* Add toContentKey helper functions.
* Implement typed lookup functions for getting account and storage trie nodes and bytecode.
* Re-implementation of recursive gossip.
* Offer validation improvements. Don't allow key end in Nibbles for leafs as defined in the spec.
* Minor refactor to validation and add addition bytecode check.
* Implemented offer validation interface.
* Implement high level offer validation steps.
* Completed state validation tests.
* Update validation to use result type.
* Update state proof verification tests to test offer verification.
* Query history network to get state root by block hash.
* Fix state network test and remove usage of CoreDb.
* Fix state network gossip test and PR comment updates.
* Add trieproof state validation tests and fix for short nodes.
* Introduce wrapper type for EIP-4844 transactions
EIP-4844 blob sidecars are a concept that only exists in the mempool.
After inclusion of a transaction into an execution block, only the
versioned hash within the transaction remains. To improve type safety,
replace the `Transaction.networkPayload` member with a wrapper type
`PooledTransaction` that is used in contexts where blob sidecars exist.
* Bump nimbus-eth2 to 87605d08a7f9cfc3b223bd32143e93a6cdf351ac
* IPv6 'listen-address' in `nimbus_verified_proxy`
* Bump nim-libp2p to 21cbe3a91a70811522554e89e6a791172cebfef2
* Fix beacon_lc_bridge payload conversion and conf.listenAddress type
* Change nimbus_verified_proxy.asExecutionData param to SomeExecutionPayload
* Rerun nph to fix asExecutionData style format
* nimbus_verified_proxy listenAddress
* Use PooledTransaction in nimbus-eth1 tests
---------
Co-authored-by: jangko <jangko128@gmail.com>
* Add retrieval content validation to state network.
* Complete state validation tests for retrieval content.
* Improve naming functions and parameters.
- Add post Bellatrix Beacon block proof exporting to
eth_data_exporter
- Rework the Bellatrix Beacon block proof exports to us yaml
format
- Move some common code of the two different beacon block proofs
to beacon_chain_block_proof_common module
- Move + add to yaml utils to be usable not just for the tests but
also for eth data exporter
* Remove references to CoreDb in Fluffy code.
* Add missing import.
* Remove coredb imports and use dynamic server port in tests.
* Fix formatting using nph.
Use the same scheme as for the nimbus.guide.
Two differences however:
- Set the dark scheme as default, considering the new nimbus.team
website also has dark as default.
- Remove the orange/amber for the light scheme, considering the
light version of nimbus.team has no more orange.
* Update README
* Nimbus-main: replaced `PruneMode` options by `ChainDbMode` options
details:
For the legacy database, this changes the phrase
- `conf.pruneMode == PruneMode.Full` to the expression
+ `conf.chainDbMode == ChainDbMode.Prune`.
* Fix issues moaned about by NIM compiler
* Fix copyright year
- The fluffy test vector repo got forked (well, copied rather) to
become the official one under ethereum github org, so we change
to that repo now and archive ours.
- Our repo also stored accumulator / historical_roots, replace
that with a new repo which is only for network configs.
- Several changes needed to be made due to test vectors that got
updated + some of them got changed to / are yaml format instead of
json.
- Use the new createRpcSigsFromNim for client json-rpc API
- Avoid importing any nimbus/rpc specifics, use only web3 and
fluffy local rpc code
- Adjust tools making use of the client side API
The --networks option is to select the networks alias the Portal
sub-protocols.
The --network option is deprecated and replaced with the
--portal-network option to avoid confusion with --networks option.
This commit also remove the --state flag which was a temporary
quick-fix.
* Add nph check to fluffy CI lint
* Add a section on nph usage in the fluffy.guide
* Update copyright years for altered files
* Avoid chained methods formatting style in db code
* Update nph in CI to v0.5
* Remove leftover commented import
* Move comment to avoid nph turning complex list into simple list (nph bug)
* Update nph in CI to v0.5.1
* Formatting fluffy with nph v0.5.1
This would currently manifest sometimes in state gossip test in
CI or locally. But could occur on fluffy binary in case state
network is enable and data is gossiped.
- Add Era1 helpers to be able to iterate fast over block tuples
and individual total difficulties
- Add buildAccumulator from Era1 file
- Add Era1 based BlockHeader with proof + bodies/receipts gossip
calls
- Add new JSON-RPC debug methods to be able to test the above
with a standalone fluffy node
* Initial implementation of era1 + export + verify
Initial implementation of era1 + export and verify command in the
existing eth_data_exporter.
* Quick verify version to test with geth created era1 files
* Add Era1File object and getter for specific block tuple
* Add getAccumulatorRoot and update AccumulatorRoot type name
+ clean-up of some comments.
* Implement BlockIndex based verify + additional helper calls
+ fix bug for reading last (incomplete) Era1 file
* Fix init BlockIndex offsets for last era + extra check on reading
* Remove duplicated e2store code
* Return slots when verifying witness regardless of code length.
* Prevent AccountCache WitnessData codeTouched from being reset.
* Default to using {wfNoFlag} for witness flags in tests to allow running with data from before EIP170.
* Add additional json files to experimental JSON RPC test.
* Use HTTP RPC server in tests.
* Add test to check that block witness contains bytecode.
* Completed draft implementation of witness JSON-RPC endpoints for portal network bridge.
* Updated Nimbus RPC configuration to support enabling experimental endpoints.
