The CI takes a long time (sometimes hours) and shouldn't hold up
documentation-only commits. We may also find CI for other changes starts
faster, if we're not using up as many credits. When we process documentation
into something nicer (like `nimbus.guide`) we'll need to revisit this.
Syntax from [example ignoring paths](https://docs.github.com/en/actions/reference/workflow-syntax-for-github-actions#example-ignoring-paths).
Signed-off-by: Jamie Lokier <jamie@shareable.org>
Morden network has not had a working configuration in Nimbus for a few years,
so it's been removed form the main program. Remove it from premix as well.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
Capitalisation:
- The option is lower case `--logmetrics` but help said `--logMetrics`
- Same for `--logmetricsiterval`
- Same for `--metricsserver` and `--metricsserverport`
Ethereum network selection:
- Moved out into their own, cleaner help section
- Added help for `--mainnet`, `--goerli` and `--kovan`
- Moved `--networkid` and `--customnetwork` to this section as well
Other:
- Reworded or formatted some help lines for clarity and consistency
Changed options:
- Renamed `--metricserver` to `--metrics`
- Renamed `--matricsserverport` to `--metricsport`
- Removed Morden network; this didn't have an option, but could be
selected with `--networkid:2` and then fail to work
Signed-off-by: Jamie Lokier <jamie@shareable.org>
a crash bug is found in nim-graphql validator for
input object value coercion. the bug already fixed.
another non critical bug is about builtin 'specifiedByURL'
directive changed to 'specifiedBy' following the newest
graphql spec.
This patch reduces stack space used with EVM in ENABLE_EVMC=1 mode, from 13 MB
worst case to 550 kB, a 24x reduction.
This completes fixing the "stack problem" and closes#575 (`EVM: Different
segmentation faults when running the test suite with EVMC`).
It also closes#256 (`recursive EVM call trigger unrecoverable stack overflow`).
After this patch, it is possible to re-enable the CI targets which had to be
disabled due to #575.
This change is also a required precursor for switching over to "nearly EVMC" as
the clean and focused Nimbus-internal API between EVM and sync/database
processes, and is also key to the use of Chronos `async` in those processes
when calling the EVM.
(The motivation is the internal interface has to be substantially changed
_anyway_ for the parallel sync and database processes, and EVMC turns out to be
well-designed and well-suited for this. It provides good separation between
modules, and suits our needs better than our other current interface. Might as
well use a good one designed by someone else. EVMC is 98% done in Nimbus
thanks to great work done before by @jangko, and we can use Nimbus-specific
extensions where we need flexibility, including for performance. Being aligned
with the ecosystem is a useful bonus feature.)
All tests below were run on Ubuntu 20.04 LTS server, x86-64. This matches one
of the targets that has been disabled for a while in CI in EVMC mode due to
stack overflow crashing the tests, so it's a good choice.
Measurements before
===================
Testing commit `e76e0144 2021-04-22 11:29:42 +0700 add submodules: graphql and
toml-serialization`.
$ rm -f build/all_tests && make ENABLE_EVMC=1 test
$ ulimit -S -s 16384 # Requires larger stack than default to avoid crash.
$ ./build/all_tests 9 | tee tlog
[Suite] persist block json tests
...
Stack range 38416 depthHigh 3
...
Stack range 13074720 depthHigh 1024
[OK] tests/fixtures/PersistBlockTests/block1431916.json
These tests use 13.07 MB of stack to run, and so crash with the default stack
limit on Ubuntu Server 20.04 (8MB). Exactly 12768 bytes per EVM call stack
frame.
$ rm -f build/all_tests && make ENABLE_EVMC=1 test
$ ulimit -S -s 16384 # Requires larger stack than default.
$ ./build/all_tests 7 | tee tlog
[Suite] new generalstate json tests
...
Stack range 14384 depthHigh 2
...
Stack range 3495456 depthHigh 457
[OK] tests/fixtures/eth_tests/GeneralStateTests/stRandom2/randomStatetest639.json
...
Stack range 3709600 depthHigh 485
[OK] tests/fixtures/eth_tests/GeneralStateTests/stRandom2/randomStatetest458.json
...
Stack range 7831600 depthHigh 1024
[OK] tests/fixtures/eth_tests/GeneralStateTests/stCreate2/Create2OnDepth1024.json
These tests use 7.83MB of stack to run. About 7648 bytes per EVM call stack
frame. It _only just_ avoids crashing with the default Ubuntu Server stack
limit of 8 MB. However, it still crashes on Windows x86-64, which is why the
Windows CI EVMC target is currently disabled.
On Linux where this passes, this is so borderline that it affects work and
testing of the complex storage code, because that's called from the EVM.
