* Improve logging and logging options in Fluffy
- Allow selection of log format, including:
- JSON
- automatic selection based on tty
- Allow log levels per topic configured on cli
* Update sync scheduler pool mode
why:
The pool mode allows to loop over active peers one after another. This
is ideal for soft re-starting peers. As this is a two tier experience
(start/stop, setup/release) the loop must be run twice. This is
controlled by a more rigid re-definition of how to use the `poolMode`
flag.
* Mitigate RLP serialiser deficiency
why:
Currently, serialising the `BlockBody` in not conevrtible and need
to be checked in the `eth` module. Currently a local fix for the
wire protocol applies. Unit tests will stay (after this local solution
will have been removed.)
* Code cosmetics and massage
details:
Main part is `types.toStr()` as a unified function for logging block
numbers.
* Allow to use a logical genesis replacement (start of history)
why:
Snap sync will set up an arbitrary pivot at a block number different
from zero. In fact, the higher the block number the better.
details:
A non-genesis start of history will currently only affect the score
values which were derived from the difficulty.
* Provide function to store the snap pivot block header in chain db
why:
Together with the start of history facility, this allows to proceed
with full syncing once snap has finished.
details:
Snap db storage was switched from a sub-tables to the flat chain db.
* Provide database completeness and sanity checker
details:
For debugging on smaller databases, only
* Implement snap -> full sync switch
- Remove failing on withdrawalsRoot to allow Shanghai BlockHeader.
Still need to add real checks in block header / body validation.
- Add withdrawals array to Block object for JSON-RPC API
* Somewhat tighten error handling
why:
Zombie state is invoked when the current peer turns out to be useless
for further communication. While there is a chance to further talk
to a peer about another topic (aka healing) after some protocol failure,
it makes no sense to do so after a network problem.
The latter state is explained bu the `peerDegraded` flag that goes
together with the `zombie` state flag. A degraded peer is dropped
immediately.
* Remove `--sync-mode=snapCtx` option, always start snap in recovery mode
why:
No need for a snap sync option without recovery mode, can be achieved
by deleting the database.
* Code cosmetics, typos, prettify logging, debugging helper, etc.
* Split off snap sync sub-mode handler into separate modules
details:
The original `worker.nim` source has become a multiplexer for several
snap sync sub-modes `full` and `snap`. The source modules of the
incarnations of a particular sync sub-mode are places into the
`worker/play` directory.
* Update ticker for snap and full sync logging
* Fix fringe condition for `GetStorageRanges` message handler
why:
Receiving a proved empty range was not considered at all. This lead to
inconsistencies of the return value which led to subsequent errors.
* Update storage range bulk download
details;
Mainly re-org of storage queue processing in `storage_queue_helper.nim`
* Update logging variables/messages
* Update storage slots healing
details:
Mainly clean up after improved helper functions from the sources
`find_missing_nodes.nim` and `storage_queue_helper.nim`.
* Simplify account fetch
why:
To much fuss made tolerating some errors. There will be an overall
strategy implemented where the concert of download and healing function
is orchestrated.
* Add error resilience to the concert of download and healing.
why:
The idea is that a peer might stop serving snap/1 accounts and storage
slot downloads while still able to support fetching nodes for healing.
Allow for the Fluffy Portal bridge to inject receipts. This
requires a web3 endpoint to be provided, and currently only
Alchemy is supported due to the used JSON-RPC endpoint.
* Update nearby/neighbour leaf nodes finder
details:
Update return error codes so that in the case that there is no more
leaf node beyond the search direction, the particular error code
`NearbyBeyondRange` is returned.
* Compile largest interval range containing only this leaf point
why:
Will be needed in snap sync for adding single leaf nodes to the range
of already allocated nodes.
* Reorg `hexary_inspect.nim`
why:
Merged the nodes collecting algorithm for persistent and in-memory
into a single generic function `hexary_inspect.inspectTrieImpl()`
* Update fetching accounts range failure handling in `rangeFetchAccounts()`
why:
Rejected response leads now to fetching for another account range. Only
repeated failures (or all done) terminate the algorithm.
* Update accounts healing
why:
+ Fixed looping over a bogus node response that could not inserted into
the database. As a solution, these nodes are locally registered and not
asked for in this download cycle.
+ Sub-optimal handling of interval range for a healed account leaf node.
Now the maximal range interval containing this node is registered as
processed which leafs to de-fragementation of the processed (and
unprocessed) range list(s). So *gap* ranges which are known not to
cover any account leaf node are not asked for on the network, anymore.
+ Sporadically remove empty interval ranges (if any)
* Update logging, better variable names
It is only (mostly) a skeleton, not further developed and not
used. It is unlikely the way forward either when further
developing the Portal state network.
t8n: a silly bug contract address generator, should use original
tx nonce instead of read the nonce from sender address in state db.
Although in EVM contract address generated by reading nonce from state db
is correct, outside EVM that nonce value might have been modified,
thus generating incorrect contract address.
accounts cache: when clearing account storage, the originalValue
cache is not cleared, only the storageRoot set to empty storage root,
this will cause getStorage and getCommitedStorage return wrong value
if the originalValue cache contains old value.
* Redesign snap1 message GetTrieNodes argument prototypes
why:
A list of sub-objects `seq[SnapTriePath]` is more intuitive to work with
than an opaque definition `seq[seq[Blob]]` because the inner object
`SnapTriePath` object has a dedicated inner structure (for how to
interprete `seq[Blob]`.)
* Collect some public constants into `constants.nim` file
* Reorg `hexary_paths.nim`
why:
+ Collecting nodes following a partial path properly ending at an
extension node failed to collect this last node.