* Moved witness verification tests.
* Added json test for getProof.
* Added main procs to new tests to fix test suite.
* Added getBlockWitness test to blockchain json test suite.
* Added tests for experimental RPC endpoints and improved the API to support returning state proofs from before or after block execution.
* Correctly rollback transaction in getBlockWitness proc.
* Remove support for validation of missing leafs.
* Move proof types into separate file and borrow required procs.
* Added state proof types.
* Completed initial implementation of witness verification.
* Reject empty proofs.
* Added tests for verification of block witnesses.
Both types are not safe and require validation/conversion
from rpc implementer.
This PR change it to safer types and delegate the conversion
and validation to the rpc library.
* Initial implementation of account and storage proof verification for the portal state network.
* Completed initial state proof verification loop test.
* Completed proof verification tests.
* Minor updates based on PR feedback and comments.
* Add state proof verification test to test runner.
- The current setting of 0.25 was very big. Set to 0.5, which is
potentially still large. This change did expose some issues with
the current implementation and especially testing.
- General clean-up, renaming for consistency, and
re-ordering/restructuring/deletion of some code.
- Fixed several typos
- ...
This would lead to sending an AcceptMessage with a zeroed out
connection id but still potentially bits set in the bitlist.
Requesting nodes could try to open up an uTP connection that
would never be accepted on the responder side.
- Adjust beacon lc db to avoid requirement of pruning optimistic
and finality updates
- Enable Portal config for beacon chain network to apply IP limits
configs on routing table
- Link network gossip validation to LC processor validation
- QuickFix put/get for optimistic and finality updates
- Minor fixes and clean-up
- Improve bridge gossip for new LC Updates
- Adjust local testnet script to be able to locally test this
- Adjust test and skip broken test
* Add clientInfo to ENR for easier testnet debugging
* Remove git rev from ENR client info
This allows for a shorter ENR which allows more ENRs to be packed
in the Nodes reply. And for glados, only the client name is used
anyhow.
* Correct the shortcut for ommershash verification post Shanghai
There was a faulty length check being done in the assumption that
the uncles field was already the list. However it is still the
RLP encoded data at that point, hence we check directly for the
RLP encoded value for empty list.
* Fix copy-paste error in withdrawal root verification
And print out the hashes in txs root and withdrawal root
verification
* Add discv5 provided ENR directly to Portal protocol routing table
Previous version of getting the ENR from the discv5 routing table
would not work due to the order of first calling the talk protocol
handler and only after that the addEnr to the disc5 routing table.
Instead of changing this order, pass along the ENR directly to
avoid this additional getNode call.
* Still request ENR from discv5 if it wasn't passed via handshake
* Nimbus folder environment update
details:
* Integrated `CoreDbRef` for the sources in the `nimbus` sub-folder.
* The `nimbus` program does not compile yet as it needs the updates
in the parallel `stateless` sub-folder.
* Stateless environment update
details:
* Integrated `CoreDbRef` for the sources in the `stateless` sub-folder.
* The `nimbus` program compiles now.
* Premix environment update
details:
* Integrated `CoreDbRef` for the sources in the `premix` sub-folder.
* Fluffy environment update
details:
* Integrated `CoreDbRef` for the sources in the `fluffy` sub-folder.
* Tools environment update
details:
* Integrated `CoreDbRef` for the sources in the `tools` sub-folder.
* Nodocker environment update
details:
* Integrated `CoreDbRef` for the sources in the
`hive_integration/nodocker` sub-folder.
* Tests environment update
details:
* Integrated `CoreDbRef` for the sources in the `tests` sub-folder.
* The unit tests compile and run cleanly now.
* Generalise `CoreDbRef` to any `select_backend` supported database
why:
Generalisation was just missed due to overcoming some compiler oddity
which was tied to rocksdb for testing.
* Suppress compiler warning for `newChainDB()`
why:
Warning was added to this function which must be wrapped so that
any `CatchableError` is re-raised as `Defect`.
* Split off persistent `CoreDbRef` constructor into separate file
why:
This allows to compile a memory only database version without linking
the backend library.
* Use memory `CoreDbRef` database by default
detail:
Persistent DB constructor needs to import `db/core_db/persistent
why:
Most tests use memory DB anyway. This avoids linking `-lrocksdb` or
any other backend by default.
* fix `toLegacyBackend()` availability check
why:
got garbled after memory/persistent split.
* Clarify raw access to MPT for snap sync handler
why:
Logically, `kvt` is not the raw access for the hexary trie (although
this holds for the legacy database)
* Launch Fluffy builds directly from make to avoid compile issue
Without this change, builds on latest macos fails when ulimit is
not set to 1024. But it will still cause libbacktrace error to occur
when launching the binaries so it would be still advised to
set it to 1024.
* Fix fluffy local testnet for some macOS systems
And some additional improvements to the script + run the fluffy
nodes at INFO log-level to speed-up the testing time.
* Split up fluffy tests in separate targets
This way the two test binaries can be build and ran
concurrently.
* Build Fluffy tools individually through Makefile
Before the builds were launched sequentually from a nimble task,
this would not allow for concurrent builds of the individual tools
* Some Makefile / nimble clean-up
Kim De Mey
web3-developer
Jacek Sieka
Etan Kissling
Jordan Hrycaj
BiKangNing
andri lim
Daniel Sobol
Jakub Sokołowski