Also, this greatly exceeds the default thread stack size.
Measurements after
==================
$ rm -f build/all_tests && make ENABLE_EVMC=1 test
$ ulimit -S -s 600 # Because we can! 600k stack.
$ ./build/all_tests 9 | tee tlog
[Suite] persist block json tests
...
Stack range 1936 depthHigh 3
...
Stack range 556272 depthHigh 1022
Stack range 556512 depthHigh 1023
Stack range 556816 depthHigh 1023
Stack range 557056 depthHigh 1024
Stack range 557360 depthHigh 1024
[OK] tests/fixtures/PersistBlockTests/block1431916.json
$ rm -f build/all_tests && make ENABLE_EVMC=1 test
$ ulimit -S -s 600 # Because we can! 600k stack.
$ ./build/all_tests 7 | tee tlog
[Suite] new generalstate json tests
...
Stack range 1392 depthHigh 2
...
Stack range 248912 depthHigh 457
[OK] tests/fixtures/eth_tests/GeneralStateTests/stRandom2/randomStatetest639.json
...
Stack range 264144 depthHigh 485
[OK] tests/fixtures/eth_tests/GeneralStateTests/stRandom2/randomStatetest458.json
...
Stack range 557360 depthHigh 1024
[OK] tests/fixtures/eth_tests/GeneralStateTests/stStaticCall/static_CallRecursiveBombPreCall.json
For both tests, a satisfying *544 bytes* per EVM call stack frame, and EVM
takes less than 600 kB total. With other overheads, both tests run in 600 kB
stack total at maximum EVM depth.
We must add some headroom on this for database activity called from the EVM,
and different compile targets. But it means the EVM itself is no longer a
stack burden.
This is much smaller than the default thread stack size on Linux (2MB), with
plenty of margin. (Just fyi, it isn't smaller than a _small_ thread stack on
Linux from a long time ago (128kB), and some small embedded C targets.)
This size is well suited to running EVMs in threads.
Further reduction
=================
This patch solves the stack problem. Windows and Linux 64-bit EVMC CI targets
can be re-enabled, and there is no longer a problem with stack usage.
We can reduce further to ~340 bytes per frame and 350 kB total, while still
complying with EVMC. But as this involves changing how errors are handled to
comply fully with EVMC, and removing `dispose` calls, it's not worth doing now
while there are other EVMC changes in progress that will have the same effect.
A Nimbus-specific extension will allow us to avoid recursion with EVMC anyway,
bringing bytes per frame to zero. We need the extension anyway, to support
Chronos `async` which parallel transaction processing is built around.
Interop with non-Nimbus over EVMC won't let us avoid recursion, but then we
can't control the stack frame size either. To prevent stack overflow in
interop I anticipate using (this method in Aleth)
[6e96ce34e3/libethereum/ExtVM.cpp (L61)].
Smoke test other versions of GCC and Clang/LLVM
===============================================
As all builds including Windows use GCC or Apple's Clang/LLVM, this is just to
verify we're in the right ballpark on all targets. I've only checked `x86_64`
though, not 32-bit, and not ARM.
It's interesting to see GCC 10 uses less stack. This is because it optimises
`struct` returns better, sometimes skipping an intermediate copy. Here it
benefits the EVMC API, but I found GCC 10 also improves the larger stack usage
of the rest of `nimbus-eth1` as well.
Apple clang 12.0.0 (clang-1200.0.26.2) on MacOS 10.15:
- 544 bytes per EVM call stack frame
GCC 10.3.0 (Ubuntu 10.3.0-1ubuntu1) on Ubuntu 21.04:
- 464 bytes per EVM call stack frame
GCC 10.2.0 (Ubuntu 10.2.0-5ubuntu1~20.04) on Ubuntu 20.04 LTS:
- 464 bytes per EVM call stack frame
GCC 11.0.1 20210417 (experimental; Ubuntu 11-20210417-1ubuntu1) on Ubuntu 21.04:
- 8 bytes per EVM call stack frame
GCC 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04) on Ubuntu 20.04 LTS:
- 544 bytes per EVM call stack frame
GCC 8.4.0 (Ubuntu 8.4.0-3ubuntu2) on Ubuntu 20.04 LTS:
- 544 bytes per EVM call stack frame
GCC 7.5.0 (Ubuntu 7.5.0-6ubuntu2) on Ubuntu 20.04 LTS:
- 544 bytes per EVM call stack frame
GCC 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2) on Ubuntu 19.10:
- 528 bytes per EVM call stack frame
Signed-off-by: Jamie Lokier <jamie@shareable.org>
- Explain some of the prerequisites in more detail (Go version).
