This is a minimal set of changes to make things work with the new types
in nim-eth - this is the minimal PR that merely resolves
incompatibilities while the full change set would include more cleanup
and migration.
Compared to `keyed_queue`, `minilru` uses significantly less memory, in
particular for the 32-byte hash keys where `kq` stores several copies of
the key redundantly.
Saving both memory and processing, we can move entries from one
savepoint to another, specially when the target is empty as it often is
during transaction processing
The reverse slot hash mechanism causes quite a bit of database traffic
but is broadly not useful except for iterating the storage of an
account, something that a validator never does (it's used by the
tracers).
This flag adds one more thing that is not stored in the database, to be
explored more comprehensively when designing full, validator and archive
modes with different pruning options in the future.
`ldb` says this is 60gb of data (!):
```
ldb --db=. --ignore_unknown_options --column_family=KvtGen approxsize
--hex --from=0x05
--to=0x05ffffffffffffffffffffffffffffffffffffffffffffff
66488353954
```
* Update config for Ledger and CoreDb
why:
Prepare for tracer which depends on the API jump table (as well as
the profiler.) The API jump table is now enabled in unit/integration
test mode piggybacking on the `unittest2DisableParamFiltering`
compiler flag or on an extra compiler flag `dbjapi_enabled`.
* No deed for error field in `NodeRef`
why:
Was opnly needed by proof nodes pre-loader which will be re-implemented
* Cosmetics
* Extract `CoreDb` constructor helpers from `base.nim` into separate module
why:
This makes it easier to avoid circular imports.
* Extract `Ledger` constructor helpers from `base.nim` into separate module
why:
Move `accounts_ledger.nim` file to sub-folder `backend`. That way the
layout resembles that of the `core_db`.
* Updates and corrections
* Extract `CoreDb` configuration from `base.nim` into separate module
why:
This makes it easier to avoid circular imports, in particular
when the capture journal (aka tracer) is revived.
* Extract `Ledger` configuration from `base.nim` into separate module
why:
This makes it easier to avoid circular imports (if any.)
also:
Move `accounts_ledger.nim` file to sub-folder `backend`. That way the
layout resembles that of the `core_db`.
hike allocations (and the garbage collection maintenance that follows)
are responsible for some 10% of cpu time (not wall time!) at this point
- this PR avoids them by stepping through the layers one step at a time,
simplifying the code at the same time.
* Rename `newKvt()` -> `ctx.getKvt()`
why:
Clean up legacy shortcut. Also, the `KVT` returned is not instantiated
but refers to the shared `KVT` that resides in a context which is a
generalisation of an in-memory database fork. The function `ctx`
retrieves the default context.
* Rename `newTransaction()` -> `ctx.newTransaction()`
why:
Clean up legacy shortcut. The transaction is applied to a context as a
generalisation of an in-memory database fork. The function `ctx`
retrieves the default context.
* Rename `getColumn(CtGeneric)` -> `getGeneric()`
why:
No more a list of well known sub-tries needed, a single one is enough.
In fact, `getColumn()` did only support a single sub-tree by now.
* Reduce TODO list
Avoid writing the same slot/hash values to the hash->slot mapping
to avoid spamming the rocksdb WAL and cause unnecessary compaction
In the same vein, avoid writing trivially detectable A-B-A storage
changes which happen with surprising frequency.
Introduce a new `StoData` payload type similar to `AccountData`
* slightly more efficient storage format
* typed api
* fewer seqs
* fix encoding docs - it wasn't rlp after all :)
The state and account MPT:s currenty share key space in the database
based on that vertex id:s are assigned essentially randomly, which means
that when two adjacent slot values from the same contract are accessed,
they might reside at large distance from each other.
Here, we prefix each vertex id by its root causing them to be sorted
together thus bringing all data belonging to a particular contract
closer together - the same effect also happens for the main state MPT
whose nodes now end up clustered together more tightly.
In the future, the prefix given to the storage keys can also be used to
perform range operations such as reading all the storage at once and/or
deleting an account with a batch operation.
Notably, parts of the API already supported this rooting concept while
parts didn't - this PR makes the API consistent by always working with a
root+vid.
