* Register paths for added leafs because of trie re-balancing
why:
While the payload would not change, the prefix in the leaf vertex
would. So it needs to be flagged for hash recompilation for the
`hashify()` module.
also:
Make sure that `Hike` paths which might have vertex links into the
backend filter are replaced by vertex copies before manipulating.
Otherwise the vertices on the immutable filter might be involuntarily
changed.
* Also check for paths where the leaf vertex is on the backend, already
why:
A a path can have dome vertices on the top layer cache with the
`Leaf` vertex on the backend.
* Re-define a void `HashLabel` type.
why:
A `HashLabel` type is a pair `(root-vertex-ID, Keccak-hash)`. Previously,
a valid `HashLabel` consisted of a non-empty hash and a non-zero vertex
ID. This definition leads to a non-unique representation of a void
`HashLabel` with either root-ID or has void. This has been changed to
the unique void `HashLabel` exactly if the hash entry is void.
* Update consistency checkers
* Re-org `hashify()` procedure
why:
Syncing against block chain showed serious deficiencies which produced
wrong hashes or simply bailed out with error.
So all fringe cases (mainly due to deleted entries) could be integrated
into the labelling schedule rather than handling separate fringe cases.
* Fix copyright year
* Show elapsed times with enabled `CoreDb` API tracking
* Show elapsed times with enabled `LedgerRef` API tracking
* Reorg `CoreDb` auto destructors for `Aristo` DB
why:
While `Aristo` supports some parallelism for concurrent database access,
this comes with a price of management overhead. With a naive approach,
the auto-destructor will slow down execution because the ledger and
evm treat the database in a shared mode where a DB descriptor is just
created and thrown away shortly after.
This is reflected in the `Coredb` abstraction layer above `Aristo`/`Kvt`
where a few `Shared` type descriptors are cached and a shared reference
is returned rather than a disposable new object.
* For `CoreDb` support transaction level tracking
details:
This is mainly an extra for the legacy DB as `Aristo` and `Kvt` support
this already.
Also return an error on the legacy DB backend when `persistent()` is
called while there are transactions pending (the `persistent()` call
does nothing otherwise on the legacy backend.)
* Clear compiler warnings (remove unused variables etc.)
* Using different `tmp` directories for `Kvt` and `Aristo`
why:
Closing one database would leave the other set of directories
incomplete.
* Code cosmetics, silence compiler
* Fix typo `EMPTY_ROOT_HASH` vs. `EMPTY_CODE_HASH`
* Fix copyright years
* Split off `ReadOnlyStateDB` from `AccountStateDB` from `state_db.nim`
why:
Apart from testing, applications use `ReadOnlyStateDB` as an easy
way to access the accounts ledger. This is well supported by the
`Aristo` db, but writable mode is only parially supported.
The writable AccountStateDB` object for modifying accounts is not
used by production code.
So, for lecgacy and testing apps, the full support of the previous
`AccountStateDB` is now enabled by `import db/state_db/read_write`
and the `import db/state_db` provides read-only mode.
* Encapsulate `AccountStateDB` as `GenesisLedgerRef` or genesis creation
why:
`AccountStateDB` has poor support for `Aristo` and is not widely used
in favour of `AccountsLedger` (which will be abstracted as `ledger`.)
Currently, using other than the `AccountStateDB` ledgers within the
`GenesisLedgerRef` wrapper is experimental and test only. Eventually,
the wrapper should disappear so that the `Ledger` object (which
encapsulates `AccountsCache` and `AccountsLedger`) will prevail.
* For the `Ledger`, provide access to raw accounts `MPT`
why:
This gives to the `CoreDbMptRef` descriptor from the `CoreDb` (which is
the legacy version of CoreDxMptRef`.) For the new `ledger` API, the
accounts are based on the `CoreDxMAccRef` descriptor which uses a
particular sub-system for accounts while legacy applications use the
`CoreDbPhkRef` equivalent of the `SecureHexaryTrie`.
The only place where this feature will currently be used is the
`genesis.nim` source file.
* Fix `Aristo` bugs, missing boundary checks, typos, etc.
* Verify root vertex in `MPT` and account constructors
why:
Was missing so far, in particular the accounts constructor must
verify `VertexID(1)
* Fix include file
* Disable `TransactionID` related functions from `state_db.nim`
why:
Functions `getCommittedStorage()` and `updateOriginalRoot()` from
the `state_db` module are nowhere used. The emulation of a legacy
`TransactionID` type functionality is administratively expensive to
provide by `Aristo` (the legacy DB version is only partially
implemented, anyway).