- Practical issues around Go version and Docker configuration to make it work.
- Make the first example be one that works with nimbus-eth1.
(Instead of giving an obscure error message that looks like the user's Docker
setup is broken).
- Rename to `README.md` per convention.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
disableParamFiltering() is called in test_all, so its ok when
called via test_all. but when test_generalstate_json or
test_blockchain_json is called independently, and we are using
command line switch, the default param handler from std/unittest
will interfere. hence need to disable it.
instead of using header as input param, now getReceipts using
receiptRoot hash, the intention is clearer and less data passed around
when we only using receiptRoot instead of whole block header.
recent nim-serialization API changes already made it's way into
toml-serialization. and with the addition of newest toml-serialization
along with it's bugfixes, those submodules mentioned above
become out of date because toml-serialization need newer version of
nim-serialization.
why:
these files provide part of the externally accessible interface
provided by vm_cpmputation.nim, vm_internals.nim. so the
new filename indicates that the source code belongs to vm2 (rather
than vm).
why:
these files provide part of the externally accessible interface
provided by vm_message.nim, vm_precompile.nim, vm_gas_cost.nim. so the
new filename indicates that the source code belongs to vm2 (rather
than vm).
why:
these files provide part of the externally accessible interface
provided by vm_state*.nim. so the new filename indicates that the
source code belongs to vm2 (rather than vm).
why:
these files provide part of the externally accessible interface
provided by vm_types*.nim. so the new filename indicates that the
source code belongs to vm2 (rather than vm).
why:
making sure that deep links into vm2 sources are configured properly. it
is intended that only the vm_*.nim interface headers are allowed to
source files in vm2. the sentinels just protect from coding errors.
why:
vm2 enabled by ENABLE_VM2=1 behaves as vm without ENABLE_EVMC=1 until
it doesn't in some future fatch set. this leaves some wiggle room
to work on a vm copy without degrading the original implementation.
details:
+ additional make flag ENABLE_VM2=1 (or ENABLE_VM2=0 to explicitely disable)
+ when both flags ENABLE_EVMC=1 and ENABLE_VM2=1 are present, the former
flag ENABLE_EVMC=1 takes precedence, this is implemented at the NIM
compiler level for -d:evmc_enabled and -d:vm2_enabled
Script to run Nimbus-eth1 syncing to any of the networks that Geth supports
by name, connecting to a single dedicated peer for that network.
All protocols are disabled other than the minimum we need for block sync.
This is very helpful for debugging and improving pipelined sync, and for
improving the database and other processing, even though p2p sync is the
endgame.
- Discovery protocols are turned off
- NAT hole punching protocols are turned off
- Whisper protocol is turned off (`--protocols:eth`)
- The only connection is to a single, active Geth for that network.
- Each network's data is stored in a different location to avoid conflicts.
- Each network is accessed by binding to a different port locally,
so we can run several at the same time.
- Log level is set to `TRACE` because we can read them when we're not
swamped with discovery messages. Sync isn't fast enough yet.
There's been a lot of talk about the Nimbus EVM "stack problem". I think we
assumed changing it would require big changes to the interpreter code, touching
a lot of functions.
It turned out to be a low hanging fruit.
This patch solves the stack problem, but hardly touches anything. The change
in EVM stack memory is from 13 MB worst case to just 48 kB, a 250x reduction.
I've been doing work on the database/storage/trie code. While looking at the
API between the EVM and the database/storage/trie, this stack patch stood out
and made itself obvious. As it's tiny, rather than more talk, here it is.
Note: This patch is intentionally small, non-invasive, and hopefully easy to
understand, so that it doesn't conflict with other work done on the EVM, and
can easily be grafted into any other EVM structure.
Motivation
==========
- We run out of space and crash on some targets, unless the stack limit is
raised above its default. Surprise segmentation faults are unhelpful.
- Some CI targets have been disabled for months due to this.
- Because usage borders on the system limits, when working on
database/storage/trie/sync code (called from the EVM), segmentation faults
occur and are misleading. They cause lost time due to thinking there's a
crash bug in the code being worked on, when there's nothing wrong with it.
- Sometimes unrelated, trivial code changes elsewhere trigger CI test failures.
It looks like abrupt termination. A simple, recent patch was crashing in
`make test` even though it was a trivial refactor. Turns out it pushed the
stack over the edge.
- A large stack has to be scanned by the Nim garbage collector sometimes.
Larger stack means slower GC and memory allocation.
- The structure of this small patch suggests how to weave async into the EVM
with almost no changes to the EVM, and no async transformation overhead.
- The patch seemed obvious when working on the API between EVM and storage.
