a wrapper type
`PooledTransaction` that is used in contexts where blob sidecars exist.
* Bump nimbus-eth2 to 87605d08a7f9cfc3b223bd32143e93a6cdf351ac
* IPv6 'listen-address' in `nimbus_verified_proxy`
* Bump nim-libp2p to 21cbe3a91a70811522554e89e6a791172cebfef2
* Fix beacon_lc_bridge payload conversion and conf.listenAddress type
* Change nimbus_verified_proxy.asExecutionData param to SomeExecutionPayload
* Rerun nph to fix asExecutionData style format
* nimbus_verified_proxy listenAddress
* Use PooledTransaction in nimbus-eth1 tests
---------
Co-authored-by: jangko <jangko128@gmail.com>
The transaction spammer from Kurtosis requests the nonce value of its
account based on 'pending' tag. As we lack that implementation, go with
the next best answer from the 'latest' tag. This does not include info
about transactions from the mempool that have not yet been executed.
Jacek Sieka
andri lim
Chirag Parmar
Advaita Saha
tersec
web3-developer
Jordan Hrycaj
Barnabas Busa
Etan Kissling