As there is no other place where `TransactionID`s are used, they will
not be provided by the `Aristo` variant of the `CoreDb`. For the
legacy DB API, nothing will change.
* Fix copyright headers in source code
* Get rid of compiler warning
* Update Aristo code, remove unused `merge()` variant, export `hashify()`
why:
Adapt to upcoming `CoreDb` wrapper
* Remove synced tx feature from `Aristo`
why:
+ This feature allowed to synchronise transaction methods like begin,
commit, and rollback for a group of descriptors.
+ The feature is over engineered and not needed for `CoreDb`, neither
is it complete (some convergence features missing.)
* Add debugging helpers to `Kvt`
also:
Update database iterator, add count variable yield argument similar
to `Aristo`.
* Provide optional destructors for `CoreDb` API
why;
For the upcoming Aristo wrapper, this allows to control when certain
smart destruction and update can take place. The auto destructor works
fine in general when the storage/cache strategy is known and acceptable
when creating descriptors.
* Add update option for `CoreDb` API function `hash()`
why;
The hash function is typically used to get the state root of the MPT.
Due to lazy hashing, this might be not available on the `Aristo` DB.
So the `update` function asks for re-hashing the gurrent state changes
if needed.
* Update API tracking log mode: `info` => `debug
* Use shared `Kvt` descriptor in new Ledger API
why:
No need to create a new descriptor all the time
* Fix debug noise in `hashify()` for perfectly normal situation
why:
Was previously considered a fixable error
* Fix test sample file names
why:
The larger test file `goerli68161.txt.gz` is already in the local
archive. So there is no need to use the smaller one from the external
repo.
* Activate `accounts_cache` module from `db/ledger`
why:
A copy of the original `accounts_cache.nim` source to be integrated
into the `Ledger` module wrapper which allows to switch between
different `accounts_cache` implementations unser tha same API.
details:
At a later state, the `db/accounts_cache.nim` wrapper will be
removed so that there is only one access to that module via
`db/ledger/accounts_cache.nim`.
* Fix copyright headers in source code
* Aristo: Provide key-value list signature calculator
detail:
Simple wrappers around `Aristo` core functionality
* Update new API for `CoreDb`
details:
+ Renamed new API functions `contains()` => `hasKey()` or `hasPath()`
which disables the `in` operator on non-boolean `contains()` functions
+ The functions `get()` and `fetch()` always return a not-found error if
there is no item, available. The new functions `getOrEmpty()` and
`mergeOrEmpty()` return an an empty `Blob` if there is no such key
found.
* Rewrite `core_apps.nim` using new API from `CoreDb`
* Use `Aristo` functionality for calculating Merkle signatures
details:
For debugging, the `VerifyAristoForMerkleRootCalc` can be set so
that `Aristo` results will be verified against the legacy versions.
* Provide general interface for Merkle signing key-value tables
details:
Export `Aristo` wrappers
* Activate `CoreDb` tests
why:
Now, API seems to be stable enough for general tests.
* Update `toHex()` usage
why:
Byteutils' `toHex()` is superior to `toSeq.mapIt(it.toHex(2)).join`
* Split `aristo_transcode` => `aristo_serialise` + `aristo_blobify`
why:
+ Different modules for different purposes
+ `aristo_serialise`: RLP encoding/decoding
+ `aristo_blobify`: Aristo database encoding/decoding
* Compacted representation of small nodes' links instead of Keccak hashes
why:
Ethereum MPTs use Keccak hashes as node links if the size of an RLP
encoded node is at least 32 bytes. Otherwise, the RLP encoded node
value is used as a pseudo node link (rather than a hash.) Such a node
is nor stored on key-value database. Rather the RLP encoded node value
is stored instead of a lode link in a parent node instead. Only for
the root hash, the top level node is always referred to by the hash.
This feature needed an abstraction of the `HashKey` object which is now
either a hash or a blob of length at most 31 bytes. This leaves two
ways of representing an empty/void `HashKey` type, either as an empty
blob of zero length, or the hash of an empty blob.