+ Merged the nodes collecting algorithm for persistent and in-memory
into a single generic function `hexary_paths.rootPathExtend()`
info:
Extracted common tasks to `hexary_nodes_helper.nim`
* Implement `StorageRanges` message handler for snap/1 protocol
now macro assembler support merge fork, shanghai, etc without using ugly hack.
also each assembler test have their own `setup` section that can access
`vmState` and perform various custom setup.
simplify EVM and delegete those things to accounts cache.
also no more manual state clearing, accounts cache will be
responsible for both collecting touched account and perform
state clearing.
* Gwei conversion should use u256 because u64 can overflow.
* Make withdrawals follow the EIP-158 state-clearing rules.
(i.e. Empty accounts should be deleted.)
* Allow the zero address in normalizeNumber.
(Necessary for one of the new withdrawals-related tests.)
* Another fix with a withdrawals-related test.
* Add state root to node steps path register `RPath` or `XPath`
why:
Typically, the first node in the path register is the state root. There
are occasions, when the path register is empty (i.e. there are no node
references) which typically applies to a zero node key.
In order to find the next node key greater than zero, the state root is
is needed which is now part of the `RPath` or `XPath` data types.
* Extracted hexary tree debugging functions into separate files
* Update empty path fringe case for left/right node neighbour
why:
When starting at zero, the node steps path register would be empty. So
will any path that is before the fist non-zero link of a state root (if
it is a `Branch` node.)
The `hexaryNearbyRight()` or `hexaryNearbyLeft()` function required a
non-zero node steps path register. Now the first node is to be advanced
starting at the first state root link if necessary.
* Simplify/reorg neighbour node finder
why:
There was too mach code repetition for the cases
* persistent or in-memory database
* left or right move
details:
Most algorithms apply for persistent and in-memory alike. Using
templates/generic functions most of these algorithms can be stated
in a unified way
* Update storage slots snap/1 handler
details:
Minor changes to be more debugging friendly.
* Fix detection of full database for snap sync
* Docu: Snap sync test & debugging scenario
* Gwei conversion should use u256 because u64 can overflow.
* Make withdrawals follow the EIP-158 state-clearing rules.
(i.e. Empty accounts should be deleted.)
* Allow the zero address in normalizeNumber.
(Necessary for one of the new withdrawals-related tests.)
* Handle last/all node(s) proof conditions at leaf node extractor
detail:
Flag whether the maximum extracted node is the last one in database
No proof needed if the full tree was extracted
* Clean up some helpers & definitions
details:
Move entities to more plausible locations, e.g. `Account` object need
not be dealt with in the range extractor as it applies to any kind of
leaf data.
* Fix next/prev database walk fringe condition
details:
First check needed might be for a leaf node which was done too late.
* Homogenise snap/1 protocol function prototypes
why:
The range arguments `origin` and `limit` data types differed in various
function prototypes (`Hash256` vs. `openArray[byte]`.)
* Implement `GetStorageRange` handler
* Implement server timeout for leaf node retrieval
why:
This feature leaves control on the server for probably costly action
invoked by the network
* Implement maximal reply size for snap service
why:
This feature leaves control on the server for probably costly action
invoked by the network.
* Part of EIP-4895: add withdrawals processing to block processing.
* Refactoring: extracted the engine API handler bodies into procs.
Intending to implement the V2 versions next. (I need the bodies to be
in separate procs so that multiple versions can use them.)
* Working on Engine API changes for Shanghai.
* Updated nim-web3, resolved ambiguity in Hash256 type.
* Updated nim-eth3 to point to master, now that I've merged that.
* I'm confused about what's going on with engine_client.
But let's try resolving this Hash256 ambiguity.
* Still trying to fix this conflict with the Hash256 types.
* Does this work now that nimbus-eth2 has been updated?
* Corrected blockValue in getPayload responses back to UInt256.
c834f67a37
* Working on getting the withdrawals-related tests to pass.
* Fixing more of those Hash256 ambiguities.
(I'm not sure why the nim-web3 library introduced a conflicting type
named Hash256, but right now I just want to get this code to compile again.)
* Bumped a couple of libraries to fix some error messages.
* Needed to get "make fluffy-tools" to pass, too.
* Getting "make nimbus_verified_proxy" to build.
* Clean up some function prototypes
why:
Simplify polymorphic prototype variances for easier maintenance.
* Fix fringe condition crash when importing bogus RLP node
why:
Accessing non-list RLP entry as a list causes `Defect`
* Fix left boundary proof at range extractor
why:
Was insufficient. The main problem was that there was no unit test for
the validity of the generated left boundary.
* Handle incomplete left boundary proofs early
why:
Attempt to do it later leads to overly complex code in order to prevent
looping when the same peer repeats to send the same incomplete proof.
Contrary, gaps in the leaf sequence can be handled gracefully with
registering the gaps
* Implement a manual pivot setup mechanism for snap sync
why:
For a test scenario it is convenient to set the pivot to something
lower than the beacon header from the consensus layer. This does not
need rely on any RPC mechanism.
details:
The file containing the pivot specs is specified by the
`--sync-ctrl-file` option. It is regularly parsed for updates.
* Fix calculation error
why:
Prevent from calculating negative square root
why:
The peer manager runs concurrently to the discovery scheme. So the p2p
peer observer will also present `peer` non-static entries. Previously,
this peer manager throw an assert defect when this happened.
Kim De Mey
jangko
Jordan Hrycaj
Adam Spitz
Zahary Karadjov