* Add persistent last state stamp feature
why:
This allows to run `CoreDb` without journal
* Start `CoreDb` without journal
* Remove journal related functions from `CoredDb`
why:
Typo. That worked the wrong way in the unit tests because the
tests always store the last item separately with extended
logging.
Co-authored-by: jordan <jordan@dry.pudding>
This PR extends the `nimbus import` command to also allow reading from
era files - this command allows creating or topping up an existing
database with data coming from era files instead of network sync.
* add `--era1-dir` and `--max-blocks` options to command line
* make `persistBlocks` report basic stats like transactions and gas
* improve error reporting in several API
* allow importing multiple RLP files in one go
* clean up logging options to match nimbus-eth2
* make sure database is closed properly on shutdown
* Workaround for disallowed transaction superseding
The transaction spammer from Kurtosis keeps spamming transactions with
the same nonce because report 'pending' account nocne based on 'latest'
rather than actually considering the mempool. To avoid errors from
rejecting those, disable the required gas price bump when replacing
a transaction with a new nonce.
* Lint
* Skip superseding negative test
* Attempt to roll back stateless mode implementation in a single PR
why:
+ Stateless mode is not fully working and in the way
+ Single PR should make it feasible to investigate for a possible
re-implementation
* Fix copyright year
* Fix annotation for exception (evmc mode)
* Introduce wrapper type for EIP-4844 transactions
EIP-4844 blob sidecars are a concept that only exists in the mempool.
After inclusion of a transaction into an execution block, only the
versioned hash within the transaction remains. To improve type safety,
replace the `Transaction.networkPayload` member with a wrapper type
`PooledTransaction` that is used in contexts where blob sidecars exist.
* Bump nimbus-eth2 to 87605d08a7f9cfc3b223bd32143e93a6cdf351ac
* IPv6 'listen-address' in `nimbus_verified_proxy`
* Bump nim-libp2p to 21cbe3a91a70811522554e89e6a791172cebfef2
* Fix beacon_lc_bridge payload conversion and conf.listenAddress type
* Change nimbus_verified_proxy.asExecutionData param to SomeExecutionPayload
* Rerun nph to fix asExecutionData style format
* nimbus_verified_proxy listenAddress
* Use PooledTransaction in nimbus-eth1 tests
---------
Co-authored-by: jangko <jangko128@gmail.com>
* Aristo: Allow to define/set `FilterID` for journal filter records
why:
After some changes, the `FilterID` is isomorphic to the `BlockNumber`
scalar (well, the first 2^64 entries of a `BlockNumber`.)
The needed change for `FilterID` is that the `FilterID(0)` value is
valid part of the `FilterID` scalar. A non-valid `FilterID` entry is
represented by `none(FilterID)`.
* Aristo: Split off function `persist()` as persistent version of `stow()`
why:
In production, `stow(persistent=false,..)` is currently unused. So,
using `persist()` rather than `stow(persistent=true,..)` improves
readability and is better to maintain.
* CoreDb+Aristo: Store block numbers in journal records
why:
This makes journal records searchable by block numbers
* Aristo: Rename some journal related functions
why:
The name *journal* is more appropriate to api functions than something
with *fifo* or *filter*.
* CoreDb+Aristo: Update last/oldest journal state retrieval
* CoreDb+Aristo: Register block number with state root in journal
why:
No need anymore for extra lookup table `stRootToBlockNum` which maps
a storage root -> block number.
* Aristo: Remove unused function `getFilUbe()` from api
* CoreDb: Remove now unused virtual table `stRootToBlockNum`
why:
Was used to map a state root to a block number. This functionality
is now embedded into the recovery journal backend.
* Turn of API tracking (will fail on `fluffy`)
* Aristo: Code cosmetics, e.g. update some CamelCase names
* CoreDb+Aristo: Provide oldest known state root implied
details:
The Aristo journal allows to recover earlier but not all state roots.
* Aristo: Fix journal backward index operator, e.g. `[^1]`
* Aristo: Fix journal updater
why:
The `fifosStore()` store function slightly misinterpreted the update
instructions when translation is to database `put()` functions. The
effect was that the journal was ever growing due to stale entries which
were never deleted.
* CoreDb+Aristo: Provide utils for purging stale data from the KVT
details:
See earlier patch, not all state roots are available. This patch
provides a mapping from some state root to a block number and allows to
remove all KVT data related to a particular block number
* Aristo+Kvt: Implement a clean up schedule for expired data in KVT
why:
For a single state ledger like `Aristo`, there is only a limited
backlog of states. So KVT data (i.e. headers etc.) are cleaned up
regularly
* Fix copyright year
* Code cosmetics
* Aristo+Kvt: Fix api wrappers
why:
Api setup killed the backend descriptor when backend mapping was
disabled.
