* Update sync scheduler pool mode
why:
The pool mode allows to loop over active peers one after another. This
is ideal for soft re-starting peers. As this is a two tier experience
(start/stop, setup/release) the loop must be run twice. This is
controlled by a more rigid re-definition of how to use the `poolMode`
flag.
* Mitigate RLP serialiser deficiency
why:
Currently, serialising the `BlockBody` in not conevrtible and need
to be checked in the `eth` module. Currently a local fix for the
wire protocol applies. Unit tests will stay (after this local solution
will have been removed.)
* Code cosmetics and massage
details:
Main part is `types.toStr()` as a unified function for logging block
numbers.
* Allow to use a logical genesis replacement (start of history)
why:
Snap sync will set up an arbitrary pivot at a block number different
from zero. In fact, the higher the block number the better.
details:
A non-genesis start of history will currently only affect the score
values which were derived from the difficulty.
* Provide function to store the snap pivot block header in chain db
why:
Together with the start of history facility, this allows to proceed
with full syncing once snap has finished.
details:
Snap db storage was switched from a sub-tables to the flat chain db.
* Provide database completeness and sanity checker
details:
For debugging on smaller databases, only
* Implement snap -> full sync switch
* Update nearby/neighbour leaf nodes finder
details:
Update return error codes so that in the case that there is no more
leaf node beyond the search direction, the particular error code
`NearbyBeyondRange` is returned.
* Compile largest interval range containing only this leaf point
why:
Will be needed in snap sync for adding single leaf nodes to the range
of already allocated nodes.
* Reorg `hexary_inspect.nim`
why:
Merged the nodes collecting algorithm for persistent and in-memory
into a single generic function `hexary_inspect.inspectTrieImpl()`
* Update fetching accounts range failure handling in `rangeFetchAccounts()`
why:
Rejected response leads now to fetching for another account range. Only
repeated failures (or all done) terminate the algorithm.
* Update accounts healing
why:
+ Fixed looping over a bogus node response that could not inserted into
the database. As a solution, these nodes are locally registered and not
asked for in this download cycle.
+ Sub-optimal handling of interval range for a healed account leaf node.
Now the maximal range interval containing this node is registered as
processed which leafs to de-fragementation of the processed (and
unprocessed) range list(s). So *gap* ranges which are known not to
cover any account leaf node are not asked for on the network, anymore.
+ Sporadically remove empty interval ranges (if any)
* Update logging, better variable names
* Add state root to node steps path register `RPath` or `XPath`
why:
Typically, the first node in the path register is the state root. There
are occasions, when the path register is empty (i.e. there are no node
references) which typically applies to a zero node key.
In order to find the next node key greater than zero, the state root is
is needed which is now part of the `RPath` or `XPath` data types.
* Extracted hexary tree debugging functions into separate files
* Update empty path fringe case for left/right node neighbour
why:
When starting at zero, the node steps path register would be empty. So
will any path that is before the fist non-zero link of a state root (if
it is a `Branch` node.)
The `hexaryNearbyRight()` or `hexaryNearbyLeft()` function required a
non-zero node steps path register. Now the first node is to be advanced
starting at the first state root link if necessary.
* Simplify/reorg neighbour node finder
why:
There was too mach code repetition for the cases
* persistent or in-memory database
* left or right move
details:
Most algorithms apply for persistent and in-memory alike. Using
templates/generic functions most of these algorithms can be stated
in a unified way
* Update storage slots snap/1 handler
details:
Minor changes to be more debugging friendly.
* Fix detection of full database for snap sync
* Docu: Snap sync test & debugging scenario
* Handle last/all node(s) proof conditions at leaf node extractor
detail:
Flag whether the maximum extracted node is the last one in database
No proof needed if the full tree was extracted
* Clean up some helpers & definitions
details:
Move entities to more plausible locations, e.g. `Account` object need
not be dealt with in the range extractor as it applies to any kind of
leaf data.
* Fix next/prev database walk fringe condition
details:
First check needed might be for a leaf node which was done too late.
* Homogenise snap/1 protocol function prototypes
why:
The range arguments `origin` and `limit` data types differed in various
function prototypes (`Hash256` vs. `openArray[byte]`.)
* Implement `GetStorageRange` handler
* Implement server timeout for leaf node retrieval
why:
This feature leaves control on the server for probably costly action
invoked by the network
* Implement maximal reply size for snap service
why:
This feature leaves control on the server for probably costly action
invoked by the network.
* Clean up some function prototypes
why:
Simplify polymorphic prototype variances for easier maintenance.
* Fix fringe condition crash when importing bogus RLP node
why:
Accessing non-list RLP entry as a list causes `Defect`
* Fix left boundary proof at range extractor
why:
Was insufficient. The main problem was that there was no unit test for
the validity of the generated left boundary.
