* Update sync scheduler pool mode
why:
The pool mode allows to loop over active peers one after another. This
is ideal for soft re-starting peers. As this is a two tier experience
(start/stop, setup/release) the loop must be run twice. This is
controlled by a more rigid re-definition of how to use the `poolMode`
flag.
* Mitigate RLP serialiser deficiency
why:
Currently, serialising the `BlockBody` in not conevrtible and need
to be checked in the `eth` module. Currently a local fix for the
wire protocol applies. Unit tests will stay (after this local solution
will have been removed.)
* Code cosmetics and massage
details:
Main part is `types.toStr()` as a unified function for logging block
numbers.
* Allow to use a logical genesis replacement (start of history)
why:
Snap sync will set up an arbitrary pivot at a block number different
from zero. In fact, the higher the block number the better.
details:
A non-genesis start of history will currently only affect the score
values which were derived from the difficulty.
* Provide function to store the snap pivot block header in chain db
why:
Together with the start of history facility, this allows to proceed
with full syncing once snap has finished.
details:
Snap db storage was switched from a sub-tables to the flat chain db.
* Provide database completeness and sanity checker
details:
For debugging on smaller databases, only
* Implement snap -> full sync switch
* Somewhat tighten error handling
why:
Zombie state is invoked when the current peer turns out to be useless
for further communication. While there is a chance to further talk
to a peer about another topic (aka healing) after some protocol failure,
it makes no sense to do so after a network problem.
The latter state is explained bu the `peerDegraded` flag that goes
together with the `zombie` state flag. A degraded peer is dropped
immediately.
* Remove `--sync-mode=snapCtx` option, always start snap in recovery mode
why:
No need for a snap sync option without recovery mode, can be achieved
by deleting the database.
* Code cosmetics, typos, prettify logging, debugging helper, etc.
* Split off snap sync sub-mode handler into separate modules
details:
The original `worker.nim` source has become a multiplexer for several
snap sync sub-modes `full` and `snap`. The source modules of the
incarnations of a particular sync sub-mode are places into the
`worker/play` directory.
* Update ticker for snap and full sync logging
* Update nearby/neighbour leaf nodes finder
details:
Update return error codes so that in the case that there is no more
leaf node beyond the search direction, the particular error code
`NearbyBeyondRange` is returned.
* Compile largest interval range containing only this leaf point
why:
Will be needed in snap sync for adding single leaf nodes to the range
of already allocated nodes.
* Reorg `hexary_inspect.nim`
why:
Merged the nodes collecting algorithm for persistent and in-memory
into a single generic function `hexary_inspect.inspectTrieImpl()`
* Update fetching accounts range failure handling in `rangeFetchAccounts()`
why:
Rejected response leads now to fetching for another account range. Only
repeated failures (or all done) terminate the algorithm.
* Update accounts healing
why:
+ Fixed looping over a bogus node response that could not inserted into
the database. As a solution, these nodes are locally registered and not
asked for in this download cycle.
+ Sub-optimal handling of interval range for a healed account leaf node.
Now the maximal range interval containing this node is registered as
processed which leafs to de-fragementation of the processed (and
unprocessed) range list(s). So *gap* ranges which are known not to
cover any account leaf node are not asked for on the network, anymore.
+ Sporadically remove empty interval ranges (if any)
* Update logging, better variable names
* Redesign snap1 message GetTrieNodes argument prototypes
why:
A list of sub-objects `seq[SnapTriePath]` is more intuitive to work with
than an opaque definition `seq[seq[Blob]]` because the inner object
`SnapTriePath` object has a dedicated inner structure (for how to
interprete `seq[Blob]`.)
* Collect some public constants into `constants.nim` file
* Reorg `hexary_paths.nim`
why:
+ Collecting nodes following a partial path properly ending at an
extension node failed to collect this last node.
+ Merged the nodes collecting algorithm for persistent and in-memory
into a single generic function `hexary_paths.rootPathExtend()`
info:
Extracted common tasks to `hexary_nodes_helper.nim`
* Implement `StorageRanges` message handler for snap/1 protocol
now macro assembler support merge fork, shanghai, etc without using ugly hack.
also each assembler test have their own `setup` section that can access
`vmState` and perform various custom setup.
simplify EVM and delegete those things to accounts cache.
also no more manual state clearing, accounts cache will be
responsible for both collecting touched account and perform
state clearing.
