* renamed nimbus folder to execution_chain
* Renamed "nimbus" references to "execution_chain"
* fixed wrongly changed http reference
* delete snap types file given that it was deleted before this PR merge
* missing 'execution_chain' replacement
---------
Co-authored-by: pmmiranda <pedro.miranda@nimbus.team>
* aristo: fork support via layers/txframes
This change reorganises how the database is accessed: instead holding a
"current frame" in the database object, a dag of frames is created based
on the "base frame" held in `AristoDbRef` and all database access
happens through this frame, which can be thought of as a consistent
point-in-time snapshot of the database based on a particular fork of the
chain.
In the code, "frame", "transaction" and "layer" is used to denote more
or less the same thing: a dag of stacked changes backed by the on-disk
database.
Although this is not a requirement, in practice each frame holds the
change set of a single block - as such, the frame and its ancestors
leading up to the on-disk state represents the state of the database
after that block has been applied.
"committing" means merging the changes to its parent frame so that the
difference between them is lost and only the cumulative changes remain -
this facility enables frames to be combined arbitrarily wherever they
are in the dag.
In particular, it becomes possible to consolidate a set of changes near
the base of the dag and commit those to disk without having to re-do the
in-memory frames built on top of them - this is useful for "flattening"
a set of changes during a base update and sending those to storage
without having to perform a block replay on top.
Looking at abstractions, a side effect of this change is that the KVT
and Aristo are brought closer together by considering them to be part of
the "same" atomic transaction set - the way the code gets organised,
applying a block and saving it to the kvt happens in the same "logical"
frame - therefore, discarding the frame discards both the aristo and kvt
changes at the same time - likewise, they are persisted to disk together
- this makes reasoning about the database somewhat easier but has the
downside of increased memory usage, something that perhaps will need
addressing in the future.
Because the code reasons more strictly about frames and the state of the
persisted database, it also makes it more visible where ForkedChain
should be used and where it is still missing - in particular, frames
represent a single branch of history while forkedchain manages multiple
parallel forks - user-facing services such as the RPC should use the
latter, ie until it has been finalized, a getBlock request should
consider all forks and not just the blocks in the canonical head branch.
Another advantage of this approach is that `AristoDbRef` conceptually
becomes more simple - removing its tracking of the "current" transaction
stack simplifies reasoning about what can go wrong since this state now
has to be passed around in the form of `AristoTxRef` - as such, many of
the tests and facilities in the code that were dealing with "stack
inconsistency" are now structurally prevented from happening. The test
suite will need significant refactoring after this change.
Once this change has been merged, there are several follow-ups to do:
* there's no mechanism for keeping frames up to date as they get
committed or rolled back - TODO
* naming is confused - many names for the same thing for legacy reason
* forkedchain support is still missing in lots of code
* clean up redundant logic based on previous designs - in particular the
debug and introspection code no longer makes sense
* the way change sets are stored will probably need revisiting - because
it's a stack of changes where each frame must be interrogated to find an
on-disk value, with a base distance of 128 we'll at minimum have to
perform 128 frame lookups for *every* database interaction - regardless,
the "dag-like" nature will stay
* dispose and commit are poorly defined and perhaps redundant - in
theory, one could simply let the GC collect abandoned frames etc, though
it's likely an explicit mechanism will remain useful, so they stay for
now
More about the changes:
* `AristoDbRef` gains a `txRef` field (todo: rename) that "more or less"
corresponds to the old `balancer` field
* `AristoDbRef.stack` is gone - instead, there's a chain of
`AristoTxRef` objects that hold their respective "layer" which has the
actual changes
* No more reasoning about "top" and "stack" - instead, each
`AristoTxRef` can be a "head" that "more or less" corresponds to the old
single-history `top` notion and its stack
* `level` still represents "distance to base" - it's computed from the
parent chain instead of being stored
* one has to be careful not to use frames where forkedchain was intended
- layers are only for a single branch of history!
