* Clear rejected sync target so that it would not be processed again
* Use in-memory table to stash headers after FCU import has started
why:
After block imported has started, there is no way to save/stash block
headers persistently. The FCU handlers always maintain a positive
transaction level and in some instances the current transaction is
flushed and re-opened.
This patch fixes an exception thrown when a block header has gone
missing.
* When resuming sync, delete stale headers and state
why:
Deleting headers saves some persistent space that would get lost
otherwise. Deleting the state after resuming prevents from race
conditions.
* On clean start hibernate sync `deamon` entity before first update from CL
details:
Only reduces services are running
* accept FCU from CL
* fetch finalised header after accepting FCY (provides hash only)
* Improve text/meaning of some log messages
* Revisit error handling for useless peers
why:
A peer is abandoned from if the error score is too high. This was not
properly handled for some fringe case when the error was detected at
staging time but fetching via eth/xx was ok.
* Clarify `break` meaning by using labelled `break` statements
* Fix action how to commit when sync target has been reached
why:
The sync target block number might precede than latest FCU block number.
This happens when the engine API squeezes in some request to execute
and import subsequent blocks.
This patch fixes and assert thrown when after reaching target the latest
FCU block number is higher than the expected target block number.
* Update TODO list
* Clarifying/commenting FCU setup condition & small fixes, comments etc.
* Update some logging
* Reorg metrics updater and activation
* Better `async` responsiveness
why:
Block import does not allow `async` task activation while
executing. So allow potential switch after each imported
block (rather than a group of 32 blocks.)
* Handle resuming after previous sync followed by import
why:
In this case the ledger state is more recent than the saved
sync state. So this is considered a pristine sync where any
previous sync state is forgotten.
This fixes some assert thrown because of inconsistent internal
state at some point.
* Provide option for clearing saved beacon sync state before starting syncer
why:
It would resume with the last state otherwise which might be undesired
sometimes.
Without RPC available, the syncer typically stops and terminates with
the canonical head larger than the base/finalised head. The latter one
will be saved as database/ledger state and the canonical head as syncer
target. Resuming syncing here will repeat itself.
So clearing the syncer state can prevent from starting the syncer
unnecessarily avoiding useless actions.
* Allow workers to request syncer shutdown from within
why:
In one-trick-pony mode (after resuming without RPC support) the
syncer can be stopped from within soavoiding unnecessary polling.
In that case, the syncer can (theoretically) be restarted externally
with `startSync()`.
* Terminate beacon sync after a single run target is reached
why:
Stops doing useless polling (typically when there is no RPC available)
* Remove crufty comments
* Tighten state reload condition when resuming
why:
Some pathological case might apply if the syncer is stopped while the
distance between finalised block and head is very large and the FCU
base becomes larger than the locked finalised state.
* Verify that finalised number from CL is at least FCU base number
why:
The FCU base number is determined by the database, non zero if
manually imported. The finalised number is passed via RPC by the CL
node and will increase over time. Unless fully synced, this number
will be pretty low.
On the other hand, the FCU call `forkChoice()` will eventually fail
if the `finalizedHash` argument refers to something outside the
internal chain starting at the FCU base block.
* Remove support for completing interrupted sync without RPC support
why:
Simplifies start/stop logic
* Rmove unused import
* Dissolve legacy `sync/types.nim` into `*/eth/eth_types.nim`
* Flare sync: Simplify scheduler and remove `runSingle()` method
why:
`runSingle()` is not used anymore (main purpose was for negotiating
best headers in legacy full sync.)
Also, `runMulti()` was renamed `runPeer()`
* Flare sync: Move `chain` field from `sync_desc` -> `worker_desc`
* Flare sync: Remove handler descriptor lateral reference
why:
Not used anymore. It enabled to turn on/off eth handler activity with
regards to the sync state, i.e.from with in the sync worker.
* Flare sync: Update `Hash256` and other deprecated `std/eth` symbols
* Protocols: Update `Hash256` and other deprecated `std/eth` symbols
* Eth handler: Update `Hash256` and other deprecated `std/eth` symbols
* Update flare TODO
* Remove redundant `sync/type` import
why:
The import module `type` has been removed
* Remove duplicate implementation
* Wiring ForkedChainRef to other components
- Disable majority of hive simulators
- Only enable pyspec_sim for the moment
- The pyspec_sim is using a smaller RPC service wired to ForkedChainRef
- The RPC service will gradually grow
* Addressing PR review
* Fix test_beacon/setup_env
* Enable consensus_sim (#2441)
* Enable consensus_sim
* Remove isFile check
* Enable Engine API jwt auth tests and exchange cap tests
* Enable engine api in build_sim.sh
* Wire ForkedChainRef to Engine API newPayload
* Wire Engine API getBodies to ForkedChainRef
* Wire Engine API api_forkchoice to ForkedChainRef
* Wire more RPC methods to ForkedChainRef
* Implement eth_syncing
* Implement eth_call and eth_getlogs
* TxPool: simplify smartHead
* Fix smartHead usage
* Fix txpool headDiff
* Remove hasBlockHeader and use headerExists
* Addressing review
* bump metrics
* Remove cruft
* Cosmetics, update some logging, noise control
* Renamed `CoreDb` function `hasKey` => `hasKeyRc` and provided `hasKey`
why:
Currently, `hasKey` returns a `Result[]` rather than a `bool` which
is what one would expect from a function prototype of this name.
