* Use unittest2 test runner
Since upgrading to unittest2, the test runner prints the command line to
re-run a failed test - this however relies on actually using the
unittest2 command line runner.
Previously, test files were assigned numbers - with the unittest2
runner, tests are run using suite/category names instead, like so:
```
# run the Genesis suite
build/all_tests "Genesis::``
# run all tests with "blsMapG1" in the name
build/all_tests "blsMapG1*"
# run tests verbosely
build/all_tests -v
```
A reasonable follow-up here would be to review the suite names to make
them easier to run :)
* lint
* easier-to-compare test order
* bump unittest2 (also the repo)
* renamed nimbus folder to execution_chain
* Renamed "nimbus" references to "execution_chain"
* fixed wrongly changed http reference
* delete snap types file given that it was deleted before this PR merge
* missing 'execution_chain' replacement
---------
Co-authored-by: pmmiranda <pedro.miranda@nimbus.team>
* aristo: fork support via layers/txframes
This change reorganises how the database is accessed: instead holding a
"current frame" in the database object, a dag of frames is created based
on the "base frame" held in `AristoDbRef` and all database access
happens through this frame, which can be thought of as a consistent
point-in-time snapshot of the database based on a particular fork of the
chain.
In the code, "frame", "transaction" and "layer" is used to denote more
or less the same thing: a dag of stacked changes backed by the on-disk
database.
Although this is not a requirement, in practice each frame holds the
change set of a single block - as such, the frame and its ancestors
leading up to the on-disk state represents the state of the database
after that block has been applied.
"committing" means merging the changes to its parent frame so that the
difference between them is lost and only the cumulative changes remain -
this facility enables frames to be combined arbitrarily wherever they
are in the dag.
In particular, it becomes possible to consolidate a set of changes near
the base of the dag and commit those to disk without having to re-do the
in-memory frames built on top of them - this is useful for "flattening"
a set of changes during a base update and sending those to storage
without having to perform a block replay on top.
Looking at abstractions, a side effect of this change is that the KVT
and Aristo are brought closer together by considering them to be part of
the "same" atomic transaction set - the way the code gets organised,
applying a block and saving it to the kvt happens in the same "logical"
frame - therefore, discarding the frame discards both the aristo and kvt
changes at the same time - likewise, they are persisted to disk together
- this makes reasoning about the database somewhat easier but has the
downside of increased memory usage, something that perhaps will need
addressing in the future.
Because the code reasons more strictly about frames and the state of the
persisted database, it also makes it more visible where ForkedChain
should be used and where it is still missing - in particular, frames
represent a single branch of history while forkedchain manages multiple
parallel forks - user-facing services such as the RPC should use the
latter, ie until it has been finalized, a getBlock request should
consider all forks and not just the blocks in the canonical head branch.
Another advantage of this approach is that `AristoDbRef` conceptually
becomes more simple - removing its tracking of the "current" transaction
stack simplifies reasoning about what can go wrong since this state now
has to be passed around in the form of `AristoTxRef` - as such, many of
the tests and facilities in the code that were dealing with "stack
inconsistency" are now structurally prevented from happening. The test
suite will need significant refactoring after this change.
Once this change has been merged, there are several follow-ups to do:
* there's no mechanism for keeping frames up to date as they get
committed or rolled back - TODO
* naming is confused - many names for the same thing for legacy reason
* forkedchain support is still missing in lots of code
* clean up redundant logic based on previous designs - in particular the
debug and introspection code no longer makes sense
* the way change sets are stored will probably need revisiting - because
it's a stack of changes where each frame must be interrogated to find an
on-disk value, with a base distance of 128 we'll at minimum have to
perform 128 frame lookups for *every* database interaction - regardless,
the "dag-like" nature will stay
* dispose and commit are poorly defined and perhaps redundant - in
theory, one could simply let the GC collect abandoned frames etc, though
it's likely an explicit mechanism will remain useful, so they stay for
now
More about the changes:
* `AristoDbRef` gains a `txRef` field (todo: rename) that "more or less"
corresponds to the old `balancer` field
* `AristoDbRef.stack` is gone - instead, there's a chain of
`AristoTxRef` objects that hold their respective "layer" which has the
actual changes
* No more reasoning about "top" and "stack" - instead, each
`AristoTxRef` can be a "head" that "more or less" corresponds to the old
single-history `top` notion and its stack
* `level` still represents "distance to base" - it's computed from the
parent chain instead of being stored
* one has to be careful not to use frames where forkedchain was intended
- layers are only for a single branch of history!