* fix layer vtop after rollback
* engine fix
* Fix test_txpool
* Fix test_rpc
* Fix copyright year
* fix simulator
* Fix copyright year
* Fix copyright year
* Fix tracer
* Fix infinite recursion bug
* Remove aristo and kvt empty files
* Fic copyright year
* Fix fc chain_kvt
* ForkedChain refactoring
* Fix merge master conflict
* Fix copyright year
* Reparent txFrame
* Fix test
* Fix txFrame reparent again
* Cleanup and fix test
* UpdateBase bugfix and fix test
* Fixe newPayload bug discovered by hive
* Fix engine api fcu
* Clean up call template, chain_kvt, andn txguid
* Fix copyright year
* work around base block loading issue
* Add test
* Fix updateHead bug
* Fix updateBase bug
* Change func commitBase to proc commitBase
* Touch up and fix debug mode crash
---------
Co-authored-by: jangko <jangko128@gmail.com>
The current getCanonicalHead of core db should not be confused with ForkedChain.latestHeader.
Therefore we need to use getCanonicalHead to restricted case only, e.g. initializing ForkedChain.
In block processing, depending on the complexity of a transaction and
hotness of caches etc, signature checking can actually make up the
majority of time needed to process a transaction (60% observed in some
randomly sampled block ranges).
Fortunately, this is a task that trivially can be offloaded to a task
pool similar to how nimbus-eth2 does it.
This PR introduces taskpools in the most simple way possible, by
performing signature checking concurrently with other TX processing,
assigning a taskpool task per TX effectively.
With this little trick, we're in gigagas land 🎉 on my laptop!
```
INF 2024-12-10 21:05:35.170+01:00 Imported blocks
blockNumber=3874817 b... mgps=1222.707 ...
```
Tests don't use the taskpool for now because it needs manual cleanup and
we don't have a good mechanism in place. Future PR:s should address this
by creating a common shutdown sequence that also closes and cleans up
other resources like the DB.
Co-authored-by: andri lim <jangko128@gmail.com>
* Wiring ForkedChainRef to other components
- Disable majority of hive simulators
- Only enable pyspec_sim for the moment
- The pyspec_sim is using a smaller RPC service wired to ForkedChainRef
- The RPC service will gradually grow
* Addressing PR review
* Fix test_beacon/setup_env
* Enable consensus_sim (#2441)
* Enable consensus_sim
* Remove isFile check
* Enable Engine API jwt auth tests and exchange cap tests
* Enable engine api in build_sim.sh
* Wire ForkedChainRef to Engine API newPayload
* Wire Engine API getBodies to ForkedChainRef
* Wire Engine API api_forkchoice to ForkedChainRef
* Wire more RPC methods to ForkedChainRef
* Implement eth_syncing
* Implement eth_call and eth_getlogs
* TxPool: simplify smartHead
* Fix smartHead usage
* Fix txpool headDiff
* Remove hasBlockHeader and use headerExists
* Addressing review
* Bump nim-eth, nim-web3, nimbus-eth2
- Replace std.Option with results.Opt
- Fields name changes
* More fixes
* Fix Portal stream async raises and portal testnet Opt usage
* Bump eth + nimbus-eth2 + more fixes related to eth_types changes
* Fix in utp test app and nimbus-eth2 bump
* Fix test_blockchain_json rebase conflict
* Fix EVMC block_timestamp conversion plus commentary
---------
Co-authored-by: kdeme <kim.demey@gmail.com>
* CoreDb: Provide default db backend symbols
why:
Handy for running `Aristo` against standard tests
note:
These defaults are currently set to legacy DB types. The must be
enabled manually in `db/core_db.nim`.
* Provide `Aristo` for macro assembler related tests
caveat:
Some tests use `initStorageTrie()` which lets `Aristo` bail out. The
test need to run on `distinct_ledgers` (or something like) rather than
`distinct_tries`.
* Tests: Misc modules that can run on `Aristo` as well
* NoHive: Module that can run on `Aristo` as well
* Fix copyright year
* ditto
* Nimbus folder environment update
details:
* Integrated `CoreDbRef` for the sources in the `nimbus` sub-folder.
* The `nimbus` program does not compile yet as it needs the updates
in the parallel `stateless` sub-folder.
* Stateless environment update
details:
* Integrated `CoreDbRef` for the sources in the `stateless` sub-folder.
