* Fix kvt headers
* Provide differential layers for KVT transaction stack
why:
Significant performance improvement
* Provide abstraction layer for database top cache layer
why:
This will eventually implemented as a differential database layers
or transaction layers. The latter is needed to improve performance.
behavioural changes:
Zero vertex and keys (i.e. delete requests) are not optimised out
until the last layer is written to the database.
* Provide differential layers for Aristo transaction stack
why:
Significant performance improvement
* Activate `LedgerRef` wrapper for `AccountsCache`
details:
`accounts_cache.nim` methods are indirectly processed by the wrapper
methods from `ledger.nim`.
This works for all sources except `test_state_db.nim` where the source
`accounts_cache.nim` is included (rather than imported) in order to
access objects privy to the very source.
* Provide facility to switch to a preselected `LedgerRef` type
details:
Can be set as suggestion when initialising `CommonRef`
* Update `CoreDb` test suite for better time tracking
details:
+ Allow time logging by pre-defined block intervals
+ Print `CoreDb`/`Ledger`profiling results (if enabled)
* Explicitly use shared `Kvt` table on `Ledger` and `Clique` lookup.
why:
Speeds up lookup time with `Aristo` backend. For writing `Clique` data,
the `Companion` model allows to write `Clique` data past the database
locked by evm transactions.
* Implement `CoreDb` profiling with API tracking
why:
Chasing time spent per APT procs ...
* Implement `Ledger` profiling with API tracking
why:
Chasing time spent per APT procs ...
* Always hashify when commiting or storing
why:
A dirty cache makes no sense when committing
* Make sure that a zero key is created when adding/updating vertices
why:
This is an error fix mainly for edge cases. A typical error was
that the root key got deleted when there were only a few vertices
left on the DB.
* Need all created and changed vertices zero-keyed on the cache
why:
A zero key (i.e. empty Merkle hash) indicates that a vertex key
needs to be updated. This would not be needed immediately after
a merge as there is an actual leaf path on the cache layer. But
after subsequent merge and delete operations this information
might get blurred.
* Re-org hashing algorithm
why:
Apart from errors, the previous implementation was too slow for
two reasons:
+ some control hashes were calculated for debugging (now all
verification is done in `aristo_check` module)
+ the leaf paths stored on the cache are used to build the
labelling (aka hashing) schedule; there paths were accumulated
over successive hash sessions although it is clear that all
keys were generated, already
* Fix copyright year
* Show elapsed times with enabled `CoreDb` API tracking
* Show elapsed times with enabled `LedgerRef` API tracking
* Reorg `CoreDb` auto destructors for `Aristo` DB
why:
While `Aristo` supports some parallelism for concurrent database access,
this comes with a price of management overhead. With a naive approach,
the auto-destructor will slow down execution because the ledger and
evm treat the database in a shared mode where a DB descriptor is just
created and thrown away shortly after.
This is reflected in the `Coredb` abstraction layer above `Aristo`/`Kvt`
where a few `Shared` type descriptors are cached and a shared reference
is returned rather than a disposable new object.
* For `CoreDb` support transaction level tracking
details:
This is mainly an extra for the legacy DB as `Aristo` and `Kvt` support
this already.
Also return an error on the legacy DB backend when `persistent()` is
called while there are transactions pending (the `persistent()` call
does nothing otherwise on the legacy backend.)
* Clear compiler warnings (remove unused variables etc.)
* Using different `tmp` directories for `Kvt` and `Aristo`
why:
Closing one database would leave the other set of directories
incomplete.
* Code cosmetics, silence compiler
* Fix typo `EMPTY_ROOT_HASH` vs. `EMPTY_CODE_HASH`
* Fix copyright years
* Split off `ReadOnlyStateDB` from `AccountStateDB` from `state_db.nim`
why:
Apart from testing, applications use `ReadOnlyStateDB` as an easy
way to access the accounts ledger. This is well supported by the
`Aristo` db, but writable mode is only parially supported.
The writable AccountStateDB` object for modifying accounts is not
used by production code.
So, for lecgacy and testing apps, the full support of the previous
`AccountStateDB` is now enabled by `import db/state_db/read_write`
and the `import db/state_db` provides read-only mode.