* Update `CoreDb` interface (mainly reducing logger noise)
* Fix copyright years (to make `Lint` happy)
* Aristo: Single `FetchPathNotFound` error in `fetchXxx()` and `hasPath()`
why:
Missing path hike returns too many detailed reasons why it failed
which becomes cumbersome to handle.
also:
Renamed `contains()` => `hasPath()` which disables the `in` operator on
non-boolean `contains()` functions
* Kvt: Renamed `contains()` => `hasKey()`
why:
which disables the `in` operator on non-boolean `contains()` functions
* Aristo: Generalising `HashID` by variable length `PathID`
why:
There are cases when the `Aristo` database is to be used with
shorter than 64 nibbles keys when handling transactions indexes
with sequence IDs.
caveat:
This patch only works reliable for full length `PathID` values. Tests
for shorter `PathID` values are currently missing.
* Make sure that storage tries are not pruned (by default) on the new Ledger API
why:
Pruning might kill some unwanted entries from storage tries ending up with an unstable database
leading to crashes.
* Implement `CoreDb` and `LedgerRef` API tracing
details:
+ Locally enabled at compile time via constants `ProvideCoreDbLegacyAPI`
and `EnableApiTracking` in either `base.nim` source
+ If enabled it can be selectively turned on/off via public switches in
the `CoreDb` descriptor.
* Allow suppressing opportunistic `ifNecessaryGetXxx()` functions
why:
Better troubleshooting when the system crashes (assertions will then
most probably happen outside an `async` function.)
* Provide TDD/debug facility for inspecting `persistBlocks()` working
detail:
+ Make sure that the last block of a test sample is the first batch
item in `persistBlocks()`.
+ Additionally, allow `AccountsCache` API tracing by setting the flag
`extraTraceMessages = true` in the file `accounts_cache.nim`
* Overload AccountsCache by abstraction wrapper
details:
Can facilitate CoreDb API switch, details in `ledger/README.md`.
* CoreDB: Re-org API
details:
Legacy API internally uses vertex ID for root node abstraction
* Cosmetics: Move some unit test helpers to common sub-directory
* Extract constant from `accouns_cache.nim` => `constants.nim`
* Fix tracer methods
why:
Logger dump data were wrongly dumped from the production database. This
caused an assert exception when iterating over the persistent database
(instead of the memory logger.) This event in turn was enabled after
fixing another inconsistency which just set up an empty iterator. Unit
tests failed to detect that.
* Aristo: remove obsolete functions
* Aristo: Fix error code for non-available hash keys
why:
Must not return `not-found` when the key is not available (i.e. the
current changes were not hashified, yet.)
* CoreDB: Provide TDD and test framework
* Split `core_db/base.nim` into several sources
* Rename `core_db/legacy.nim` => `core_db/legacy_db.nim`
* Update `CoreDb` API, dual methods returning `Result[]` or plain value
detail:
Plain value methods implemet the legacy API, they defect on error results
* Redesign `CoreDB` direct backend access
why:
Made the `backend` directive integral part of the API
* Discontinue providing unused or otherwise available functions
details:
+ setTransactionID() removed, not used and not easily replicable in Aristo
+ maybeGet() removed, available via direct backend access
+ newPhk() removed, never used & was experimental anyway
* Update/reorg backend API
why:
+ Added error print function `$$()`
+ General descriptor completion (and optional validation) via `bless()`
* Update `Aristo`/`Kvt` exception handling
why:
Avoid `CatchableError` exceptions, rather pass them as error code where
appropriate.
* More `CoreDB` compliant `Aristo` and `Kvt` methods
details:
+ Providing functions like `contains()`, `getVtxRc()` (returns `Result[]`).
+ Additional error code: `NotImplemented`
* Rewrite/reorg of Aristo DB constructor
why:
Previously used global object `DefaultQidLayoutRef` as default
initialiser. This object was created at compile time which lead to
non-gc safe functions.
* Update nimbus/db/core_db/legacy_db.nim
Co-authored-by: Kim De Mey <kim.demey@gmail.com>
* Update nimbus/db/aristo/aristo_transcode.nim
Co-authored-by: Kim De Mey <kim.demey@gmail.com>
* Update nimbus/db/core_db/legacy_db.nim
Co-authored-by: Kim De Mey <kim.demey@gmail.com>
---------
Co-authored-by: Kim De Mey <kim.demey@gmail.com>
* Kvt: Implemented multi-descriptor access on the same backend
why:
This behaviour mirrors the one of Aristo and can be used for
simultaneous transactions on Aristo + Kvt
* Kvt: Update database iterators
why:
Forgot to run on the top layer first
* Kvt: Misc fixes
* Aristo, use `openArray[byte]` rather than `Blob` in prototype
* Aristo, by default hashify right after cloning descriptor
why:
Typically, a completed descriptor is expected after cloning. Hashing
can be suppressed by argument flag.
