Simplify how JSON fixtures tests are run to use `runComputation`.
Drop other code.
These use the `noTransfer` option, which is similar enough to calling
`c.executeOpcodes()` instead of `c.execComputation()`.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
Add another flag to disable a processing step when a call doesn't come from
a real transaction:
- `noTransfer`: Don't update balances, nonces, code.
This is to support VM fixtures tests which require account balances and nonces
to be unchanged when running the account's code.
These tests call `c.executeOpcodes()`, an internal function of the EVM, instead
of the usual `c.execComputation()`. It goes direct to the bytecode dispatcher,
skipping parts of `Computation` that are normally called.
But we can't keep calling `c.executeOpcodes()` and have a single entry point to
the VM, let alone an EVMC entry point.
`noTransfer` provides similar enough behaviour to calling `c.executeOpcodes()`
that these tests can use the new single entry point like everything else.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
Simplify `estimateGas` to use `runComputation`; drop other code.
The RPC/GraphQL `estimateGas` operation is quite different from the `call`
operation. It is much more like ordinary transaction execution than `call`,
though there are still enough differences that tx validation cannot be used.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
Simplify `call` to use `runComputation`; drop other code.
The RPC/GraphQL `call` operation differs in many ways from regular transaction
calls. The following flags are set, to disable various steps in processing.
All four are true (disabling the corresponding step) for `call`:
- `noIntrinsic`: Don't charge intrinsic gas.
- `noAccessList`: Don't initialise EIP2929 access list.
- `noGasCharge`: Don't charge sender account for gas.
- `noRefund`: Don't apply gas refund/burn rule.
Interestingly, the RPC/GraphQL `estimateGas` operation doesn't behave so
differently from regular transactions. It might be that not all these steps
should be disabled for `call` either. But until we investigate what
RPC/GraphQL clients are expecting, keep the same behaviour as before.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
The following four flags are added, to change various steps in EVM processing
when a call doesn't come from a real transaction:
- `noIntrinsic`: Don't charge intrinsic gas.
- `noAccessList`: Don't initialise EIP2929 access list.
- `noGasCharge`: Don't charge sender account for gas.
- `noRefund`: Don't apply gas refund/burn rule.
This is to support RPC and GraphQL `call` operations, which behave differently
in some ways from regular transaction calls, and to support some test suites.
In EVMC terms, all these alterations can be performed on the host side.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
Calculate extra intrinsic gas for an EIP-2930 transaction with access list.
While we're here, do the rest of the intrinsic gas calculation. Make it clear,
explicit and in one place. (Previous code delegated parts of the calculation
to `transaction.nim` but had to do the rest locally due to mismatched types.)
Signed-off-by: Jamie Lokier <jamie@shareable.org>
New entry point `runComputation`, for all EVM calls.
(Later the intent is `runComputationAsync`.)
As noted in commit 297d789, there are six entry points calling EVM computation,
with different parameters and expecting different behaviours. Parameters were
dealt with in `setupComputation`. Behaviours are unified in `runComputation`,
with options passed via `CallParams`.
This code performs the steps used when validating a transaction. Options for
non-standard behaviour for RPC, GraphQL and tests to be added as required.
This replaces `setupComputation`, `execComputation` and `executeOpcodes`
(other than its own calls). As a result `Computation` and other EVM types are
no longer referenced in the main program, and many imports can be dropped.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
Change fixtures tests to use shared `setupComputation` instead of
their own slightly different variant.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
Change RPC/GraphQL calls to the EVM to use shared `setupComputation`
instead of their own special variant.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
There are currently six entry points to running an EVM computation, all with
slightly different parameters, and expecting slightly different EVM behaviours.
First step in merging them is a common `setupComputation` that replaces all
the different `*...SetupComputation` functions.
This uses the `TransactionHost` type because it's a step towards using that
type for all EVM calls using only EVMC. For now an EVMC message is created
then translated to EVM-internal `Message`. It is done this way to build up
the new interface in stages where all tests pass at each stage.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
`TransactionHost` represents the interface to the EVM from the application once
we've fully transitioned to EVMC. It represents a managed EVM call, and the
"EVMC host" side of the host<->EVM boundary.