* fix layer vtop after rollback
* engine fix
* Fix test_txpool
* Fix test_rpc
* Fix copyright year
* fix simulator
* Fix copyright year
* Fix copyright year
* Fix tracer
* Fix infinite recursion bug
* Remove aristo and kvt empty files
* Fic copyright year
* Fix fc chain_kvt
* ForkedChain refactoring
* Fix merge master conflict
* Fix copyright year
* Reparent txFrame
* Fix test
* Fix txFrame reparent again
* Cleanup and fix test
* UpdateBase bugfix and fix test
* Fixe newPayload bug discovered by hive
* Fix engine api fcu
* Clean up call template, chain_kvt, andn txguid
* Fix copyright year
* work around base block loading issue
* Add test
* Fix updateHead bug
* Fix updateBase bug
* Change func commitBase to proc commitBase
* Touch up and fix debug mode crash
---------
Co-authored-by: jangko <jangko128@gmail.com>
In block processing, depending on the complexity of a transaction and
hotness of caches etc, signature checking can actually make up the
majority of time needed to process a transaction (60% observed in some
randomly sampled block ranges).
Fortunately, this is a task that trivially can be offloaded to a task
pool similar to how nimbus-eth2 does it.
This PR introduces taskpools in the most simple way possible, by
performing signature checking concurrently with other TX processing,
assigning a taskpool task per TX effectively.
With this little trick, we're in gigagas land 🎉 on my laptop!
```
INF 2024-12-10 21:05:35.170+01:00 Imported blocks
blockNumber=3874817 b... mgps=1222.707 ...
```
Tests don't use the taskpool for now because it needs manual cleanup and
we don't have a good mechanism in place. Future PR:s should address this
by creating a common shutdown sequence that also closes and cleans up
other resources like the DB.
Co-authored-by: andri lim <jangko128@gmail.com>
* switch to Nim v2.0.12
* fix LruCache capitalization for styleCheck
* KzgProof/KzgCommitment for styleCheck
* TxEip4844 for styleCheck
* styleCheck issues in nimbus/beacon/payload_conv.nim
* ENode for styleCheck
* isOk for styleCheck
* some more styleCheck fixes
* more styleCheck fixes
---------
Co-authored-by: jangko <jangko128@gmail.com>
* prefer the spec-derived name where possible
* don't pass stateRoot to LedgerRef and friends (it doesn't do anything)
* add deprecation warning in graphql - it needs updating to use
forkedchain instead
* partial commit
* fixes
* remove converters too
* revert changes on nimbus_verified_proxy
* revert changes in converter
* revert changes(re-xport) in rpc_types
* update copyright year
* replace types in other binaries
* chain config bug
* fix rebase conflict imcomplete buffer
* fix more rebase buffers
* remove ditto types and converters
* fix the tests
* update copyright year
* init style for Hash256
https://github.com/status-im/nim-eth/pull/733 updates `Hash256` to
become an array instead of an object - unfortunately, nim does not allow
constructing arrays with `name()`, so this PR changes it to `default`
which works with both.
* lint
* Bump nim-eth, nim-web3, nimbus-eth2
- Replace std.Option with results.Opt
- Fields name changes
* More fixes
* Fix Portal stream async raises and portal testnet Opt usage
* Bump eth + nimbus-eth2 + more fixes related to eth_types changes
* Fix in utp test app and nimbus-eth2 bump
* Fix test_blockchain_json rebase conflict
* Fix EVMC block_timestamp conversion plus commentary
---------
Co-authored-by: kdeme <kim.demey@gmail.com>
* Remove exception from evm memory
* Remove exception from gas meter
* Remove exception from stack
* Remove exception from precompiles
* Remove exception from gas_costs
* Remove exception from op handlers
* Remove exception from op dispatcher
* Remove exception from call_evm
* Remove exception from EVM
* Fix tools and tests
* Remove exception from EVMC
* fix evmc
* Fix evmc
* Remove remnants of async evm stuff
* Remove superflous error handling
* Proc to func
* Fix errors detected by CI
* Fix EVM op call stack usage
* REmove exception handling from getVmState
* Better error message instead of just doAssert
* Remove unused validation
* Remove superflous catchRaise
* Use results.expect instead of unsafeValue
* Activate `LedgerRef` wrapper for `AccountsCache`
details:
`accounts_cache.nim` methods are indirectly processed by the wrapper
methods from `ledger.nim`.