* Gwei conversion should use u256 because u64 can overflow.
* Make withdrawals follow the EIP-158 state-clearing rules.
(i.e. Empty accounts should be deleted.)
* Allow the zero address in normalizeNumber.
(Necessary for one of the new withdrawals-related tests.)
* Another fix with a withdrawals-related test.
* Add state root to node steps path register `RPath` or `XPath`
why:
Typically, the first node in the path register is the state root. There
are occasions, when the path register is empty (i.e. there are no node
references) which typically applies to a zero node key.
In order to find the next node key greater than zero, the state root is
is needed which is now part of the `RPath` or `XPath` data types.
* Extracted hexary tree debugging functions into separate files
* Update empty path fringe case for left/right node neighbour
why:
When starting at zero, the node steps path register would be empty. So
will any path that is before the fist non-zero link of a state root (if
it is a `Branch` node.)
The `hexaryNearbyRight()` or `hexaryNearbyLeft()` function required a
non-zero node steps path register. Now the first node is to be advanced
starting at the first state root link if necessary.
* Simplify/reorg neighbour node finder
why:
There was too mach code repetition for the cases
* persistent or in-memory database
* left or right move
details:
Most algorithms apply for persistent and in-memory alike. Using
templates/generic functions most of these algorithms can be stated
in a unified way
* Update storage slots snap/1 handler
details:
Minor changes to be more debugging friendly.
* Fix detection of full database for snap sync
* Docu: Snap sync test & debugging scenario
* Gwei conversion should use u256 because u64 can overflow.
* Make withdrawals follow the EIP-158 state-clearing rules.
(i.e. Empty accounts should be deleted.)
* Allow the zero address in normalizeNumber.
(Necessary for one of the new withdrawals-related tests.)
* Handle last/all node(s) proof conditions at leaf node extractor
detail:
Flag whether the maximum extracted node is the last one in database
No proof needed if the full tree was extracted
* Clean up some helpers & definitions
details:
Move entities to more plausible locations, e.g. `Account` object need
not be dealt with in the range extractor as it applies to any kind of
leaf data.
* Fix next/prev database walk fringe condition
details:
First check needed might be for a leaf node which was done too late.
* Homogenise snap/1 protocol function prototypes
why:
The range arguments `origin` and `limit` data types differed in various
function prototypes (`Hash256` vs. `openArray[byte]`.)
* Implement `GetStorageRange` handler
* Implement server timeout for leaf node retrieval
why:
This feature leaves control on the server for probably costly action
invoked by the network
* Implement maximal reply size for snap service
why:
This feature leaves control on the server for probably costly action
invoked by the network.
* Part of EIP-4895: add withdrawals processing to block processing.
* Refactoring: extracted the engine API handler bodies into procs.
Intending to implement the V2 versions next. (I need the bodies to be
in separate procs so that multiple versions can use them.)
* Working on Engine API changes for Shanghai.
* Updated nim-web3, resolved ambiguity in Hash256 type.
* Updated nim-eth3 to point to master, now that I've merged that.
* I'm confused about what's going on with engine_client.
But let's try resolving this Hash256 ambiguity.
* Still trying to fix this conflict with the Hash256 types.
* Does this work now that nimbus-eth2 has been updated?
* Corrected blockValue in getPayload responses back to UInt256.
c834f67a37
* Working on getting the withdrawals-related tests to pass.
* Fixing more of those Hash256 ambiguities.
(I'm not sure why the nim-web3 library introduced a conflicting type
named Hash256, but right now I just want to get this code to compile again.)
* Bumped a couple of libraries to fix some error messages.
* Needed to get "make fluffy-tools" to pass, too.
* Getting "make nimbus_verified_proxy" to build.
* Clean up some function prototypes
why:
Simplify polymorphic prototype variances for easier maintenance.
* Fix fringe condition crash when importing bogus RLP node
why:
Accessing non-list RLP entry as a list causes `Defect`
* Fix left boundary proof at range extractor
why:
Was insufficient. The main problem was that there was no unit test for
the validity of the generated left boundary.
* Handle incomplete left boundary proofs early
why:
Attempt to do it later leads to overly complex code in order to prevent
looping when the same peer repeats to send the same incomplete proof.