* CoreDb: Merged all sub-descriptors into `base_desc` module
* Dissolve `aristo_db/common_desc.nim`
* No need to export `Aristo` methods in `CoreDb`
* Resolve/tighten methods in `aristo_db` sub-moduled
why:
So they can be straihgt implemented into the `base` module
* Moved/re-implemented `KVT` methods into `base` module
* Moved/re-implemented `MPT` methods into `base` module
* Moved/re-implemented account methods into `base` module
* Moved/re-implemented `CTX` methods into `base` module
* Moved/re-implemented `handler_{aristo,kvt}` into `aristo_db` module
* Moved/re-implemented `TX` methods into `base` module
* Moved/re-implemented base methods into `base` module
* Replaced `toAristoSavedStateBlockNumber()` by proper base method
why:
Was the last for keeping reason for keeping low level backend access
methods
* Remove dedicated low level access to `Aristo` backend
why:
Not needed anymore, for debugging the descriptors can be accessed
directly
also:
some clean up stuff
* Re-factor `CoreDb` descriptor layout and adjust base methods
* Moved/re-implemented iterators into `base_iterator*` modules
* Update docu
* avoid costly hike memory allocations for operations that don't need to
re-traverse it
* avoid unnecessary state checks (which might trigger unwanted state
root computations)
* disable optimize-for-hits due to the MPT no longer being complete at
all times
* rebased from `github/on-demand-mpt`
ackn:
wip: on-demand mpt construction
Given that actual data is stored in the `Vertex` structure, it's useful
to think of the MPT as a cache for computing roots rather than being a
functional requirement on its own.
This PR engenders this line of thinking by incrementally computing the
MPT only when it's needed, ie when a state (or similar) root is needed.
This has the effect of siginficantly reducing memory usage as well as
improving performance:
* no need for dirty-mpt-node book-keeping
* no need to build complex forest of upcoming hashing work
* only hashes that are functionally needed are ever computed -
intermediate nodes whose MTP root is not observed are never computed /
processed
* Unit test hot fixes
* Unit test hot fixes cont.
(somehow lost that part)
---------
Co-authored-by: Jacek Sieka <jacek@status.im>
* Normalised storage tree addressing in function prototypes
detail:
Argument list is always `<db> <account-path> <slot-path> ..` with
both path arguments as `openArray[]`
* Remove cruft
* CoreDb internally Use full account paths rather than addresses
* Update API logging
* Use hashed account address only in prototypes
why:
This avoids unnecessary repeated hashing of the same account address.
The burden of doing that is upon the application. In the case here,
the ledger caches all kinds of stuff anyway so it is common sense to
exploit that for account address hashes.
caveat:
Using `openArray[byte]` argument types for hashed accounts is inherently
fragile. In non-release mode, a length verification `doAssert` is
enabled by default.
* No accPath in data record (use `AristoAccount` as `CoreDbAccount`)
* Remove now unused `eAddr` field from ledger `AccountRef` type
why:
Is duplicate of lookup key
* Avoid merging the account record/statement in the ledger twice.
* Tighten `CoreDb` API for accounts
why:
Apart from cruft, the way to fetch the accounts state root via a
`CoreDbColRef` record was unnecessarily complicated.
* Extend `CoreDb` API for accounts to cover storage tries
why:
In future, this will make the notion of column objects obsolete. Storage
trees will then be indexed by the account address rather than the vertex
ID equivalent like a `CoreDbColRef`.
* Apply new/extended accounts API to ledger and tests
details:
This makes the `distinct_ledger` module obsolete
* Remove column object constructors
why:
They were needed as an abstraction of MPT sub-trees including storage
trees. Now, storage trees are handled by the account (e.g. via address)
they belong to and all other trees can be identified by a constant well
known vertex ID. So there is no need for column objects anymore.
Still there are some left-over column object methods wnich will be
removed next.
* Remove `serialise()` and `PayloadRef` from default Aristo API
why:
Not needed. `PayloadRef` was used for unstructured/unknown payload
formats (account or blob) and `serialise()` was used for decodng
`PayloadRef`. Now it is known in advance what the payload looks
like.
* Added query function `hasStorageData()` whether a storage area exists
why:
Useful for supporting `slotStateEmpty()` of the `CoreDb` API
* In the `Ledger` replace `storage.stateEmpty()` by `slotStateEmpty()`
* On Aristo, hide the storage root/vertex ID in the `PayloadRef`
why:
The storage vertex ID is fully controlled by Aristo while the
`AristoAccount` object is controlled by the application. With the
storage root part of the `AristoAccount` object, there was a useless
administrative burden to keep that storage root field up to date.
* Remove cruft, update comments etc.
* Update changed MPT access paradigms
why:
Fixes verified proxy tests
* Fluffy cosmetics
When processing long ranges of blocks, the account cache grows unbounded
which cause huge memory spikes.
Here, we move the cache to a second-level cache after each block - the
second-level cache is cleared on the next block after that which creates
a simple LRU effect.
There's a small performance cost of course, though overall the freed-up
memory can now be reassigned to the rocksdb row cache which not only
makes up for the loss but overall leads to a performance increase.