* Encapsulate `AccountStateDB` as `GenesisLedgerRef` or genesis creation
why:
`AccountStateDB` has poor support for `Aristo` and is not widely used
in favour of `AccountsLedger` (which will be abstracted as `ledger`.)
Currently, using other than the `AccountStateDB` ledgers within the
`GenesisLedgerRef` wrapper is experimental and test only. Eventually,
the wrapper should disappear so that the `Ledger` object (which
encapsulates `AccountsCache` and `AccountsLedger`) will prevail.
* For the `Ledger`, provide access to raw accounts `MPT`
why:
This gives to the `CoreDbMptRef` descriptor from the `CoreDb` (which is
the legacy version of CoreDxMptRef`.) For the new `ledger` API, the
accounts are based on the `CoreDxMAccRef` descriptor which uses a
particular sub-system for accounts while legacy applications use the
`CoreDbPhkRef` equivalent of the `SecureHexaryTrie`.
The only place where this feature will currently be used is the
`genesis.nim` source file.
* Fix `Aristo` bugs, missing boundary checks, typos, etc.
* Verify root vertex in `MPT` and account constructors
why:
Was missing so far, in particular the accounts constructor must
verify `VertexID(1)
* Fix include file
* Disable `TransactionID` related functions from `state_db.nim`
why:
Functions `getCommittedStorage()` and `updateOriginalRoot()` from
the `state_db` module are nowhere used. The emulation of a legacy
`TransactionID` type functionality is administratively expensive to
provide by `Aristo` (the legacy DB version is only partially
implemented, anyway).
As there is no other place where `TransactionID`s are used, they will
not be provided by the `Aristo` variant of the `CoreDb`. For the
legacy DB API, nothing will change.
* Fix copyright headers in source code
* Get rid of compiler warning
* Update Aristo code, remove unused `merge()` variant, export `hashify()`
why:
Adapt to upcoming `CoreDb` wrapper
* Remove synced tx feature from `Aristo`
why:
+ This feature allowed to synchronise transaction methods like begin,
commit, and rollback for a group of descriptors.
+ The feature is over engineered and not needed for `CoreDb`, neither
is it complete (some convergence features missing.)
* Add debugging helpers to `Kvt`
also:
Update database iterator, add count variable yield argument similar
to `Aristo`.
* Provide optional destructors for `CoreDb` API
why;
For the upcoming Aristo wrapper, this allows to control when certain
smart destruction and update can take place. The auto destructor works
fine in general when the storage/cache strategy is known and acceptable
when creating descriptors.
* Add update option for `CoreDb` API function `hash()`
why;
The hash function is typically used to get the state root of the MPT.
Due to lazy hashing, this might be not available on the `Aristo` DB.
So the `update` function asks for re-hashing the gurrent state changes
if needed.
* Update API tracking log mode: `info` => `debug
* Use shared `Kvt` descriptor in new Ledger API
why:
No need to create a new descriptor all the time
* Aristo: Provide key-value list signature calculator
detail:
Simple wrappers around `Aristo` core functionality
* Update new API for `CoreDb`
details:
+ Renamed new API functions `contains()` => `hasKey()` or `hasPath()`
which disables the `in` operator on non-boolean `contains()` functions
+ The functions `get()` and `fetch()` always return a not-found error if
there is no item, available. The new functions `getOrEmpty()` and
`mergeOrEmpty()` return an an empty `Blob` if there is no such key
found.
* Rewrite `core_apps.nim` using new API from `CoreDb`
* Use `Aristo` functionality for calculating Merkle signatures
details:
For debugging, the `VerifyAristoForMerkleRootCalc` can be set so
that `Aristo` results will be verified against the legacy versions.
* Provide general interface for Merkle signing key-value tables
details:
Export `Aristo` wrappers
* Activate `CoreDb` tests
why:
Now, API seems to be stable enough for general tests.
