* renamed nimbus folder to execution_chain
* Renamed "nimbus" references to "execution_chain"
* fixed wrongly changed http reference
* delete snap types file given that it was deleted before this PR merge
* missing 'execution_chain' replacement
---------
Co-authored-by: pmmiranda <pedro.miranda@nimbus.team>
* aristo: fork support via layers/txframes
This change reorganises how the database is accessed: instead holding a
"current frame" in the database object, a dag of frames is created based
on the "base frame" held in `AristoDbRef` and all database access
happens through this frame, which can be thought of as a consistent
point-in-time snapshot of the database based on a particular fork of the
chain.
In the code, "frame", "transaction" and "layer" is used to denote more
or less the same thing: a dag of stacked changes backed by the on-disk
database.
Although this is not a requirement, in practice each frame holds the
change set of a single block - as such, the frame and its ancestors
leading up to the on-disk state represents the state of the database
after that block has been applied.
"committing" means merging the changes to its parent frame so that the
difference between them is lost and only the cumulative changes remain -
this facility enables frames to be combined arbitrarily wherever they
are in the dag.
In particular, it becomes possible to consolidate a set of changes near
the base of the dag and commit those to disk without having to re-do the
in-memory frames built on top of them - this is useful for "flattening"
a set of changes during a base update and sending those to storage
without having to perform a block replay on top.
Looking at abstractions, a side effect of this change is that the KVT
and Aristo are brought closer together by considering them to be part of
the "same" atomic transaction set - the way the code gets organised,
applying a block and saving it to the kvt happens in the same "logical"
frame - therefore, discarding the frame discards both the aristo and kvt
changes at the same time - likewise, they are persisted to disk together
- this makes reasoning about the database somewhat easier but has the
downside of increased memory usage, something that perhaps will need
addressing in the future.
Because the code reasons more strictly about frames and the state of the
persisted database, it also makes it more visible where ForkedChain
should be used and where it is still missing - in particular, frames
represent a single branch of history while forkedchain manages multiple
parallel forks - user-facing services such as the RPC should use the
latter, ie until it has been finalized, a getBlock request should
consider all forks and not just the blocks in the canonical head branch.
Another advantage of this approach is that `AristoDbRef` conceptually
becomes more simple - removing its tracking of the "current" transaction
stack simplifies reasoning about what can go wrong since this state now
has to be passed around in the form of `AristoTxRef` - as such, many of
the tests and facilities in the code that were dealing with "stack
inconsistency" are now structurally prevented from happening. The test
suite will need significant refactoring after this change.
Once this change has been merged, there are several follow-ups to do:
* there's no mechanism for keeping frames up to date as they get
committed or rolled back - TODO
* naming is confused - many names for the same thing for legacy reason
* forkedchain support is still missing in lots of code
* clean up redundant logic based on previous designs - in particular the
debug and introspection code no longer makes sense
* the way change sets are stored will probably need revisiting - because
it's a stack of changes where each frame must be interrogated to find an
on-disk value, with a base distance of 128 we'll at minimum have to
perform 128 frame lookups for *every* database interaction - regardless,
the "dag-like" nature will stay
* dispose and commit are poorly defined and perhaps redundant - in
theory, one could simply let the GC collect abandoned frames etc, though
it's likely an explicit mechanism will remain useful, so they stay for
now
More about the changes:
* `AristoDbRef` gains a `txRef` field (todo: rename) that "more or less"
corresponds to the old `balancer` field
* `AristoDbRef.stack` is gone - instead, there's a chain of
`AristoTxRef` objects that hold their respective "layer" which has the
actual changes
* No more reasoning about "top" and "stack" - instead, each
`AristoTxRef` can be a "head" that "more or less" corresponds to the old
single-history `top` notion and its stack
* `level` still represents "distance to base" - it's computed from the
parent chain instead of being stored
* one has to be careful not to use frames where forkedchain was intended
- layers are only for a single branch of history!