The bump to 2gb of rocksdb row cache here needs more testing but is
slightly less and loosely basedy on the savings from this PR and the
circular ref fix in #2408 - another way to phrase this is that it's
better to give rocksdb more breathing room than let the memory sit
unused until circular ref collection happens ;)
It is common for many accounts to share the same code - at the database
level, code is stored by hash meaning only one copy exists per unique
program but when loaded in memory, a copy is made for each account.
Further, every time we execute the code, it must be scanned for invalid
jump destinations which slows down EVM exeuction.
Finally, the extcodesize call causes code to be loaded even if only the
size is needed.
This PR improves on all these points by introducing a shared
CodeBytesRef type whose code section is immutable and that can be shared
between accounts. Further, a dedicated `len` API call is added so that
the EXTCODESIZE opcode can operate without polluting the GC and code
cache, for cases where only the size is requested - rocksdb will in this
case cache the code itself in the row cache meaning that lookup of the
code itself remains fast when length is asked for first.
With 16k code entries, there's a 90% hit rate which goes up to 99%
during the 2.3M attack - the cache significantly lowers memory
consumption and execution time not only during this event but across the
board.
* CoreDb: remove PHK tries
why:
There is no general use anymore for an MPT with a pre-hashed key. It
was used to resemble the `SecureHexaryTrie` logic from the legacy DB.
The only pace where this is needed is the `Leger` which uses a
a distinct MPT version anyway (see `distinct_ledgers.nim`.)
* Rename `CoreDx*` -> `CoreDb*`
why:
The naming `CoreDx*` was used to differentiate the new CoreDb API from
the legacy API which had descriptors named `CoreDb*`.
* Provide dedicated functions for deleteing accounts and storage trees
why:
Storage trees are always linked to an account, so there is no need
for an application to fiddle about (e.g. re-cycling, unlinking)
storage tree vertex IDs.
* Remove `delete()` and other cruft from API, `aristo_delete`, etc.
* clean up delete functions
details:
The delete implementations `deleteImpl()` and `delTreeImpl()` do not
need to be super generic anymore as all the edge cases are covered by
the specialised `deleteAccountPayload()`, `deleteGenericData()`, etc.
* Avoid unnecessary re-calculations of account keys
why:
The function `registerAccountForUpdate()` did extract the storage ID
(if any) and automatically marked the Merkle keys along the account
path for re-hashing.
This would also apply if there was later detected that the account
or the storage tree did not need to be updated.
So the `registerAccountForUpdate()` function was split into a part
which retrieved the storage ID, and another one which marked the
Merkle keys for re-calculation to be applied only when needed.
The state root computation here is one of the major hotspots in block
processing - in the cases the code only needs to know if it's empty or
not, it can be done a lot faster.
Adding a separate function for this looks fragile and should probably be
revisited.
* Remove AccountStateDB
AccountStateDB should no longer be used.
It's usage have been reduce to read only operations.
Replace it with LedgerRef to reduce maintenance burden.
* remove extra spaces
Co-authored-by: tersec <tersec@users.noreply.github.com>
---------
Co-authored-by: tersec <tersec@users.noreply.github.com>
* Fix initialiser
why:
Possible crash (app profiling, tracer etc.)
* Update column family options processing
why:
Same for kvt as for aristo
* Move `AristoDbDualRocks` backend type to the test suite
why:
So it is not available for production
* Fix typos in API jump table
why:
Used for tracing and app profiling only. Needed some update
* Purged CoreDb legacy API
why:
Not needed anymore, was transitionary and disabled.
* Rename `flush` argument to `eradicate` in a DB close context
why:
The word `eradicate` leaves no doubt what is meant
* Rename `stoFlush()` -> `stoDelete()`
* Rename `core_apps_newapi` -> `core_apps` (not so new anymore)
`initTable` is obsolete since nim 0.19 and can introduce significant
memory overhead while providing no benefit (since the table will be
grown to the default initial size on first use anyway).
In particular, aristo layers will not necessarily use all tables they
initialize, for exampe when many empty accounts are being created.
* Cleanup unneeded stateless and block witness code. Keeping MultiKeys which is used in the eth_getProofsByBlockNumber RPC endpoint which is needed for the Fluffy state network bridge.
* Rename generateWitness flag to collectWitnessData to better describe what the flag does. We only collect the keys of the touched accounts and storage slots but no block witness generation is supported for now.
* Move remaining stateless code into nimbus directory.
* Add vmstate parameter to ChainRef to fix test.