This was a bit of an annoyance and cost unnecessary attention.
* Nimbus folder environment update
details:
* Integrated `CoreDbRef` for the sources in the `nimbus` sub-folder.
* The `nimbus` program does not compile yet as it needs the updates
in the parallel `stateless` sub-folder.
* Stateless environment update
details:
* Integrated `CoreDbRef` for the sources in the `stateless` sub-folder.
* The `nimbus` program compiles now.
* Premix environment update
details:
* Integrated `CoreDbRef` for the sources in the `premix` sub-folder.
* Fluffy environment update
details:
* Integrated `CoreDbRef` for the sources in the `fluffy` sub-folder.
* Tools environment update
details:
* Integrated `CoreDbRef` for the sources in the `tools` sub-folder.
* Nodocker environment update
details:
* Integrated `CoreDbRef` for the sources in the
`hive_integration/nodocker` sub-folder.
* Tests environment update
details:
* Integrated `CoreDbRef` for the sources in the `tests` sub-folder.
* The unit tests compile and run cleanly now.
* Generalise `CoreDbRef` to any `select_backend` supported database
why:
Generalisation was just missed due to overcoming some compiler oddity
which was tied to rocksdb for testing.
* Suppress compiler warning for `newChainDB()`
why:
Warning was added to this function which must be wrapped so that
any `CatchableError` is re-raised as `Defect`.
* Split off persistent `CoreDbRef` constructor into separate file
why:
This allows to compile a memory only database version without linking
the backend library.
* Use memory `CoreDbRef` database by default
detail:
Persistent DB constructor needs to import `db/core_db/persistent
why:
Most tests use memory DB anyway. This avoids linking `-lrocksdb` or
any other backend by default.
* fix `toLegacyBackend()` availability check
why:
got garbled after memory/persistent split.
* Clarify raw access to MPT for snap sync handler
why:
Logically, `kvt` is not the raw access for the hexary trie (although
this holds for the legacy database)
* Update sync scheduler pool mode
why:
The pool mode allows to loop over active peers one after another. This
is ideal for soft re-starting peers. As this is a two tier experience
(start/stop, setup/release) the loop must be run twice. This is
controlled by a more rigid re-definition of how to use the `poolMode`
flag.
* Mitigate RLP serialiser deficiency
why:
Currently, serialising the `BlockBody` in not conevrtible and need
to be checked in the `eth` module. Currently a local fix for the
wire protocol applies. Unit tests will stay (after this local solution
will have been removed.)
* Code cosmetics and massage
details:
Main part is `types.toStr()` as a unified function for logging block
numbers.
* Allow to use a logical genesis replacement (start of history)
why:
Snap sync will set up an arbitrary pivot at a block number different
from zero. In fact, the higher the block number the better.
details:
A non-genesis start of history will currently only affect the score
values which were derived from the difficulty.
* Provide function to store the snap pivot block header in chain db
why:
Together with the start of history facility, this allows to proceed
with full syncing once snap has finished.
details:
Snap db storage was switched from a sub-tables to the flat chain db.
* Provide database completeness and sanity checker
details:
For debugging on smaller databases, only
* Implement snap -> full sync switch
* Fix fringe condition for `GetStorageRanges` message handler
why:
Receiving a proved empty range was not considered at all. This lead to
inconsistencies of the return value which led to subsequent errors.
* Update storage range bulk download
details;
Mainly re-org of storage queue processing in `storage_queue_helper.nim`
* Update logging variables/messages
* Update storage slots healing
details:
Mainly clean up after improved helper functions from the sources
`find_missing_nodes.nim` and `storage_queue_helper.nim`.
* Simplify account fetch
why:
To much fuss made tolerating some errors. There will be an overall
strategy implemented where the concert of download and healing function
is orchestrated.
* Add error resilience to the concert of download and healing.
why:
The idea is that a peer might stop serving snap/1 accounts and storage
slot downloads while still able to support fetching nodes for healing.
* Enable `snap/1` accounts range service
* Allow to change the garbage collector to `boehm` as a Makefile option.
why:
There is still an unsolved memory corruption problem that might be
related to the standard `gc`. It seemingly goes away if the `gc` is
changed to `boehm`.
Specifying another `gc` on the make level simplifies debugging and
development.