* Aristo: Implement masked profiling entries
why:
Database backend should be listed but not counted in tally
* CoreDb: Simplify backend() methods
why:
DBMS backend access Was provided very early and over engineered. Now
there are only two backend machines, one for `Kvt` and the other one
for an `Mpt` available only via new API.
* CoreDb: Code cleanup regarding descriptor types
* CoreDb: Refactor/redefine `persistent()` methods
why:
There were `persistent()` methods for any type of caching storage
facilities `Kvt`, `Mpt`, `Phk`, and `Acc`. Now there is only a single
`persistent()` method storing all facilities in tandem (similar to
how transactions work.)
For non shared `Kvt` tables, there is now an extra storage method
`saveOffSite()`.
* CoreDb lingo update: `trie` becomes `column`
why:
Notion of a `trie` is pretty much hidden by the new `CoreDb` api.
Revealed are sort of database columns for accounts an storage data,
any of which have an internal state represented by a Keccack hash.
So a `trie` or `MPT` becomes a `column` and a `rootHash` becomes a
column state.
* Aristo: rename backend filed `filters` => `journal`
* Update full sync logging
details:
+ Disable eth handler noise while syncing
+ Log journal depth (if available)
* Fix copyright year
* Fix cruft and unwanted imports
* Remove cruft
* Docu/code cosmetics
* Aristo: Update `forkBase()`
why:
Was not up to the job
* Update/correct tracer for running against `Aristo`
details:
This patch makes sure that before creating a new `BaseVMState` the
`CoreDb` context is adjusted to accommodate for the state root that
is passed to the `BaseVMState` constructor.
* CpreDb+legacy: Always return current context with `ctxFromTx()`
why:
There was an experimental setting trying to find the node with the
proper setting in the KVT (not the hexary tie layer) which currently
does not work reliable, probably due to `Ledger` caching effects.
* Aristo: Provide descriptor fork based on search in transaction stack
details:
Try to find the tx that has a particular pair `(vertex-id,hash-key)`,
and by extension try filter and backend if the former fails.
* Cleanup & docu
* CoreDb+Aristo: Implement context re-position to earlier in-memory state
why:
It is a easy way to explore how there can be concurrent access to the
same backend storage DB with different view states. This one can access
an earlier state from the transaction stack.
* CoreDb+Aristo: Populate tracer stubs with real functionality
* Update `tracer.nim` to new API
why:
Legacy API does not sufficiently support `Aristo`
* Fix logging problems in tracer
details:
Debug logging turned off by default
* Fix function prototypes
* Add Copyright header
* Add tables import
why:
For older compiler versions on CI
* Aristo+Kvt: Fix backend `dup()` function in api setup
why:
Backend object is subject to an inheritance cascade which was not
taken care of, before. Only the base object was duplicated.
* Kvt: Simplify DB clone/peers management
* Aristo: Simplify DB clone/peers management
* Aristo: Adjust unit test for working with memory DB only
why:
This currently causes some memory corruption persumably in the
`libc` background layer.
* CoredDb+Kvt: Simplify API for KVT
why:
Simplified storage models (was over engineered) for better performance
and code maintenance.
* CoredDb+Aristo: Simplify API for `Aristo`
why:
Only single database state needed here. Accessing a similar state will
be implemented from outside this module using a context layer. This
gives better performance and improves code maintenance.
* Fix Copyright headers
* CoreDb: Turn off API tracking
why:
CI would ot go through. Was accidentally turned on.
* Added procs to get and store block witness in db and add generate-witness cli flag.
* Completed initial implementation of block witness storage.
* Added test to verify witness is persisted to db after call to persistBlock.
* Update getBlockWitness to return witness using Result type.
* Make generate witness parameter hidden.
* Completed draft implementation of witness JSON-RPC endpoints for portal network bridge.
* Updated Nimbus RPC configuration to support enabling experimental endpoints.
* Moved witness verification tests.
* Added json test for getProof.
* Added main procs to new tests to fix test suite.
* Added getBlockWitness test to blockchain json test suite.
* Added tests for experimental RPC endpoints and improved the API to support returning state proofs from before or after block execution.
* Correctly rollback transaction in getBlockWitness proc.
* Activate `LedgerRef` wrapper for `AccountsCache`
details:
`accounts_cache.nim` methods are indirectly processed by the wrapper
methods from `ledger.nim`.
This works for all sources except `test_state_db.nim` where the source
`accounts_cache.nim` is included (rather than imported) in order to
access objects privy to the very source.
* Provide facility to switch to a preselected `LedgerRef` type
details:
Can be set as suggestion when initialising `CommonRef`
* Update `CoreDb` test suite for better time tracking
details:
+ Allow time logging by pre-defined block intervals
+ Print `CoreDb`/`Ledger`profiling results (if enabled)
* Explicitly use shared `Kvt` table on `Ledger` and `Clique` lookup.
why:
Speeds up lookup time with `Aristo` backend. For writing `Clique` data,
the `Companion` model allows to write `Clique` data past the database
locked by evm transactions.