* Aristo provides `replicate()` iterator, similar to legacy `replicate()`
* Aristo API fixes and updates
* CoreDB: Rename `legacy_persistent` => `legacy_rocksdb`
why:
More systematic, will be in line with Aristo DB which might have
more than one persistent backends
* CoreDB: Prettify API sources
why:
Better to read and maintain
details:
Annotating with custom pragmas which cleans up the prototypes
* CoreDB: Update MPT/put() prototype allowing `CatchableError`
why:
Will be needed for Aristo API (legacy is OK with `RlpError`)
* Update docu
* Update Aristo/Kvt constructor prototype
why:
Previous version used an `enum` value to indicate what backend is to
be used. This was replaced by using the backend object type.
* Rewrite `hikeUp()` return code into `Result[Hike,(Hike,AristoError)]`
why:
Better code maintenance. Previously, the `Hike` object was returned. It
had an internal error field so partial success was also available on
a failure. This error field has been removed.
* Use `openArray[byte]` rather than `Blob` in functions prototypes
* Provide synchronised multi instance transactions
why:
The `CoreDB` object was geared towards the legacy DB which used a single
transaction for the key-value backend DB. Different state roots are
provided by the backend database, so all instances work directly on the
same backend.
Aristo db instances have different in-memory mappings (aka different
state roots) and the transactions are on top of there mappings. So each
instance might run different transactions.
Multi instance transactions are a compromise to converge towards the
legacy behaviour. The synchronised transactions span over all instances
available at the time when base transaction was opened. Instances
created later are unaffected.
* Provide key-value pair database iterator
why:
Needed in `CoreDB` for `replicate()` emulation
also:
Some update of internal code
* Extend API (i.e. prototype variants)
why:
Needed for `CoreDB` geared towards the legacy backend which has a more
basic API than Aristo.
* Rewrite remaining `AristoError` return code into `Result[void,AristoError]`
why:
Better code maintenance
* Update import sections
* Update Aristo DB paths
why:
More systematic so directory can be shared with other DB types
* More cosmetcs
* Update unit tests runners
why:
Proper handling of persistent and mem-only DB. The latter can be
consistently triggered by an empty DB path.
why:
Additional tables needed for the `CoreDB` object with separate
key-value table and MPT.
details:
+ Stripped down copy of Aristo DB to have a similar look'n feel. Otherwise
it is just a posh way for accessing `Table` objects or `RocksDB` data.
+ No unit tests yet, will be tested on the go.
* Reorg of distributed backend access
details:
Now handled via API provided in `aristo_desc`.
* Rename `checkCache()` => `checkTop()`
why:
Better naming for top layer cache checker
also:
Provide cascaded fifos checker
* Provide `eq` directive for finding filter by exact filter ID (think block number)
* Some code beautification (for better code reading)
* State root reposition and reorg
details:
Repositioning is supported by forking a new descriptor. Reorg is then
accomplished by writing this forked state on the backend database.
details:
* Tested features
+ Successively store filters with increasing filter ID (think block number)
+ Cascading through fifos, deeper fifos merge groups of filters
+ Fetch squash merged N top fifos
+ Delete N top fifos, push back merged fifo, continue storing
+ Fifo chain is verified by hashes and filter ID
* Not tested yet
+ Real live scenario (using data dumps)
+ Real filter data (only shallow filters used so far)
* Set scheduler state as part of the backend descriptor
details:
Moved type definitions `QidLayoutRef` and `QidSchedRef` to
`desc_structural.nim` so that it shares the same folder as
`desc_backend.nim`
* Automatic filter queue table initialisation in backend
details:
Scheduler can be tweaked or completely disabled
* Updated backend unit tests
details:
+ some code clean up/beautification, reads better now
+ disabled persistent filters so that there is no automated filter
management which will be implemented next
* Prettify/update unit tests source code
details:
Mostly replacing the `check()` paradigm by `xCheck()`
* Somewhat simplified backend type management
why:
Backend objects are labelled with a `BackendType` symbol where the
`BackendVoid` label is implicitly assumed for a `nil` backend object
reference.
To make it easier, a `kind()` function is used now applicable to
`nil` references as well.
* Fix DB storage layout for filter objects
why:
Need to store the filter ID with the object
* Implement reverse [] index on fifo
why:
An integer index argument on `[]` retrieves the QueueID (label) of the
fifo item while a QueueID argument on `[]` retrieves the index (so
it is inverse to the former variant).