* Code cosmetics
details:
* updated exception annotations
* extracted `worker_desc.nim` from `full/worker.nim`
* etc.
* Implement option to state a sync modifier file
why:
This allows to specify extra sync type specific options which might
change over time. This file is regularly checked for updates.
* Implement a threshold when to suspend full syncing
why:
For a test scenario, a full sync beep may work as a local snap server.
There is no need to download the full block chain.
details:
The file containing the pivot specs is specified by the
`--sync-ctrl-file` option. It is regularly parsed for updates.
* Fix locked database file annoyance with unit tests on Windows
why:
Need to clean up old files first from previous session as files remain
locked despite closing of database.
* Fix initialisation order
detail:
Apparently this has no real effect as the ticker is only initialised
here but started later.
This possible bug has been in all for a while and was running with the
previous compiler and libraries.
* Better naming of data fields for sync descriptors
details:
* BuddyRef[S,W]: buddy.data -> buddy.only
* CtxRef[S]: ctx.data -> ctx.pool
* Silence some compiler gossip -- part 1, tx_pool
details:
Mostly removing redundant imports and `Defect` tracer after switch
to nim 1.6
* Silence some compiler gossip -- part 2, clique
details:
Mostly removing redundant imports and `Defect` tracer after switch
to nim 1.6
* Silence some compiler gossip -- part 3, misc core
details:
Mostly removing redundant imports and `Defect` tracer after switch
to nim 1.6
* Silence some compiler gossip -- part 4, sync
details:
Mostly removing redundant imports and `Defect` tracer after switch
to nim 1.6
* Clique update
why:
Missing exception annotation
* Add `stop()` methods to shutdown to shutdown procedure
why:
Nasty behaviour when hitting Ctrl-C, otherwise
* Add background service to sync scheduler
why:
The background service will be used for sync data import and recovery
after restart.
It is controlled by the sync scheduler for an easy turn/on off API.
also:
Simplified snap ticker time calc.
* Fix typo
* Update log ticker, using time interval rather than ticker count
why:
Counting and logging ticker occurrences is inherently imprecise. So
time intervals are used.
* Use separate storage tables for snap sync data
* Left boundary proof update
why:
Was not properly implemented, yet.
* Capture pivot in peer worker (aka buddy) tasks
why:
The pivot environment is linked to the `buddy` descriptor. While
there is a task switch, the pivot may change. So it is passed on as
function argument `env` rather than retrieved from the buddy at
the start of a sub-function.
* Split queues `fetchStorage` into `fetchStorageFull` and `fetchStoragePart`
* Remove obsolete account range returned from `GetAccountRange` message
why:
Handler returned the wrong right value of the range. This range was
for convenience, only.
* Prioritise storage slots if the queue becomes large
why:
Currently, accounts processing is prioritised up until all accounts
are downloaded. The new prioritisation has two thresholds for
+ start processing storage slots with a new worker
+ stop account processing and switch to storage processing
also:
Provide api for `SnapTodoRanges` pair of range sets in `worker_desc.nim`
* Generalise left boundary proof for accounts or storage slots.
why:
Detailed explanation how this works is documented with
`snapdb_accounts.importAccounts()`.
Instead of enforcing a left boundary proof (which is still the default),
the importer functions return a list of `holes` (aka node paths) found in
the argument ranges of leaf nodes. This in turn is used by the book
keeping software for data download.
* Forgot to pass on variable in function wrapper
also:
+ Start healing not before 99% accounts covered (previously 95%)
+ Logging updated/prettified
* For snap sync, publish `EthWireRef` in sync descriptor
why:
currently used for noise control
* Detect and reuse existing storage slots
* Provide healing module for storage slots
* Update statistic ticker (adding range factor for unprocessed storage)
* Complete mere function for work item ranges
why:
Merging interval into existing partial item was missing
* Show av storage queue lengths in ticker
detail;
Previous attempt shows average completeness which did not tell much
* Correct the meaning of the storage counter (per pivot)
detail:
Is the # accounts that have a storage saved
* Miscellaneous updates TBC
* Disentangled pivot2 module from snap
why:
Wrote as template on top of sync so it can be shared by fast and snap
sync.
* Renamed and relocated pivot sources
* Integrated `best_pivot` module into full and snap sync
why:
Full sync used an older version of `best_pivot`
* isolating download module from full sync
why;
might be shared with snap sync at a later stage
* Provided common scheduler API, applied to `full` sync
* Use hexary trie as storage for proofs_db records
also:
+ Store metadata with account for keeping track of account state
+ add iterator over accounts
* Common scheduler API applied to `snap` sync
* Prepare for accounts bulk import
details:
+ Added some ad-hoc checks for proving accounts data received from the
snap/1 (will be replaced by proper database version when ready)
+ Added code that dumps some of the received snap/1 data into a file
(turned of by default, see `worker_desc.nim`)
Jordan Hrycaj
andri lim
tersec