Contrary, gaps in the leaf sequence can be handled gracefully with
registering the gaps
* Implement a manual pivot setup mechanism for snap sync
why:
For a test scenario it is convenient to set the pivot to something
lower than the beacon header from the consensus layer. This does not
need rely on any RPC mechanism.
details:
The file containing the pivot specs is specified by the
`--sync-ctrl-file` option. It is regularly parsed for updates.
* Fix calculation error
why:
Prevent from calculating negative square root
* Renaming androgynous sub-object names according to where they belong
why:
These objects are not explicitly dealt with. They give meaning to
some generic wrapper objects. Naming them after their origin may
help troubleshooting.
* Redefine proof nodes list data type for `snap/1` wire protocol
why:
The current specification suffered from the fact that the basic data
type for a proof node is an RLP encoded hexary node. This slightly
confused the encoding/decoding magic.
details:
This is the second attempt, now wrapping the `seq[Blob]` into a
wrapper object of `seq[SnapProof]` for a distinct alias sequence.
In the previous attempt, `SnapProof` was a wrapper object holding the
`Blob` with magic applied to the `seq[]`. This needed the `append`
mixin to strip the outer wrapper that was applied to the `Blob` already
when it was passed as argument.
* Fix some prototype inconsistency
why:
For easy reading, `getAccountRange()` handler return code should
resemble the `accoundRange()` anruments prototype.
* Fix locked database file annoyance with unit tests on Windows
why:
Need to clean up old files first from previous session as files remain
locked despite closing of database.
* Fix initialisation order
detail:
Apparently this has no real effect as the ticker is only initialised
here but started later.
This possible bug has been in all for a while and was running with the
previous compiler and libraries.
* Better naming of data fields for sync descriptors
details:
* BuddyRef[S,W]: buddy.data -> buddy.only
* CtxRef[S]: ctx.data -> ctx.pool
* Refactoring in preparation for time-based forking.
* Timestamp-based hard-fork-transition.
* Workaround SideEffect issue / compiler bug for both failing locations in Portal history code
---------
Co-authored-by: kdeme <kim.demey@gmail.com>
* Redefine `seq[Blob]` => `seq[SnapProof]` for `snap/1` protocol
why:
Proof nodes are traded as `Blob` type items rather than Nim objects. So
the RLP transcoder must not extra wrap proofs which are of type
seq[Blob]. Without custom encoding one would produce a
`list(blob(item1), blob(item2) ..)` instead of `list(item1, item2 ..)`.
* Limit leaf extractor by RLP size rather than number of items
why:
To be used serving `snap/1` requests, the result of function
`hexaryRangeLeafsProof()` is limited by the maximal space
needed to serialise the result which will be part of the
`snap/1` repsonse.
* Let the range extractor `hexaryRangeLeafsProof()` return RLP list sizes
why:
When collecting accounts, the size oft the accounts list when encoded
as RLP is continually updated. So the summed up value is available
anyway. For the proof nodes list, there are not many (~ 10) so summing
up is not expensive here.
* Removed some Windows specific unit test annoyances
details:
+ Short put()/get() cycles on persistent database have a race condition
with vendor rocksdb. On a specific (and slow) qemu/win7 a 50ms `sleep()`
in between will mostly do the job (i.e. unless heavy CPU load.) This
issue was not observed on github/ci.
+ Removed annoyances when qemu/Win7 keeps the rocksdb database files
locked even after closing the db. The problem is solved by strictly
using fresh names for each test. No assumption made to be able to
properly clean up. This issue was not observed on github/ci.
* Silence some compiler gossip -- part 7, misc/non(sync or graphql)
details:
Adding some missing exception annotation
* Unit tests to verify calculations based on hard coded constants
why:
Sizes of RLP encoded objects are available at run time only.
* Changed argument order for `hexaryRangeLeafsProof()` prototype
why:
Better to read as a stand-alone function (arguments were optimised
for functional pipelines)
* Run sub-range proof tests for extracted ranges
* Cosmetics
details:
+ Update doc generator
+ Fix key type representation in `hexary_desc` for debugging
+ Redefine `isImportOk()` as template for better `check()` line reporting
* Fix fringe condition when interpolating Merkle-Patricia tries
details:
Small change with profound effect fixing some pathological condition
that haunted the unit test set on large data sers. There is still one
condition left which might well be due to an incomplete data set.