* Implement `CoreDb` profiling with API tracking
why:
Chasing time spent per APT procs ...
* Implement `Ledger` profiling with API tracking
why:
Chasing time spent per APT procs ...
* Always hashify when commiting or storing
why:
A dirty cache makes no sense when committing
* Make sure that a zero key is created when adding/updating vertices
why:
This is an error fix mainly for edge cases. A typical error was
that the root key got deleted when there were only a few vertices
left on the DB.
* Need all created and changed vertices zero-keyed on the cache
why:
A zero key (i.e. empty Merkle hash) indicates that a vertex key
needs to be updated. This would not be needed immediately after
a merge as there is an actual leaf path on the cache layer. But
after subsequent merge and delete operations this information
might get blurred.
* Re-org hashing algorithm
why:
Apart from errors, the previous implementation was too slow for
two reasons:
+ some control hashes were calculated for debugging (now all
verification is done in `aristo_check` module)
+ the leaf paths stored on the cache are used to build the
labelling (aka hashing) schedule; there paths were accumulated
over successive hash sessions although it is clear that all
keys were generated, already
* Kvt: Implemented multi-descriptor access on the same backend
why:
This behaviour mirrors the one of Aristo and can be used for
simultaneous transactions on Aristo + Kvt
* Kvt: Update database iterators
why:
Forgot to run on the top layer first
* Kvt: Misc fixes
* Aristo, use `openArray[byte]` rather than `Blob` in prototype
* Aristo, by default hashify right after cloning descriptor
why:
Typically, a completed descriptor is expected after cloning. Hashing
can be suppressed by argument flag.
* Aristo provides `replicate()` iterator, similar to legacy `replicate()`
* Aristo API fixes and updates
* CoreDB: Rename `legacy_persistent` => `legacy_rocksdb`
why:
More systematic, will be in line with Aristo DB which might have
more than one persistent backends
* CoreDB: Prettify API sources
why:
Better to read and maintain
details:
Annotating with custom pragmas which cleans up the prototypes
* CoreDB: Update MPT/put() prototype allowing `CatchableError`
why:
Will be needed for Aristo API (legacy is OK with `RlpError`)
* Remove concept of empty/blind filters
why:
Not needed. A non-existent filter is is coded as a nil reference.
* Slightly generalised backend iterators
why:
* VertexID as key for the ID generator state makes no sense
* there will be more tables addressed by non-VertexID keys
* Store serialised/blobified vertices on memory backend
why:
This is more in line with the RocksDB backend so more appropriate
for testing when comparing behaviour. For a speedy memory database,
a backend-less variant should be used.
* Drop the `Aristo` prefix from names `AristoLayerRef`, etc.
* Suppress compiler warning
why:
duplicate imports
* Add filter serialisation transcoder
why:
Will be used as storage format
* Nimbus folder environment update
details:
* Integrated `CoreDbRef` for the sources in the `nimbus` sub-folder.
* The `nimbus` program does not compile yet as it needs the updates
in the parallel `stateless` sub-folder.
* Stateless environment update
details:
* Integrated `CoreDbRef` for the sources in the `stateless` sub-folder.
* The `nimbus` program compiles now.
* Premix environment update
details:
* Integrated `CoreDbRef` for the sources in the `premix` sub-folder.
* Fluffy environment update
details:
* Integrated `CoreDbRef` for the sources in the `fluffy` sub-folder.
* Tools environment update
details:
* Integrated `CoreDbRef` for the sources in the `tools` sub-folder.
* Nodocker environment update
details:
* Integrated `CoreDbRef` for the sources in the
`hive_integration/nodocker` sub-folder.
* Tests environment update
details:
* Integrated `CoreDbRef` for the sources in the `tests` sub-folder.
* The unit tests compile and run cleanly now.
* Generalise `CoreDbRef` to any `select_backend` supported database
why:
Generalisation was just missed due to overcoming some compiler oddity
which was tied to rocksdb for testing.
* Suppress compiler warning for `newChainDB()`
why:
Warning was added to this function which must be wrapped so that
any `CatchableError` is re-raised as `Defect`.
* Split off persistent `CoreDbRef` constructor into separate file
why:
This allows to compile a memory only database version without linking
the backend library.
* Use memory `CoreDbRef` database by default
detail:
Persistent DB constructor needs to import `db/core_db/persistent
why:
Most tests use memory DB anyway. This avoids linking `-lrocksdb` or
any other backend by default.
* fix `toLegacyBackend()` availability check
why:
got garbled after memory/persistent split.