* fix layer vtop after rollback
* engine fix
* Fix test_txpool
* Fix test_rpc
* Fix copyright year
* fix simulator
* Fix copyright year
* Fix copyright year
* Fix tracer
* Fix infinite recursion bug
* Remove aristo and kvt empty files
* Fic copyright year
* Fix fc chain_kvt
* ForkedChain refactoring
* Fix merge master conflict
* Fix copyright year
* Reparent txFrame
* Fix test
* Fix txFrame reparent again
* Cleanup and fix test
* UpdateBase bugfix and fix test
* Fixe newPayload bug discovered by hive
* Fix engine api fcu
* Clean up call template, chain_kvt, andn txguid
* Fix copyright year
* work around base block loading issue
* Add test
* Fix updateHead bug
* Fix updateBase bug
* Change func commitBase to proc commitBase
* Touch up and fix debug mode crash
---------
Co-authored-by: jangko <jangko128@gmail.com>
The current getCanonicalHead of core db should not be confused with ForkedChain.latestHeader.
Therefore we need to use getCanonicalHead to restricted case only, e.g. initializing ForkedChain.
In block processing, depending on the complexity of a transaction and
hotness of caches etc, signature checking can actually make up the
majority of time needed to process a transaction (60% observed in some
randomly sampled block ranges).
Fortunately, this is a task that trivially can be offloaded to a task
pool similar to how nimbus-eth2 does it.
This PR introduces taskpools in the most simple way possible, by
performing signature checking concurrently with other TX processing,
assigning a taskpool task per TX effectively.
With this little trick, we're in gigagas land 🎉 on my laptop!
```
INF 2024-12-10 21:05:35.170+01:00 Imported blocks
blockNumber=3874817 b... mgps=1222.707 ...
```
Tests don't use the taskpool for now because it needs manual cleanup and
we don't have a good mechanism in place. Future PR:s should address this
by creating a common shutdown sequence that also closes and cleans up
other resources like the DB.
Co-authored-by: andri lim <jangko128@gmail.com>
* prefer the spec-derived name where possible
* don't pass stateRoot to LedgerRef and friends (it doesn't do anything)
* add deprecation warning in graphql - it needs updating to use
forkedchain instead
* partial commit
* fixes
* remove converters too
* revert changes on nimbus_verified_proxy
* revert changes in converter
* revert changes(re-xport) in rpc_types
* update copyright year
* replace types in other binaries
* chain config bug
* fix rebase conflict imcomplete buffer
* fix more rebase buffers
* remove ditto types and converters
* fix the tests
* update copyright year
* init style for Hash256
https://github.com/status-im/nim-eth/pull/733 updates `Hash256` to
become an array instead of an object - unfortunately, nim does not allow
constructing arrays with `name()`, so this PR changes it to `default`
which works with both.
* lint
* Wiring ForkedChainRef to other components
- Disable majority of hive simulators
- Only enable pyspec_sim for the moment
- The pyspec_sim is using a smaller RPC service wired to ForkedChainRef
- The RPC service will gradually grow
* Addressing PR review
* Fix test_beacon/setup_env
* Enable consensus_sim (#2441)
* Enable consensus_sim
* Remove isFile check
* Enable Engine API jwt auth tests and exchange cap tests
* Enable engine api in build_sim.sh
* Wire ForkedChainRef to Engine API newPayload
* Wire Engine API getBodies to ForkedChainRef
* Wire Engine API api_forkchoice to ForkedChainRef
* Wire more RPC methods to ForkedChainRef
* Implement eth_syncing
* Implement eth_call and eth_getlogs
* TxPool: simplify smartHead
* Fix smartHead usage
* Fix txpool headDiff
* Remove hasBlockHeader and use headerExists
* Addressing review
* Bump nim-eth, nim-web3, nimbus-eth2
- Replace std.Option with results.Opt
- Fields name changes
* More fixes
* Fix Portal stream async raises and portal testnet Opt usage
* Bump eth + nimbus-eth2 + more fixes related to eth_types changes
* Fix in utp test app and nimbus-eth2 bump
* Fix test_blockchain_json rebase conflict
* Fix EVMC block_timestamp conversion plus commentary
---------
Co-authored-by: kdeme <kim.demey@gmail.com>
This PR consolidates the split header-body sequences into a single EthBlock
sequence and cleans up the fallout from that which significantly reduces
block processing overhead during import thanks to less garbage collection
and fewer copies of things all around.
Notably, since the number of headers must always match the number of bodies,
we also get rid of a pointless degree of freedom that in the future could
introduce unnecessary bugs.