* Update `toHex()` usage
why:
Byteutils' `toHex()` is superior to `toSeq.mapIt(it.toHex(2)).join`
* Split `aristo_transcode` => `aristo_serialise` + `aristo_blobify`
why:
+ Different modules for different purposes
+ `aristo_serialise`: RLP encoding/decoding
+ `aristo_blobify`: Aristo database encoding/decoding
* Compacted representation of small nodes' links instead of Keccak hashes
why:
Ethereum MPTs use Keccak hashes as node links if the size of an RLP
encoded node is at least 32 bytes. Otherwise, the RLP encoded node
value is used as a pseudo node link (rather than a hash.) Such a node
is nor stored on key-value database. Rather the RLP encoded node value
is stored instead of a lode link in a parent node instead. Only for
the root hash, the top level node is always referred to by the hash.
This feature needed an abstraction of the `HashKey` object which is now
either a hash or a blob of length at most 31 bytes. This leaves two
ways of representing an empty/void `HashKey` type, either as an empty
blob of zero length, or the hash of an empty blob.
* Update `CoreDb` interface (mainly reducing logger noise)
* Fix copyright years (to make `Lint` happy)
* Make sure that storage tries are not pruned (by default) on the new Ledger API
why:
Pruning might kill some unwanted entries from storage tries ending up with an unstable database
leading to crashes.
* Implement `CoreDb` and `LedgerRef` API tracing
details:
+ Locally enabled at compile time via constants `ProvideCoreDbLegacyAPI`
and `EnableApiTracking` in either `base.nim` source
+ If enabled it can be selectively turned on/off via public switches in
the `CoreDb` descriptor.
* Allow suppressing opportunistic `ifNecessaryGetXxx()` functions
why:
Better troubleshooting when the system crashes (assertions will then
most probably happen outside an `async` function.)
* Provide TDD/debug facility for inspecting `persistBlocks()` working
detail:
+ Make sure that the last block of a test sample is the first batch
item in `persistBlocks()`.
+ Additionally, allow `AccountsCache` API tracing by setting the flag
`extraTraceMessages = true` in the file `accounts_cache.nim`
* Overload AccountsCache by abstraction wrapper
details:
Can facilitate CoreDb API switch, details in `ledger/README.md`.
* CoreDB: Re-org API
details:
Legacy API internally uses vertex ID for root node abstraction
* Cosmetics: Move some unit test helpers to common sub-directory
* Extract constant from `accouns_cache.nim` => `constants.nim`
* Fix tracer methods
why:
Logger dump data were wrongly dumped from the production database. This
caused an assert exception when iterating over the persistent database
(instead of the memory logger.) This event in turn was enabled after
fixing another inconsistency which just set up an empty iterator. Unit
tests failed to detect that.
* Split `core_db/base.nim` into several sources
* Rename `core_db/legacy.nim` => `core_db/legacy_db.nim`
* Update `CoreDb` API, dual methods returning `Result[]` or plain value
detail:
Plain value methods implemet the legacy API, they defect on error results
* Redesign `CoreDB` direct backend access
why:
Made the `backend` directive integral part of the API
* Discontinue providing unused or otherwise available functions
details:
+ setTransactionID() removed, not used and not easily replicable in Aristo
+ maybeGet() removed, available via direct backend access
+ newPhk() removed, never used & was experimental anyway
* Update/reorg backend API
why:
+ Added error print function `$$()`
+ General descriptor completion (and optional validation) via `bless()`
* Update `Aristo`/`Kvt` exception handling
why:
Avoid `CatchableError` exceptions, rather pass them as error code where
appropriate.
* More `CoreDB` compliant `Aristo` and `Kvt` methods
details:
+ Providing functions like `contains()`, `getVtxRc()` (returns `Result[]`).
+ Additional error code: `NotImplemented`
* Rewrite/reorg of Aristo DB constructor
why:
Previously used global object `DefaultQidLayoutRef` as default
initialiser. This object was created at compile time which lead to
non-gc safe functions.