* Provide iterator over filters as fifo
why:
This iterator goes along the cascased fifo structure (i.e. in
historical order)
* Add backwards index `[]` operator into fifo
also:
Need another maintenance instruction: The last overflow queue must
irrevocably delete some item in order to make space for a new one.
* Add re-org scheduler
details:
Generates instructions how to extract and merge some leading entries
* Add filter ID selector
details:
This allows to find the next filter now newer that a given filter ID
* Message update
* Rename FilterID => QueueID
why:
The current usage does not identify a particular filter but uses it as
storage tag to manage it on the database (to be organised in a set of
FIFOs or queues.)
* Split `aristo_filter` source into sub-files
why:
Make space for filter management API
* Store filter queue IDs in pairs on the backend
why:
Any pair will will describe a FIFO accessed by bottom/top IDs
* Reorg some source file names
why:
The "aristo_" prefix for make local/private files is tedious to
use, so removed.
* Implement filter slot scheduler
details:
Filters will be stored on the database on cascaded FIFOs. When a FIFO
queue is full, some filter items are bundled together and stored on the
next FIFO.
* Remove unused unit test sources
* Redefine and document serialised data records for Aristo backend
why:
Unique record types determined by marker byte, i.e. the last byte of a
serialisation record. This just needed some tweaking after adding new
record types.
* Removed dedicated transcoder tests
why:
will implicitely be provided by other tests:
+ encode/write -> hashify -> test_tx
+ decode/read -> merge raw nodes -> test_tx
+ de/blobfiy -> backend operations, taext_tx, test_backend, test_filter
* Clarify how the vertex ID generator state is accessed from the backend
why:
This state is a list of unused vertex IDs. It was just stored somewhere
on the backend which details were exposed when iterating over some
sub-table(s).
As there will be more such single information records, an admin
sub-tables has been defined (formerly ID generator table) with dedicated
access keys and type. Also, the iterator over the single ID generator
state item has been removed. It must be accessed via the `get()`
interface.
* Remove trailing space from file name
why:
fixes windows bail out
* Remove concept of empty/blind filters
why:
Not needed. A non-existent filter is is coded as a nil reference.
* Slightly generalised backend iterators
why:
* VertexID as key for the ID generator state makes no sense
* there will be more tables addressed by non-VertexID keys
* Store serialised/blobified vertices on memory backend
why:
This is more in line with the RocksDB backend so more appropriate
for testing when comparing behaviour. For a speedy memory database,
a backend-less variant should be used.
* Drop the `Aristo` prefix from names `AristoLayerRef`, etc.
* Suppress compiler warning
why:
duplicate imports
* Add filter serialisation transcoder
why:
Will be used as storage format
* Fix hashing algorithm
why:
Particular case where a sub-tree is on the backend, linked by an
Extension vertex to the top level.
* Update backend verification to report `dirty` top layer
* Implement distributed merge of backend filters
* Implement distributed backend access management
details:
Implemented and tested as described in chapter 5 of the `README.md`
file.
* Renamed type `NoneBackendRef` => `VoidBackendRef`
* Clarify names: `BE=filter+backend` and `UBE=backend (unfiltered)`
why:
Most functions used full names as `getVtxUnfilteredBackend()` or
`getKeyBackend()`. After defining abbreviations (and its meaning) it
seems easier to use `getVtxUBE()` and `getKeyBE()`.
* Integrate `hashify()` process into transaction logic
why:
Is now transparent unless explicitly controlled.
details:
Cache changes imply setting a `dirty` flag which in turn triggers
`hashify()` processing in transaction and `pack()` directives.
* Removed `aristo_tx.exec()` directive
why:
Inconsistent implementation, functionality will be provided with a
different paradigm.
* Provide deep copy for each transaction layer
why:
Localising changes. Selective deep copy was just overlooked.
* Generalise vertex ID generator state reorg function `vidReorg()`
why:
makes it somewhat easier to handle when saving layers.
* Provide dummy back end descriptor `NoneBackendRef`
* Optional read-only filter between backend and transaction cache
why:
Some staging area for accumulating changes to the backend DB. This
will eventually be an access layer for emulating a backend with
multiple/historic state roots.
* Re-factor `persistent()` with filter between backend/tx-cache => `stow()`
why:
The filter provides an abstraction from the physically stored data on
disk. So, there can be several MPT instances using the same disk data
with different state roots. Of course, all the MPT instances should
not differ too much for practical reasons :).