* Exclude *.in from check copyright year
---------
Co-authored-by: jangko <jangko128@gmail.com>
* Code cosmetics
* Re-org `aristo_merge`, internally split into sub-modules
why:
Became a burden for maintenance because it hosts two different
functionalities under the same merge paradigm: account/data merge
and snap proof merge where the latter produces a partial trie.
* Fix CoreDb tracer
* Ledger: fix potential account vs. storage tree sync problems
* Remove bound on the size of removable whole storage trees
* Activate `test_tracer_json`
* CoreDb: Remove crufty second/off-site KVT
why:
Was used to allow late `Clique` to store directly to disk
* CoreDb: Remove prune flag related functionality
why:
Is completely legacy stuff
* CoreDb: Remove dependence on legacy API (tests unsupported yet)
why:
Does not fully support Aristo
* Re-factoring `state_db` using new API
details:
Only minimum changes needed to compile `nimbus`
* Update tests and aux modules
* Turn off legacy API and remove `distinct_tries`
comment:
The legacy API has now cruft status, will be removed soon
* Fix copyright years
* Update rpc for verified proxy
---------
Co-authored-by: Jacek Sieka <jacek@status.im>
`persist` is a hotspot when processing blocks because it is run at least
once per transaction and loops over the entire account cache every time.
Here, we introduce an extra `dirty` map that keeps track of all accounts
that need checking during `persist` which fixes the immediate
inefficiency, though probably this could benefit from a more thorough
review - we also get rid of the unused clearCache flag - we start with
a fresh cache on every fresh vmState.
* avoid unnecessary code hash comparisons
* avoid unnecessary copies when iterating
* use EMPTY_CODE_HASH throughout for code hash comparison
* Update TDD suite logger output format choices
why:
New format is not practical for TDD as it just dumps data across a wide
range (considerably larder than 80 columns.)
So the new format can be turned on by function argument.
* Update unit tests samples configuration
why:
Slightly changed the way to find the `era1` directory
* Remove compiler warnings (fix deprecated expressions and phrases)
* Update `Aristo` debugging tools
* Always update the `storageID` field of account leaf vertices
why:
Storage tries are weekly linked to an account leaf object in that
the `storageID` field is updated by the application.
Previously, `Aristo` verified that leaf objects make sense when passed
to the database. As a consequence
* the database was inconsistent for a short while
* the burden for correctness was all on the application which led
to delayed error handling which is hard to debug.
So `Aristo` will internally update the account leaf objects so that
there are no race conditions due to the storage trie handling
* Aristo: Let `stow()`/`persist()` bail out unless there is a `VertexID(1)`
why:
The journal and filter logic depends on the hash of the `VertexID(1)`
which is commonly known as the state root. This implies that all
changes to the database are somehow related to that.
* Make sure that a `Ledger` account does not overwrite the storage trie reference
why:
Due to the abstraction of a sub-trie (now referred to as column with a
hash describing its state) there was a weakness in the `Aristo` handler
where an account leaf could be overwritten though changing the validity
of the database. This has been changed and the database will now reject
such changes.
This patch fixes the behaviour on the application layer. In particular,
the column handle returned by the `CoreDb` needs to be updated by
the `Aristo` database state. This mitigates the problem that a storage
trie might have vanished or re-apperaed with a different vertex ID.
* Fix sub-trie deletion test
why:
Was originally hinged on `VertexID(1)` which cannot be wholesale
deleted anymore after the last Aristo update. Also, running with
`VertexID(2)` needs an artificial `VertexID(1)` for making `stow()`
or `persist()` work.
* Cosmetics
* Activate `test_generalstate_json`
* Temporarily `deactivate test_tracer_json`
* Fix copyright header
---------
Co-authored-by: jordan <jordan@dry.pudding>
Co-authored-by: Jacek Sieka <jacek@status.im>
* Remove crufty `pruneTrie` arguments
* Replaced legacy `distinct_trie` logic by new `ledger` functionality
why:
The module `distinct_trie` is supported by `Aristo` in trivial cases.
* Activate `test_op_memory`
* Attempt to roll back stateless mode implementation in a single PR
why:
+ Stateless mode is not fully working and in the way
+ Single PR should make it feasible to investigate for a possible
re-implementation
* Fix copyright year
* Fix annotation for exception (evmc mode)
* Update some docu & messages
* Remove cruft from the ledger modules
* Must not overwrite genesis data on an initialised database
why:
This will overwrite the global state of the Aristo single state DB.
Otherwise resuming at the last synced state becomes impossible.
* Provide latest block number from journal
why:
This relates the global state of the DB directly to the corresponding
block number.
* Implemented unit test providing DB pre-load and resume
Jacek Sieka
web3-developer
Jordan Hrycaj
andri lim