Measurements before
===================
All these tests were run on Ubuntu 20.04 server, x86-64. This is one of the
targets that has been disabled for a while in CI in EVMC mode due to crashing,
and excessive stack usage is the cause.
Testing commit 0c34a8e3 `2021-04-08 17:46:00 +0200 CI: use MSYS2 on Windows`.
$ rm -f build/all_tests && make ENABLE_EVMC=1 test
$ ulimit -S -s 16384 # Requires larger stack than default to avoid crash.
$ ./build/all_tests 9 | tee tlog
[Suite] persist block json tests
...
Stack range 38496 depthHigh 3
...
Stack range 13140272 depthHigh 1024
[OK] tests/fixtures/PersistBlockTests/block1431916.json
These tests use 13.14 MB of stack to run, and so crash with the default stack
limit on Ubuntu Server 20.04 (8MB). Exactly 12832 bytes per EVM call stack
frame. It's interesting to see some stack frames take a bit more.
$ rm -f build/all_tests && make ENABLE_EVMC=1 test
$ ulimit -S -s 16384 # Requires larger stack than default.
$ ./build/all_tests 7 | tee tlog
[Suite] new generalstate json tests
...
Stack range 15488 depthHigh 2
...
Stack range 3539312 depthHigh 457
[OK] tests/fixtures/eth_tests/GeneralStateTests/stRandom2/randomStatetest639.json
...
Stack range 3756144 depthHigh 485
[OK] tests/fixtures/eth_tests/GeneralStateTests/stRandom2/randomStatetest458.json
...
Stack range 7929968 depthHigh 1024
[OK] tests/fixtures/eth_tests/GeneralStateTests/stCreate2/Create2OnDepth1024.json
These tests use 7.92MB of stack to run. About 7264 bytes per EVM call stack
frame. It _only just_ avoids crashing with the default Ubuntu Server stack
limit of 8 MB. However, it still crashes on Windows x86-64, which is why the
CI target is currently disabled.
On Linux where this passes, this is so borderline that it affects work and
testing of storage and sync code, because that's called from the EVM. Which
was a motivation for dealing with the stack instead of letting this linger.
Also, this stack greatly exceeds the default thread stack size.
$ rm -f build/all_tests && make ENABLE_EVMC=0 test
$ ulimit -S -s 16384 # Requires larger stack than default to avoid crash.
$ ./build/all_tests 9 | tee tlog
[Suite] persist block json tests
...
Stack range 33216 depthHigh 3
...
Stack range 11338032 depthHigh 1024
[OK] tests/fixtures/PersistBlockTests/block1431916.json
These tests use 11.33 MB stack to run, and so crash with a default stack limit
of 8MB. Exactly 11072 bytes per EVM call stack frame. It's interesting to see
some stack frames take a bit more.
$ rm -f build/all_tests && make ENABLE_EVMC=0 test
$ ulimit -S -s 16384 # Requires larger stack than default.
$ ./build/all_tests 7 | tee tlog
[Suite] new generalstate json tests
...
Stack range 10224 depthHigh 2
...
Stack range 2471760 depthHigh 457
[OK] tests/fixtures/eth_tests/GeneralStateTests/stRandom2/randomStatetest639.json
...
Stack range 2623184 depthHigh 485
[OK] tests/fixtures/eth_tests/GeneralStateTests/stRandom2/randomStatetest458.json
...
Stack range 5537824 depthHigh 1024
[OK] tests/fixtures/eth_tests/GeneralStateTests/stCreate2/Create2OnDepth1024.json
These tests use 5.54 MB of stack to run, and avoid crashing on with a default
stack limit of 8 MB. About 5408 bytes per EVM call stack frame.
However, this is uncomfortably close to the limit, as the stack frame size is
sensitive to changes in the code.
Also, this stack greatly exceeds the default thread stack size.
Measurements after
==================
(This patch doesn't address EVMC mode, which is not our default. EVMC stack
usage remains about the same. EVMC mode is addressed in another tiny patch.)
$ rm -f build/all_tests && make ENABLE_EVMC=0 test
$ ulimit -S -s 80 # Because we can! 80k stack.
$ ./build/all_tests 9 | tee tlog
[Suite] persist block json tests
...
Stack range 496 depthHigh 3
...
Stack range 49504 depthHigh 1024
[OK] tests/fixtures/PersistBlockTests/block1431916.json
$ rm -f build/all_tests && make ENABLE_EVMC=0 test
$ ulimit -S -s 72 # Because we can! 72k stack.
$ ./build/all_tests 7 | tee tlog
[Suite] new generalstate json tests
...