* Clarify raw access to MPT for snap sync handler
why:
Logically, `kvt` is not the raw access for the hexary trie (although
this holds for the legacy database)
previously, the withdrawal validation is in process_block only,
but the one in persist block, which is also used in synchronizer
is not validated properly.
* Recreating some of the speculative-execution code.
Not really using it yet. Also there's some new inefficiency in
memory.nim, but it's fixable - just haven't gotten around to it yet.
The big thing introduced here is the idea of "cells" for stack,
memory, and storage values. A cell is basically just a Future (though
there's also the option of making it an Identity - just a simple
distinct wrapper around a value - if you want to turn off the
asynchrony).
* Bumped nim-eth.
* Cleaned up a few comments.
* Bumped nim-secp256k1.
* Oops.
* Fixing a few compiler errors that show up with EVMC enabled.
* Update sync scheduler pool mode
why:
The pool mode allows to loop over active peers one after another. This
is ideal for soft re-starting peers. As this is a two tier experience
(start/stop, setup/release) the loop must be run twice. This is
controlled by a more rigid re-definition of how to use the `poolMode`
flag.
* Mitigate RLP serialiser deficiency
why:
Currently, serialising the `BlockBody` in not conevrtible and need
to be checked in the `eth` module. Currently a local fix for the
wire protocol applies. Unit tests will stay (after this local solution
will have been removed.)
* Code cosmetics and massage
details:
Main part is `types.toStr()` as a unified function for logging block
numbers.
* Allow to use a logical genesis replacement (start of history)
why:
Snap sync will set up an arbitrary pivot at a block number different
from zero. In fact, the higher the block number the better.
details:
A non-genesis start of history will currently only affect the score
values which were derived from the difficulty.
* Provide function to store the snap pivot block header in chain db
why:
Together with the start of history facility, this allows to proceed
with full syncing once snap has finished.
details:
Snap db storage was switched from a sub-tables to the flat chain db.
* Provide database completeness and sanity checker
details:
For debugging on smaller databases, only
* Implement snap -> full sync switch
simplify EVM and delegete those things to accounts cache.
also no more manual state clearing, accounts cache will be
responsible for both collecting touched account and perform
state clearing.
* Gwei conversion should use u256 because u64 can overflow.
* Make withdrawals follow the EIP-158 state-clearing rules.
(i.e. Empty accounts should be deleted.)
* Allow the zero address in normalizeNumber.
(Necessary for one of the new withdrawals-related tests.)
* Another fix with a withdrawals-related test.
* Gwei conversion should use u256 because u64 can overflow.
* Make withdrawals follow the EIP-158 state-clearing rules.
(i.e. Empty accounts should be deleted.)
* Allow the zero address in normalizeNumber.
(Necessary for one of the new withdrawals-related tests.)
* Part of EIP-4895: add withdrawals processing to block processing.
* Refactoring: extracted the engine API handler bodies into procs.
Intending to implement the V2 versions next. (I need the bodies to be
in separate procs so that multiple versions can use them.)
* Working on Engine API changes for Shanghai.
* Updated nim-web3, resolved ambiguity in Hash256 type.
* Updated nim-eth3 to point to master, now that I've merged that.
* I'm confused about what's going on with engine_client.
But let's try resolving this Hash256 ambiguity.
* Still trying to fix this conflict with the Hash256 types.
* Does this work now that nimbus-eth2 has been updated?
* Corrected blockValue in getPayload responses back to UInt256.
c834f67a37
* Working on getting the withdrawals-related tests to pass.
* Fixing more of those Hash256 ambiguities.
(I'm not sure why the nim-web3 library introduced a conflicting type
named Hash256, but right now I just want to get this code to compile again.)
* Bumped a couple of libraries to fix some error messages.
* Needed to get "make fluffy-tools" to pass, too.
* Getting "make nimbus_verified_proxy" to build.
* Refactoring in preparation for time-based forking.
* Timestamp-based hard-fork-transition.
* Workaround SideEffect issue / compiler bug for both failing locations in Portal history code
---------
Co-authored-by: kdeme <kim.demey@gmail.com>
* Removed some Windows specific unit test annoyances
details:
+ Short put()/get() cycles on persistent database have a race condition
with vendor rocksdb. On a specific (and slow) qemu/win7 a 50ms `sleep()`
in between will mostly do the job (i.e. unless heavy CPU load.) This
issue was not observed on github/ci.
+ Removed annoyances when qemu/Win7 keeps the rocksdb database files
locked even after closing the db. The problem is solved by strictly
using fresh names for each test. No assumption made to be able to
properly clean up. This issue was not observed on github/ci.
* Silence some compiler gossip -- part 7, misc/non(sync or graphql)
details:
Adding some missing exception annotation
andri lim
Jordan Hrycaj
Jacek Sieka
tersec
Etan Kissling
BiKangNing
web3-developer
Kim De Mey
Adam Spitz