This works for all sources except `test_state_db.nim` where the source
`accounts_cache.nim` is included (rather than imported) in order to
access objects privy to the very source.
* Provide facility to switch to a preselected `LedgerRef` type
details:
Can be set as suggestion when initialising `CommonRef`
* Update `CoreDb` test suite for better time tracking
details:
+ Allow time logging by pre-defined block intervals
+ Print `CoreDb`/`Ledger`profiling results (if enabled)
* Disable `TransactionID` related functions from `state_db.nim`
why:
Functions `getCommittedStorage()` and `updateOriginalRoot()` from
the `state_db` module are nowhere used. The emulation of a legacy
`TransactionID` type functionality is administratively expensive to
provide by `Aristo` (the legacy DB version is only partially
implemented, anyway).
As there is no other place where `TransactionID`s are used, they will
not be provided by the `Aristo` variant of the `CoreDb`. For the
legacy DB API, nothing will change.
* Fix copyright headers in source code
* Get rid of compiler warning
* Update Aristo code, remove unused `merge()` variant, export `hashify()`
why:
Adapt to upcoming `CoreDb` wrapper
* Remove synced tx feature from `Aristo`
why:
+ This feature allowed to synchronise transaction methods like begin,
commit, and rollback for a group of descriptors.
+ The feature is over engineered and not needed for `CoreDb`, neither
is it complete (some convergence features missing.)
* Add debugging helpers to `Kvt`
also:
Update database iterator, add count variable yield argument similar
to `Aristo`.
* Provide optional destructors for `CoreDb` API
why;
For the upcoming Aristo wrapper, this allows to control when certain
smart destruction and update can take place. The auto destructor works
fine in general when the storage/cache strategy is known and acceptable
when creating descriptors.
* Add update option for `CoreDb` API function `hash()`
why;
The hash function is typically used to get the state root of the MPT.
Due to lazy hashing, this might be not available on the `Aristo` DB.
So the `update` function asks for re-hashing the gurrent state changes
if needed.
* Update API tracking log mode: `info` => `debug
* Use shared `Kvt` descriptor in new Ledger API
why:
No need to create a new descriptor all the time
* Nimbus folder environment update
details:
* Integrated `CoreDbRef` for the sources in the `nimbus` sub-folder.
* The `nimbus` program does not compile yet as it needs the updates
in the parallel `stateless` sub-folder.
* Stateless environment update
details:
* Integrated `CoreDbRef` for the sources in the `stateless` sub-folder.
* The `nimbus` program compiles now.
* Premix environment update
details:
* Integrated `CoreDbRef` for the sources in the `premix` sub-folder.
* Fluffy environment update
details:
* Integrated `CoreDbRef` for the sources in the `fluffy` sub-folder.
* Tools environment update
details:
* Integrated `CoreDbRef` for the sources in the `tools` sub-folder.
* Nodocker environment update
details:
* Integrated `CoreDbRef` for the sources in the
`hive_integration/nodocker` sub-folder.
* Tests environment update
details:
* Integrated `CoreDbRef` for the sources in the `tests` sub-folder.
* The unit tests compile and run cleanly now.
* Generalise `CoreDbRef` to any `select_backend` supported database
why:
Generalisation was just missed due to overcoming some compiler oddity
which was tied to rocksdb for testing.
* Suppress compiler warning for `newChainDB()`
why:
Warning was added to this function which must be wrapped so that
any `CatchableError` is re-raised as `Defect`.
* Split off persistent `CoreDbRef` constructor into separate file
why:
This allows to compile a memory only database version without linking
the backend library.
* Use memory `CoreDbRef` database by default
detail:
Persistent DB constructor needs to import `db/core_db/persistent
why:
Most tests use memory DB anyway. This avoids linking `-lrocksdb` or
any other backend by default.
* fix `toLegacyBackend()` availability check
why:
got garbled after memory/persistent split.