* Unit test proof nodes for node range extractor
* Unit tests to run on full extraction set
why:
Left over from troubleshooting, range length was only 5
* Reduce Nim 1.6 compiler warnings/hints for Fluffy and Nimbus proxy
Mostly raises Defect removals, TaintedString removal and some
unnecessary imports.
Also updating the copyright years alongside.
* Further reduce Nim 1.6 compiler warnings/hints for Nimbus
* Silence some compiler gossip -- part 5, common
details:
Mostly removing redundant imports and `Defect` tracer after switch
to nim 1.6
* Silence some compiler gossip -- part 6, db, rpc, utils
details:
Mostly removing redundant imports and `Defect` tracer after switch
to nim 1.6
* Silence some compiler gossip -- part 7, randomly collected source files
details:
Mostly removing redundant imports and `Defect` tracer after switch
to nim 1.6
* Silence some compiler gossip -- part 8, assorted tests
details:
Mostly removing redundant imports and `Defect` tracer after switch
to nim 1.6
* Clique update
why:
More impossible exceptions (undoes temporary fix from previous PR)
* Update comments and test noise
* Fix boundary proofs
why:
Where neither used in production, nor unit tested. For production, other
methods apply to test leaf range integrity directly based of the proof
nodes.
* Added `hexary_range()`: interval range + proof extractor
details:
+ Will be used for `snap/1` protocol handler
+ Unit tests added (also for testing left boundary proof)
todo:
Need to verify completeness of proof nodes
* Reduce some nim 1.6 compiler noise
* Stop unit test gossip for ci tests
* Updated to the latest nim-eth, nim-rocksdb, nim-web3
* Bump nimbus-eth2 module and fix related issues
Temporarily disabling Portal beacon light client network as it is
a lot of copy pasted code that did not yet take into account
forks. This will require a bigger rework and was not yet tested
in an actual network anyhow.
* More nimbus fixes after module bumps
---------
Co-authored-by: Adam Spitz <adamspitz@status.im>
Co-authored-by: jangko <jangko128@gmail.com>
Two unresolved items currently:
- Three tests that are temporarily disabled as they fail in the
macro_assembler code, which seems to be due to an ambigious
identifier Stop (Ops and chronos ServerCommand enum).
- i386 CI disabled as it fails at Nim compilation already. Failed
tests where already ignored for this target.
why:
Clique relies on the even/odd position of an address after sorting. For
address generation, the Nim PRNG was used which seems to have changed
with Nim 1.6.11 (Linux, Windoes only.)
As a replace, the Posix.1-2001 example (two-liner calculation) generator
is used.
* Extracted RocksDB timing unit tests into separate file
why:
make space for more in main module :)
* Extracted `inspectionRunner()` unit tests into separate file
why:
make space for more in main module :)
* Extracted `storagesRunner()` unit tests into separate file
why:
make space for more in main module :)
* Extracted pivot checkpoint store/retrieval unit tests into separate file
why:
make space for more in main module :)
* Extract helper functions into separate source file
* Extracted account import unit tests into separate file
why:
make space for more in main module :)
* Rename `test_decompose()` => `test_NodeRangeDecompose()`
why:
There will be more functions with `test_NodeRange` prefix.
The `BlockHeader` structure in `nim-eth` was updated with support for
EIP-4844 (danksharding). To enable the `nim-eth` bump, the ingress of
`BlockHeader` structures has been hardened to reject headers that have
the new `excessDataGas` field until proper EIP4844 support exists.
https://github.com/status-im/nim-eth/pull/570
* Rename and update dismantle => hexaryEnvelopeDecompose()
why:
+ As for naming, a positive connotation is prefered
+ The unit tests were really insufficient
+ The function result was wrong on a few boundry conditions
detail:
+ Extracted the function from `hexary_paths.nim` and re-implemented
it together with other envelope functions => `hexary_envelope.nim`
+ Re-wrote docu for `hexaryEnvelopeDecompose()`
* Relaxed right condition for `hexaryEnvelopeDecompose()` range argument
why;
Previously, the right point of the argument interval had to be a path
to an allocated leaf node. While this is typically a given for accounts,
it is easier to require an arbitrary range of paths (or keys) with
the requirement of a `boundary proof` for left and right (i.e. enough
nodes in the database to find the end points.)
also:
Bug fixes for related functions (typos, missing conditions etc.)
* Add missing unit tests include file
Jordan Hrycaj
jangko
Adam Spitz
Kim De Mey
Etan Kissling