Stack range 448 depthHigh 2
...
Stack range 22288 depthHigh 457
[OK] tests/fixtures/eth_tests/GeneralStateTests/stRandom2/randomStatetest639.json
...
Stack range 23632 depthHigh 485
[OK] tests/fixtures/eth_tests/GeneralStateTests/stRandom2/randomStatetest458.json
...
Stack range 49504 depthHigh 1024
[OK] tests/fixtures/eth_tests/GeneralStateTests/stCreate2/Create2OnDepth1024.json
For both tests, a satisfying *48 bytes* per EVM call stack frame, and EVM takes
not much more than 48 kB. With other overheads, both tests run in 80 kB stack
total at maximum EVM depth.
We must add some headroom on this for database activity called from the EVM,
and different compile targets. But it means the EVM itself is no longer a
stack burden.
This is much smaller than the default thread stack size on Linux (2MB), with
plenty of margin. It's even smaller than Linux from a long time ago (128kB),
and some small embedded C targets. (Just fyi, though, some JVM environments
allocated just 32 kB to thread stacks.)
This size is also well suited to running EVMs in threads, if that's useful.
Subtle exception handling and `dispose`
=======================================
It is important that each `snapshot` has a corresponding `dispose` in the event
of an exception being raised. This code does do that, but in a subtle way.
The pair of functions `execCallOrCreate` and `execCallOrCreateAux` are
equivalent to the following code, where you can see `dispose` more clearly:
proc execCallOrCreate*(c: Computation) =
defer: c.dispose()
if c.beforeExec():
return
c.executeOpcodes()
while not c.continuation.isNil:
c.child.execCallOrCreate()
c.child = nil
(c.continuation)()
c.executeOpcodes()
c.afterExec()
That works fine, but only reduces the stack used to 300-700 kB instead of 48 kB.
To get lower we split the above into separate `execCallOrCreate` and
`execCallOrCreateAux`. Only the outermost has `defer`, and instead of handling
one level, it walks the entire `c.parent` chain calling `dispose` if needed.
The inner one avoids `defer`, which greatly reduces the size of its stackframe.
`c` is a `var` parameter, at each level of recursion. So the outermost proc
sees the temporary changes made by all inner calls. This is why `c` is updated
and the `c.parent` chain is maintained at each step.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
* switch to chronos metrics, remove insecure
See https://github.com/status-im/nimbus-eth2/pull/2468
also fixes pcre linking for real, and adds some random build flags that
help nimbus-eth2 stay afloat
* fix help
* don't omit frame pointers on windows
The "new block chain json tests" were being skipped on Linux, but silently so
that CI didn't notice. These are a significant part of the Ethereum test suite.
See the missing output from `make test`, also visible in CI logs for Linux
targets (prior to this commit):
[OK] tests/fixtures/eth_tests/TransactionTests/ttGasPrice/TransactionWithGasPriceOverflow.json
[OK] tests/fixtures/eth_tests/TransactionTests/ttGasPrice/TransactionWithHighGasPrice.json
[Suite] new block chain json tests
<-- nothing here
[Suite] Fork ID tests
[OK] MainNet
[OK] RopstenNet
Commit 3d468a7 (`fixes path pointing to eth_tests`) renamed the JSON fixture
source directoryf in the witness-builder tests but not the regular blockchain
tests. As a result, searching for JSON test files yielded zero results. To
make this less likely in future, zero results is now an error.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
Commit 3d468a7 (`fixes path pointing to eth_tests`) renamed a test output
file subtly, changing just the capitalisation:
- jsonTest(newFolder, "newBlockChainTests", testFixture, skipNewBCTests)
+ jsonTest(newFolder, "newBlockchainTests", testFixture, skipNewBCTests)
However, the file checked into the repo continued to be the old name, uppercase
`C`. Of course, Mac and Windows have a sort of case insensitivity and Linux
does not.
This meant, on Linux, both files were created, test differences didn't make
themselves visible in `git diff`, and the repo would not get updates with
changed test output. On Mac and Windows it worked.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
Prior to this commit, when using discv4 (Kademlia) to find peers, there is a
crash after a few minutes. It occurs for most of us on Eth1 mainnet, and
everyone on Ropsten.
Tested for about 4 days constant operation on Ropsten. The crash which occured
every few minutes no longer occurs, and discv4 keeps working.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
why:
it was convenient to have relocatable source modules when writing the
vm interface wrappers. this patch moves it back to the standard.
also:
there are no deep links into the vm folder anymore which leaves some
room for manoeuvring inside
Jamie Lokier
jangko
Jordan Hrycaj
Ștefan Talpalaru
Jacek Sieka
kdeme