* Clarify raw access to MPT for snap sync handler
why:
Logically, `kvt` is not the raw access for the hexary trie (although
this holds for the legacy database)
simplify EVM and delegete those things to accounts cache.
also no more manual state clearing, accounts cache will be
responsible for both collecting touched account and perform
state clearing.
* Refactoring in preparation for time-based forking.
* Timestamp-based hard-fork-transition.
* Workaround SideEffect issue / compiler bug for both failing locations in Portal history code
---------
Co-authored-by: kdeme <kim.demey@gmail.com>
* Reduce Nim 1.6 compiler warnings/hints for Fluffy and Nimbus proxy
Mostly raises Defect removals, TaintedString removal and some
unnecessary imports.
Also updating the copyright years alongside.
* Further reduce Nim 1.6 compiler warnings/hints for Nimbus
* Redesign of BaseVMState descriptor
why:
BaseVMState provides an environment for executing transactions. The
current descriptor also provides data that cannot generally be known
within the execution environment, e.g. the total gasUsed which is
available not before after all transactions have finished.
Also, the BaseVMState constructor has been replaced by a constructor
that does not need pre-initialised input of the account database.
also:
Previous constructor and some fields are provided with a deprecated
annotation (producing a lot of noise.)
* Replace legacy directives in production sources
* Replace legacy directives in unit test sources
* fix CI (missing premix update)
* Remove legacy directives
* chase CI problem
* rebased
* Re-introduce 'AccountsCache' constructor optimisation for 'BaseVmState' re-initialisation
why:
Constructing a new 'AccountsCache' descriptor can be avoided sometimes
when the current state root is properly positioned already. Such a
feature existed already as the update function 'initStateDB()' for the
'BaseChanDB' where the accounts cache was linked into this desctiptor.
The function 'initStateDB()' was removed and re-implemented into the
'BaseVmState' constructor without optimisation. The old version was of
restricted use as a wrong accounts cache state would unconditionally
throw an exception rather than conceptually ask for a remedy.
The optimised 'BaseVmState' re-initialisation has been implemented for
the 'persistBlocks()' function.
also:
moved some test helpers to 'test/replay' folder
* Remove unused & undocumented fields from Chain descriptor
why:
Reduces attack surface in general & improves reading the code.
details:
1. The check for cumulativeGasUsed + tx.gasLimit <= header.gasLimit
makes neither sense nor is it part of the Eip1559 specs. Nevertheless
a check tx.gasLimit <= header.gasLimit is added to satisfy some
unit test (see comments in validateTransaction() body.)
2. As a replacement check for the one removed in 1, a check for
cumulativeGasUsed + gasBurned <= header.gasLimit has been added
(see comments in processTransactionImpl() body.)
3. Prototypes for processTransaction() variants have been cleaned up and
commented.
why:
Detail 1. in particular produces an error for tightly packed blocks when
the last tx in the list has a generous gasLimit.
previously, every time the VMState was created, it will also create
new stateDB, and this action will nullify the advantages of cached accounts.
the new changes will conserve the accounts cache if the executed blocks
are contiguous. if not the stateDB need to be reinited.
this changes also allow rpcCallEvm and rpcEstimateGas executed properly
using current stateDB instead of creating new one each time they are called.
The common forks list was already used, redirected via `vm_forks` for
historical compatibility. Remove the old `vm_forks` now and divert all imports
to the common forks list outside the EVM.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
The rationale in EIP-6[1] for changing names to `selfDestruct` applies to code
as much as it does to specs. Also, Ethereum uses the new names consistently,
so it's useful for our code to match the terms used in later EIP specs and
testsuite entries.
This change is straightforward, and is a prerequisite for patches to come that
do things with the `selfDestruct` fields.
[1] https://eips.ethereum.org/EIPS/eip-6
Hudson Jameson, "EIP-6: Renaming SUICIDE opcode," Ethereum Improvement
Proposals, no. 6, November 2015.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
usually, there is always a sender around `getRecipient` call.
no need to recalculate sender. and more important, in some of
JSON-RPC/GraphQL call, the sender is come from `rpcCallData`,
not from `tx.getSender`. or in ohter situation when the tx is
an unsigned tx, without `r,s,v` fields to calculate sender.
disableParamFiltering() is called in test_all, so its ok when
called via test_all. but when test_generalstate_json or
test_blockchain_json is called independently, and we are using
command line switch, the default param handler from std/unittest
will interfere. hence need to disable it.