* only read header and body from era file
* avoid several unnecessary copies along the block processing way
* simplify signatures, cleaning up unused arguemnts and returns
* use `stew/assign2` in a few strategic places where the generated
nim assignent is slow and add a few `move` to work around poor
analysis in nim 1.6 (will need to be revisited for 2.0)
```
stats-20240607_2223-a814aa0b.csv vs stats-20240608_0714-21c1d0a9.csv
bps_x bps_y tps_x tps_y bpsd tpsd timed
block_number
(498305, 713245] 1,540.52 1,809.73 2,361.58 2775.340189 17.63% 17.63% -14.92%
(713245, 928185] 730.36 865.26 1,715.90 2028.973852 18.01% 18.01% -15.21%
(928185, 1143126] 663.03 789.10 2,529.26 3032.490771 19.79% 19.79% -16.28%
(1143126, 1358066] 393.46 508.05 2,152.50 2777.578119 29.13% 29.13% -22.50%
(1358066, 1573007] 370.88 440.72 2,351.31 2791.896052 18.81% 18.81% -15.80%
(1573007, 1787947] 283.65 335.11 2,068.93 2441.373402 17.60% 17.60% -14.91%
(1787947, 2002888] 287.29 342.11 2,078.39 2474.179448 18.99% 18.99% -15.91%
(2002888, 2217828] 293.38 343.16 2,208.83 2584.77457 17.16% 17.16% -14.61%
(2217828, 2432769] 140.09 167.86 1,081.87 1296.336926 18.82% 18.82% -15.80%
blocks: 1934464, baseline: 3h13m1s, contender: 2h43m47s
bpsd (mean): 19.55%
tpsd (mean): 19.55%
Time (total): -29m13s, -15.14%
```
* Update README
* Nimbus-main: replaced `PruneMode` options by `ChainDbMode` options
details:
For the legacy database, this changes the phrase
- `conf.pruneMode == PruneMode.Full` to the expression
+ `conf.chainDbMode == ChainDbMode.Prune`.
* Fix issues moaned about by NIM compiler
* Fix copyright year
* Activate `LedgerRef` wrapper for `AccountsCache`
details:
`accounts_cache.nim` methods are indirectly processed by the wrapper
methods from `ledger.nim`.
This works for all sources except `test_state_db.nim` where the source
`accounts_cache.nim` is included (rather than imported) in order to
access objects privy to the very source.
* Provide facility to switch to a preselected `LedgerRef` type
details:
Can be set as suggestion when initialising `CommonRef`
* Update `CoreDb` test suite for better time tracking
details:
+ Allow time logging by pre-defined block intervals
+ Print `CoreDb`/`Ledger`profiling results (if enabled)
* Nimbus folder environment update
details:
* Integrated `CoreDbRef` for the sources in the `nimbus` sub-folder.
* The `nimbus` program does not compile yet as it needs the updates
in the parallel `stateless` sub-folder.
* Stateless environment update
details:
* Integrated `CoreDbRef` for the sources in the `stateless` sub-folder.
* The `nimbus` program compiles now.
* Premix environment update
details:
* Integrated `CoreDbRef` for the sources in the `premix` sub-folder.
* Fluffy environment update
details:
* Integrated `CoreDbRef` for the sources in the `fluffy` sub-folder.
* Tools environment update
details:
* Integrated `CoreDbRef` for the sources in the `tools` sub-folder.
* Nodocker environment update
details:
* Integrated `CoreDbRef` for the sources in the
`hive_integration/nodocker` sub-folder.
* Tests environment update
details:
* Integrated `CoreDbRef` for the sources in the `tests` sub-folder.
* The unit tests compile and run cleanly now.
* Generalise `CoreDbRef` to any `select_backend` supported database
why:
Generalisation was just missed due to overcoming some compiler oddity
which was tied to rocksdb for testing.
* Suppress compiler warning for `newChainDB()`
why:
Warning was added to this function which must be wrapped so that
any `CatchableError` is re-raised as `Defect`.
* Split off persistent `CoreDbRef` constructor into separate file
why:
This allows to compile a memory only database version without linking
the backend library.
* Use memory `CoreDbRef` database by default
detail:
Persistent DB constructor needs to import `db/core_db/persistent
why:
Most tests use memory DB anyway. This avoids linking `-lrocksdb` or
any other backend by default.
* fix `toLegacyBackend()` availability check
why:
got garbled after memory/persistent split.
* Clarify raw access to MPT for snap sync handler
why:
Logically, `kvt` is not the raw access for the hexary trie (although
this holds for the legacy database)
on windows, using "localhost" for rpc test is very slow.
both pyspec_sim and engine_sim will need more than one hour.
while on linux and macos only few minutes.