* The `nimbus` program compiles now.
* Premix environment update
details:
* Integrated `CoreDbRef` for the sources in the `premix` sub-folder.
* Fluffy environment update
details:
* Integrated `CoreDbRef` for the sources in the `fluffy` sub-folder.
* Tools environment update
details:
* Integrated `CoreDbRef` for the sources in the `tools` sub-folder.
* Nodocker environment update
details:
* Integrated `CoreDbRef` for the sources in the
`hive_integration/nodocker` sub-folder.
* Tests environment update
details:
* Integrated `CoreDbRef` for the sources in the `tests` sub-folder.
* The unit tests compile and run cleanly now.
* Generalise `CoreDbRef` to any `select_backend` supported database
why:
Generalisation was just missed due to overcoming some compiler oddity
which was tied to rocksdb for testing.
* Suppress compiler warning for `newChainDB()`
why:
Warning was added to this function which must be wrapped so that
any `CatchableError` is re-raised as `Defect`.
* Split off persistent `CoreDbRef` constructor into separate file
why:
This allows to compile a memory only database version without linking
the backend library.
* Use memory `CoreDbRef` database by default
detail:
Persistent DB constructor needs to import `db/core_db/persistent
why:
Most tests use memory DB anyway. This avoids linking `-lrocksdb` or
any other backend by default.
* fix `toLegacyBackend()` availability check
why:
got garbled after memory/persistent split.
* Clarify raw access to MPT for snap sync handler
why:
Logically, `kvt` is not the raw access for the hexary trie (although
this holds for the legacy database)
This is a workaround following hive example, because one of the test case
withdrawalsAmountBounds.json, have bad blocks between good blocks.
And that bad blocks contains big int too big to fit in uint64 of
withdrawal amount field.
Clients who still importing concatenated blocks cannot pass all tests.
previously, the withdrawal validation is in process_block only,
but the one in persist block, which is also used in synchronizer
is not validated properly.
Adds changes to Nimbus Hive support for the new
[Arrow Glacier fork](https://eips.ethereum.org/EIPS/eip-4345).
While here:
- Fix typo in `nimbus.sh`:
`HIVE_FORK_MUIRGLACIER` => `HIVE_FORK_MUIR_GLACIER` (just a comment).
- Add `muirGlacierBlock` to the JSON generated in `extract_consensus_data.nim`.
This makes it symmetric with the JSON parsed in `mapper.jq`.
- Removed "At5" network names which are not used by any of the test suite.
These are `ByzantiumToConstantinopleAt5`, `ConstantinopleFixToIstanbulAt5`
and `IstanbulToBerlinAt5`.
The motivation for removing these instead of systematically including all
possibilities was that I realised `LondonToArrowGlacierAt5` does not appear
anywhere in the current test suite, even though `ArrowGlacier` does. As each
section in the code is rather large already, I thought it cleaner to not add
this one, and keep only the ones the test suite actually uses.
This also now better matches the code in `test_blockchain_json.nim`.
- Sorted `HomesteadToDaoAt5` before `HomesteadToEIP150At5` because the DAO
fork happened earlier than EIP-150 in real life.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
this is a preparation for migration to confutils based config
although there is still some getConfiguration usage in tests code
it will be removed after new config arrived
* Re-adjust canonical head to parent of block to be inserted
why:
of the failing tests that remain to be solved, 30 of those will succeed
if the canonical database chain head is cleverly adjusted -- yes, it
looks like a hack, indeed.
details:
at the moment, this hack works for the non-hive tests only and is
triggered by a boolean argument passed on to the chain.persistBlocks()
method.
* Use parent instead of canonical head for block to be inserted
why:
side chains need to be inserted typically somewhere before the
canonical head.
details:
the previous _hack_ was unnecessary and removed, it was inspired by
some verification in persistBlocks() which explicitly referenced the
canonical head (which now might or might not refer to the newly inserted
header.)
* remove unnecessary code + comment
now we have hive simulators written in nim:
- ethereum/consensus
- ethereum/graphql
Using these simulators, we can debug test cases without have to run
hive or docker.