TODO:
Filter administration tools need to be provided.
* Better error handling
why:
Bail out on some error as early as possible before any changes.
* Implement `fetch()` as opposite of `merge()`
rationale:
In the `Aristo` realm, the action named `fetch()` and `merge()` indicate
leaf value related actions on the MPT, while actions `get()` and `put()`
handle vertex or hash key related operations that constitute the MPT.
* Re-factor `merge()` prototypes
why:
The most used variant of `merge()` should have the simplest prototype.
* Persistent DB constructor needs to import `aristo/aristo_init/persistent`
why:
Most applications use memory DB anyway. This avoids linking `-lrocksdb`
or any other back end libraries by default.
* Re-factor transaction module
why:
Got the paradigm wrong. The transaction descriptor did replace the
database one but should be handled separately.
* Nimbus folder environment update
details:
* Integrated `CoreDbRef` for the sources in the `nimbus` sub-folder.
* The `nimbus` program does not compile yet as it needs the updates
in the parallel `stateless` sub-folder.
* Stateless environment update
details:
* Integrated `CoreDbRef` for the sources in the `stateless` sub-folder.
* The `nimbus` program compiles now.
* Premix environment update
details:
* Integrated `CoreDbRef` for the sources in the `premix` sub-folder.
* Fluffy environment update
details:
* Integrated `CoreDbRef` for the sources in the `fluffy` sub-folder.
* Tools environment update
details:
* Integrated `CoreDbRef` for the sources in the `tools` sub-folder.
* Nodocker environment update
details:
* Integrated `CoreDbRef` for the sources in the
`hive_integration/nodocker` sub-folder.
* Tests environment update
details:
* Integrated `CoreDbRef` for the sources in the `tests` sub-folder.
* The unit tests compile and run cleanly now.
* Generalise `CoreDbRef` to any `select_backend` supported database
why:
Generalisation was just missed due to overcoming some compiler oddity
which was tied to rocksdb for testing.
* Suppress compiler warning for `newChainDB()`
why:
Warning was added to this function which must be wrapped so that
any `CatchableError` is re-raised as `Defect`.
* Split off persistent `CoreDbRef` constructor into separate file
why:
This allows to compile a memory only database version without linking
the backend library.
* Use memory `CoreDbRef` database by default
detail:
Persistent DB constructor needs to import `db/core_db/persistent
why:
Most tests use memory DB anyway. This avoids linking `-lrocksdb` or
any other backend by default.
* fix `toLegacyBackend()` availability check
why:
got garbled after memory/persistent split.
* Clarify raw access to MPT for snap sync handler
why:
Logically, `kvt` is not the raw access for the hexary trie (although
this holds for the legacy database)
why:
* Resolves some compiler coughing when it bails out on persitent
db constructor inside `test()` caluses (works perfectly outside.)
* API looks cleaner and better to maintain for the price of slightly
more work at the backend
* Remove 32bit os support from `custom_network` unit test
also:
* Fix compilation annoyance #1648
* Fix unit test on Kiln (changed `merge` logic?)
* Hide unused sources do not compile
why:
* Get them out of the way before major update
* Import and function prototype mismatch -- maybe some changes got out
of scope.
* Re-implemented `db_chain` as `core_db`
why:
Hiding `TrieDatabaseRef` and `HexaryTrie` by default allows to replace
the current db wrapper by some other one, e.g. Aristo
* Support compiler exception warnings for CoreDbRef base methods.
* Allow `pairs()` iterator on all memory based key-value tables
why:
Previously only available for capture recorder.
* Backport `chain_db.nim` changes into its re-implementation `core_apps.nim`
* Fix exception annotation
* Misc fixes
detail:
* Fix de-serialisation for account leafs
* Update node recovery from unit tests
* Remove `LegacyAccount` from `PayloadRef` object
why:
Legacy accounts use a hash key as storage root which is detrimental
to the working of the Aristo database which uses a vertex ID.
* Dissolve `hashify_helper` into `aristo_utils` and `aristo_transcode`
why:
Functions are of general interest so they should live in first level
code files.
* Added left/right iterators over leaf nodes
* Some helper/wrapper functions that might be useful
why:
For the main tree with root vertex ID 1, the leaf nodes hold the
account data. These accounts may link to sub trees the storage root
node ID of which must be registered here. There is no reverse key
lookup on the backend.
note:
These definitions are experimental. Also, there are some tests missing
for validating Payload data conversions.
Jordan Hrycaj
Kim De Mey
jangko