* Update nimbus/db/core_db/legacy_db.nim
Co-authored-by: Kim De Mey <kim.demey@gmail.com>
* Update nimbus/db/aristo/aristo_transcode.nim
Co-authored-by: Kim De Mey <kim.demey@gmail.com>
* Update nimbus/db/core_db/legacy_db.nim
Co-authored-by: Kim De Mey <kim.demey@gmail.com>
---------
Co-authored-by: Kim De Mey <kim.demey@gmail.com>
* Kvt: Implemented multi-descriptor access on the same backend
why:
This behaviour mirrors the one of Aristo and can be used for
simultaneous transactions on Aristo + Kvt
* Kvt: Update database iterators
why:
Forgot to run on the top layer first
* Kvt: Misc fixes
* Aristo, use `openArray[byte]` rather than `Blob` in prototype
* Aristo, by default hashify right after cloning descriptor
why:
Typically, a completed descriptor is expected after cloning. Hashing
can be suppressed by argument flag.
* Aristo provides `replicate()` iterator, similar to legacy `replicate()`
* Aristo API fixes and updates
* CoreDB: Rename `legacy_persistent` => `legacy_rocksdb`
why:
More systematic, will be in line with Aristo DB which might have
more than one persistent backends
* CoreDB: Prettify API sources
why:
Better to read and maintain
details:
Annotating with custom pragmas which cleans up the prototypes
* CoreDB: Update MPT/put() prototype allowing `CatchableError`
why:
Will be needed for Aristo API (legacy is OK with `RlpError`)
* Nimbus folder environment update
details:
* Integrated `CoreDbRef` for the sources in the `nimbus` sub-folder.
* The `nimbus` program does not compile yet as it needs the updates
in the parallel `stateless` sub-folder.
* Stateless environment update
details:
* Integrated `CoreDbRef` for the sources in the `stateless` sub-folder.
* The `nimbus` program compiles now.
* Premix environment update
details:
* Integrated `CoreDbRef` for the sources in the `premix` sub-folder.
* Fluffy environment update
details:
* Integrated `CoreDbRef` for the sources in the `fluffy` sub-folder.
* Tools environment update
details:
* Integrated `CoreDbRef` for the sources in the `tools` sub-folder.
* Nodocker environment update
details:
* Integrated `CoreDbRef` for the sources in the
`hive_integration/nodocker` sub-folder.
* Tests environment update
details:
* Integrated `CoreDbRef` for the sources in the `tests` sub-folder.
* The unit tests compile and run cleanly now.
* Generalise `CoreDbRef` to any `select_backend` supported database
why:
Generalisation was just missed due to overcoming some compiler oddity
which was tied to rocksdb for testing.
* Suppress compiler warning for `newChainDB()`
why:
Warning was added to this function which must be wrapped so that
any `CatchableError` is re-raised as `Defect`.
* Split off persistent `CoreDbRef` constructor into separate file
why:
This allows to compile a memory only database version without linking
the backend library.
* Use memory `CoreDbRef` database by default
detail:
Persistent DB constructor needs to import `db/core_db/persistent
why:
Most tests use memory DB anyway. This avoids linking `-lrocksdb` or
any other backend by default.
* fix `toLegacyBackend()` availability check
why:
got garbled after memory/persistent split.
* Clarify raw access to MPT for snap sync handler
why:
Logically, `kvt` is not the raw access for the hexary trie (although
this holds for the legacy database)
why:
* Resolves some compiler coughing when it bails out on persitent
db constructor inside `test()` caluses (works perfectly outside.)
* API looks cleaner and better to maintain for the price of slightly
more work at the backend
* Remove 32bit os support from `custom_network` unit test
also:
* Fix compilation annoyance #1648
* Fix unit test on Kiln (changed `merge` logic?)
* Hide unused sources do not compile
why:
* Get them out of the way before major update
* Import and function prototype mismatch -- maybe some changes got out
of scope.
* Re-implemented `db_chain` as `core_db`
why:
Hiding `TrieDatabaseRef` and `HexaryTrie` by default allows to replace
the current db wrapper by some other one, e.g. Aristo
* Support compiler exception warnings for CoreDbRef base methods.
* Allow `pairs()` iterator on all memory based key-value tables
why:
Previously only available for capture recorder.
* Backport `chain_db.nim` changes into its re-implementation `core_apps.nim`
* Fix exception annotation
Jordan Hrycaj
jangko
Kim De Mey