This holds transaction state which sits outside the EVM, but a pointer to this
is passed around by the EVM as _opaque_ type `evmc_host_context`.
To the EVM, this offers "host services", which manage account state that the
EVM cannot do, such as balance transfers, call costs, storage, logs, gas
refunds, nested calls and new contract addresses. The EVM has no direct access
to the account state database or network; it's all via "host services".
To the application (host side), this object represents a managed EVM call, with
inputs, a method to run, outputs, hidden transaction state, and later async
scheduling. It is to replace `Computation` on the application side, while
`Computation` will remain but just be for the EVM side.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
This fixes a bug spotted by @mjfh that was introduced by commit 2a7ccceb:
try:
if not c.continuation.isNil:
(c.continuation)()
c.continuation = nil
c.selectVM(fork)
except CatchableError as e:
...
The call to `(c.continuation)()` was moved by 2a7ccceb inside the `try` so
that, like all the Op functions do already, if the continuation raises, the
interpreter's general catch turns the exception into a an error status result.
But if the continuation raises an exception, `continuation` is not cleared in
the next line, and at the next resumption the continuation is called again.
It may loop doing this.
This doesn't currently happen because the continuations don't really raise, but
it's still a correctness issue.
This fix also allows a continuation to spawn a second continuation, if it
encounters a second suspension point. This also doesn't happen currently,
but the pattern will become useful with async EVM.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
There is no valid `CREATE_CONTRACT_ADDRESS`. Some places on the internet say
account zero means contract creation, but that's not correct.
Transactions to `ZERO_ADDRESS` are legitimate transfers to that account, not
contract creations. They are used to "burn" Eth. People also send Eth to
address zero by accident, unrecoverably, due to poor user interface issues.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
Each place in `call_evm` that sets up an EVM call calculates the new contract
address for contract creations. But it's redundant, because `newComputation`
ignores the provided value and does the calculation again.
Remove the unused address calculation.
This is also a step to merging different entry points and EVMC. This change
ends up with the same value in both `msg.contractAddress` and `msg.codeAddress`
for every entry point, and this is good because it matches the EVMC message
structure, where they are replaced by only one value called `msg.destination`
Signed-off-by: Jamie Lokier <jamie@shareable.org>
`c.executeOpcodes` is called by some JSON fixture tests. These tests bypass
some of the setup and return, and because of this call, continuations aren't
processed either. Opcodes that use continuations will behave incorrectly.
The opcodes used in these particular tests don't use continuations currently,
so just add some assertions to verify this remains the case.
This is only used by local tests, and the call to `c.executeOpcodes` will be
replaced by the common entry point (that handles things like this correctly in
all cases) so we don't need to spend more time on this.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
why:
previously, table data were stored with the table iterator. while
loading a table with permuted entries will always reconstruct equivalent
tables (in the sense of `==`), serialisation data are not comparable.
this patch produces always the same serialised data for equivalent
tables.
why:
source-local unit tests would hardly be triggered by github CI as rightly
criticised with the last patch.
details:
source-local unit tests have been moved to tests folder.
this version also contains rlp serialisation code so rlp encode/decode
will apply tranparently. this is not needed in p2p/validate but will be
useful with the clique protocol.
why:
to be used in Clique consensus protocol which suggests 4k cache entries.
the previous implementation used OrderTable[] which has complexity O(n)
for deleting entries.
after EIP2718/EIP2930, we have additional fields:
type AccessTuple {
address: Address!
storageKeys : [Bytes32!]
}
type Transaction {
r: BigInt!
s: BigInt!
v: BigInt!
# Envelope transaction support
type: Int
accessList: [AccessTuple!]
}
close#606
instead of using stdlib/json, now we switch to json_serialization
the result is much tidier code and more robust when parsing
optional fields.
fixes#635
Jamie Lokier
jangko
Jordan Hrycaj