* Handle incomplete left boundary proofs early
why:
Attempt to do it later leads to overly complex code in order to prevent
looping when the same peer repeats to send the same incomplete proof.
Contrary, gaps in the leaf sequence can be handled gracefully with
registering the gaps
* Implement a manual pivot setup mechanism for snap sync
why:
For a test scenario it is convenient to set the pivot to something
lower than the beacon header from the consensus layer. This does not
need rely on any RPC mechanism.
details:
The file containing the pivot specs is specified by the
`--sync-ctrl-file` option. It is regularly parsed for updates.
* Fix calculation error
why:
Prevent from calculating negative square root
* Renaming androgynous sub-object names according to where they belong
why:
These objects are not explicitly dealt with. They give meaning to
some generic wrapper objects. Naming them after their origin may
help troubleshooting.
* Redefine proof nodes list data type for `snap/1` wire protocol
why:
The current specification suffered from the fact that the basic data
type for a proof node is an RLP encoded hexary node. This slightly
confused the encoding/decoding magic.
details:
This is the second attempt, now wrapping the `seq[Blob]` into a
wrapper object of `seq[SnapProof]` for a distinct alias sequence.
In the previous attempt, `SnapProof` was a wrapper object holding the
`Blob` with magic applied to the `seq[]`. This needed the `append`
mixin to strip the outer wrapper that was applied to the `Blob` already
when it was passed as argument.
* Fix some prototype inconsistency
why:
For easy reading, `getAccountRange()` handler return code should
resemble the `accoundRange()` anruments prototype.
* Enable `snap/1` accounts range service
* Allow to change the garbage collector to `boehm` as a Makefile option.
why:
There is still an unsolved memory corruption problem that might be
related to the standard `gc`. It seemingly goes away if the `gc` is
changed to `boehm`.
Specifying another `gc` on the make level simplifies debugging and
development.
* Code cosmetics
details:
* updated exception annotations
* extracted `worker_desc.nim` from `full/worker.nim`
* etc.
* Implement option to state a sync modifier file
why:
This allows to specify extra sync type specific options which might
change over time. This file is regularly checked for updates.
* Implement a threshold when to suspend full syncing
why:
For a test scenario, a full sync beep may work as a local snap server.
There is no need to download the full block chain.
details:
The file containing the pivot specs is specified by the
`--sync-ctrl-file` option. It is regularly parsed for updates.
* Redefine `seq[Blob]` => `seq[SnapProof]` for `snap/1` protocol
why:
Proof nodes are traded as `Blob` type items rather than Nim objects. So
the RLP transcoder must not extra wrap proofs which are of type
seq[Blob]. Without custom encoding one would produce a
`list(blob(item1), blob(item2) ..)` instead of `list(item1, item2 ..)`.
* Limit leaf extractor by RLP size rather than number of items
why:
To be used serving `snap/1` requests, the result of function
`hexaryRangeLeafsProof()` is limited by the maximal space
needed to serialise the result which will be part of the
`snap/1` repsonse.
* Let the range extractor `hexaryRangeLeafsProof()` return RLP list sizes
why:
When collecting accounts, the size oft the accounts list when encoded
as RLP is continually updated. So the summed up value is available
anyway. For the proof nodes list, there are not many (~ 10) so summing
up is not expensive here.
* Unit tests to verify calculations based on hard coded constants
why:
Sizes of RLP encoded objects are available at run time only.
* Changed argument order for `hexaryRangeLeafsProof()` prototype
why:
Better to read as a stand-alone function (arguments were optimised
for functional pipelines)
* Run sub-range proof tests for extracted ranges
* Silence some compiler gossip -- part 1, tx_pool
details:
Mostly removing redundant imports and `Defect` tracer after switch
to nim 1.6
* Silence some compiler gossip -- part 2, clique
details:
Mostly removing redundant imports and `Defect` tracer after switch
to nim 1.6
* Silence some compiler gossip -- part 3, misc core
details:
Mostly removing redundant imports and `Defect` tracer after switch
to nim 1.6
* Silence some compiler gossip -- part 4, sync
details:
Mostly removing redundant imports and `Defect` tracer after switch
to nim 1.6
* Clique update
why:
Missing exception annotation
* Update comments and test noise
* Fix boundary proofs
why:
Where neither used in production, nor unit tested. For production, other
methods apply to test leaf range integrity directly based of the proof
nodes.
* Added `hexary_range()`: interval range + proof extractor
details:
+ Will be used for `snap/1` protocol handler
+ Unit tests added (also for testing left boundary proof)
todo:
Need to verify completeness of proof nodes
* Reduce some nim 1.6 compiler noise
* Stop unit test gossip for ci tests
Jordan Hrycaj